Hi. Still waiting for our burocracy to buy cwlinux motherboards, we got a pcchips 810 lmr motherboard.
I've download the prepackaged image from cwlinux website and the cvs version of freebios. I flashed the file:
ftp.cwlinux.com/pub/downloads/linuxbios-sdk/images/romimages/m810-ide.rom
on the hard disk, connected as hda, I've made a partition hda1 of few MB and formatted as ext2. Here I've placed a kernel compiled from vanilla 2.4.20 sources and processed with:
mkelfImage --kernel=/usr/src/linux-2.4.20/linux/arch/i386/boot/bzImage --command-line="console=ttyS0,115200 CONSOLE=ttyS0,115200 root=/dev/hda1 video=sisfb:640x480-8@60,font:VGA8x16" --output=kernel.elf
I've renamed the kernel.elf image in "kernel" and I put it on hda1. hda2 is my root fs.
When I turn the computer on, I can see (as soon as the monitor resumes from the silly dpms powerdown) a tux logo and a cursor flashing.
On a serial terminal I get the attached log.
At this point caps lock and no scroll leds are blinking.
Frame buffer seems to work well! Why isn't my system booting properly?
bye thank you as
0
LinuxBIOS-1.0.0 Tue Aug 13 16:28:27 HKT 2002 starting... Copying LinuxBIOS to ram. Jumping to LinuxBIOS.LinuxBIOS-1.0.0 Tue Aug 13 16:28:27 HKT 2002 booting... Finding PCI configuration type. PCI: Using configuration type 1 handle_superio start, s 0000b040 nsuperio 1 s->super 0000b318 handle_superio Pass 0, check #0, s 0000b040 s->super 0000b318 handle_superio: Pass 0, Superio SiS 950 handle_superio port 0x0, defaultport 0x2e handle_superio Using port 0x2e handle_superio Pass 0, done #0 handle_superio done Scanning PCI bus...PCI: pci_scan_bus for bus 0 PCI: 00:00.0 [1039/0730] PCI: 00:00.1 [1039/5513] PCI: 00:01.0 [1039/0008] PCI: 00:01.1 [1039/0900] PCI: 00:01.2 [1039/7001] PCI: 00:01.3 [1039/7001] PCI: 00:01.4 [1039/7018] PCI: 00:01.6 [1039/7013] PCI: 00:02.0 [1039/0001] PCI: pci_scan_bus for bus 1 PCI: 01:00.0 [1039/6300] PCI: pci_scan_bus returning with max=01 PCI: pci_scan_bus returning with max=01 done totalram: 120M Initializing CPU #0 Enabling cache... Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) type: WB DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 64MB, type WB Setting variable MTRR 1, base: 64MB, range: 32MB, type WB Setting variable MTRR 2, base: 96MB, range: 16MB, type WB Setting variable MTRR 3, base: 112MB, range: 8MB, type WB DONE variable MTRRs Clear out the extra MTRR's call intel_enable_fixed_mtrr() call intel_enable_var_mtrr() Leave setup_mtrrs done.
Max cpuid index : 1 Vendor ID : AuthenticAMD Processor Type : 0x00 Processor Family : 0x06 Processor Model : 0x08 Processor Mask : 0x00 Processor Stepping : 0x00 Feature flags : 0x0183f9ff
MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled
Disabling local apic...done. CPU #0 Initialized Allocating PCI resources... ASSIGN RESOURCES, bus 0 PCI: 00:00.0 10 <- [0xf8000000 - 0xfbffffff] mem PCI: 00:00.1 10 <- [0x00002c90 - 0x00002c93] io PCI: 00:00.1 14 <- [0x00002ca0 - 0x00002ca3] io PCI: 00:00.1 18 <- [0x00002cb0 - 0x00002cb3] io PCI: 00:00.1 1c <- [0x00002cc0 - 0x00002cc3] io PCI: 00:00.1 20 <- [0x00002c80 - 0x00002c8f] io PCI: 00:01.1 10 <- [0x00002000 - 0x000020ff] io PCI: 00:01.1 14 <- [0xfc100000 - 0xfc100fff] mem PCI: 00:01.2 10 <- [0xfc101000 - 0xfc101fff] mem PCI: 00:01.3 10 <- [0xfc102000 - 0xfc102fff] mem PCI: 00:01.4 10 <- [0x00002400 - 0x000024ff] io PCI: 00:01.4 14 <- [0xfc103000 - 0xfc103fff] mem PCI: 00:01.6 10 <- [0x00002800 - 0x000028ff] io PCI: 00:01.6 14 <- [0x00002c00 - 0x00002c7f] io PCI: 00:02.0 1c <- [0x00001000 - 0x00001fff] bus 1 ÿÿÿÿÿÿio PCI: 00:02.0 24 <- [0xf0000000 - 0xf7ffffff] bus 1 ÿÿÿÿÿÿprefmem PCI: 00:02.0 20 <- [0xfc000000 - 0xfc0fffff] bus 1 ÿÿÿÿÿÿmem ASSIGN RESOURCES, bus 1 PCI: 01:00.0 10 <- [0xf0000000 - 0xf7ffffff] prefmem PCI: 01:00.0 14 <- [0xfc000000 - 0xfc01ffff] mem PCI: 01:00.0 18 <- [0x00001000 - 0x0000107f] io Allocating VGA resource done. Enabling PCI resourcess...PCI: 00:00.0 cmd <- 07 PCI: 00:00.1 cmd <- 01 PCI: 00:01.0 cmd <- 0c PCI: 00:01.1 cmd <- 03 PCI: 00:01.2 cmd <- 02 PCI: 00:01.3 cmd <- 02 PCI: 00:01.4 cmd <- 03 PCI: 00:01.6 cmd <- 01 PCI: 00:02.0 cmd <- 27 PCI: 01:00.0 cmd <- 03 done. Initializing PCI devices... PCI devices initialized Enabled in SIS 503 regs 0x40 and 0x45 handle_superio start, s 0000b040 nsuperio 1 s->super 0000b318 handle_superio Pass 1, check #0, s 0000b040 s->super 0000b318 handle_superio: Pass 1, Superio SiS 950 handle_superio port 0x2e, defaultport 0x2e handle_superio Using port 0x2e handle_superio Pass 1, done #0 handle_superio done PCCHIPS M810LMR (and similar)...Entering the initregs process Southbridge fixup done for SIS 503 handle_superio start, s 0000b040 nsuperio 1 s->super 0000b318 handle_superio Pass 2, check #0, s 0000b040 s->super 0000b318 handle_superio: Pass 2, Superio SiS 950 handle_superio port 0x2e, defaultport 0x2e handle_superio Using port 0x2e Call finishup handle_superio Pass 2, done #0 handle_superio done Copying IRQ routing tables to 0xf0000...done. Wrote linuxbios table at: 00000500 - 0000066c checksum 8a04
Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.2
37:init_bytes() - zkernel_start:0xfffc0000 zkernel_mask:0x0000ffff Found ELF candiate at offset 0 New segment addr 0x400000 size 0xcba0 offset 0x60 filesize 0x8789 (cleaned up) New segment addr 0x400000 size 0xcba0 offset 0x60 filesize 0x8789 Loading Segment: addr: 0x0000000000400000 memsz: 0x000000000000cba0 filesz: 0x0000000000008789 Clearing Segment: addr: 0x0000000000408789 memsz: 0x0000000000004417 Jumping to boot code ROM segment 0x0000 length 0x0000 reloc 0x0000 Etherboot 5.0.6 (GPL) ELF for [SIS900] Boot from (N)etwork or from (L)ocal? clocks_per_tick = 784464 N I am now initializing the ide system init_drive sectors_per_track = [63], num_heads = [16],num_cylinders=[16383], num_sectors = [117231408] LBA mode supported
Boot: (hd0,0)/kernel
part=[0], part_start=[0x0000003f, 63] valid partition: current_slice [131] (ELF)... done Unknown bootloader class! type=0x000101C0 data=0x000103BE Firmware type: LinuxBIOS 0
LinuxBIOS-1.0.0 Tue Aug 13 16:28:27 HKT 2002 starting... Copying LinuxBIOS to ram. Jumping to LinuxBIOS.LinuxBIOS-1.0.0 Tue Aug 13 16:28:27 HKT 2002 booting... Finding PCI configuration type. PCI: Using configuration type 1 handle_superio start, s 0000b040 nsuperio 1 s->super 0000b318 handle_superio Pass 0, check #0, s 0000b040 s->super 0000b318 handle_superio: Pass 0, Superio SiS 950 handle_superio port 0x0, defaultport 0x2e handle_superio Using port 0x2e handle_superio Pass 0, done #0 handle_superio done Scanning PCI bus...PCI: pci_scan_bus for bus 0 PCI: 00:00.0 [1039/0730] PCI: 00:00.1 [1039/5513] PCI: 00:01.0 [1039/0008] PCI: 00:01.1 [1039/0900] PCI: 00:01.2 [1039/7001] PCI: 00:01.3 [1039/7001] PCI: 00:01.4 [1039/7018] PCI: 00:01.6 [1039/7013] PCI: 00:02.0 [1039/0001] PCI: pci_scan_bus for bus 1 PCI: 01:00.0 [1039/6300] PCI: pci_scan_bus returning with max=01 PCI: pci_scan_bus returning with max=01 done totalram: 120M Initializing CPU #0 Enabling cache... Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) type: WB DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 64MB, type WB Setting variable MTRR 1, base: 64MB, range: 32MB, type WB Setting variable MTRR 2, base: 96MB, range: 16MB, type WB Setting variable MTRR 3, base: 112MB, range: 8MB, type WB DONE variable MTRRs Clear out the extra MTRR's call intel_enable_fixed_mtrr() call intel_enable_var_mtrr() Leave setup_mtrrs done.
Max cpuid index : 1 Vendor ID : AuthenticAMD Processor Type : 0x00 Processor Family : 0x06 Processor Model : 0x08 Processor Mask : 0x00 Processor Stepping : 0x00 Feature flags : 0x0183f9ff
MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled
Disabling local apic...done. CPU #0 Initialized Allocating PCI resources... ASSIGN RESOURCES, bus 0 PCI: 00:00.0 10 <- [0xf8000000 - 0xfbffffff] mem PCI: 00:00.1 10 <- [0x00002c90 - 0x00002c93] io PCI: 00:00.1 14 <- [0x00002ca0 - 0x00002ca3] io PCI: 00:00.1 18 <- [0x00002cb0 - 0x00002cb3] io PCI: 00:00.1 1c <- [0x00002cc0 - 0x00002cc3] io PCI: 00:00.1 20 <- [0x00002c80 - 0x00002c8f] io PCI: 00:01.1 10 <- [0x00002000 - 0x000020ff] io PCI: 00:01.1 14 <- [0xfc100000 - 0xfc100fff] mem PCI: 00:01.2 10 <- [0xfc101000 - 0xfc101fff] mem PCI: 00:01.3 10 <- [0xfc102000 - 0xfc102fff] mem PCI: 00:01.4 10 <- [0x00002400 - 0x000024ff] io PCI: 00:01.4 14 <- [0xfc103000 - 0xfc103fff] mem PCI: 00:01.6 10 <- [0x00002800 - 0x000028ff] io PCI: 00:01.6 14 <- [0x00002c00 - 0x00002c7f] io PCI: 00:02.0 1c <- [0x00001000 - 0x00001fff] bus 1 ÿÿÿÿÿÿio PCI: 00:02.0 24 <- [0xf0000000 - 0xf7ffffff] bus 1 ÿÿÿÿÿÿprefmem PCI: 00:02.0 20 <- [0xfc000000 - 0xfc0fffff] bus 1 ÿÿÿÿÿÿmem ASSIGN RESOURCES, bus 1 PCI: 01:00.0 10 <- [0xf0000000 - 0xf7ffffff] prefmem PCI: 01:00.0 14 <- [0xfc000000 - 0xfc01ffff] mem PCI: 01:00.0 18 <- [0x00001000 - 0x0000107f] io Allocating VGA resource done. Enabling PCI resourcess...PCI: 00:00.0 cmd <- 07 PCI: 00:00.1 cmd <- 01 PCI: 00:01.0 cmd <- 0c PCI: 00:01.1 cmd <- 03 PCI: 00:01.2 cmd <- 02 PCI: 00:01.3 cmd <- 02 PCI: 00:01.4 cmd <- 03 PCI: 00:01.6 cmd <- 01 PCI: 00:02.0 cmd <- 27 PCI: 01:00.0 cmd <- 03 done. Initializing PCI devices... PCI devices initialized Enabled in SIS 503 regs 0x40 and 0x45 handle_superio start, s 0000b040 nsuperio 1 s->super 0000b318 handle_superio Pass 1, check #0, s 0000b040 s->super 0000b318 handle_superio: Pass 1, Superio SiS 950 handle_superio port 0x2e, defaultport 0x2e handle_superio Using port 0x2e handle_superio Pass 1, done #0 handle_superio done PCCHIPS M810LMR (and similar)...Entering the initregs process Southbridge fixup done for SIS 503 handle_superio start, s 0000b040 nsuperio 1 s->super 0000b318 handle_superio Pass 2, check #0, s 0000b040 s->super 0000b318 handle_superio: Pass 2, Superio SiS 950 handle_superio port 0x2e, defaultport 0x2e handle_superio Using port 0x2e Call finishup handle_superio Pass 2, done #0 handle_superio done Copying IRQ routing tables to 0xf0000...done. Wrote linuxbios table at: 00000500 - 0000066c checksum 8a04
Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.2
37:init_bytes() - zkernel_start:0xfffc0000 zkernel_mask:0x0000ffff Found ELF candiate at offset 0 New segment addr 0x400000 size 0xcba0 offset 0x60 filesize 0x8789 (cleaned up) New segment addr 0x400000 size 0xcba0 offset 0x60 filesize 0x8789 Loading Segment: addr: 0x0000000000400000 memsz: 0x000000000000cba0 filesz: 0x0000000000008789 Clearing Segment: addr: 0x0000000000408789 memsz: 0x0000000000004417 Jumping to boot code ROM segment 0x0000 length 0x0000 reloc 0x0000 Etherboot 5.0.6 (GPL) ELF for [SIS900] Boot from (N)etwork or from (L)ocal? clocks_per_tick = 784576 N I am now initializing the ide system init_drive sectors_per_track = [63], num_heads = [16],num_cylinders=[16383], num_sectors = [117231408] LBA mode supported
Boot: (hd0,0)/kernel
part=[0], part_start=[0x0000003f, 63] valid partition: current_slice [131] (ELF)... done Unknown bootloader class! type=0x000101C0 data=0x000103BE Firmware type: LinuxBIOS
Can you send the kernel config also??
-Andrew
Andrew Ip wrote:
Can you send the kernel config also??
I'm not on that system now... I will try to get the kernel config asap. I wonder if I should apply some patch or configure some specific option. If yes, please do.
The kernel is not very thin because we need many drivers for video acquisition etc. I've setup the sis drivers for IDE, agp/dri, sound and framebuffer (a regular boot with normal BIOS and the append line in LILO shows the framebuffer without problems)
Should I use a kernel from your ftp?
thank you as
Andrew Ip wrote:
Can you send the kernel config also??
I attache the kenrenl config I've used (for a VANILLA 2.4.20)
bye and thank you as
# # Automatically generated by make menuconfig: don't edit # CONFIG_X86=y # CONFIG_SBUS is not set CONFIG_UID16=y
# # Code maturity level options # CONFIG_EXPERIMENTAL=y
# # Loadable module support # CONFIG_MODULES=y # CONFIG_MODVERSIONS is not set CONFIG_KMOD=y
# # Processor type and features # # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set CONFIG_MK7=y # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_HAS_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_USE_3DNOW=y CONFIG_X86_PGE=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_F00F_WORKS_OK=y CONFIG_X86_MCE=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_HIGHMEM is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_SMP is not set # CONFIG_X86_UP_APIC is not set # CONFIG_X86_UP_IOAPIC is not set # CONFIG_X86_TSC_DISABLE is not set CONFIG_X86_TSC=y
# # General setup # CONFIG_NET=y CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_ISA=y CONFIG_PCI_NAMES=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_HOTPLUG is not set # CONFIG_PCMCIA is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set # CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_PM is not set # CONFIG_ACPI is not set # CONFIG_APM is not set
# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set
# # Parallel port support # # CONFIG_PARPORT is not set
# # Plug and Play configuration # # CONFIG_PNP is not set # CONFIG_ISAPNP is not set
# # Block devices # # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_CISS_SCSI_TAPE is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_BLK_STATS is not set
# # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # CONFIG_BLK_DEV_MD is not set # CONFIG_MD_LINEAR is not set # CONFIG_MD_RAID0 is not set # CONFIG_MD_RAID1 is not set # CONFIG_MD_RAID5 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_BLK_DEV_LVM is not set
# # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set # CONFIG_NETLINK_DEV is not set # CONFIG_NETFILTER is not set # CONFIG_FILTER is not set CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_INET_ECN is not set # CONFIG_SYN_COOKIES is not set # CONFIG_IPV6 is not set # CONFIG_KHTTPD is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set
# # Appletalk devices # # CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_LLC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set
# # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set
# # Network testing # # CONFIG_NET_PKTGEN is not set
# # Telephony Support # # CONFIG_PHONE is not set # CONFIG_PHONE_IXJ is not set # CONFIG_PHONE_IXJ_PCMCIA is not set
# # ATA/IDE/MFM/RLL support # CONFIG_IDE=y
# # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=y # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_IDEDISK_STROKE is not set # CONFIG_BLK_DEV_IDEDISK_VENDOR is not set # CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set # CONFIG_BLK_DEV_IDEDISK_IBM is not set # CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set # CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set # CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set # CONFIG_BLK_DEV_IDEDISK_WD is not set # CONFIG_BLK_DEV_COMMERIAL is not set # CONFIG_BLK_DEV_TIVO is not set # CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=y # CONFIG_IDE_TASK_IOCTL is not set # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_CMD640_ENHANCED is not set # CONFIG_BLK_DEV_ISAPNP is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_PCI_WIP is not set # CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set # CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set CONFIG_BLK_DEV_ADMA=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_AEC62XX_TUNING is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_WDC_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_AMD74XX_OVERRIDE is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_CMD680 is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_HPT34X_AUTODMA is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_PIIX_TUNING is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_PDC202XX is not set # CONFIG_PDC202XX_BURST is not set # CONFIG_PDC202XX_FORCE is not set # CONFIG_BLK_DEV_SVWKS is not set CONFIG_BLK_DEV_SIS5513=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_CHIPSETS is not set CONFIG_IDEDMA_AUTO=y # CONFIG_IDEDMA_IVB is not set # CONFIG_DMA_NONPCI is not set CONFIG_BLK_DEV_IDE_MODES=y # CONFIG_BLK_DEV_ATARAID is not set # CONFIG_BLK_DEV_ATARAID_PDC is not set # CONFIG_BLK_DEV_ATARAID_HPT is not set
# # SCSI support # CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SD_EXTRA_DEVS=40 # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_SR_EXTRA_DEVS=2 CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_DEBUG_QUEUES is not set # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set
# # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_NCR53C7xx is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_NCR53C8XX is not set # CONFIG_SCSI_SYM53C8XX is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_DEBUG is not set
# # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_BOOT is not set # CONFIG_FUSION_ISENSE is not set # CONFIG_FUSION_CTL is not set # CONFIG_FUSION_LAN is not set
# # IEEE 1394 (FireWire) support (EXPERIMENTAL) # # CONFIG_IEEE1394 is not set
# # I2O device support # # CONFIG_I2O is not set # CONFIG_I2O_PCI is not set # CONFIG_I2O_BLOCK is not set # CONFIG_I2O_LAN is not set # CONFIG_I2O_SCSI is not set # CONFIG_I2O_PROC is not set
# # Network device support # CONFIG_NETDEVICES=y
# # ARCnet devices # # CONFIG_ARCNET is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_ETHERTAP is not set
# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_SUNLANCE is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNBMAC is not set # CONFIG_SUNQE is not set # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_CS89x0 is not set # CONFIG_TULIP is not set # CONFIG_DE4X5 is not set # CONFIG_DGRS is not set # CONFIG_DM9102 is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_LNE390 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_NE3210 is not set # CONFIG_ES3210 is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set CONFIG_SIS900=y # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_SUNDANCE_MMIO is not set # CONFIG_TLAN is not set # CONFIG_TC35815 is not set # CONFIG_VIA_RHINE is not set # CONFIG_VIA_RHINE_MMIO is not set # CONFIG_WINBOND_840 is not set # CONFIG_NET_POCKET is not set
# # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_MYRI_SBUS is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set
# # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set
# # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set
# # Wan interfaces # # CONFIG_WAN is not set
# # Amateur Radio support # # CONFIG_HAMRADIO is not set
# # IrDA (infrared) support # # CONFIG_IRDA is not set
# # ISDN subsystem # # CONFIG_ISDN is not set
# # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set
# # Input core support # CONFIG_INPUT=y CONFIG_INPUT_KEYBDEV=y CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=y
# # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=y # CONFIG_SERIAL_CONSOLE is not set # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_UNIX98_PTYS is not set
# # I2C support # CONFIG_I2C=y CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_PHILIPSPAR is not set # CONFIG_I2C_ELV is not set # CONFIG_I2C_VELLEMAN is not set # CONFIG_I2C_ALGOPCF is not set CONFIG_I2C_CHARDEV=y CONFIG_I2C_PROC=y
# # Mice # # CONFIG_BUSMOUSE is not set CONFIG_MOUSE=y CONFIG_PSMOUSE=y # CONFIG_82C710_MOUSE is not set # CONFIG_PC110_PAD is not set # CONFIG_MK712_MOUSE is not set
# # Joysticks # # CONFIG_INPUT_GAMEPORT is not set # CONFIG_INPUT_NS558 is not set # CONFIG_INPUT_LIGHTNING is not set # CONFIG_INPUT_PCIGAME is not set # CONFIG_INPUT_CS461X is not set # CONFIG_INPUT_EMU10K1 is not set # CONFIG_INPUT_SERIO is not set # CONFIG_INPUT_SERPORT is not set # CONFIG_INPUT_ANALOG is not set # CONFIG_INPUT_A3D is not set # CONFIG_INPUT_ADI is not set # CONFIG_INPUT_COBRA is not set # CONFIG_INPUT_GF2K is not set # CONFIG_INPUT_GRIP is not set # CONFIG_INPUT_INTERACT is not set # CONFIG_INPUT_TMDC is not set # CONFIG_INPUT_SIDEWINDER is not set # CONFIG_INPUT_IFORCE_USB is not set # CONFIG_INPUT_IFORCE_232 is not set # CONFIG_INPUT_WARRIOR is not set # CONFIG_INPUT_MAGELLAN is not set # CONFIG_INPUT_SPACEORB is not set # CONFIG_INPUT_SPACEBALL is not set # CONFIG_INPUT_STINGER is not set # CONFIG_INPUT_DB9 is not set # CONFIG_INPUT_GAMECON is not set # CONFIG_INPUT_TURBOGRAFX is not set # CONFIG_QIC02_TAPE is not set
# # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_AMD_RNG is not set # CONFIG_INTEL_RNG is not set # CONFIG_AMD_PM768 is not set CONFIG_NVRAM=y CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set
# # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=y # CONFIG_AGP_INTEL is not set # CONFIG_AGP_I810 is not set # CONFIG_AGP_VIA is not set # CONFIG_AGP_AMD is not set # CONFIG_AGP_AMD_8151 is not set CONFIG_AGP_SIS=y # CONFIG_AGP_ALI is not set # CONFIG_AGP_SWORKS is not set CONFIG_DRM=y # CONFIG_DRM_OLD is not set CONFIG_DRM_NEW=y # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set # CONFIG_DRM_RADEON is not set # CONFIG_DRM_I810 is not set # CONFIG_DRM_I810_XFREE_41 is not set # CONFIG_DRM_I830 is not set # CONFIG_DRM_MGA is not set CONFIG_DRM_SIS=y # CONFIG_MWAVE is not set
# # Multimedia devices # CONFIG_VIDEO_DEV=y
# # Video For Linux # CONFIG_VIDEO_PROC_FS=y # CONFIG_I2C_PARPORT is not set CONFIG_VIDEO_BT848=y # CONFIG_VIDEO_PMS is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_SAA5249 is not set # CONFIG_TUNER_3036 is not set # CONFIG_VIDEO_STRADIS is not set # CONFIG_VIDEO_ZORAN is not set # CONFIG_VIDEO_ZORAN_BUZ is not set # CONFIG_VIDEO_ZORAN_DC10 is not set # CONFIG_VIDEO_ZORAN_LML33 is not set # CONFIG_VIDEO_ZR36120 is not set # CONFIG_VIDEO_MEYE is not set
# # Radio Adapters # # CONFIG_RADIO_CADET is not set # CONFIG_RADIO_RTRACK is not set # CONFIG_RADIO_RTRACK2 is not set # CONFIG_RADIO_AZTECH is not set # CONFIG_RADIO_GEMTEK is not set # CONFIG_RADIO_GEMTEK_PCI is not set # CONFIG_RADIO_MAXIRADIO is not set # CONFIG_RADIO_MAESTRO is not set # CONFIG_RADIO_MIROPCM20 is not set # CONFIG_RADIO_MIROPCM20_RDS is not set # CONFIG_RADIO_SF16FMI is not set # CONFIG_RADIO_TERRATEC is not set # CONFIG_RADIO_TRUST is not set # CONFIG_RADIO_TYPHOON is not set # CONFIG_RADIO_ZOLTRIX is not set
# # File systems # # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_ADFS_FS is not set # CONFIG_ADFS_FS_RW is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BEFS_DEBUG is not set # CONFIG_BFS_FS is not set CONFIG_EXT3_FS=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_FAT_FS is not set # CONFIG_MSDOS_FS is not set # CONFIG_UMSDOS_FS is not set # CONFIG_VFAT_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set CONFIG_TMPFS=y CONFIG_RAMFS=y CONFIG_ISO9660_FS=y # CONFIG_JOLIET is not set # CONFIG_ZISOFS is not set # CONFIG_JFS_FS is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set # CONFIG_MINIX_FS is not set # CONFIG_VXFS_FS is not set # CONFIG_NTFS_FS is not set # CONFIG_NTFS_RW is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y # CONFIG_DEVFS_FS is not set # CONFIG_DEVFS_MOUNT is not set # CONFIG_DEVFS_DEBUG is not set # CONFIG_DEVPTS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_QNX4FS_RW is not set # CONFIG_ROMFS_FS is not set CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UDF_FS is not set # CONFIG_UDF_RW is not set # CONFIG_UFS_FS is not set # CONFIG_UFS_FS_WRITE is not set
# # Network File Systems # # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_ROOT_NFS is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set # CONFIG_NFSD_TCP is not set CONFIG_SUNRPC=y CONFIG_LOCKD=y CONFIG_SMB_FS=y # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_NCP_FS is not set # CONFIG_NCPFS_PACKET_SIGNING is not set # CONFIG_NCPFS_IOCTL_LOCKING is not set # CONFIG_NCPFS_STRONG is not set # CONFIG_NCPFS_NFS_NS is not set # CONFIG_NCPFS_OS2_NS is not set # CONFIG_NCPFS_SMALLDOS is not set # CONFIG_NCPFS_NLS is not set # CONFIG_NCPFS_EXTRAS is not set # CONFIG_ZISOFS_FS is not set
# # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_SMB_NLS=y CONFIG_NLS=y
# # Native Language Support # CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set
# # Console drivers # CONFIG_VGA_CONSOLE=y CONFIG_VIDEO_SELECT=y # CONFIG_MDA_CONSOLE is not set
# # Frame-buffer support # CONFIG_FB=y CONFIG_DUMMY_CONSOLE=y # CONFIG_FB_RIVA is not set # CONFIG_FB_CLGEN is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_VESA is not set # CONFIG_FB_VGA16 is not set # CONFIG_FB_HGA is not set CONFIG_VIDEO_SELECT=y # CONFIG_FB_MATROX is not set # CONFIG_FB_ATY is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set CONFIG_FB_SIS=y CONFIG_FB_SIS_300=y # CONFIG_FB_SIS_315 is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FBCON_ADVANCED is not set CONFIG_FBCON_CFB8=y CONFIG_FBCON_CFB16=y CONFIG_FBCON_CFB32=y # CONFIG_FBCON_FONTWIDTH8_ONLY is not set # CONFIG_FBCON_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y
# # Sound # CONFIG_SOUND=y # CONFIG_SOUND_ALI5455 is not set # CONFIG_SOUND_BT878 is not set # CONFIG_SOUND_CMPCI is not set # CONFIG_SOUND_EMU10K1 is not set # CONFIG_MIDI_EMU10K1 is not set # CONFIG_SOUND_FUSION is not set # CONFIG_SOUND_CS4281 is not set # CONFIG_SOUND_ES1370 is not set # CONFIG_SOUND_ES1371 is not set # CONFIG_SOUND_ESSSOLO1 is not set # CONFIG_SOUND_MAESTRO is not set # CONFIG_SOUND_MAESTRO3 is not set # CONFIG_SOUND_FORTE is not set CONFIG_SOUND_ICH=y # CONFIG_SOUND_RME96XX is not set # CONFIG_SOUND_SONICVIBES is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_VIA82CXXX is not set # CONFIG_MIDI_VIA82CXXX is not set # CONFIG_SOUND_OSS is not set CONFIG_SOUND_TVMIXER=y
# # USB support # CONFIG_USB=y # CONFIG_USB_DEBUG is not set # CONFIG_USB_DEVICEFS is not set # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_LONG_TIMEOUT is not set # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_UHCI is not set # CONFIG_USB_UHCI_ALT is not set CONFIG_USB_OHCI=y # CONFIG_USB_AUDIO is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_BLUETOOTH is not set # CONFIG_USB_MIDI is not set CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_HP8200e is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_DC2XX is not set # CONFIG_USB_MDC800 is not set # CONFIG_USB_SCANNER is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_HPUSBSCSI is not set # CONFIG_USB_IBMCAM is not set # CONFIG_USB_OV511 is not set # CONFIG_USB_PWC is not set # CONFIG_USB_SE401 is not set # CONFIG_USB_STV680 is not set # CONFIG_USB_VICAM is not set # CONFIG_USB_DSBR is not set # CONFIG_USB_DABUSB is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_CATC is not set # CONFIG_USB_CDCETHER is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_USS720 is not set
# # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_TIGL is not set # CONFIG_USB_BRLVGER is not set # CONFIG_USB_LCD is not set
# # Bluetooth support # # CONFIG_BLUEZ is not set
# # Kernel hacking # # CONFIG_DEBUG_KERNEL is not set
# # Library routines # # CONFIG_ZLIB_INFLATE is not set # CONFIG_ZLIB_DEFLATE is not set
# # General setup # CONFIG_NET=y CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_ISA=y CONFIG_PCI_NAMES=y
You may want to change pci probing to direct only.
-Andrew
Andrew Ip wrote:
You may want to change pci probing to direct only.
Thank you I've set this and a correct root parameter on mkelfimage and now it works!!! thank you
bye as
can you write your experiences up for us? I will put them on the web page if they are helpful to others.
ron
Ronald G. Minnich wrote:
can you write your experiences up for us? I will put them on the web page if they are helpful to others.
sure, I will. I would like to be able to build my own flash image, however, and give instructions on how change the logo etc.
bye, as
-
Alessio Sangalli -
Andrew Ip -
Ronald G. Minnich