Dear coreboot readers!
This is the automatic build system of coreboot.
The developer "uwe" checked in revision 4398 to the coreboot repository. This caused the following changes:
Change Log: Various Intel 82810/82810E changes which allow onboard VGA to work. At the same time also make the 82810 code handle 82810E.
- Set SMRAM register according to CONFIG_VIDEO_MB value: - 512 means 512 KB - 1 means 1 MB - Every other value for CONFIG_VIDEO_MB (e.g. 0) disables VGA. This is not very clean, changing CONFIG_VIDEO_MB to CONFIG_VIDEO_KB in a future patch may be nicer.
- Set MISSC2 register bits as required per datasheet to make VGA work. The code handles both 82810 and 82810E.
- northbridge.c: Add __pci_driver entry for the Intel 82810E.
Also:
- Rename PAM register #define to PAMR as per datasheet.
- Drop unused/commented code for now.
- Don't explicitly set GMCHCFG for now, the default works ok. We'll have to figure out the proper/ideal settings later.
The code is based on a patch from Elia Yehuda z4ziggy@gmail.com but has been modified quite a bit for correctness and minimalism.
Tested on hardware with a slightly modified MS-6178 target, patches to enable onboard-VGA for MS-6178 will follow.
Signed-off-by: Elia Yehuda z4ziggy@gmail.com Signed-off-by: Uwe Hermann uwe@hermann-uwe.de Acked-by: Uwe Hermann uwe@hermann-uwe.de
Build Log: Compilation of asus:mew-am has been broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4398&device=mew-am&... Compilation of asus:mew-vm has been broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4398&device=mew-vm&... Compilation of motorola:sandpointx3_altimus_mpc7410 is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4398&device=sandpointx3... Compilation of msi:ms6178 has been broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4398&device=ms6178&... Compilation of nec:powermate2000 has been broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4398&device=powermate20... Compilation of via:epia-m700 is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4398&device=epia-m700&a...
If something broke during this checkin please be a pain in uwe's neck until the issue is fixed.
If this issue is not fixed within 24h the revision should be backed out.
Best regards, coreboot automatic build system
-
coreboot information