r1034 - coreboot-v3/superio/winbond/w83627hf

Author: uwe
Date: 2008-11-16 14:45:53 +0100 (Sun, 16 Nov 2008)
New Revision: 1034

Modified:
   coreboot-v3/superio/winbond/w83627hf/dts
Log:
Fix some incorrect entries in superio/winbond/w83627hf/dts.

The hardware monitor defaults as per datasheet are 0x0000 / 0, but on
hardware that uses this functionality it seems to be 0x290 / 5 often,
thus use those values in the dts.

Signed-off-by: Uwe Hermann 
Acked-by: Myles Watson

Modified: coreboot-v3/superio/winbond/w83627hf/dts
===================================================================
--- coreboot-v3/superio/winbond/w83627hf/dts	2008-11-16 13:41:15 UTC (rev 1033)
+++ coreboot-v3/superio/winbond/w83627hf/dts	2008-11-16 13:45:53 UTC (rev 1034)
@@ -20,18 +20,20 @@

{
    device_operations = "w83627hf_ops";
+
    /* To override any of these, put the over-ride in mainboard dts. */

/* Floppy */
    floppyenable = "0";
    floppyio = "0x3f0";
-	floppyirq = "0x60";
-	floppydrq = "0x02";
+	floppyirq = "6";
+	floppydrq = "2";

/* Parallel port */
    ppenable = "0";
    ppio = "0x378";
    ppirq = "7";
+	ppdrq = "4";

/* COM1 */
    com1enable = "0";
@@ -43,23 +45,23 @@
    com2io = "0x2f8";
    com2irq = "3";

-	/* Keyboard */
+	/* PS/2 keyboard + PS/2 mouse */
    kbenable = "0";
    kbio = "0x60";
-	kbio2 = "0x62";
+	kbio2 = "0x64";
    kbirq = "1";
    kbirq2 = "12";

/* Consumer IR */
    cirenable = "0";

-	/* Game port */
+	/* Game port, MIDI port, GPIO1 */
    gameenable = "0";
-	gameio = "0x220";
-	gameio2 = "0x400";
+	gameio = "0x201";
+	gameio2 = "0x330";
    gameirq = "9";

-	/* GPIO2 */
+	/* GPIO2, watchdog timer */
    gpio2enable = "0";

/* GPIO3 */