On the Intel DG33TL motherboard, the Super I/O is an WPCD376I. Output:
# ./superiotool -d Found Winbond WPCD376I (sid=0xf1, srid=0x91) at 0x2e Register dump: idx 10 12 13 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f val 00 00 00 f1 91 00 00 c0 01 00 91 00 91 00 00 00 00 00 00 def 00 00 00 f1 11 00 00 00 RR 00 MM RR 01 2e RR RR RR RR RR LDN 0x00 (Floppy) idx 30 60 61 70 71 74 75 f0 f1 f8 val 00 00 00 06 03 02 04 24 00 24 def 00 03 f2 06 03 02 04 24 00 24 LDN 0x01 (Parallel port) idx 30 60 61 70 71 74 75 f0 f8 val 00 00 00 07 02 04 04 92 04 def 00 02 78 07 02 04 04 f2 07 LDN 0x02 (IR) idx 30 60 61 70 71 74 75 f0 val 00 00 00 03 03 04 04 02 def 00 02 f8 03 03 04 04 02 LDN 0x03 (COM1) idx 30 60 61 70 71 74 75 f0 val 01 03 f8 04 03 04 04 02 def 00 03 f8 04 03 04 04 02 LDN 0x04 (System wake-up control (SWC)) idx 30 50 60 61 62 63 70 71 74 75 val 01 00 06 d0 06 c0 00 03 04 04 def 00 00 00 00 00 00 00 03 04 04 LDN 0x05 (Mouse) idx 30 70 71 74 75 val 01 0c 02 04 04 def 00 0c 02 04 04 LDN 0x06 (Keyboard) idx 30 60 61 62 63 70 71 74 75 f0 val 01 00 60 00 64 01 02 04 04 40 def 00 00 60 00 64 01 02 04 04 40 LDN 0x07 (GPIO) idx 30 50 60 61 70 71 74 75 f0 f1 f2 f3 f8 val 01 00 06 80 00 03 04 04 07 00 00 00 00 def 00 00 00 00 00 03 04 04 00 MM 00 MM 01
Signed-off-by: Sean Young sean@mess.org
Index: nsc.c =================================================================== --- nsc.c (revision 4887) +++ nsc.c (working copy) @@ -400,7 +400,7 @@ {EOT}}}, {0xf0, "PC87372", { {EOT}}}, - {0xf1, "PC8374L", { + {0x0f1, "PC8374L", { {NOLDN, NULL, {0x10,0x12,0x13,0x20,0x21,0x22,0x23,0x24,0x25,0x26, 0x27,0x28,0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f,EOT}, @@ -442,6 +442,45 @@ {0x30,0x50,0x60,0x61,0x70,0x71,0x74,0x75,0xf0,EOT}, {0x00,0x00,0x00,0x00,0x00,0x03,0x04,0x04,0x05,EOT}}, {EOT}}}, + {0x8f1, "WPCD376I", { + {NOLDN, NULL, + {0x10,0x12,0x13,0x20,0x21,0x22,0x23,0x24,0x25,0x26, + 0x27,0x28,0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f,EOT}, + {0x00,0x00,0x00,0xf1,0x11,0x00,0x00,0x00,RSVD,0x00, + MISC,RSVD,0x01,0x2e,RSVD,RSVD,RSVD,RSVD,RSVD,EOT}}, + {0x0, "Floppy", + {0x30,0x60,0x61,0x70,0x71,0x74,0x75,0xf0,0xf1,0xf8, + EOT}, + {0x00,0x03,0xf2,0x06,0x03,0x02,0x04,0x24,0x00,0x24, + EOT}}, + {0x1, "Parallel port", + {0x30,0x60,0x61,0x70,0x71,0x74,0x75,0xf0,0xf8,EOT}, + {0x00,0x02,0x78,0x07,0x02,0x04,0x04,0xf2,0x07,EOT}}, + {0x2, "IR", + {0x30,0x60,0x61,0x70,0x71,0x74,0x75,0xf0,EOT}, + {0x00,0x02,0xf8,0x03,0x03,0x04,0x04,0x02,EOT}}, + {0x3, "COM1", + {0x30,0x60,0x61,0x70,0x71,0x74,0x75,0xf0,EOT}, + {0x00,0x03,0xf8,0x04,0x03,0x04,0x04,0x02,EOT}}, + {0x4, "System wake-up control (SWC)", + {0x30,0x50,0x60,0x61,0x62,0x63,0x70,0x71,0x74,0x75, + EOT}, + {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x04,0x04, + EOT}}, + {0x5, "Mouse", + {0x30,0x70,0x71,0x74,0x75,EOT}, + {0x00,0x0c,0x02,0x04,0x04,EOT}}, + {0x6, "Keyboard", + {0x30,0x60,0x61,0x62,0x63,0x70,0x71,0x74,0x75,0xf0, + EOT}, + {0x00,0x00,0x60,0x00,0x64,0x01,0x02,0x04,0x04,0x40, + EOT}}, + {0x7, "GPIO", + {0x30,0x50,0x60,0x61,0x70,0x71,0x74,0x75,0xf0,0xf1, + 0xf2,0xf3,0xf8,EOT}, + {0x00,0x00,0x00,0x00,0x00,0x03,0x04,0x04,0x00,MISC, + 0x00,MISC,0x01,EOT}}, + {EOT}}}, {0xf2, "PC87427", { /* SRID[7..5] is marked as "not applicable for the PC87427". */ {NOLDN, NULL, @@ -512,6 +551,7 @@ void probe_idregs_nsc(uint16_t port) { uint8_t id, rev; + int16_t magic;
probing_for("NSC", "", port);
@@ -532,17 +572,28 @@ rev = INB(port + 1); }
- if (superio_unknown(reg_table, id)) { + /* + * NSC PC8374L has id 0xf1, rev 0b000x xxxx according to datasheet + * Winbond WPCD376I has id 0xf1, rev 0b100x xxxx according to datasheet + */ + if (id == 0xf1) + magic = ((rev & 0xe0) << 4) | id; + else + magic = id; + + if (superio_unknown(reg_table, magic)) { if (verbose) printf(NOTFOUND "sid=0x%02x, srid=0x%02x\n", id, rev); return; }
- printf("Found NSC %s (sid=0x%02x, srid=0x%02x) at 0x%x\n", - get_superio_name(reg_table, id), id, rev, port); + printf("Found %s %s (sid=0x%02x, srid=0x%02x) at 0x%x\n", + magic == 0x8f1 ? "Winbond" : "NSC", + get_superio_name(reg_table, magic), id, rev, port); chip_found = 1;
- dump_superio("NSC", reg_table, port, id, LDN_SEL); + dump_superio(magic == 0x8f1 ? "Winbond" : "NSC", + reg_table, port, magic, LDN_SEL); }
void print_nsc_chips(void)
Hi,
On Thu, Oct 29, 2009 at 11:23:14AM +0000, Sean Young wrote:
On the Intel DG33TL motherboard, the Super I/O is an WPCD376I. Output:
Signed-off-by: Sean Young sean@mess.org
Thanks a lot for the output and for the patch! I'll commit the code soon, just two questions. The dump will be linked to from the wiki, so we have a reference for later usage.
@@ -532,17 +572,28 @@ rev = INB(port + 1); }
- if (superio_unknown(reg_table, id)) {
- /*
* NSC PC8374L has id 0xf1, rev 0b000x xxxx according to datasheet* Winbond WPCD376I has id 0xf1, rev 0b100x xxxx according to datasheet
Why is the code for this Winbond Super I/O in the nsc.c file? I assume the WPCD376I doesn't need any special enter/exit procedures? But even if that's the case, shouldn't the code still work fine in the winbond.c file?
@@ -512,6 +551,7 @@ void probe_idregs_nsc(uint16_t port) { uint8_t id, rev;
- int16_t magic;
This can be uint16_t right? Or is there some reason to make it signed explicitly?
Thanks, Uwe.
On Thu, Oct 29, 2009 at 08:54:47PM +0100, Uwe Hermann wrote:
Hi,
On Thu, Oct 29, 2009 at 11:23:14AM +0000, Sean Young wrote:
On the Intel DG33TL motherboard, the Super I/O is an WPCD376I. Output:
Signed-off-by: Sean Young sean@mess.org
Thanks a lot for the output and for the patch! I'll commit the code soon, just two questions. The dump will be linked to from the wiki, so we have a reference for later usage.
@@ -532,17 +572,28 @@ rev = INB(port + 1); }
- if (superio_unknown(reg_table, id)) {
- /*
* NSC PC8374L has id 0xf1, rev 0b000x xxxx according to datasheet* Winbond WPCD376I has id 0xf1, rev 0b100x xxxx according to datasheetWhy is the code for this Winbond Super I/O in the nsc.c file? I assume the WPCD376I doesn't need any special enter/exit procedures? But even if that's the case, shouldn't the code still work fine in the winbond.c file?
These two super I/O chips are almost identical -- as you can see above, it's just a revision. Current svn version misdetects the WPCD376I as a PC8374L.
In winbond.c, there is some code to do the detection four times, after writing 0x88, 0x89, etc do the super I/O port. This is completely ignored by the WPCD376I, causing the chip to be detected four times if it does there.
winbond.c can be changed to detect the WPCD376I, but since it looks and smells like an NSC chip, it fits better in nsc.c.
@@ -512,6 +551,7 @@ void probe_idregs_nsc(uint16_t port) { uint8_t id, rev;
- int16_t magic;
This can be uint16_t right? Or is there some reason to make it signed explicitly?
There is no need for it to be signed. Unsigned makes more sense actually.
Thanks, Sean
Hi,
On Fri, Oct 30, 2009 at 12:14:06PM +0000, Sean Young wrote:
- int16_t magic;
This can be uint16_t right? Or is there some reason to make it signed explicitly?
There is no need for it to be signed. Unsigned makes more sense actually.
Fixed.
Patch comitted in r4931, thanks! I also updated the wiki and linked to your sample dump there.
Uwe.
-
Sean Young -
Uwe Hermann