Author: stepan Date: 2009-11-09 11:53:41 +0000 (Mon, 09 Nov 2009) New Revision: 4928
Added: trunk/src/mainboard/technexion/tim5690/tn_post_code.c trunk/src/mainboard/technexion/tim5690/tn_post_code.h Modified: trunk/src/mainboard/technexion/tim5690/Config.lb trunk/src/mainboard/technexion/tim5690/Makefile.inc trunk/src/mainboard/technexion/tim5690/cache_as_ram_auto.c trunk/src/mainboard/technexion/tim5690/mainboard.c Log: These are post codes for TIM-5690 LED debug message.
Signed-off-by: Libra Li libra.li@technexion.com Added object reference to Config.lb, too and Acked-by: Stefan Reinauer stepan@coresystems.de
Modified: trunk/src/mainboard/technexion/tim5690/Config.lb =================================================================== --- trunk/src/mainboard/technexion/tim5690/Config.lb 2009-11-07 00:45:17 UTC (rev 4927) +++ trunk/src/mainboard/technexion/tim5690/Config.lb 2009-11-09 11:53:41 UTC (rev 4928) @@ -30,6 +30,7 @@ ##
driver mainboard.o +object tn_post_code.o
#dir /drivers/si/3114
Modified: trunk/src/mainboard/technexion/tim5690/Makefile.inc =================================================================== --- trunk/src/mainboard/technexion/tim5690/Makefile.inc 2009-11-07 00:45:17 UTC (rev 4927) +++ trunk/src/mainboard/technexion/tim5690/Makefile.inc 2009-11-09 11:53:41 UTC (rev 4928) @@ -29,6 +29,9 @@ obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o obj-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.o
+# This is debug message for products of Technexion. +obj-y += tn_post_code.o + # This is part of the conversion to init-obj and away from included code.
initobj-y += crt0.o
Modified: trunk/src/mainboard/technexion/tim5690/cache_as_ram_auto.c =================================================================== --- trunk/src/mainboard/technexion/tim5690/cache_as_ram_auto.c 2009-11-07 00:45:17 UTC (rev 4927) +++ trunk/src/mainboard/technexion/tim5690/cache_as_ram_auto.c 2009-11-09 11:53:41 UTC (rev 4928) @@ -100,6 +100,10 @@
#include "cpu/amd/model_fxx/fidvid.c"
+#define TECHNEXION_EARLY_SETUP +#include "tn_post_code.c" + + #if CONFIG_USE_FALLBACK_IMAGE == 1
#include "northbridge/amd/amdk8/early_ht.c" @@ -161,6 +165,8 @@ struct cpuid_result cpuid1; struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
+ technexion_post_code_init(); + technexion_post_code(LED_MESSAGE_START);
if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); @@ -233,7 +239,11 @@ /* It's the time to set ctrl now; */ printk_debug("sysinfo->nodes: %2x sysinfo->ctrl: %2x spd_addr: %2x\n", sysinfo->nodes, sysinfo->ctrl, spd_addr); + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + technexion_post_code(LED_MESSAGE_RAM); + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
rs690_before_pci_init();
Modified: trunk/src/mainboard/technexion/tim5690/mainboard.c =================================================================== --- trunk/src/mainboard/technexion/tim5690/mainboard.c 2009-11-07 00:45:17 UTC (rev 4927) +++ trunk/src/mainboard/technexion/tim5690/mainboard.c 2009-11-09 11:53:41 UTC (rev 4928) @@ -27,6 +27,7 @@ #include <device/pci_def.h> #include <../southbridge/amd/sb600/sb600.h> #include "chip.h" +#include "tn_post_code.h"
#define ADT7461_ADDRESS 0x4C #define ARA_ADDRESS 0x0C /* Alert Response Address */ @@ -44,12 +45,18 @@ #define ADT7461_write_byte(address, val) \ do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val)
+/* previous + */ +void tim5690_enable(device_t dev); +int add_mainboard_resources(struct lb_memory *mem); + + uint64_t uma_memory_base, uma_memory_size;
/* set thermal config */ -static void set_thermal_config() +static void set_thermal_config(void) { u8 byte; u16 word; @@ -176,6 +183,7 @@ lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, uma_memory_size); #endif + technexion_post_code(LED_MESSAGE_FINISH); }
struct chip_operations mainboard_ops = {
Added: trunk/src/mainboard/technexion/tim5690/tn_post_code.c =================================================================== --- trunk/src/mainboard/technexion/tim5690/tn_post_code.c (rev 0) +++ trunk/src/mainboard/technexion/tim5690/tn_post_code.c 2009-11-09 11:53:41 UTC (rev 4928) @@ -0,0 +1,207 @@ + +#ifdef TECHNEXION_EARLY_SETUP + +#include <arch/cpu.h> +#include "southbridge/amd/sb600/sb600.h" + +#else + +#include <device/pci.h> +#include <device/pci_ids.h> + +#endif + +#include "tn_post_code.h" + + +#ifdef TECHNEXION_EARLY_SETUP + +// TechNexion's Post Code Initially. +void technexion_post_code_init(void) +{ + uint8_t reg8_data; + device_t dev=0; + + // SMBus Module and ACPI Block (Device 20, Function 0) + dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB600_SM), 0); + + // LED[bit0]:GPIO0 + // This is reference SB600 RRG 4.1.1 GPIO + reg8_data = pmio_read(0x60); + reg8_data |= (1<<7); // 1: GPIO if not used by SATA + pmio_write(0x60, reg8_data); + + reg8_data = pci_read_config8(dev, 0x80); + reg8_data = ((reg8_data | (1<<0)) & ~(1<<4)); + pci_write_config8(dev, 0x80, reg8_data); + + // LED[bit1]:GPIO1 + // This is reference SB600 RRG 4.1.1 GPIO + reg8_data = pci_read_config8(dev, 0x80); + reg8_data = ((reg8_data | (1<<1)) & ~(1<<5)); + pci_write_config8(dev, 0x80, reg8_data); + + // LED[bit2]:GPIO4 + // This is reference SB600 RRG 4.1.1 GPIO + reg8_data = pmio_read(0x5e); + reg8_data &= ~(1<<7); // 0: GPIO if not used by SATA + pmio_write(0x5e, reg8_data); + + reg8_data = pci_read_config8(dev, 0xa8); + reg8_data |= (1<<0); + pci_write_config8(dev, 0xa8, reg8_data); + + reg8_data = pci_read_config8(dev, 0xa9); + reg8_data &= ~(1<<0); + pci_write_config8(dev, 0xa9, reg8_data); + + // LED[bit3]:GPIO6 + // This is reference SB600 RRG 4.1.1 GPIO + reg8_data = pmio_read(0x60); + reg8_data |= (1<<7); // 1: GPIO if not used by SATA + pmio_write(0x60, reg8_data); + + reg8_data = pci_read_config8(dev, 0xa8); + reg8_data |= (1<<2); + pci_write_config8(dev, 0xa8, reg8_data); + + reg8_data = pci_read_config8(dev, 0xa9); + reg8_data &= ~(1<<2); + pci_write_config8(dev, 0xa9, reg8_data); + // LED[bit4]:GPIO7 + // This is reference SB600 RRG 4.1.1 GPIO + reg8_data = pci_read_config8(dev, 0xa8); + reg8_data |= (1<<3); + pci_write_config8(dev, 0xa8, reg8_data); + + reg8_data = pci_read_config8(dev, 0xa9); + reg8_data &= ~(1<<3); + pci_write_config8(dev, 0xa9, reg8_data); + + // LED[bit5]:GPIO8 + // This is reference SB600 RRG 4.1.1 GPIO + reg8_data = pci_read_config8(dev, 0xa8); + reg8_data |= (1<<4); + pci_write_config8(dev, 0xa8, reg8_data); + + reg8_data = pci_read_config8(dev, 0xa9); + reg8_data &= ~(1<<4); + pci_write_config8(dev, 0xa9, reg8_data); + + // LED[bit6]:GPIO10 + // This is reference SB600 RRG 4.1.1 GPIO + reg8_data = pci_read_config8(dev, 0xab); + reg8_data = ((reg8_data | (1<<0)) & ~(1<<1)); + pci_write_config8(dev, 0xab, reg8_data); + + // LED[bit7]:GPIO66 + // This is reference SB600 RRG 4.1.1 GPIO + reg8_data = pmio_read(0x68); + reg8_data &= ~(1<<5); // 0: GPIO + pmio_write(0x68, reg8_data); + + reg8_data = pci_read_config8(dev, 0x7e); + reg8_data = ((reg8_data | (1<<1)) & ~(1<<5)); + pci_write_config8(dev, 0x7e, reg8_data); + +} + +#endif + +/* TechNexion's Post Code. + */ +void technexion_post_code(uint8_t udata8) +{ + uint8_t u8_data; + device_t dev=0; + + // SMBus Module and ACPI Block (Device 20, Function 0) +#ifdef TECHNEXION_EARLY_SETUP + dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB600_SM), 0); +#else + dev = dev_find_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB600_SM, 0); +#endif + + udata8 = ~(udata8); + + // LED[bit0]:GPIO0 + u8_data = pci_read_config8(dev, 0x80); + if (udata8 & 0x1) { + u8_data |= (1<<0); + } + else { + u8_data &= ~(1<<0); + } + pci_write_config8(dev, 0x80, u8_data); + + // LED[bit1]:GPIO1 + u8_data = pci_read_config8(dev, 0x80); + if (udata8 & 0x2) { + u8_data |= (1<<1); + } + else { + u8_data &= ~(1<<1); + } + pci_write_config8(dev, 0x80, u8_data); + + // LED[bit2]:GPIO4 + u8_data = pci_read_config8(dev, 0xa8); + if (udata8 & 0x4) { + u8_data |= (1<<0); + } + else { + u8_data &= ~(1<<0); + } + pci_write_config8(dev, 0xa8, u8_data); + + // LED[bit3]:GPIO6 + u8_data = pci_read_config8(dev, 0xa8); + if (udata8 & 0x8) { + u8_data |= (1<<2); + } + else { + u8_data &= ~(1<<2); + } + pci_write_config8(dev, 0xa8, u8_data); + + // LED[bit4]:GPIO7 + u8_data = pci_read_config8(dev, 0xa8); + if (udata8 & 0x10) { + u8_data |= (1<<3); + } + else { + u8_data &= ~(1<<3); + } + pci_write_config8(dev, 0xa8, u8_data); + + // LED[bit5]:GPIO8 + u8_data = pci_read_config8(dev, 0xa8); + if (udata8 & 0x20) { + u8_data |= (1<<4); + } + else { + u8_data &= ~(1<<4); + } + pci_write_config8(dev, 0xa8, u8_data); + + // LED[bit6]:GPIO10 + u8_data = pci_read_config8(dev, 0xab); + if (udata8 & 0x40) { + u8_data |= (1<<0); + } + else { + u8_data &= ~(1<<0); + } + pci_write_config8(dev, 0xab, u8_data); + + // LED[bit7]:GPIO66 + u8_data = pci_read_config8(dev, 0x7e); + if (udata8 & 0x80) { + u8_data |= (1<<1); + } + else { + u8_data &= ~(1<<1); + } + pci_write_config8(dev, 0x7e, u8_data); + +}
Added: trunk/src/mainboard/technexion/tim5690/tn_post_code.h =================================================================== --- trunk/src/mainboard/technexion/tim5690/tn_post_code.h (rev 0) +++ trunk/src/mainboard/technexion/tim5690/tn_post_code.h 2009-11-09 11:53:41 UTC (rev 4928) @@ -0,0 +1,15 @@ + + +#define LED_MESSAGE_START 0xFF +#define LED_MESSAGE_FINISH 0x99 +#define LED_MESSAGE_RAM 0x01 + + +#ifdef TECHNEXION_EARLY_SETUP + +// TechNexion's Post Code Initially. +void technexion_post_code_init(void); + +#endif + +void technexion_post_code(uint8_t udata8);
-
svn＠coreboot.org