[PATCH]

[Mondrian Nuessle]

Hi!

Used flashrom on an iWILL-DK8-HTX board again after a long time. There seems really to be a typo in
w83627hf_gpio24_raise_2e, at least for the iwill board. It should of course read 0x2e and not 0x2d...
I tested this only on a iwill board, though. No idea about the Agami Aruma... but I assume it's the same.
I attached the patch (trivial).

Regards,
Mondrian

[ron minnich]

On Thu, Apr 9, 2009 at 6:58 AM, Mondrian Nuessle  wrote:
> Hi!
>
> Used flashrom on an iWILL-DK8-HTX board again after a long time. There seems really to be a typo in
> w83627hf_gpio24_raise_2e, at least for the iwill board. It should of course read 0x2e and not 0x2d...
> I tested this only on a iwill board, though. No idea about the Agami Aruma... but I assume it's the same.
> I attached the patch (trivial).

seems you are right, but I have no way to test. Aruma is dead and gone.

I wonder if we can test on a board where this was known to work and
make sure it doesn't break a known-good board.

ron