答复: ATI rage xl.init

[YhLu]

So I need to produce another patch except 3, 4 & 5?

-----邮件原件-----
发件人: Li-Ta Lo [mailto:[e-mail]] 
发送时间: 2004年4月23日 11:00
收件人: YhLu
抄送: ron minnich; Stefan Reinauer; LinuxBIOS
主题: Re: ATI rage xl.init

On Fri, 2004-04-23 at 11:56, YhLu wrote:
> You only commit 4 & 5 ?

I haven't commit anything yet. I am busy working on
the ibm/e325 HT enumeration problem. I will look at
the patch next week.

Ollie
> -----邮件原件-----
> 发件人: Li-Ta Lo [mailto:[e-mail]] 
> 发送时间: 2004年4月21日 14:47
> 收件人: YhLu
> 抄送: ron minnich; Stefan Reinauer; LinuxBIOS
> 主题: Re: ATI rage xl.init
>
> On Tue, 2004-04-20 at 19:38, YhLu wrote:
> > Ron,
> >
> > Please commit ati rage xl support.
> > ati rage xl support
> > add btext_console to use rage xl fb.
> > enable pnp init calling
> > superio Winbond: real enable/disable device.
> > superio Winbond: enable HW
> > Tyan S2850 support update
> > Tyan S2875 support added.
> > Move some PCI master enable driver to /driver dir.
> >
> > Stefan,
> >
> > Please test the filo too, I add the btext_console into it.
> > On vocation? Why using [e-mail] ?
>
> there are some conflicts between your tree and the current
> CVS. Could you do cvs update and send me the patch again ?
>
> Ollie

[Hendricks David W.]

The only thing that didn't patch cleanly on my setup was a config file for 
a Tyan board. Was there anything else that didn't apply cleanly to a CVS 
tree, Ollie? It might be nice to get that ATi and btext stuff in there 
quickly since there are likely others who are very, very interested in 
this patch. Though I know Ron wanted to review the superIO and PNP 
changes a little more after finishing his paperwork :-/

On Fri, 23 Apr 2004, YhLu wrote:
> So I need to produce another patch except 3, 4 & 5?
>
> -----ÓʼþÔ­¼þ-----
> ·¢¼þÈË: Li-Ta Lo [mailto:[e-mail]] 
> ·¢ËÍʱ¼ä: 2004Äê4ÔÂ23ÈÕ 11:00
> ÊÕ¼þÈË: YhLu
> ³­ËÍ: ron minnich; Stefan Reinauer; LinuxBIOS
> Ö÷Ìâ: Re: ATI rage xl.init
>
> On Fri, 2004-04-23 at 11:56, YhLu wrote:
> > You only commit 4 & 5 ?
>
> I haven't commit anything yet. I am busy working on
> the ibm/e325 HT enumeration problem. I will look at
> the patch next week.
>
> Ollie
> > -----ÓʼþÔ­¼þ-----
> > ·¢¼þÈË: Li-Ta Lo [mailto:[e-mail]] 
> > ·¢ËÍʱ¼ä: 2004Äê4ÔÂ21ÈÕ 14:47
> > ÊÕ¼þÈË: YhLu
> > ³­ËÍ: ron minnich; Stefan Reinauer; LinuxBIOS
> > Ö÷Ìâ: Re: ATI rage xl.init
> >
> > On Tue, 2004-04-20 at 19:38, YhLu wrote:
> > > Ron,
> > >
> > > Please commit ati rage xl support.
> > > ati rage xl support
> > > add btext_console to use rage xl fb.
> > > enable pnp init calling
> > > superio Winbond: real enable/disable device.
> > > superio Winbond: enable HW
> > > Tyan S2850 support update
> > > Tyan S2875 support added.
> > > Move some PCI master enable driver to /driver dir.
> > >
> > > Stefan,
> > >
> > > Please test the filo too, I add the btext_console into it.
> > > On vocation? Why using [e-mail] ?
> >
> > there are some conflicts between your tree and the current
> > CVS. Could you do cvs update and send me the patch again ?
> >
> > Ollie
>
> Linuxbios mailing list
> [e-mail]
> http://www.clustermatic.org/mailman/listinfo/linuxbios

[ron minnich]

On Fri, 23 Apr 2004, Hendricks David W. wrote:
> The only thing that didn't patch cleanly on my setup was a config file for 
> a Tyan board. Was there anything else that didn't apply cleanly to a CVS 
> tree, Ollie? It might be nice to get that ATi and btext stuff in there 
> quickly since there are likely others who are very, very interested in 
> this patch. Though I know Ron wanted to review the superIO and PNP 
> changes a little more after finishing his paperwork :-/

Ollie and David I'll let you go for it.

I was most worried about the change to k8 north code. Please check that.

It seems like this code is really needed.

ron