RE: Freebios2 recovery progress...

[YhLu]

I will test that on s2885.

I suspect that will need MEM enable too.

YH

-----Original Message-----
From: [e-mail] [mailto:[e-mail]] 
Sent: Thursday, October 21, 2004 11:39 AM
To: YhLu
Cc: LinuxBIOS
Subject: Re: Freebios2 recovery progress...

YhLu  writes:
> You can not test that in arima board. Because all device on 8131 is using
> ioapic in amd8111.

I can't test that it works but I can test that the bits are getting
set by running lspci.   And that is how I tested.  The bus
master bit is still getting set.  I just move the location.

Eric