Ron,
Attached is the third revision of the CN400/EPIA-N(L) patch for CB V2.
Patch should work against r4381 (or later ?)
This version now boots all of the way through to attempting to launch a payload (I'm trying FILO right now), where it falls over with exception 6 (invalid opcode)
The coreboot_table issue seems to have been automagically resolved by the latest core files.
It may still be that the reason for the payload not starting is down to some issue with the tables initialising, I'll look closer at that.
Signed-off-by: Jon Harrison bothlyn@blueyonder.co.uk
-----Original Message----- From: ron minnich [mailto:rminnich@gmail.com] Sent: 30 June 2009 16:44 To: Harrison, Jon (SELEX GALILEO, UK) Subject: Re: [coreboot] C3/CN400 Support - coreboot_tables
*** WARNING ***
This message has originated outside your organisation, either from an external partner or the Global Internet. Keep this in mind if you answer this message.
is your port visible anywhere?
[snip]
ron
SELEX Sensors and Airborne Systems Limited Registered Office: Sigma House, Christopher Martin Road, Basildon, Essex SS14 3EL A company registered in England & Wales. Company no. 02426132 ******************************************************************** This email and any attachments are confidential to the intended recipient and may also be privileged. If you are not the intended recipient please delete it from your system and notify the sender. You should not copy it or use it for any purpose nor disclose or distribute its contents to any other person. ********************************************************************
-
Harrison, Jon (SELEX GALILEO, UK)