Hello Naresh,
You mean connecting device to USB3 cause wake immediately after S3 entry?
No, if I use only USB mouse and keyboard connected to USB2 ports the computer will suspend correctly (if I click or execute the S3 command) and will not wake up (I did 60hour test) unless I push the power button or press any key on the USB keyboard.
But, If I populate any USB3 port (XHCI) with any USB device (no matter if is USB2 or 3 compliant) the system will not go to suspension, just start again and resume the OS where it was.
Connecting any USB device in a USB3 port is not waking up the system once the system is suspended.
Can you provide kernel logs
Yes, I will do it today.
What device are you using?
I am using Nico Huber's bSL6 COMe module from coreboot's Gerrit on a Kabylake bKL6 (with the same PCB layout) with of course KabyLake microcode and configuration in Kconfig.
https://review.coreboot.org/c/coreboot/+/29480
I just added the bitmap for wake enable and other small things in devicetree.
Does behaviour changes if different device on USB3 is used ?
No, anything connected on USB3 port will prevent suspension (USB2/3 thumb drive or keyboard/mouse)...
Also can you provided MMIO dump of PORTSC before & after S3 entry.
I am working on it.
Thank you, Jose Trujillo.
-
Jose Trujillo