[LinuxBIOS] r3029 - trunk/util/flashrom

Author: hailfinger
Date: 2007-12-31 02:18:26 +0100 (Mon, 31 Dec 2007)
New Revision: 3029

Modified:
   trunk/util/flashrom/flash.h
   trunk/util/flashrom/flashchips.c
   trunk/util/flashrom/m29f400bt.c
Log:
This fixes a few vendor IDs to conform with JEDEC publication 106W
(JEP106W), adds some device IDs and provides information about
non-conforming IDs.
The EON change is left to the patch adding EON chips.

This patch should have no effect on code generation.

Signed-off-by: Carl-Daniel Hailfinger 
Acked-by: Corey Osgood

Modified: trunk/util/flashrom/flash.h
===================================================================
--- trunk/util/flashrom/flash.h	2007-12-30 11:59:10 UTC (rev 3028)
+++ trunk/util/flashrom/flash.h	2007-12-31 01:18:26 UTC (rev 3029)
@@ -59,16 +59,16 @@
  * All SPI parts have 16-bit device IDs.
  */

-#define ALLIANCE_ID		0x52	/* Alliance */
+#define ALLIANCE_ID		0x52	/* Alliance Semiconductor */

#define AMD_ID			0x01	/* AMD */
 #define AM_29F040B		0xA4
 #define AM_29LV040B		0x4F
 #define AM_29F016D		0xAD

-#define AMIC_ID			0x37	/* AMIC */
+#define AMIC_ID			0x7F37	/* AMIC */

-#define ASD_ID			0x25	/* ASD */
+#define ASD_ID			0x25	/* ASD, not listed in JEP106W */
 #define ASD_AE49F2008		0x52

#define ATMEL_ID		0x1F	/* Atmel */
@@ -79,14 +79,14 @@

#define CATALYST_ID		0x31	/* Catalyst */

-#define EMST_ID			0x8C	/* EMST / EFST */
+#define EMST_ID			0x8C	/* EMST / EFST Elite Flash Storage*/
 #define EMST_F49B002UA		0x00

/*
  * EN25 chips are SPI, first byte of device ID is memory type,
  * second byte of device ID is log(bitsize)-9.
  */
-#define EON_ID			0x1C	/* EON */
+#define EON_ID			0x1C	/* EON Silicon Devices */
 #define EN_25B05		0x2010	/* 2^19 kbit or 2^16 kByte */
 #define EN_25B10		0x2011
 #define EN_25B20		0x2012
@@ -96,17 +96,24 @@
 #define EN_25B32		0x2016

#define FUJITSU_ID		0x04	/* Fujitsu */
-#define MBM29F400TC		0x23
+/* MBM29F400TC_STRANGE has a value not mentioned in the data sheet and we
+ * try to read it from a location not mentioned in the data sheet.
+ */
+#define MBM29F400TC_STRANGE	0x23
+#define MBM29F400BC		0x7B
+#define MBM29F400TC		0x77

#define HYUNDAI_ID		0xAD	/* Hyundai */

-#define IMT_ID			0x7F	/* IMT */
+#define IMT_ID			0x7F1F	/* Integrated Memory Technologies */
+#define IM_29F004B		0xAE
+#define IM_29F004T		0xAF

#define INTEL_ID		0x89	/* Intel */

-#define ISSI_ID			0xD5	/* ISSI */
+#define ISSI_ID			0xD5	/* ISSI Integrated Silicon Solutions */

-#define MSYSTEMS_ID		0x156F	/* M-Systems */
+#define MSYSTEMS_ID		0x156F	/* M-Systems, not listed in JEP106W */
 #define MSYSTEMS_MD2200		0xDB
 #define MSYSTEMS_MD2800		0x30	/* hmm -- both 0x30 */
 #define MSYSTEMS_MD2802		0x30	/* hmm -- both 0x30 */
@@ -128,6 +135,9 @@
 #define MX_25L3235D		0x2416
 #define MX_29F002		0xB0

+/* Programmable Micro Corp is listed in JEP106W in bank 2, so it should have
+ * a 0x7F continuation code prefix.
+ */
 #define PMC_ID			0x9D	/* PMC */
 #define PMC_49FL002		0x6D
 #define PMC_49FL004		0x6E
@@ -171,7 +181,7 @@
  * ST25P chips are SPI, first byte of device ID is memory type, second
  * byte of device ID is related to log(bitsize) at least for some chips.
  */
-#define ST_ID			0x20	/* ST */
+#define ST_ID			0x20	/* ST / SGS/Thomson */
 #define ST_M25P05A		0x2010
 #define ST_M25P10A		0x2011
 #define ST_M25P20		0x2012

Modified: trunk/util/flashrom/flashchips.c
===================================================================
--- trunk/util/flashrom/flashchips.c	2007-12-30 11:59:10 UTC (rev 3028)
+++ trunk/util/flashrom/flashchips.c	2007-12-31 01:18:26 UTC (rev 3029)
@@ -42,7 +42,7 @@
     probe_jedec,	erase_chip_jedec, write_jedec},
    {"At49F002(N)T",ATMEL_ID,	AT_49F002NT,	256, 256,
     probe_jedec,	erase_chip_jedec, write_jedec},
-	{"MBM29F400TC",	FUJITSU_ID,	MBM29F400TC,	512, 64 * 1024,
+	{"MBM29F400TC",	FUJITSU_ID,	MBM29F400TC_STRANGE,	512, 64 * 1024,
     probe_m29f400bt, erase_m29f400bt, write_linuxbios_m29f400bt},
    {"MX29F002",	MX_ID,		MX_29F002,	256, 64 * 1024,
     probe_29f002,	erase_29f002, 	write_29f002},

Modified: trunk/util/flashrom/m29f400bt.c
===================================================================
--- trunk/util/flashrom/m29f400bt.c	2007-12-30 11:59:10 UTC (rev 3028)
+++ trunk/util/flashrom/m29f400bt.c	2007-12-31 01:18:26 UTC (rev 3029)
@@ -64,6 +64,9 @@
    myusec_delay(10);

id1 = *(volatile uint8_t *)bios;
+	/* The data sheet says id2 is at (bios + 0x01) and id2 listed in
+	 * flash.h does not match. It should be possible to use JEDEC probe.
+	 */
    id2 = *(volatile uint8_t *)(bios + 0x02);

*(volatile uint8_t *)(bios + 0xAAA) = 0xAA;