[commit] r5478 - in trunk/src: devices/oprom mainboard/via/epia-m northbridge/via/vt8623
Author: stepan Date: Thu Apr 22 20:15:32 2010 New Revision: 5478 URL: https://tracker.coreboot.org/trac/coreboot/changeset/5478
Log: via epia-m now works with default x86.c instead of its own copy of vgabios.c. Allows to drop quite a bunch of nasty code
Signed-off-by: Stefan Reinauer stepan@coresystems.de Acked-by: Stefan Reinauer stepan@coresystems.de
Added: trunk/src/northbridge/via/vt8623/vga.c Deleted: trunk/src/mainboard/via/epia-m/Makefile.inc trunk/src/mainboard/via/epia-m/vgabios.c trunk/src/mainboard/via/epia-m/vgachip.h Modified: trunk/src/devices/oprom/x86.c trunk/src/devices/oprom/x86_asm.S trunk/src/mainboard/via/epia-m/Kconfig trunk/src/mainboard/via/epia-m/devicetree.cb trunk/src/mainboard/via/epia-m/mainboard.c trunk/src/mainboard/via/epia-m/romstage.c trunk/src/northbridge/via/vt8623/Makefile.inc trunk/src/northbridge/via/vt8623/northbridge.c trunk/src/northbridge/via/vt8623/northbridge.h
Modified: trunk/src/devices/oprom/x86.c ============================================================================== --- trunk/src/devices/oprom/x86.c Thu Apr 22 15:18:09 2010 (r5477) +++ trunk/src/devices/oprom/x86.c Thu Apr 22 20:15:32 2010 (r5478) @@ -318,7 +318,7 @@
/* Pass errors back to our caller via the CARRY flag */ if (ret) { - printk(BIOS_DEBUG,"error!\n"); + printk(BIOS_DEBUG,"int%02x call returned error.\n", intnumber); flags |= 1; // error: set carry }else{ flags &= ~1; // no error: clear carry
Modified: trunk/src/devices/oprom/x86_asm.S ============================================================================== --- trunk/src/devices/oprom/x86_asm.S Thu Apr 22 15:18:09 2010 (r5477) +++ trunk/src/devices/oprom/x86_asm.S Thu Apr 22 20:15:32 2010 (r5478) @@ -257,8 +257,6 @@ .globl __run_interrupt __run_interrupt = RELOCATED(.)
- /* paranoia -- does ecx get saved? not sure. This is - * the easiest safe thing to do. */ pushal /* save the stack */ mov %esp, __stack
Modified: trunk/src/mainboard/via/epia-m/Kconfig ============================================================================== --- trunk/src/mainboard/via/epia-m/Kconfig Thu Apr 22 15:18:09 2010 (r5477) +++ trunk/src/mainboard/via/epia-m/Kconfig Thu Apr 22 20:15:32 2010 (r5478) @@ -22,24 +22,8 @@ default "EPIA-M" depends on BOARD_VIA_EPIA_M
-config RAMBASE - hex - default 0x4000 - depends on BOARD_VIA_EPIA_M - config IRQ_SLOT_COUNT int default 5 depends on BOARD_VIA_EPIA_M
-# this is done by this board's vgabios.c already -config VGA_ROM_RUN - bool - default n - depends on BOARD_VIA_EPIA_M - -config PCI_ROM_RUN - bool - default n - depends on BOARD_VIA_EPIA_M -
Modified: trunk/src/mainboard/via/epia-m/devicetree.cb ============================================================================== --- trunk/src/mainboard/via/epia-m/devicetree.cb Thu Apr 22 15:18:09 2010 (r5477) +++ trunk/src/mainboard/via/epia-m/devicetree.cb Thu Apr 22 20:15:32 2010 (r5478) @@ -7,6 +7,10 @@ end
device pci_domain 0 on + + device pci 0.0 on end + device pci 1.0 on end + chip southbridge/via/vt8235
device pci 10.0 on end # USB 1.1
Modified: trunk/src/mainboard/via/epia-m/mainboard.c ============================================================================== --- trunk/src/mainboard/via/epia-m/mainboard.c Thu Apr 22 15:18:09 2010 (r5477) +++ trunk/src/mainboard/via/epia-m/mainboard.c Thu Apr 22 20:15:32 2010 (r5478) @@ -1,40 +1,5 @@ -#include <console/console.h> #include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> -#include <arch/io.h> #include "chip.h" -#include "vgachip.h" - -static void vga_fixup(void) { - // we do this right here because: - // - all the hardware is working, and some VGA bioses seem to need - // that - // - we need page 0 below for coreboot tables. - - printk(BIOS_DEBUG, "INSTALL REAL-MODE IDT\n"); - setup_realmode_idt(); - printk(BIOS_DEBUG, "DO THE VGA BIOS\n"); - do_vgabios(); - post_code(0x93); - vga_enable_console(); -} - -void write_protect_vgabios(void) -{ - device_t dev; - - printk(BIOS_INFO, "write_protect_vgabios\n"); - /* there are two possible devices. Just do both. */ - dev = dev_find_device(PCI_VENDOR_ID_VIA, 0x3122, 0); - if(dev) - pci_write_config8(dev, 0x61, 0xaa); - - dev = dev_find_device(PCI_VENDOR_ID_VIA, 0x3123, 0); - if(dev) - pci_write_config8(dev, 0x61, 0xaa); -}
struct chip_operations mainboard_ops = { CHIP_NAME("VIA EPIA-M Mainboard")
Modified: trunk/src/mainboard/via/epia-m/romstage.c ============================================================================== --- trunk/src/mainboard/via/epia-m/romstage.c Thu Apr 22 15:18:09 2010 (r5477) +++ trunk/src/mainboard/via/epia-m/romstage.c Thu Apr 22 20:15:32 2010 (r5478) @@ -30,7 +30,7 @@ { device_t dev;
- dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, + dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235), 0);
if (dev == PCI_DEV_INVALID) { @@ -82,7 +82,7 @@ * Disable the firewire stuff, which apparently steps on IO 0+ on * reset. Doh! */ - dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, + dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_6305), 0); if (dev != PCI_DEV_INVALID) { pci_write_config8(dev, 0x15, 0x1c); @@ -94,14 +94,12 @@
enable_smbus();
- print_spew("In romstage.c:main()\n"); - /* Halt if there was a built in self test failure */ report_bist_failure(bist);
// init_timer();
- outb(5, 0x80); + post_code(0x05);
print_debug(" Enabling mainboard devices\n"); enable_mainboard_devices(); @@ -113,18 +111,11 @@ /* Check all of memory */ #if 0 - ram_check(0x00000000, msr.lo); -#endif -#if 0 static const struct { unsigned long lo, hi; } check_addrs[] = { /* Check 16MB of memory @ 0*/ { 0x00000000, 0x01000000 }, -#if TOTAL_CPUS > 1 - /* Check 16MB of memory @ 2GB */ - { 0x80000000, 0x81000000 }, -#endif }; int i; for(i = 0; i < ARRAY_SIZE(check_addrs); i++) {
Modified: trunk/src/northbridge/via/vt8623/Makefile.inc ============================================================================== --- trunk/src/northbridge/via/vt8623/Makefile.inc Thu Apr 22 15:18:09 2010 (r5477) +++ trunk/src/northbridge/via/vt8623/Makefile.inc Thu Apr 22 20:15:32 2010 (r5478) @@ -19,4 +19,5 @@ ##
driver-y += northbridge.o +driver-y += vga.o
Modified: trunk/src/northbridge/via/vt8623/northbridge.c ============================================================================== --- trunk/src/northbridge/via/vt8623/northbridge.c Thu Apr 22 15:18:09 2010 (r5477) +++ trunk/src/northbridge/via/vt8623/northbridge.c Thu Apr 22 20:15:32 2010 (r5478) @@ -105,82 +105,6 @@ .device = PCI_DEVICE_ID_VIA_8633_1, };
-static void vga_init(device_t dev) -{ - //unsigned long fb; - //msr_t clocks1,clocks2,instructions,setup; - - printk(BIOS_DEBUG, "VGA random fixup ...\n"); - pci_write_config8(dev, 0x04, 0x07); - pci_write_config8(dev, 0x0d, 0x20); - pci_write_config32(dev,0x10,0xd8000008); - pci_write_config32(dev,0x14,0xdc000000); - - // set up performnce counters for debugging vga init sequence - //setup.lo = 0x1c0; // count instructions - //wrmsr(0x187,setup); - //instructions.hi = 0; - //instructions.lo = 0; - //wrmsr(0xc2,instructions); - //clocks1 = rdmsr(0x10); - - -#if 0 - /* code to make vga init go through the emulator - as of yet this does not workfor the epia-m */ - pci_dev_init(dev); - - call_bios_interrupt(0x10,0x4f1f,0x8003,1,0); - - //clocks2 = rdmsr(0x10); - //instructions = rdmsr(0xc2); - - printk(BIOS_DEBUG, "Clocks 1 = %08x:%08x\n",clocks1.hi,clocks1.lo); - printk(BIOS_DEBUG, "Clocks 2 = %08x:%08x\n",clocks2.hi,clocks2.lo); - printk(BIOS_DEBUG, "Instructions = %08x:%08x\n",instructions.hi,instructions.lo); - -#else - - /* code to make vga init run in real mode - does work but against the current coreboot philosophy */ - printk(BIOS_DEBUG, "INSTALL REAL-MODE IDT\n"); - setup_realmode_idt(); - printk(BIOS_DEBUG, "DO THE VGA BIOS\n"); - do_vgabios(); - - //clocks2 = rdmsr(0x10); - //instructions = rdmsr(0xc2); - - //printk(BIOS_DEBUG, "Clocks 1 = %08x:%08x\n",clocks1.hi,clocks1.lo); - //printk(BIOS_DEBUG, "Clocks 2 = %08x:%08x\n",clocks2.hi,clocks2.lo); - //printk(BIOS_DEBUG, "Instructions = %08x:%08x\n",instructions.hi,instructions.lo); - - vga_enable_console(); - -#endif - - pci_write_config32(dev,0x30,0); - - /* Set the vga mtrrs - disable for the moment as the add_var_mtrr function has vapourised */ -#if 0 - add_var_mtrr( 0xd0000000 >> 10, 0x08000000>>10, MTRR_TYPE_WRCOMB); - fb = pci_read_config32(dev,0x10); // get the fb address - add_var_mtrr( fb>>10, 8192, MTRR_TYPE_WRCOMB); -#endif -} - -static struct device_operations vga_operations = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = vga_init, - .ops_pci = 0, -}; - -static const struct pci_driver vga_driver __pci_driver = { - .ops = &vga_operations, - .vendor = PCI_VENDOR_ID_VIA, - .device = 0x3122, -}; - static void ram_resource(device_t dev, unsigned long index, unsigned long basek, unsigned long sizek) {
Modified: trunk/src/northbridge/via/vt8623/northbridge.h ============================================================================== --- trunk/src/northbridge/via/vt8623/northbridge.h Thu Apr 22 15:18:09 2010 (r5477) +++ trunk/src/northbridge/via/vt8623/northbridge.h Thu Apr 22 20:15:32 2010 (r5478) @@ -2,11 +2,7 @@ #define NORTHBRIDGE_VIA_VT8623_H
unsigned int vt8623_scan_root_bus(device_t root, unsigned int max); - -void vga_enable_console(void); -void do_vgabios(void); -void setup_realmode_idt(void); +extern void (*vga_enable_console)(void) __attribute__((regparm(0))); void write_protect_vgabios(void);
- #endif /* NORTHBRIDGE_VIA_VT8623_H */
Added: trunk/src/northbridge/via/vt8623/vga.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/northbridge/via/vt8623/vga.c Thu Apr 22 20:15:32 2010 (r5478) @@ -0,0 +1,158 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/io.h> +#include <stdint.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <stdlib.h> +#include <string.h> +#include <bitops.h> +#include <cpu/cpu.h> +#include <cpu/x86/mtrr.h> +#include <cpu/x86/msr.h> +#include <arch/interrupt.h> +#include "chip.h" +#include "northbridge.h" + +static int via_vt8623_int15_handler(struct eregs *regs) +{ + int res=-1; + printk(BIOS_DEBUG, "via_vt8623_int15_handler\n"); + switch(regs->eax & 0xffff) { + case 0x5f19: + break; + case 0x5f18: + regs->eax=0x5f; + regs->ebx=0x545; // MCLK = 133, 32M frame buffer, 256 M main memory + regs->ecx=0x060; + res=0; + break; + case 0x5f00: + regs->eax = 0x8600; + break; + case 0x5f01: + regs->eax = 0x5f; + regs->ecx = (regs->ecx & 0xffffff00 ) | 2; // panel type = 2 = 1024 * 768 + res = 0; + break; + case 0x5f02: + regs->eax=0x5f; + regs->ebx= (regs->ebx & 0xffff0000) | 2; + regs->ecx= (regs->ecx & 0xffff0000) | 0x401; // PAL + crt only + regs->edx= (regs->edx & 0xffff0000) | 0; // TV Layout - default + res=0; + break; + case 0x5f0f: + regs->eax=0x860f; + break; + default: + printk(BIOS_DEBUG, "Unknown INT15 function %04x!\n", + regs->eax & 0xffff); + break; + } + return res; +} + +void write_protect_vgabios(void) +{ + device_t dev; + + printk(BIOS_DEBUG, "write_protect_vgabios\n"); + + dev = dev_find_device(PCI_VENDOR_ID_VIA, 0x3122, 0); + if (dev) + pci_write_config8(dev, 0x61, 0xaa); + + dev = dev_find_device(PCI_VENDOR_ID_VIA, 0x3123, 0); + if (dev) + pci_write_config8(dev, 0x61, 0xaa); +} + +static void vga_random_fixup(device_t dev) +{ + printk(BIOS_DEBUG, "VGA random fixup ...\n"); + pci_write_config8(dev, 0x04, 0x07); + pci_write_config8(dev, 0x0d, 0x20); + pci_write_config32(dev,0x10,0xd8000008); + pci_write_config32(dev,0x14,0xdc000000); +} + +static void vga_init(device_t dev) +{ + vga_random_fixup(dev); + + mainboard_interrupt_handlers(0x15, &via_vt8623_int15_handler); + +#ifdef MEASURE_VGA_INIT_TIME + msr_t clocks1, clocks2, instructions, setup; + + // set up performnce counters for debugging vga init sequence + setup.lo = 0x1c0; // count instructions + wrmsr(0x187,setup); + instructions.hi = 0; + instructions.lo = 0; + wrmsr(0xc2,instructions); + clocks1 = rdmsr(0x10); +#endif + printk(BIOS_DEBUG, "Initializing VGA...\n"); + + pci_dev_init(dev); + + printk(BIOS_DEBUG, "Enable VGA console\n"); + // this is how it should look: + // call_bios_interrupt(0x10,0x4f1f,0x8003,1,0); + // this is how it looks: + vga_enable_console(); + +#ifdef MEASURE_VGA_INIT_TIME + clocks2 = rdmsr(0x10); + instructions = rdmsr(0xc2); + + printk(BIOS_DEBUG, "Clocks 1 = %08x:%08x\n",clocks1.hi,clocks1.lo); + printk(BIOS_DEBUG, "Clocks 2 = %08x:%08x\n",clocks2.hi,clocks2.lo); + printk(BIOS_DEBUG, "Instructions = %08x:%08x\n",instructions.hi,instructions.lo); +#endif + + pci_write_config32(dev, 0x30, 0); + +#if 0 + /* Set the vga mtrrs - disable for the moment as the add_var_mtrr function has vapourised */ + unsigned long fb; + add_var_mtrr( 0xd0000000 >> 10, 0x08000000>>10, MTRR_TYPE_WRCOMB); + fb = pci_read_config32(dev,0x10); // get the fb address + add_var_mtrr( fb>>10, 8192, MTRR_TYPE_WRCOMB); +#endif +} + +static struct device_operations vga_operations = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = vga_init, + .ops_pci = 0, +}; + +static const struct pci_driver vga_driver __pci_driver = { + .ops = &vga_operations, + .vendor = PCI_VENDOR_ID_VIA, + .device = 0x3122, +};
-
repository service