Patch set updated for coreboot: f59736a F15tn / Hudson: Change SATA NumOfPorts register setting

[Paul Menzel]

Paul Menzel ([e-mail]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2165

-gerrit

commit f59736a755351379209f17a653dd14ebd4187efb
Author: Martin Roth 
Date:   Wed Jan 16 17:50:32 2013 -0700

F15tn / Hudson: Change SATA NumOfPorts register setting

The Number of Ports register says that it should be set to the maximum
    number of ports supported by the silicon.  AGESA was setting this to be
    the number of enabled ports.  If port 1 was the only port with a drive,
    this value got set to 0, indicating 1 port.  This causes SeaBIOS to only
    look at port 0 and quit, never finding the drive on port 1.

Dave Frodin: I also verified that this patch allows a SATA drive plugged
    into port 2 to be detected without a device in port 1.

Change-Id: I5d49e351864449520e3957bbb07edf0f3ec2fd47
    Signed-off-by: Martin Roth 
---
 .../Fch/Sata/Family/Hudson2/Hudson2SataService.c   | 25 ++++++----------------
 1 file changed, 7 insertions(+), 18 deletions(-)

diff --git a/src/vendorcode/amd/agesa/f15tn/Proc/Fch/Sata/Family/Hudson2/Hudson2SataService.c b/src/vendorcode/amd/agesa/f15tn/Proc/Fch/Sata/Family/Hudson2/Hudson2SataService.c
index d3eb263..bf97f8b 100644
--- a/src/vendorcode/amd/agesa/f15tn/Proc/Fch/Sata/Family/Hudson2/Hudson2SataService.c
+++ b/src/vendorcode/amd/agesa/f15tn/Proc/Fch/Sata/Family/Hudson2/Hudson2SataService.c
@@ -83,7 +83,6 @@
  *                   D E F I N I T I O N S    A N D    M A C R O S
  *----------------------------------------------------------------------------------------
  */
-UINT8  NumOfSataPorts = 8;

/**
  * FchSataGpioInitial - Sata GPIO function Procedure
@@ -581,7 +580,6 @@ FchShutdownUnconnectedSataPortClock (
 {
   UINT8                  PortNumByte;
   UINT8                  PortSataStatusByte;
-  UINT8                  NumOfPorts;
   UINT8                  FchSataClkAutoOff;
   FCH_DATA_BLOCK         *LocalCfgPtr;
   AMD_CONFIG_PARAMS      *StdHeader;
@@ -590,7 +588,6 @@ FchShutdownUnconnectedSataPortClock (
   StdHeader = LocalCfgPtr->StdHeader;
   FchSataClkAutoOff = (UINT8) LocalCfgPtr->Sata.SataClkAutoOff;

-  NumOfPorts = 0;
   //
   // Enable SATA auto clock control by default
   //
@@ -606,28 +603,20 @@ FchShutdownUnconnectedSataPortClock (
     }
   }                                            ///end of for (PortNumByte=0;PortNumByte<6;PortNumByte++)

-  ReadMem (Bar5 + 0x0C, AccessWidth8, &PortSataStatusByte);
-
   //
+  //Set the Ports Implemented register
   //if all ports are in disabled state, report at least one port
   //
+  ReadMem (Bar5 + 0x0C, AccessWidth8, &PortSataStatusByte);
   if ( (PortSataStatusByte & 0xFF) == 0) {
     RwMem (Bar5 + 0x0C, AccessWidth8, (UINT32) ~(0xFF), 01);
   }

-  ReadMem (Bar5 + 0x0C, AccessWidth8, &PortSataStatusByte);
-
-  for (PortNumByte = 0; PortNumByte < MAX_SATA_PORTS; PortNumByte ++) {
-    if (PortSataStatusByte & (1 << PortNumByte)) {
-      NumOfPorts++;
-    }
-  }
-
-  if ( NumOfPorts == 0) {
-    NumOfPorts = 0x01;
-  }
-
-  RwMem (Bar5 + 0x00, AccessWidth8, 0xE0, NumOfPorts - 1);
+  //
+  // Number of Ports (NP): 0’s based value indicating the maximum number
+  //  of ports supported by the HBA silicon.
+  //
+  RwMem (Bar5 + 0x00, AccessWidth8, 0xE0, MAX_SATA_PORTS - 1);
 }

/**