https://www.coreboot.org/Board:supermicro/h8qgi
A quad g34 with 1TB RAM would be nice to have...
I am creating a beginners guide with all the new enough to be useful and easily available brand new in box boards, I am curious if anyone uses this as I have the following questions:
- Does it work without blobs? (what happens if you don't include the video bios blob? can you still get video via seabios or linux?) - Can you de-activate the on-board iKVM? (sketchy, it seems to have an interface to one of the regular nics too) - Are there any problems with reaching the full OEM 1TB spec RAM (like where the kgpe-d16 can only go to 192gb instead of the spec'ed 256
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
On 02/06/2017 07:48 PM, Taiidan@gmx.com wrote:
https://www.coreboot.org/Board:supermicro/h8qgi
A quad g34 with 1TB RAM would be nice to have...
I am creating a beginners guide with all the new enough to be useful and easily available brand new in box boards, I am curious if anyone uses this as I have the following questions:
- Does it work without blobs? (what happens if you don't include the
video bios blob? can you still get video via seabios or linux?)
- Can you de-activate the on-board iKVM? (sketchy, it seems to have an
interface to one of the regular nics too)
- Are there any problems with reaching the full OEM 1TB spec RAM (like
where the kgpe-d16 can only go to 192gb instead of the spec'ed 256
This board uses AGESA exclusively for coreboot support. AGESA has not been audited to remove binary blobs, therefore it is unknown if this board can function correctly blob-free with the current coreboot sources.
Furthermore, there is no indication this board functions at all with coreboot in its current form. There are no public test results, and a number of mailing list posts showing problems with the SuperMicro G34 boards.
Finally, the BMC will be an issue on this board. I don't know if it can be deactivated without damaging the functionality of the board, but if it cannot then you are looking at a BMC port as well.
In a nutshell, unless someone has a few months of spare time at minimum to port this board over to the native Family 15h support code, or some cash lying around to have Raptor do it, this mainboard isn't really supported.
- -- Timothy Pearson Raptor Engineering +1 (415) 727-8645 (direct line) +1 (512) 690-0200 (switchboard) https://www.raptorengineering.com
-
Taiidan＠gmx.com -
Timothy Pearson