Re: [coreboot] pci device memory allocation problem

> > I noticed this problem, if certian devices are disabled (like onboard
> > vga for example). The other enabled devices try to use 0xfec00000 for
> > memory allocation, causing APIC to fail.
> > You just need to add a Signed-Off-By as stated in the development
> >  guidelines. In the mean time I will test it and if all goes well you'll
>
> get
> > my Acked-by, and then it can be commited.
>
> Oh, I see.
>
> Signed-off-by: Aaron Lwe

Acked-by: Joseph Smith

Great job Aaron! Works great, attached is the bootlog with vga (device 2.0) completly disabled, and coreboot is not trying to allocate the 0xfec00000 range.

commited in r3265

pci device memory allocation problem

[Carl-Daniel Hailfinger]

On 25.04.2008 04:03, [e-mail] wrote:
> > > I noticed this problem, if certian devices are disabled (like onboard
> > > vga for example). The other enabled devices try to use 0xfec00000 for
> > > memory allocation, causing APIC to fail.
> > > You just need to add a Signed-Off-By as stated in the development
> > >  guidelines. In the mean time I will test it and if all goes well you'll
> >
> > get
> > > my Acked-by, and then it can be commited.
> >
> > Oh, I see.
> >
> > Signed-off-by: Aaron Lwe
>
> Acked-by: Joseph Smith
>
> Great job Aaron! Works great, attached is the bootlog with vga (device 2.0) completly disabled, and coreboot is not trying to allocate the 0xfec00000 range.
>
> commited in r3265

Can you check whether this should be applied to the v3 code as well?

Thanks!
Regards,
Carl-Daniel