I have epia board. I had followed the HOWTO/EPIA Documentation. But The debug messages are like this below. What's wrong? I use a ROM Emulator. And I use mkelfImage from freebios/util/mkelfImage/. Please, Help me!! ===================================================== LinuxBIOS-1.0.0 Tue Mar 18 21:45:13 KST 2003 starting... Copying LinuxBIOS to ram. Jumping to LinuxBIOS. LinuxBIOS-1.0.0 Tue Mar 18 21:45:13 KST 2003 booting... Finding PCI configuration type. PCI: Using configuration type 1 Scanning PCI bus...PCI: pci_scan_bus for bus 0 PCI: 00:00.0 [1106/0601] PCI: 00:01.0 [1106/8601] PCI: 00:11.0 [1106/8231] PCI: 00:11.1 [1106/0571] PCI: 00:11.2 [1106/3038] PCI: 00:11.3 [1106/3038] PCI: 00:11.4 [1106/8235] PCI: 00:11.5 [1106/3058] PCI: 00:11.6 [1106/3068] PCI: 00:12.0 [1106/3065] PCI: pci_scan_bus for bus 1 PCI: pci_scan_bus returning with max=01 PCI: pci_scan_bus returning with max=01 done Allocating PCI resources... PCI: 00:00.0 register 10(00000008), read-only ignoring it PCI: 00:00.0 register 10(00000008), read-only ignoring it PCI: 00:00.0 register 10(00000008), read-only ignoring it PCI: 00:00.0 register 10(00000008), read-only ignoring it ASSIGN RESOURCES, bus 0 PCI: 00:01.0 1c <- [0x00001000 - 0x00000fff] bus 1 io PCI: 00:01.0 24 <- [0xfeb00000 - 0xfeafffff] bus 1 prefmem PCI: 00:01.0 20 <- [0xfeb00000 - 0xfeafffff] bus 1 mem PCI: 00:11.1 20 <- [0x00001c40 - 0x00001c4f] io PCI: 00:11.2 20 <- [0x00001c00 - 0x00001c1f] io PCI: 00:11.3 20 <- [0x00001c20 - 0x00001c3f] io PCI: 00:11.5 10 <- [0x00001000 - 0x000010ff] io PCI: 00:11.5 14 <- [0x00001c50 - 0x00001c53] io PCI: 00:11.5 18 <- [0x00001c60 - 0x00001c63] io PCI: 00:11.6 10 <- [0x00001400 - 0x000014ff] io PCI: 00:12.0 10 <- [0x00001800 - 0x000018ff] io PCI: 00:12.0 14 <- [0xfeb00000 - 0xfeb000ff] mem ASSIGNED RESOURCES, bus 0 done. Enabling PCI resourcess...PCI: 00:00.0 cmd <- 06 PCI: 00:01.0 cmd <- 07 PCI: 00:11.0 cmd <- 87 PCI: 00:11.1 cmd <- 81 PCI: 00:11.2 cmd <- 01 PCI: 00:11.3 cmd <- 01 PCI: 00:11.4 cmd <- 00 PCI: 00:11.5 cmd <- 01 PCI: 00:11.6 cmd <- 01 PCI: 00:12.0 cmd <- 83 done. Initializing PCI devices... PCI devices initialized sizeram: returning 0x1fc00 KB sizeram: NOT returning 0x1fc00 KB sizeram: there are still some SPD problems ... sizeram: SO we return only 0x10000 KB totalram: 64M Initializing CPU #0 Enabling cache... Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) type: WB DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 64MB, type WB DONE variable MTRRs Clear out the extra MTRR's call intel_enable_fixed_mtrr() call intel_enable_var_mtrr() Leave setup_mtrrs done. Max cpuid index : 1 Vendor ID : CentaurHauls Processor Type : 0x00 Processor Family : 0x06 Processor Model : 0x07 Processor Mask : 0x00 Processor Stepping : 0x08 Feature flags : 0x00803035
MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled Disabling local apic...done. CPU #0 Initialized Mainboard fixup IDE enable in reg. 50 is 0x7 set IDE reg. 50 to 0x7 IRQs in reg. 4c are 0x4 setting reg. 4c to 0x4 enables in reg 0x40 0x8 enables in reg 0x40 read back as 0xb enables in reg 0x9 0x8f enables in reg 0x9 read back as 0x8a command in reg 0x4 0x81 command in reg 0x4 reads back as 0x7 Ethernet fixup Configuring VIA LAN RTC Init Invalid CMOS LB checksum Final mainboard fixup Southbridge fixup setting southbridge Assigning IRQ 12 to 0:11.2 Readback = 12 Assigning IRQ 12 to 0:11.3 Readback = 12 Assigning IRQ 10 to 0:11.5 Readback = 10 Assigning IRQ 10 to 0:11.6 Readback = 10 setting ethernet Assigning IRQ 11 to 0:12.0 Readback = 11 setting pci slot Checking IRQ routing tables... /home/newbell/LinuxBios/freebios/src/arch/i386/lib/pirq_routing.c: 24:check_p irq_routing_table() - irq_routing_table located at: 0x0000a440 done. Copying IRQ routing tables to 0xf0000...done. Verifing priq routing tables copy at 0xf0000...failed Wrote linuxbios table at: 00000500 - 00000664 checksum 48cc Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.2 203:init_bytes() - zkernel_start:0xfff00000 zkernel_mask:0x0000ffff Searching for 16 byte tags 64:rom_read_bytes() - overflowed source buffer. max_block = 15 init_bytes found 0 tags Found ELF candiate at offset 0 New segment addr 0x94000 size 0x74e8 offset 0x60 filesize 0x396c (cleaned up) New segment addr 0x94000 size 0x74e8 offset 0x60 filesize 0x396c Loading Segment: addr: 0x0000000000094000 memsz: 0x00000000000074e8 filesz: 0x00 0000000000396c Clearing Segment: addr: 0x000000000009796c memsz: 0x0000000000003b7c Jumping to boot code at 0x94000 ROM segment 0x4041 length 0x0006 reloc 0x9400 Etherboot 5.0.8 (GPL) Tagged ELF for [VIA 86C100] Boot from (N)etwork or from (L)ocal? clocks_per_tick = 420319 N Probing...[VIA 86C100]Found VIA 6102 ROM address 0x0000 rhine.c v1.0.0 2000-01-07 IO address 1800 Ethernet Address: 00:00:F0:91:58:39 Analyzing Media type,this will take several seconds........OK Linespeed=10Mbs Fullduplex The PCI BIOS has not enabled this device! Updating PCI command 0003->0007. pci_bus 00 pci_device_fn 90 Searching for server (DHCP)... .Me: 165.213.172.236, Server: 165.213.172.155, Gateway 165.213.172.1 Loading 165.213.172.155:/tftpboot/vmlinuz.xterm ...(ELF)... ................... ....................................................................... ....... ....................................................................... ....... ....................................................................... ....... ....................................................................... ....... ....................................................................... ....... ....................................................................... ....... ....................................................................... ....... ....................................................................don e rhine disable Unknown bootloader class! type=0x000101C0 data=0x000989CE Firmware type: LinuxBIOS
-
NEWBELL7＠magicn.com