Stefan Reinauer (stefan.reinauer@coreboot.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2481
-gerrit
commit 0f25d3cbb88893a57ae20543a5cc5294d1965dca Author: Stefan Reinauer reinauer@chromium.org Date: Thu Feb 21 15:39:35 2013 -0800
Add support for Google ChromeEC
Google ChromeEC is an EC with completely open source firmware. See https://gerrit.chromium.org/gerrit/gitweb?p=chromiumos/platform/ec.git;a=sum... for the EC firmware source code (aka more information about the ChromeEC)
This patch adds support for the ChromeEC on coreboot's side.
Great thanks to the ChromeEC team for this amazing work. It's another important milestone towards a free and open firmware stack on modern hardware.
Change-Id: Iace78af9d291791d2f5f80ccca1587b418738cec Signed-off-by: Stefan Reinauer reinauer@coreboot.org --- src/ec/Kconfig | 1 + src/ec/Makefile.inc | 2 +- src/ec/google/Kconfig | 1 + src/ec/google/Makefile.inc | 1 + src/ec/google/chromeec/Kconfig | 11 + src/ec/google/chromeec/Makefile.inc | 5 + src/ec/google/chromeec/acpi/ac.asl | 36 ++ src/ec/google/chromeec/acpi/battery.asl | 230 +++++++ src/ec/google/chromeec/acpi/ec.asl | 230 +++++++ src/ec/google/chromeec/acpi/superio.asl | 152 +++++ src/ec/google/chromeec/chip.h | 32 + src/ec/google/chromeec/ec.c | 519 +++++++++++++++ src/ec/google/chromeec/ec.h | 49 ++ src/ec/google/chromeec/ec_commands.h | 1069 +++++++++++++++++++++++++++++++ 14 files changed, 2337 insertions(+), 1 deletion(-)
diff --git a/src/ec/Kconfig b/src/ec/Kconfig index 7095310..d3ac471 100644 --- a/src/ec/Kconfig +++ b/src/ec/Kconfig @@ -1,5 +1,6 @@ source src/ec/acpi/Kconfig source src/ec/compal/Kconfig +source src/ec/google/Kconfig source src/ec/lenovo/Kconfig source src/ec/smsc/Kconfig source src/ec/quanta/Kconfig diff --git a/src/ec/Makefile.inc b/src/ec/Makefile.inc index 9bade5f..b363016 100644 --- a/src/ec/Makefile.inc +++ b/src/ec/Makefile.inc @@ -1,2 +1,2 @@ subdirs-$(CONFIG_EC_ACPI) += acpi -subdirs-y += compal lenovo smsc quanta +subdirs-y += compal google lenovo smsc quanta diff --git a/src/ec/google/Kconfig b/src/ec/google/Kconfig new file mode 100644 index 0000000..f83741e --- /dev/null +++ b/src/ec/google/Kconfig @@ -0,0 +1 @@ +source src/ec/google/chromeec/Kconfig diff --git a/src/ec/google/Makefile.inc b/src/ec/google/Makefile.inc new file mode 100644 index 0000000..9ca3f0f --- /dev/null +++ b/src/ec/google/Makefile.inc @@ -0,0 +1 @@ +subdirs-$(CONFIG_EC_GOOGLE_CHROMEEC) += chromeec diff --git a/src/ec/google/chromeec/Kconfig b/src/ec/google/chromeec/Kconfig new file mode 100644 index 0000000..b8d3444 --- /dev/null +++ b/src/ec/google/chromeec/Kconfig @@ -0,0 +1,11 @@ +config EC_GOOGLE_CHROMEEC + bool + help + Google's Chrome EC + +config EC_GOOGLE_API_ROOT + depends on EC_GOOGLE_CHROMEEC + string "Path to the EC API include file" + default "/usr/include" + help + Path to the ec API file (ec/ec_commands.h). diff --git a/src/ec/google/chromeec/Makefile.inc b/src/ec/google/chromeec/Makefile.inc new file mode 100644 index 0000000..93ad333 --- /dev/null +++ b/src/ec/google/chromeec/Makefile.inc @@ -0,0 +1,5 @@ +ramstage-y += ec.c +smm-y += ec.c +romstage-y += ec.c + +CFLAGS += -I $(call strip_quotes,$(CONFIG_EC_GOOGLE_API_ROOT)) diff --git a/src/ec/google/chromeec/acpi/ac.asl b/src/ec/google/chromeec/acpi/ac.asl new file mode 100644 index 0000000..34b9080 --- /dev/null +++ b/src/ec/google/chromeec/acpi/ac.asl @@ -0,0 +1,36 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +// Scope (EC0) + +Device (AC) +{ + Name (_HID, "ACPI0003") + Name (_PCL, Package () { _SB }) + + Method (_PSR) + { + Return (ACEX) + } + + Method (_STA) + { + Return (0x0F) + } +} diff --git a/src/ec/google/chromeec/acpi/battery.asl b/src/ec/google/chromeec/acpi/battery.asl new file mode 100644 index 0000000..341911c --- /dev/null +++ b/src/ec/google/chromeec/acpi/battery.asl @@ -0,0 +1,230 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +// Scope (EC0) + +Device (BAT0) +{ + Name (_HID, EISAID ("PNP0C0A")) + Name (_UID, 1) + Name (_PCL, Package () { _SB }) + + Name (PBIF, Package () { + 0x00000001, // 0x00: Power Unit: mAh + 0xFFFFFFFF, // 0x01: Design Capacity + 0xFFFFFFFF, // 0x02: Last Full Charge Capacity + 0x00000001, // 0x03: Battery Technology: Rechargeable + 0xFFFFFFFF, // 0x04: Design Voltage + 0x00000003, // 0x05: Design Capacity of Warning + 0xFFFFFFFF, // 0x06: Design Capacity of Low + 0x00000001, // 0x07: Capacity Granularity 1 + 0x00000001, // 0x08: Capacity Granularity 2 + "", // 0x09: Model Number + "", // 0x0a: Serial Number + "LION", // 0x0b: Battery Type + "" // 0x0c: OEM Information + }) + + Name (PBIX, Package () { + 0x00000000, // 0x00: Revision + 0x00000001, // 0x01: Power Unit: mAh + 0xFFFFFFFF, // 0x02: Design Capacity + 0xFFFFFFFF, // 0x03: Last Full Charge Capacity + 0x00000001, // 0x04: Battery Technology: Rechargeable + 0xFFFFFFFF, // 0x05: Design Voltage + 0x00000003, // 0x06: Design Capacity of Warning + 0xFFFFFFFF, // 0x07: Design Capacity of Low + 0x00000000, // 0x08: Cycle Count + 0x00018000, // 0x09: Measurement Accuracy (98.3%?) + 0x000001F4, // 0x0a: Max Sampling Time (500ms) + 0x0000000a, // 0x0b: Min Sampling Time (10ms) + 0xFFFFFFFF, // 0x0c: Max Averaging Interval + 0xFFFFFFFF, // 0x0d: Min Averaging Interval + 0x00000001, // 0x0e: Capacity Granularity 1 + 0x00000001, // 0x0f: Capacity Granularity 2 + "", // 0x10 Model Number + "", // 0x11: Serial Number + "LION", // 0x12: Battery Type + "" // 0x13: OEM Information + }) + + Name (PBST, Package () { + 0x00000000, // 0x00: Battery State + 0xFFFFFFFF, // 0x01: Battery Present Rate + 0xFFFFFFFF, // 0x02: Battery Remaining Capacity + 0xFFFFFFFF, // 0x03: Battery Present Voltage + }) + Name (BSTP, Zero) + + // Workaround for full battery status, enabled by default + Name (BFWK, One) + + // Method to enable full battery workaround + Method (BFWE) + { + Store (One, BFWK) + } + + // Method to disable full battery workaround + Method (BFWD) + { + Store (Zero, BFWK) + } + + Method (_STA, 0, Serialized) + { + If (BTEX) { + Return (0x1F) + } Else { + Return (0x0F) + } + } + + Method (_BIF, 0, Serialized) + { + // Last Full Charge Capacity + Store (BTDF, Index (PBIF, 2)) + + // Design Voltage + Store (BTDV, Index (PBIF, 4)) + + // Design Capacity + Store (BTDA, Local0) + Store (Local0, Index (PBIF, 1)) + + // Design Capacity of Warning + Divide (Multiply (Local0, DWRN), 100, Local1, Local2) + Store (Local2, Index (PBIF, 5)) + + // Design Capacity of Low + Divide (Multiply (Local0, DLOW), 100, Local1, Local2) + Store (Local2, Index (PBIF, 6)) + + // Get battery info from mainboard + Store (ToString(BMOD), Index (PBIF, 9)) + Store (ToString(BSER), Index (PBIF, 10)) + Store (ToString(BMFG), Index (PBIF, 12)) + + Return (PBIF) + } + + // Extended Battery info method is disabled for now due to + // a bug in the Linux kernel: http://crosbug.com/28747 + Method (XBIX, 0, Serialized) + { + // Last Full Charge Capacity + Store (BTDF, Index (PBIX, 3)) + + // Design Voltage + Store (BTDV, Index (PBIX, 5)) + + // Design Capacity + Store (BTDA, Local0) + Store (Local0, Index (PBIX, 2)) + + // Design Capacity of Warning + Divide (Multiply (Local0, DWRN), 100, Local1, Local2) + Store (Local2, Index (PBIX, 6)) + + // Design Capacity of Low + Divide (Multiply (Local0, DLOW), 100, Local1, Local2) + Store (Local2, Index (PBIX, 7)) + + // Cycle Count + Store (BTCC, Index (PBIX, 8)) + + // Get battery info from mainboard + Store (ToString(BMOD), Index (PBIX, 16)) + Store (ToString(BSER), Index (PBIX, 17)) + Store (ToString(BMFG), Index (PBIX, 19)) + + Return (PBIX) + } + + Method (_BST, 0, Serialized) + { + // + // 0: BATTERY STATE + // + // bit 0 = discharging + // bit 1 = charging + // bit 2 = critical level + // + Store (Zero, Local1) + + // Check if AC is present + If (ACEX) { + If (BFCG) { + Store (0x02, Local1) + } ElseIf (BFDC) { + Store (0x01, Local1) + } + } Else { + // Always discharging when on battery power + Store (0x01, Local1) + } + + // Check for critical battery level + If (BFCR) { + Or (Local1, 0x04, Local1) + } + Store (Local1, Index (PBST, 0)) + + // Notify if battery state has changed since last time + If (LNotEqual (Local1, BSTP)) { + Store (Local1, BSTP) + Notify (BAT0, 0x80) + } + + // + // 1: BATTERY PRESENT RATE + // + Store (BTPR, Index (PBST, 1)) + + // + // 2: BATTERY REMAINING CAPACITY + // + Store (BTRA, Local1) + If (LAnd (BFWK, LAnd (ACEX, LNot (LAnd (BFDC, BFCG))))) { + // On AC power and battery is neither charging + // nor discharging. Linux expects a full battery + // to report same capacity as last full charge. + // https://bugzilla.kernel.org/show_bug.cgi?id=12632 + Store (BTDF, Local2) + + // See if within ~3% of full + ShiftRight (Local2, 5, Local3) + If (LAnd (LGreater (Local1, Subtract (Local2, Local3)), + LLess (Local1, Add (Local2, Local3)))) + { + Store (Local2, Local1) + } + } + Store (Local1, Index (PBST, 2)) + + // + // 3: BATTERY PRESENT VOLTAGE + // + Store (BTVO, Index (PBST, 3)) + + Return (PBST) + } +} diff --git a/src/ec/google/chromeec/acpi/ec.asl b/src/ec/google/chromeec/acpi/ec.asl new file mode 100644 index 0000000..2fb8e79 --- /dev/null +++ b/src/ec/google/chromeec/acpi/ec.asl @@ -0,0 +1,230 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * The mainboard must define a PNOT method to handle power + * state notifications and Notify CPU device objects to + * re-evaluate their _PPC and _CST tables. + */ + +Device (EC0) +{ + Name (_HID, EISAID ("PNP0C09")) + Name (_UID, 1) + Name (_GPE, Add(EC_SCI_GPI, 16)) + Name (TOFS, EC_TEMP_SENSOR_OFFSET) + Name (TNOP, 0xFD) // Thermal sensor has no power + Name (TBAD, 0xFE) // Thermal sensor bad reading + Name (TNPR, 0xFF) // Thermal sensor not present + Name (DWRN, 15) // Battery capacity warning at 15% + Name (DLOW, 10) // Battery capacity low at 10% + + OperationRegion (ERAM, EmbeddedControl, 0x00, 0xff) + Field (ERAM, ByteAcc, Lock, Preserve) + { + Offset (0x00), + RAMV, 8, // EC RAM Version + TSTB, 8, // Test Byte + TSTC, 8, // Complement of Test Byte + KBLV, 8, // Keyboard Backlight + } + + OperationRegion (EMEM, SystemIO, EC_LPC_ADDR_MEMMAP, EC_MEMMAP_SIZE) + Field (EMEM, ByteAcc, NoLock, Preserve) + { + Offset (0x00), + TIN0, 8, // Temperature 0 + TIN1, 8, // Temperature 1 + TIN2, 8, // Temperature 2 + TIN3, 8, // Temperature 3 + TIN4, 8, // Temperature 4 + TIN5, 8, // Temperature 5 + TIN6, 8, // Temperature 6 + TIN7, 8, // Temperature 7 + TIN8, 8, // Temperature 8 + TIN9, 8, // Temperature 9 + Offset (0x10), + FAN0, 16, // Fan Speed 0 + Offset (0x30), + LIDS, 1, // Lid Switch State + PBTN, 1, // Power Button Pressed + WPDI, 1, // Write Protect Disabled + RECK, 1, // Keyboard Initiated Recovery + RECD, 1, // Dedicated Recovery Mode + Offset (0x40), + BTVO, 32, // Battery Present Voltage + BTPR, 32, // Battery Present Rate + BTRA, 32, // Battery Remaining Capacity + ACEX, 1, // AC Present + BTEX, 1, // Battery Present + BFDC, 1, // Battery Discharging + BFCG, 1, // Battery Charging + BFCR, 1, // Battery Level Critical + Offset (0x50), + BTDA, 32, // Battery Design Capacity + BTDV, 32, // Battery Design Voltage + BTDF, 32, // Battery Last Full Charge Capacity + BTCC, 32, // Battery Cycle Count + BMFG, 64, // Battery Manufacturer String + BMOD, 64, // Battery Model String + BSER, 64, // Battery Serial String + BTYP, 64, // Battery Type String + } + + Method (TINS, 1, Serialized) + { + Switch (ToInteger (Arg0)) + { + Case (0) { Return (TIN0) } + Case (1) { Return (TIN1) } + Case (2) { Return (TIN2) } + Case (3) { Return (TIN3) } + Case (4) { Return (TIN4) } + Case (5) { Return (TIN5) } + Case (6) { Return (TIN6) } + Case (7) { Return (TIN7) } + Case (8) { Return (TIN8) } + Case (9) { Return (TIN9) } + Default { Return (TIN0) } + } + } + + Method (_CRS, 0, NotSerialized) + { + Name (ECMD, ResourceTemplate() + { + IO (Decode16, + EC_LPC_ADDR_ACPI_DATA, + EC_LPC_ADDR_ACPI_DATA, + 0, 1) + IO (Decode16, + EC_LPC_ADDR_ACPI_CMD, + EC_LPC_ADDR_ACPI_CMD, + 0, 1) + }) + Return (ECMD) + } + + Method (_REG, 2, NotSerialized) + { + // Initialize AC power state + Store (ACEX, \PWRS) + + // Initialize LID switch state + Store (LIDS, \LIDS) + } + + // Lid Closed Event + Method (_Q01, 0, NotSerialized) + { + Store ("EC: LID CLOSE", Debug) + Store (LIDS, \LIDS) + Notify (_SB.LID0, 0x80) + } + + // Lid Open Event + Method (_Q02, 0, NotSerialized) + { + Store ("EC: LID OPEN", Debug) + Store (LIDS, \LIDS) + Notify (_SB.LID0, 0x80) + } + + // Power Button + Method (_Q03, 0, NotSerialized) + { + Store ("EC: POWER BUTTON", Debug) + Notify (_SB.PWRB, 0x80) + } + + // AC Connected + Method (_Q04, 0, NotSerialized) + { + Store ("EC: AC CONNECTED", Debug) + Store (ACEX, \PWRS) + Notify (AC, 0x80) + \PNOT () + } + + // AC Disconnected + Method (_Q05, 0, NotSerialized) + { + Store ("EC: AC DISCONNECTED", Debug) + Store (ACEX, \PWRS) + Notify (AC, 0x80) + \PNOT () + } + + // Battery Low Event + Method (_Q06, 0, NotSerialized) + { + Store ("EC: BATTERY LOW", Debug) + Notify (BAT0, 0x80) + } + + // Battery Critical Event + Method (_Q07, 0, NotSerialized) + { + Store ("EC: BATTERY CRITICAL", Debug) + Notify (BAT0, 0x80) + } + + // Battery Info Event + Method (_Q08, 0, NotSerialized) + { + Store ("EC: BATTERY INFO", Debug) + Notify (BAT0, 0x81) + } + + // Thermal Treshold Event + Method (_Q09, 0, NotSerialized) + { + Store ("EC: THERMAL THRESHOLD", Debug) + Notify (_TZ, 0x80) + } + + // Thermal Overload Event + Method (_Q0A, 0, NotSerialized) + { + Store ("EC: THERMAL OVERLOAD", Debug) + Notify (_TZ, 0x80) + } + + // Thermal Event + Method (_Q0B, 0, NotSerialized) + { + Store ("EC: THERMAL", Debug) + Notify (_TZ, 0x80) + } + + // USB Charger + Method (_Q0C, 0, NotSerialized) + { + Store ("EC: USB CHARGER", Debug) + } + + // Key Pressed + Method (_Q0D, 0, NotSerialized) + { + Store ("EC: KEY PRESSED", Debug) + } + + #include "ac.asl" + #include "battery.asl" +} diff --git a/src/ec/google/chromeec/acpi/superio.asl b/src/ec/google/chromeec/acpi/superio.asl new file mode 100644 index 0000000..56f0f18 --- /dev/null +++ b/src/ec/google/chromeec/acpi/superio.asl @@ -0,0 +1,152 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * Chrome OS Embedded Controller interface + * + * Constants that should be defined: + * + * SIO_EC_MEMMAP_ENABLE : Enable EC LPC memory map resources + * EC_LPC_ADDR_MEMMAP : Base address of memory map range + * EC_MEMMAP_SIZE : Size of memory map range + * + * SIO_EC_HOST_ENABLE : Enable EC host command interface resources + * EC_LPC_ADDR_HOST_DATA : EC host command interface data port + * EC_LPC_ADDR_HOST_CMD : EC host command interface command port + * EC_LPC_ADDR_OLD_PARAM : EC host command parameter range base (old) + * EC_OLD_PARAM_SIZE : Parameter buffer size (old) + */ + +// Scope is _SB.PCI0.LPCB + +Device (SIO) { + Name (_UID, 0) + Name (_ADR, 0) + +#ifdef SIO_EC_MEMMAP_ENABLE + Device (ECMM) { + Name (_HID, EISAID ("PNP0C02")) + Name (_UID, 1) + Name (_ADR, 0) + + Method (_STA, 0, NotSerialized) { + Return (0x0F) + } + + Name (_CRS, ResourceTemplate () + { + FixedIO (EC_LPC_ADDR_MEMMAP, EC_MEMMAP_SIZE) + }) + + Name (_PRS, ResourceTemplate () + { + FixedIO (EC_LPC_ADDR_MEMMAP, EC_MEMMAP_SIZE) + }) + } +#endif + +#ifdef SIO_EC_HOST_ENABLE + Device (ECUI) { + Name (_HID, EISAID ("PNP0C02")) + Name (_UID, 3) + Name (_ADR, 0) + + Method (_STA, 0, NotSerialized) { + Return (0x0F) + } + + Name (_CRS, ResourceTemplate () + { + FixedIO (EC_LPC_ADDR_HOST_DATA, 1) + FixedIO (EC_LPC_ADDR_HOST_CMD, 1) + FixedIO (EC_LPC_ADDR_OLD_PARAM, + EC_OLD_PARAM_SIZE) + }) + + Name (_PRS, ResourceTemplate () + { + StartDependentFn (0, 0) { + FixedIO (EC_LPC_ADDR_HOST_DATA, 1) + FixedIO (EC_LPC_ADDR_HOST_CMD, 1) + FixedIO (EC_LPC_ADDR_OLD_PARAM, + EC_OLD_PARAM_SIZE) + } + EndDependentFn () + }) + } +#endif + +#ifdef SIO_EC_ENABLE_COM1 + Device (COM1) { + Name (_HID, EISAID ("PNP0501")) + Name (_UID, 1) + Name (_ADR, 0) + + Method (_STA, 0, NotSerialized) { + Return (0x0F) + } + + Name (_CRS, ResourceTemplate () + { + FixedIO (0x03F8, 0x08) + IRQNoFlags () {4} + }) + + Name (_PRS, ResourceTemplate () + { + StartDependentFn (0, 0) { + FixedIO (0x03F8, 0x08) + IRQNoFlags () {4} + } + EndDependentFn () + }) + } +#endif + +#ifdef SIO_EC_ENABLE_PS2K + Device (PS2K) // Keyboard + { + Name (_UID, 0) + Name (_ADR, 0) + Name (_HID, EISAID("PNP0303")) + Name (_CID, EISAID("PNP030B")) + + Method (_STA, 0, NotSerialized) { + Return (0x0F) + } + + Name (_CRS, ResourceTemplate() + { + FixedIO (0x60, 0x01) + FixedIO (0x64, 0x01) + IRQNoFlags () {1} + }) + + Name (_PRS, ResourceTemplate() + { + StartDependentFn (0, 0) { + FixedIO (0x60, 0x01) + FixedIO (0x64, 0x01) + IRQNoFlags () {1} + } + EndDependentFn () + }) + } +#endif +} diff --git a/src/ec/google/chromeec/chip.h b/src/ec/google/chromeec/chip.h new file mode 100644 index 0000000..0ca2183 --- /dev/null +++ b/src/ec/google/chromeec/chip.h @@ -0,0 +1,32 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef EC_GOOGLE_CHROMEEC_CHIP_H +#define EC_GOOGLE_CHROMEEC_CHIP_H + +#include <device/device.h> +#include <pc80/keyboard.h> + +extern struct chip_operations ec_google_chromeec_ops; + +struct ec_google_chromeec_config { + struct pc_keyboard keyboard; +}; + +#endif diff --git a/src/ec/google/chromeec/ec.c b/src/ec/google/chromeec/ec.c new file mode 100644 index 0000000..4057f2a --- /dev/null +++ b/src/ec/google/chromeec/ec.c @@ -0,0 +1,519 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <console/console.h> +#include <arch/io.h> +#include <delay.h> + +#ifdef __PRE_RAM__ +#include <arch/romcc_io.h> +#else +#include <device/device.h> +#include <device/pnp.h> +#include <elog.h> +#include <stdlib.h> +#include <string.h> +#include <reset.h> +#include <arch/hlt.h> +#include "chip.h" +#endif +#include "ec.h" +#include "ec_commands.h" +#include <vendorcode/google/chromeos/chromeos.h> + +/* an internal API to send a command to the EC and wait for response. */ +struct chromeec_command { + u8 cmd_code; /* command code in, status out */ + u8 cmd_version; /* command version */ + const void* cmd_data_in; /* command data, if any */ + void* cmd_data_out; /* command response, if any */ + u16 cmd_size_in; /* size of command data */ + u16 cmd_size_out; /* expected size of command response in, + * actual received size out */ +}; + +static int google_chromeec_wait_ready(u16 port) +{ + u8 ec_status = inb(port); + u32 time_count = 0; + + /* + * One second is more than plenty for any EC operation to complete + * (and the bus accessing/code execution) overhead will make the + * timeout even longer. + */ +#define MAX_EC_TIMEOUT_US 1000000 + + while (ec_status & + (EC_LPC_CMDR_PENDING | EC_LPC_CMDR_BUSY)) { + udelay(1); + if (time_count++ == MAX_EC_TIMEOUT_US) + return -1; + ec_status = inb(port); + } + return 0; +} + +static int google_chromeec_cmd_args_supported(void) +{ + if (inb(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID) == 'E' && + inb(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID + 1) == 'C' && + (inb(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_HOST_CMD_FLAGS) & + EC_HOST_CMD_FLAG_LPC_ARGS_SUPPORTED)) + return 1; + + return 0; +} + +static int google_chromeec_command_old(struct chromeec_command *cec_command) +{ + int i; + + if (cec_command->cmd_version) { + printk(BIOS_ERR, "Invalid version for command protocol!\n"); + return 1; + } + + if (google_chromeec_wait_ready(EC_LPC_ADDR_HOST_CMD)) { + printk(BIOS_ERR, "Timeout waiting for EC ready!\n"); + return 1; + } + + /* Copy command data, if any. */ + for (i = 0; i < cec_command->cmd_size_in; i++) + outb(((char*)cec_command->cmd_data_in)[i], + EC_LPC_ADDR_OLD_PARAM + i); + + /* Issue the command. */ + outb(cec_command->cmd_code, EC_LPC_ADDR_HOST_CMD); + + if (google_chromeec_wait_ready(EC_LPC_ADDR_HOST_CMD)) { + printk(BIOS_ERR, "Timeout waiting for EC process command %d!\n", + cec_command->cmd_code); + return 1; + } + + for (i = 0; i < cec_command->cmd_size_out; i++) + ((char*)cec_command->cmd_data_out)[i] = + inb(EC_LPC_ADDR_OLD_PARAM + i); + cec_command->cmd_code = inb(EC_LPC_ADDR_HOST_DATA); + return 0; +} + +static int google_chromeec_command(struct chromeec_command *cec_command) +{ + struct ec_lpc_host_args args; + const u8 *d; + u8 *dout; + u8 cmd_code = cec_command->cmd_code; + int csum; + int i; + + /* Fall back to old command protocol if necessary */ + if (!google_chromeec_cmd_args_supported()) + return google_chromeec_command_old(cec_command); + + /* Fill in args */ + args.flags = EC_HOST_ARGS_FLAG_FROM_HOST; + args.command_version = cec_command->cmd_version; + args.data_size = cec_command->cmd_size_in; + + /* Initialize checksum */ + csum = cmd_code + args.flags + args.command_version + args.data_size; + + /* Write data and update checksum */ + for (i = 0, d = (const u8 *)cec_command->cmd_data_in; + i < cec_command->cmd_size_in; i++, d++) { + outb(*d, EC_LPC_ADDR_HOST_PARAM + i); + csum += *d; + } + + /* Finalize checksum and write args */ + args.checksum = (u8)csum; + for (i = 0, d = (const u8 *)&args; i < sizeof(args); i++, d++) + outb(*d, EC_LPC_ADDR_HOST_ARGS + i); + + + /* Issue the command */ + outb(cmd_code, EC_LPC_ADDR_HOST_CMD); + + if (google_chromeec_wait_ready(EC_LPC_ADDR_HOST_CMD)) { + printk(BIOS_ERR, "Timeout waiting for EC process command %d!\n", + cec_command->cmd_code); + return 1; + } + + /* Check result */ + cec_command->cmd_code = inb(EC_LPC_ADDR_HOST_DATA); + if (cec_command->cmd_code) + return 1; + + /* Read back args */ + for (i = 0, dout = (u8 *)&args; i < sizeof(args); i++, dout++) + *dout = inb(EC_LPC_ADDR_HOST_ARGS + i); + + /* + * If EC didn't modify args flags, then somehow we sent a new-style + * command to an old EC, which means it would have read its params + * from the wrong place. + */ + if (!(args.flags & EC_HOST_ARGS_FLAG_TO_HOST)) { + printk(BIOS_ERR, "EC protocol mismatch\n"); + return 1; + } + + if (args.data_size > cec_command->cmd_size_out) { + printk(BIOS_ERR, "EC returned too much data\n"); + return 1; + } + cec_command->cmd_size_out = args.data_size; + + /* Start calculating response checksum */ + csum = cmd_code + args.flags + args.command_version + args.data_size; + + /* Read data, if any */ + for (i = 0, dout = (u8 *)cec_command->cmd_data_out; + i < args.data_size; i++, dout++) { + *dout = inb(EC_LPC_ADDR_HOST_PARAM + i); + csum += *dout; + } + + /* Verify checksum */ + if (args.checksum != (u8)csum) { + printk(BIOS_ERR, "EC response has invalid checksum\n"); + return 1; + } + + return 0; +} + +int google_chromeec_kbbacklight(int percent) +{ + struct chromeec_command cec_cmd; + struct ec_params_pwm_set_keyboard_backlight cmd_backlight; + struct ec_response_pwm_get_keyboard_backlight rsp_backlight; + /* if they were dumb, help them out */ + percent = percent % 101; + cec_cmd.cmd_code = EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT; + cec_cmd.cmd_version = 0; + cmd_backlight.percent = percent; + cec_cmd.cmd_data_in = &cmd_backlight; + cec_cmd.cmd_data_out = &rsp_backlight; + cec_cmd.cmd_size_in = sizeof(cmd_backlight); + cec_cmd.cmd_size_out = sizeof(rsp_backlight); + google_chromeec_command(&cec_cmd); + printk(BIOS_DEBUG, "Google Chrome set keyboard backlight: %x status (%x)\n", + rsp_backlight.percent, cec_cmd.cmd_code); + return cec_cmd.cmd_code; + +} + +void google_chromeec_post(u8 postcode) +{ + /* backlight is a percent. postcode is a u8. + * Convert the u8 to %. + */ + postcode = (postcode/4) + (postcode/8); + google_chromeec_kbbacklight(postcode); +} + +/* + * Query the EC for specified mask indicating enabled events. + * The EC maintains separate event masks for SMI, SCI and WAKE. + */ +static u32 google_chromeec_get_mask(u8 type) +{ + struct ec_params_host_event_mask req; + struct ec_response_host_event_mask rsp; + struct chromeec_command cmd; + + cmd.cmd_code = type; + cmd.cmd_version = 0; + cmd.cmd_data_in = &req; + cmd.cmd_size_in = sizeof(req); + cmd.cmd_data_out = &rsp; + cmd.cmd_size_out = sizeof(rsp); + + if (google_chromeec_command(&cmd) == 0) + return rsp.mask; + return 0; +} + +u32 google_chromeec_get_events_b(void) +{ + return google_chromeec_get_mask(EC_CMD_HOST_EVENT_GET_B); +} + +#ifndef __PRE_RAM__ + +static int google_chromeec_set_mask(u8 type, u32 mask) +{ + struct ec_params_host_event_mask req; + struct ec_response_host_event_mask rsp; + struct chromeec_command cmd; + + req.mask = mask; + cmd.cmd_code = type; + cmd.cmd_version = 0; + cmd.cmd_data_in = &req; + cmd.cmd_size_in = sizeof(req); + cmd.cmd_data_out = &rsp; + cmd.cmd_size_out = sizeof(rsp); + + return google_chromeec_command(&cmd); +} + +int google_chromeec_set_sci_mask(u32 mask) +{ + printk(BIOS_DEBUG, "Chrome EC: Set SCI mask to 0x%08x\n", mask); + return google_chromeec_set_mask( + EC_CMD_HOST_EVENT_SET_SCI_MASK, mask); +} + +int google_chromeec_set_smi_mask(u32 mask) +{ + printk(BIOS_DEBUG, "Chrome EC: Set SMI mask to 0x%08x\n", mask); + return google_chromeec_set_mask( + EC_CMD_HOST_EVENT_SET_SMI_MASK, mask); +} + +int google_chromeec_set_wake_mask(u32 mask) +{ + printk(BIOS_DEBUG, "Chrome EC: Set WAKE mask to 0x%08x\n", mask); + return google_chromeec_set_mask( + EC_CMD_HOST_EVENT_SET_WAKE_MASK, mask); +} + +u32 google_chromeec_get_wake_mask(void) +{ + return google_chromeec_get_mask( + EC_CMD_HOST_EVENT_GET_WAKE_MASK); +} + +#if CONFIG_ELOG +/* Find the last port80 code from the previous boot */ +static u16 google_chromeec_get_port80_last_boot(void) +{ + struct ec_response_port80_last_boot rsp; + struct chromeec_command cmd = { + .cmd_code = EC_CMD_PORT80_LAST_BOOT, + .cmd_data_out = &rsp, + .cmd_size_out = sizeof(rsp), + }; + + /* Get last port80 code */ + if (google_chromeec_command(&cmd) == 0) + return rsp.code; + + return 0; +} +#endif + +void google_chromeec_log_events(u32 mask) +{ +#if CONFIG_ELOG + u8 event; + u16 code; + + /* Find the last port80 code */ + code = google_chromeec_get_port80_last_boot(); + + /* Log the last post code only if it is abornmal */ + if (code > 0 && code != POST_OS_BOOT && code != POST_OS_RESUME) + printk(BIOS_DEBUG, "Chrome EC: Last POST code was 0x%02x\n", + code); + + while ((event = google_chromeec_get_event()) != 0) { + if (EC_HOST_EVENT_MASK(event) & mask) + elog_add_event_byte(ELOG_TYPE_EC_EVENT, event); + } +#endif +} + +u8 google_chromeec_get_event(void) +{ + if (google_chromeec_wait_ready(EC_LPC_ADDR_ACPI_CMD)) { + printk(BIOS_ERR, "Timeout waiting for EC ready!\n"); + return 1; + } + + /* Issue the ACPI query-event command */ + outb(EC_CMD_ACPI_QUERY_EVENT, EC_LPC_ADDR_ACPI_CMD); + + if (google_chromeec_wait_ready(EC_LPC_ADDR_ACPI_CMD)) { + printk(BIOS_ERR, "Timeout waiting for EC QUERY_EVENT!\n"); + return 0; + } + + /* Event (or 0 if none) is returned directly in the data byte */ + return inb(EC_LPC_ADDR_ACPI_DATA); +} + +u16 google_chromeec_get_board_version(void) +{ + struct chromeec_command cmd; + struct ec_response_board_version board_v; + + cmd.cmd_code = EC_CMD_GET_BOARD_VERSION; + cmd.cmd_version = 0; + cmd.cmd_size_in = 0; + cmd.cmd_size_out = sizeof(board_v); + cmd.cmd_data_out = &board_v; + + if (google_chromeec_command(&cmd) != 0) + return 0; + + return board_v.board_version; +} + +int google_chromeec_set_usb_charge_mode(u8 port_id, enum usb_charge_mode mode) +{ + struct chromeec_command cmd; + struct ec_params_usb_charge_set_mode set_mode = { + .usb_port_id = port_id, + .mode = mode, + }; + + cmd.cmd_code = EC_CMD_USB_CHARGE_SET_MODE; + cmd.cmd_version = 0; + cmd.cmd_size_in = sizeof(set_mode); + cmd.cmd_data_in = &set_mode; + cmd.cmd_size_out = 0; + cmd.cmd_data_out = NULL; + + return google_chromeec_command(&cmd); +} + +#ifndef __SMM__ + +static +int google_chromeec_hello(void) +{ + struct chromeec_command cec_cmd; + struct ec_params_hello cmd_hello; + struct ec_response_hello rsp_hello; + cmd_hello.in_data = 0x10203040; + cec_cmd.cmd_code = EC_CMD_HELLO; + cec_cmd.cmd_version = 0; + cec_cmd.cmd_data_in = &cmd_hello.in_data; + cec_cmd.cmd_data_out = &rsp_hello.out_data; + cec_cmd.cmd_size_in = sizeof(cmd_hello.in_data); + cec_cmd.cmd_size_out = sizeof(rsp_hello.out_data); + google_chromeec_command(&cec_cmd); + printk(BIOS_DEBUG, "Google Chrome EC: Hello got back %x status (%x)\n", + rsp_hello.out_data, cec_cmd.cmd_code); + return cec_cmd.cmd_code; +} + +static int ec_image_type; /* Cached EC image type (ro or rw). */ + +static void google_chromeec_init(device_t dev) +{ + struct chromeec_command cec_cmd; + struct ec_google_chromeec_config *conf = dev->chip_info; + struct ec_response_get_version lpcv_cmd; + + if (!dev->enabled) + return; + + printk(BIOS_DEBUG, "Google Chrome EC: Initializing keyboard.\n"); + pc_keyboard_init(&conf->keyboard); + + google_chromeec_hello(); + + memset(&lpcv_cmd, 0, sizeof(lpcv_cmd)); + cec_cmd.cmd_code = EC_CMD_GET_VERSION; + cec_cmd.cmd_version = 0; + cec_cmd.cmd_data_out = &lpcv_cmd; + cec_cmd.cmd_size_in = 0; + cec_cmd.cmd_size_out = sizeof(lpcv_cmd); + google_chromeec_command(&cec_cmd); + + if (cec_cmd.cmd_code) { + printk(BIOS_DEBUG, + "Google Chrome EC: version command failed!\n"); + } else { + printk(BIOS_DEBUG, "Google Chrome EC: version:\n"); + printk(BIOS_DEBUG, " ro: %s\n", lpcv_cmd.version_string_ro); + printk(BIOS_DEBUG, " rw: %s\n", lpcv_cmd.version_string_rw); + printk(BIOS_DEBUG, " running image: %d\n", + lpcv_cmd.current_image); + ec_image_type = lpcv_cmd.current_image; + } + + if (cec_cmd.cmd_code || + (recovery_mode_enabled() && + (lpcv_cmd.current_image != EC_IMAGE_RO))) { + struct ec_params_reboot_ec reboot_ec; + /* Reboot the EC and make it come back in RO mode */ + reboot_ec.cmd = EC_REBOOT_COLD; + reboot_ec.flags = 0; + cec_cmd.cmd_code = EC_CMD_REBOOT_EC; + cec_cmd.cmd_version = 0; + cec_cmd.cmd_data_in = &reboot_ec; + cec_cmd.cmd_size_in = sizeof(reboot_ec); + cec_cmd.cmd_size_out = 0; /* ignore response, if any */ + printk(BIOS_DEBUG, "Rebooting with EC in RO mode:\n"); + google_chromeec_command(&cec_cmd); + udelay(1000); + hard_reset(); + hlt(); + } + +} + +static void google_chromeec_read_resources(device_t dev) +{ + /* Nothing, but this function avoids an error on serial console. */ +} + +static void google_chromeec_enable_resources(device_t dev) +{ + /* Nothing, but this function avoids an error on serial console. */ +} + +static struct device_operations ops = { + .init = google_chromeec_init, + .read_resources = google_chromeec_read_resources, + .enable_resources = google_chromeec_enable_resources +}; + +static struct pnp_info pnp_dev_info[] = { + { &ops, 0, 0, { 0, 0 }, } +}; + +static void enable_dev(device_t dev) +{ + pnp_enable_devices(dev, &pnp_ops, ARRAY_SIZE(pnp_dev_info), + pnp_dev_info); +} + +struct chip_operations ec_google_chromeec_ops = { + CHIP_NAME("Google Chrome EC") + .enable_dev = enable_dev, +}; + +int google_ec_running_ro(void) +{ + return (ec_image_type == EC_IMAGE_RO); +} +#endif /* ! __SMM__ */ + +#endif /* ! __PRE_RAM__ */ diff --git a/src/ec/google/chromeec/ec.h b/src/ec/google/chromeec/ec.h new file mode 100644 index 0000000..f056d26 --- /dev/null +++ b/src/ec/google/chromeec/ec.h @@ -0,0 +1,49 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Mailbox EC communication interface for Google Chrome Embedded Controller. + */ + +#ifndef _EC_GOOGLE_CHROMEEC_EC_H +#define _EC_GOOGLE_CHROMEEC_EC_H + +#ifndef __PRE_RAM__ +u32 google_chromeec_get_wake_mask(void); +int google_chromeec_set_sci_mask(u32 mask); +int google_chromeec_set_smi_mask(u32 mask); +int google_chromeec_set_wake_mask(u32 mask); +u8 google_chromeec_get_event(void); +int google_ec_running_ro(void); +u16 google_chromeec_get_board_version(void); +#endif + +u32 google_chromeec_get_events_b(void); +int google_chromeec_kbbacklight(int percent); +void google_chromeec_post(u8 postcode); +void google_chromeec_log_events(u32 mask); + +enum usb_charge_mode { + USB_CHARGE_MODE_DISABLED, + USB_CHARGE_MODE_CHARGE_AUTO, + USB_CHARGE_MODE_CHARGE_BC12, + USB_CHARGE_MODE_DOWNSTREAM_500MA, + USB_CHARGE_MODE_DOWNSTREAM_1500MA, +}; +int google_chromeec_set_usb_charge_mode(u8 port_id, enum usb_charge_mode mode); + +#endif /* _EC_GOOGLE_CHROMEEC_EC_H */ diff --git a/src/ec/google/chromeec/ec_commands.h b/src/ec/google/chromeec/ec_commands.h new file mode 100644 index 0000000..c1b19bc --- /dev/null +++ b/src/ec/google/chromeec/ec_commands.h @@ -0,0 +1,1069 @@ +/* Copyright (c) 2012 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/* Host communication command constants for Chrome EC */ + +#ifndef __CROS_EC_COMMANDS_H +#define __CROS_EC_COMMANDS_H + +/* + * Protocol overview + * + * request: CMD [ P0 P1 P2 ... Pn S ] + * response: ERR [ P0 P1 P2 ... Pn S ] + * + * where the bytes are defined as follow : + * - CMD is the command code. (defined by EC_CMD_ constants) + * - ERR is the error code. (defined by EC_RES_ constants) + * - Px is the optional payload. + * it is not sent if the error code is not success. + * (defined by ec_params_ and ec_response_ structures) + * - S is the checksum which is the sum of all payload bytes. + * + * On LPC, CMD and ERR are sent/received at EC_LPC_ADDR_KERNEL|USER_CMD + * and the payloads are sent/received at EC_LPC_ADDR_KERNEL|USER_PARAM. + * On I2C, all bytes are sent serially in the same message. + */ + +/* Current version of this protocol */ +#define EC_PROTO_VERSION 0x00000002 + +/* Command version mask */ +#define EC_VER_MASK(version) (1UL << (version)) + +/* I/O addresses for ACPI commands */ +#define EC_LPC_ADDR_ACPI_DATA 0x62 +#define EC_LPC_ADDR_ACPI_CMD 0x66 + +/* I/O addresses for host command */ +#define EC_LPC_ADDR_HOST_DATA 0x200 +#define EC_LPC_ADDR_HOST_CMD 0x204 + +/* I/O addresses for host command args and params */ +#define EC_LPC_ADDR_HOST_ARGS 0x800 +#define EC_LPC_ADDR_HOST_PARAM 0x804 +#define EC_HOST_PARAM_SIZE 0x0fc /* Size of param area in bytes */ + +/* I/O addresses for host command params, old interface */ +#define EC_LPC_ADDR_OLD_PARAM 0x880 +#define EC_OLD_PARAM_SIZE 0x080 /* Size of param area in bytes */ + +/* EC command register bit functions */ +#define EC_LPC_CMDR_DATA (1 << 0) /* Data ready for host to read */ +#define EC_LPC_CMDR_PENDING (1 << 1) /* Write pending to EC */ +#define EC_LPC_CMDR_BUSY (1 << 2) /* EC is busy processing a command */ +#define EC_LPC_CMDR_CMD (1 << 3) /* Last host write was a command */ +#define EC_LPC_CMDR_ACPI_BRST (1 << 4) /* Burst mode (not used) */ +#define EC_LPC_CMDR_SCI (1 << 5) /* SCI event is pending */ +#define EC_LPC_CMDR_SMI (1 << 6) /* SMI event is pending */ + +#define EC_LPC_ADDR_MEMMAP 0x900 +#define EC_MEMMAP_SIZE 255 /* ACPI IO buffer max is 255 bytes */ +#define EC_MEMMAP_TEXT_MAX 8 /* Size of a string in the memory map */ + +/* The offset address of each type of data in mapped memory. */ +#define EC_MEMMAP_TEMP_SENSOR 0x00 /* Temp sensors */ +#define EC_MEMMAP_FAN 0x10 /* Fan speeds */ +#define EC_MEMMAP_TEMP_SENSOR_B 0x18 /* Temp sensors (second set) */ +#define EC_MEMMAP_ID 0x20 /* 'E' 'C' */ +#define EC_MEMMAP_ID_VERSION 0x22 /* Version of data in 0x20 - 0x2f */ +#define EC_MEMMAP_THERMAL_VERSION 0x23 /* Version of data in 0x00 - 0x1f */ +#define EC_MEMMAP_BATTERY_VERSION 0x24 /* Version of data in 0x40 - 0x7f */ +#define EC_MEMMAP_SWITCHES_VERSION 0x25 /* Version of data in 0x30 - 0x33 */ +#define EC_MEMMAP_EVENTS_VERSION 0x26 /* Version of data in 0x34 - 0x3f */ +#define EC_MEMMAP_HOST_CMD_FLAGS 0x27 /* Host command interface flags */ +#define EC_MEMMAP_SWITCHES 0x30 +#define EC_MEMMAP_HOST_EVENTS 0x34 +#define EC_MEMMAP_BATT_VOLT 0x40 /* Battery Present Voltage */ +#define EC_MEMMAP_BATT_RATE 0x44 /* Battery Present Rate */ +#define EC_MEMMAP_BATT_CAP 0x48 /* Battery Remaining Capacity */ +#define EC_MEMMAP_BATT_FLAG 0x4c /* Battery State, defined below */ +#define EC_MEMMAP_BATT_DCAP 0x50 /* Battery Design Capacity */ +#define EC_MEMMAP_BATT_DVLT 0x54 /* Battery Design Voltage */ +#define EC_MEMMAP_BATT_LFCC 0x58 /* Battery Last Full Charge Capacity */ +#define EC_MEMMAP_BATT_CCNT 0x5c /* Battery Cycle Count */ +#define EC_MEMMAP_BATT_MFGR 0x60 /* Battery Manufacturer String */ +#define EC_MEMMAP_BATT_MODEL 0x68 /* Battery Model Number String */ +#define EC_MEMMAP_BATT_SERIAL 0x70 /* Battery Serial Number String */ +#define EC_MEMMAP_BATT_TYPE 0x78 /* Battery Type String */ + +/* Number of temp sensors at EC_MEMMAP_TEMP_SENSOR */ +#define EC_TEMP_SENSOR_ENTRIES 16 +/* + * Number of temp sensors at EC_MEMMAP_TEMP_SENSOR_B. + * + * Valid only if EC_MEMMAP_THERMAL_VERSION returns >= 2. + */ +#define EC_TEMP_SENSOR_B_ENTRIES 8 +#define EC_TEMP_SENSOR_NOT_PRESENT 0xff +#define EC_TEMP_SENSOR_ERROR 0xfe +#define EC_TEMP_SENSOR_NOT_POWERED 0xfd +/* + * The offset of temperature value stored in mapped memory. This allows + * reporting a temperature range of 200K to 454K = -73C to 181C. + */ +#define EC_TEMP_SENSOR_OFFSET 200 + +#define EC_FAN_SPEED_ENTRIES 4 /* Number of fans at EC_MEMMAP_FAN */ +#define EC_FAN_SPEED_NOT_PRESENT 0xffff /* Entry not present */ +#define EC_FAN_SPEED_STALLED 0xfffe /* Fan stalled */ + +/* Battery bit flags at EC_MEMMAP_BATT_FLAG. */ +#define EC_BATT_FLAG_AC_PRESENT 0x01 +#define EC_BATT_FLAG_BATT_PRESENT 0x02 +#define EC_BATT_FLAG_DISCHARGING 0x04 +#define EC_BATT_FLAG_CHARGING 0x08 +#define EC_BATT_FLAG_LEVEL_CRITICAL 0x10 + +/* Switch flags at EC_MEMMAP_SWITCHES */ +#define EC_SWITCH_LID_OPEN 0x01 +#define EC_SWITCH_POWER_BUTTON_PRESSED 0x02 +#define EC_SWITCH_WRITE_PROTECT_DISABLED 0x04 +/* Recovery requested via keyboard */ +#define EC_SWITCH_KEYBOARD_RECOVERY 0x08 +/* Recovery requested via dedicated signal (from servo board) */ +#define EC_SWITCH_DEDICATED_RECOVERY 0x10 +/* Was fake developer mode switch; now unused. Remove in next refactor. */ +#define EC_SWITCH_IGNORE0 0x20 + +/* Host command interface flags */ +/* Host command interface supports LPC args (LPC interface only) */ +#define EC_HOST_CMD_FLAG_LPC_ARGS_SUPPORTED 0x01 + +/* Wireless switch flags */ +#define EC_WIRELESS_SWITCH_WLAN 0x01 +#define EC_WIRELESS_SWITCH_BLUETOOTH 0x02 + +/* + * This header file is used in coreboot both in C and ACPI code. The ACPI code + * is pre-processed to handle constants but the ASL compiler is unable to + * handle actual C code so keep it separate. + */ +#ifndef __ACPI__ + +/* + * Define __packed if someone hasn't beat us to it. Linux kernel style + * checking prefers __packed over __attribute__((packed)). + */ +#ifndef __packed +#define __packed __attribute__((packed)) +#endif + +/* LPC command status byte masks */ +/* EC has written a byte in the data register and host hasn't read it yet */ +#define EC_LPC_STATUS_TO_HOST 0x01 +/* Host has written a command/data byte and the EC hasn't read it yet */ +#define EC_LPC_STATUS_FROM_HOST 0x02 +/* EC is processing a command */ +#define EC_LPC_STATUS_PROCESSING 0x04 +/* Last write to EC was a command, not data */ +#define EC_LPC_STATUS_LAST_CMD 0x08 +/* EC is in burst mode. Unsupported by Chrome EC, so this bit is never set */ +#define EC_LPC_STATUS_BURST_MODE 0x10 +/* SCI event is pending (requesting SCI query) */ +#define EC_LPC_STATUS_SCI_PENDING 0x20 +/* SMI event is pending (requesting SMI query) */ +#define EC_LPC_STATUS_SMI_PENDING 0x40 +/* (reserved) */ +#define EC_LPC_STATUS_RESERVED 0x80 + +/* + * EC is busy. This covers both the EC processing a command, and the host has + * written a new command but the EC hasn't picked it up yet. + */ +#define EC_LPC_STATUS_BUSY_MASK \ + (EC_LPC_STATUS_FROM_HOST | EC_LPC_STATUS_PROCESSING) + +/* Host command response codes */ +enum ec_status { + EC_RES_SUCCESS = 0, + EC_RES_INVALID_COMMAND = 1, + EC_RES_ERROR = 2, + EC_RES_INVALID_PARAM = 3, + EC_RES_ACCESS_DENIED = 4, + EC_RES_INVALID_RESPONSE = 5, + EC_RES_INVALID_VERSION = 6, + EC_RES_INVALID_CHECKSUM = 7, +}; + +/* + * Host event codes. Note these are 1-based, not 0-based, because ACPI query + * EC command uses code 0 to mean "no event pending". We explicitly specify + * each value in the enum listing so they won't change if we delete/insert an + * item or rearrange the list (it needs to be stable across platforms, not + * just within a single compiled instance). + */ +enum host_event_code { + EC_HOST_EVENT_LID_CLOSED = 1, + EC_HOST_EVENT_LID_OPEN = 2, + EC_HOST_EVENT_POWER_BUTTON = 3, + EC_HOST_EVENT_AC_CONNECTED = 4, + EC_HOST_EVENT_AC_DISCONNECTED = 5, + EC_HOST_EVENT_BATTERY_LOW = 6, + EC_HOST_EVENT_BATTERY_CRITICAL = 7, + EC_HOST_EVENT_BATTERY = 8, + EC_HOST_EVENT_THERMAL_THRESHOLD = 9, + EC_HOST_EVENT_THERMAL_OVERLOAD = 10, + EC_HOST_EVENT_THERMAL = 11, + EC_HOST_EVENT_USB_CHARGER = 12, + EC_HOST_EVENT_KEY_PRESSED = 13, + /* + * EC has finished initializing the host interface. The host can check + * for this event following sending a EC_CMD_REBOOT_EC command to + * determine when the EC is ready to accept subsequent commands. + */ + EC_HOST_EVENT_INTERFACE_READY = 14, + /* Keyboard recovery combo has been pressed */ + EC_HOST_EVENT_KEYBOARD_RECOVERY = 15, + + /* Shutdown due to thermal overload */ + EC_HOST_EVENT_THERMAL_SHUTDOWN = 16, + /* Shutdown due to battery level too low */ + EC_HOST_EVENT_BATTERY_SHUTDOWN = 17, + + /* + * The high bit of the event mask is not used as a host event code. If + * it reads back as set, then the entire event mask should be + * considered invalid by the host. This can happen when reading the + * raw event status via EC_MEMMAP_HOST_EVENTS but the LPC interface is + * not initialized on the EC, or improperly configured on the host. + */ + EC_HOST_EVENT_INVALID = 32 +}; +/* Host event mask */ +#define EC_HOST_EVENT_MASK(event_code) (1UL << ((event_code) - 1)) + +/* Arguments at EC_LPC_ADDR_HOST_ARGS */ +struct ec_lpc_host_args { + uint8_t flags; + uint8_t command_version; + uint8_t data_size; + /* + * Checksum; sum of command + flags + command_version + data_size + + * all params/response data bytes. + */ + uint8_t checksum; +} __packed; + +/* Flags for ec_lpc_host_args.flags */ +/* + * Args are from host. Data area at EC_LPC_ADDR_HOST_PARAM contains command + * params. + * + * If EC gets a command and this flag is not set, this is an old-style command. + * Command version is 0 and params from host are at EC_LPC_ADDR_OLD_PARAM with + * unknown length. EC must respond with an old-style response (that is, + * withouth setting EC_HOST_ARGS_FLAG_TO_HOST). + */ +#define EC_HOST_ARGS_FLAG_FROM_HOST 0x01 +/* + * Args are from EC. Data area at EC_LPC_ADDR_HOST_PARAM contains response. + * + * If EC responds to a command and this flag is not set, this is an old-style + * response. Command version is 0 and response data from EC is at + * EC_LPC_ADDR_OLD_PARAM with unknown length. + */ +#define EC_HOST_ARGS_FLAG_TO_HOST 0x02 + +/* + * Notes on commands: + * + * Each command is an 8-byte command value. Commands which take params or + * return response data specify structs for that data. If no struct is + * specified, the command does not input or output data, respectively. + * Parameter/response length is implicit in the structs. Some underlying + * communication protocols (I2C, SPI) may add length or checksum headers, but + * those are implementation-dependent and not defined here. + */ + +/*****************************************************************************/ +/* General / test commands */ + +/* + * Get protocol version, used to deal with non-backward compatible protocol + * changes. + */ +#define EC_CMD_PROTO_VERSION 0x00 + +struct ec_response_proto_version { + uint32_t version; +} __packed; + +/* + * Hello. This is a simple command to test the EC is responsive to + * commands. + */ +#define EC_CMD_HELLO 0x01 + +struct ec_params_hello { + uint32_t in_data; /* Pass anything here */ +} __packed; + +struct ec_response_hello { + uint32_t out_data; /* Output will be in_data + 0x01020304 */ +} __packed; + +/* Get version number */ +#define EC_CMD_GET_VERSION 0x02 + +enum ec_current_image { + EC_IMAGE_UNKNOWN = 0, + EC_IMAGE_RO, + EC_IMAGE_RW +}; + +struct ec_response_get_version { + /* Null-terminated version strings for RO, RW */ + char version_string_ro[32]; + char version_string_rw[32]; + char reserved[32]; /* Was previously RW-B string */ + uint32_t current_image; /* One of ec_current_image */ +} __packed; + +/* Read test */ +#define EC_CMD_READ_TEST 0x03 + +struct ec_params_read_test { + uint32_t offset; /* Starting value for read buffer */ + uint32_t size; /* Size to read in bytes */ +} __packed; + +struct ec_response_read_test { + uint32_t data[32]; +} __packed; + +/* + * Get build information + * + * Response is null-terminated string. + */ +#define EC_CMD_GET_BUILD_INFO 0x04 + +/* Get chip info */ +#define EC_CMD_GET_CHIP_INFO 0x05 + +struct ec_response_get_chip_info { + /* Null-terminated strings */ + char vendor[32]; + char name[32]; + char revision[32]; /* Mask version */ +} __packed; + +/* Get board HW version */ +#define EC_CMD_GET_BOARD_VERSION 0x06 + +struct ec_response_board_version { + uint16_t board_version; /* A monotonously incrementing number. */ +} __packed; + +/* + * Read memory-mapped data. + * + * This is an alternate interface to memory-mapped data for bus protocols + * which don't support direct-mapped memory - I2C, SPI, etc. + * + * Response is params.size bytes of data. + */ +#define EC_CMD_READ_MEMMAP 0x07 + +struct ec_params_read_memmap { + uint8_t offset; /* Offset in memmap (EC_MEMMAP_*) */ + uint8_t size; /* Size to read in bytes */ +} __packed; + +/* Read versions supported for a command */ +#define EC_CMD_GET_CMD_VERSIONS 0x08 + +struct ec_params_get_cmd_versions { + uint8_t cmd; /* Command to check */ +} __packed; + +struct ec_response_get_cmd_versions { + /* + * Mask of supported versions; use EC_VER_MASK() to compare with a + * desired version. + */ + uint32_t version_mask; +} __packed; + +/*****************************************************************************/ +/* Flash commands */ + +/* Get flash info */ +#define EC_CMD_FLASH_INFO 0x10 + +struct ec_response_flash_info { + /* Usable flash size, in bytes */ + uint32_t flash_size; + /* + * Write block size. Write offset and size must be a multiple + * of this. + */ + uint32_t write_block_size; + /* + * Erase block size. Erase offset and size must be a multiple + * of this. + */ + uint32_t erase_block_size; + /* + * Protection block size. Protection offset and size must be a + * multiple of this. + */ + uint32_t protect_block_size; +} __packed; + +/* + * Read flash + * + * Response is params.size bytes of data. + */ +#define EC_CMD_FLASH_READ 0x11 + +struct ec_params_flash_read { + uint32_t offset; /* Byte offset to read */ + uint32_t size; /* Size to read in bytes */ +} __packed; + +/* Write flash */ +#define EC_CMD_FLASH_WRITE 0x12 + +struct ec_params_flash_write { + uint32_t offset; /* Byte offset to write */ + uint32_t size; /* Size to write in bytes */ + /* + * Data to write. Could really use EC_PARAM_SIZE - 8, but tidiest to + * use a power of 2 so writes stay aligned. + */ + uint8_t data[64]; +} __packed; + +/* Erase flash */ +#define EC_CMD_FLASH_ERASE 0x13 + +struct ec_params_flash_erase { + uint32_t offset; /* Byte offset to erase */ + uint32_t size; /* Size to erase in bytes */ +} __packed; + +/* + * Get/set flash protection. + * + * If mask!=0, sets/clear the requested bits of flags. Depending on the + * firmware write protect GPIO, not all flags will take effect immediately; + * some flags require a subsequent hard reset to take effect. Check the + * returned flags bits to see what actually happened. + * + * If mask=0, simply returns the current flags state. + */ +#define EC_CMD_FLASH_PROTECT 0x15 +#define EC_VER_FLASH_PROTECT 1 /* Command version 1 */ + +/* Flags for flash protection */ +/* RO flash code protected when the EC boots */ +#define EC_FLASH_PROTECT_RO_AT_BOOT (1 << 0) +/* + * RO flash code protected now. If this bit is set, at-boot status cannot + * be changed. + */ +#define EC_FLASH_PROTECT_RO_NOW (1 << 1) +/* RW flash code protected now, until reboot. */ +#define EC_FLASH_PROTECT_RW_NOW (1 << 2) +/* Flash write protect GPIO is asserted now */ +#define EC_FLASH_PROTECT_GPIO_ASSERTED (1 << 3) +/* Error - at least one bank of flash is stuck locked, and cannot be unlocked */ +#define EC_FLASH_PROTECT_ERROR_STUCK (1 << 4) +/* + * Error - flash protection is in inconsistent state. At least one bank of + * flash which should be protected is not protected. Usually fixed by + * re-requesting the desired flags, or by a hard reset if that fails. + */ +#define EC_FLASH_PROTECT_ERROR_INCONSISTENT (1 << 5) +/* RW flash code protected when the EC boots */ +#define EC_FLASH_PROTECT_RW_AT_BOOT (1 << 6) + +struct ec_params_flash_protect { + uint32_t mask; /* Bits in flags to apply */ + uint32_t flags; /* New flags to apply */ +} __packed; + +struct ec_response_flash_protect { + /* Current value of flash protect flags */ + uint32_t flags; + /* + * Flags which are valid on this platform. This allows the caller + * to distinguish between flags which aren't set vs. flags which can't + * be set on this platform. + */ + uint32_t valid_flags; + /* Flags which can be changed given the current protection state */ + uint32_t writable_flags; +} __packed; + +/* + * Note: commands 0x14 - 0x19 version 0 were old commands to get/set flash + * write protect. These commands may be reused with version > 0. + */ + +/* Get the region offset/size */ +#define EC_CMD_FLASH_REGION_INFO 0x16 +#define EC_VER_FLASH_REGION_INFO 1 + +enum ec_flash_region { + /* Region which holds read-only EC image */ + EC_FLASH_REGION_RO, + /* Region which holds rewritable EC image */ + EC_FLASH_REGION_RW, + /* + * Region which should be write-protected in the factory (a superset of + * EC_FLASH_REGION_RO) + */ + EC_FLASH_REGION_WP_RO, +}; + +struct ec_params_flash_region_info { + uint32_t region; /* enum ec_flash_region */ +} __packed; + +struct ec_response_flash_region_info { + uint32_t offset; + uint32_t size; +} __packed; + + +/*****************************************************************************/ +/* PWM commands */ + +/* Get fan target RPM */ +#define EC_CMD_PWM_GET_FAN_TARGET_RPM 0x20 + +struct ec_response_pwm_get_fan_rpm { + uint32_t rpm; +} __packed; + +/* Set target fan RPM */ +#define EC_CMD_PWM_SET_FAN_TARGET_RPM 0x21 + +struct ec_params_pwm_set_fan_target_rpm { + uint32_t rpm; +} __packed; + +/* Get keyboard backlight */ +#define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x22 + +struct ec_response_pwm_get_keyboard_backlight { + uint8_t percent; + uint8_t enabled; +} __packed; + +/* Set keyboard backlight */ +#define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x23 + +struct ec_params_pwm_set_keyboard_backlight { + uint8_t percent; +} __packed; + +/* Set target fan PWM duty cycle */ +#define EC_CMD_PWM_SET_FAN_DUTY 0x24 + +struct ec_params_pwm_set_fan_duty { + uint32_t percent; +} __packed; + +/*****************************************************************************/ +/* + * Lightbar commands. This looks worse than it is. Since we only use one LPC + * command to say "talk to the lightbar", we put the "and tell it to do X" part + * into a subcommand. We'll make separate structs for subcommands with + * different input args, so that we know how much to expect. + */ +#define EC_CMD_LIGHTBAR_CMD 0x28 + +struct ec_params_lightbar_cmd { + union { + union { + uint8_t cmd; + struct { + uint8_t cmd; + } dump, off, on, init, get_seq; + struct num { + uint8_t cmd; + uint8_t num; + } brightness, seq; + + struct reg { + uint8_t cmd; + uint8_t ctrl, reg, value; + } reg; + struct rgb { + uint8_t cmd; + uint8_t led, red, green, blue; + } rgb; + } in; + union { + struct dump { + struct { + uint8_t reg; + uint8_t ic0; + uint8_t ic1; + } vals[23]; + } dump; + struct get_seq { + uint8_t num; + } get_seq; + struct { + /* no return params */ + } off, on, init, brightness, seq, reg, rgb; + } out; + }; +} __packed; + +/*****************************************************************************/ +/* Verified boot commands */ + +/* + * Note: command code 0x29 version 0 was VBOOT_CMD in Link EVT; it may be + * reused for other purposes with version > 0. + */ + +/* Verified boot hash command */ +#define EC_CMD_VBOOT_HASH 0x2A + +struct ec_params_vboot_hash { + uint8_t cmd; /* enum ec_vboot_hash_cmd */ + uint8_t hash_type; /* enum ec_vboot_hash_type */ + uint8_t nonce_size; /* Nonce size; may be 0 */ + uint8_t reserved0; /* Reserved; set 0 */ + uint32_t offset; /* Offset in flash to hash */ + uint32_t size; /* Number of bytes to hash */ + uint8_t nonce_data[64]; /* Nonce data; ignored if nonce_size=0 */ +} __packed; + +struct ec_response_vboot_hash { + uint8_t status; /* enum ec_vboot_hash_status */ + uint8_t hash_type; /* enum ec_vboot_hash_type */ + uint8_t digest_size; /* Size of hash digest in bytes */ + uint8_t reserved0; /* Ignore; will be 0 */ + uint32_t offset; /* Offset in flash which was hashed */ + uint32_t size; /* Number of bytes hashed */ + uint8_t hash_digest[64]; /* Hash digest data */ +} __packed; + +enum ec_vboot_hash_cmd { + EC_VBOOT_HASH_GET, /* Get current hash status */ + EC_VBOOT_HASH_ABORT, /* Abort calculating current hash */ + EC_VBOOT_HASH_START, /* Start computing a new hash */ + EC_VBOOT_HASH_RECALC, /* Synchronously compute a new hash */ +}; + +enum ec_vboot_hash_type { + EC_VBOOT_HASH_TYPE_SHA256, /* SHA-256 */ +}; + +enum ec_vboot_hash_status { + EC_VBOOT_HASH_STATUS_NONE, /* No hash (not started, or aborted) */ + EC_VBOOT_HASH_STATUS_DONE, /* Finished computing a hash */ + EC_VBOOT_HASH_STATUS_BUSY, /* Busy computing a hash */ +}; + +/*****************************************************************************/ +/* USB charging control commands */ + +/* Set USB port charging mode */ +#define EC_CMD_USB_CHARGE_SET_MODE 0x30 + +struct ec_params_usb_charge_set_mode { + uint8_t usb_port_id; + uint8_t mode; +} __packed; + +/*****************************************************************************/ +/* Persistent storage for host */ + +/* Maximum bytes that can be read/written in a single command */ +#define EC_PSTORE_SIZE_MAX 64 + +/* Get persistent storage info */ +#define EC_CMD_PSTORE_INFO 0x40 + +struct ec_response_pstore_info { + /* Persistent storage size, in bytes */ + uint32_t pstore_size; + /* Access size; read/write offset and size must be a multiple of this */ + uint32_t access_size; +} __packed; + +/* + * Read persistent storage + * + * Response is params.size bytes of data. + */ +#define EC_CMD_PSTORE_READ 0x41 + +struct ec_params_pstore_read { + uint32_t offset; /* Byte offset to read */ + uint32_t size; /* Size to read in bytes */ +} __packed; + +/* Write persistent storage */ +#define EC_CMD_PSTORE_WRITE 0x42 + +struct ec_params_pstore_write { + uint32_t offset; /* Byte offset to write */ + uint32_t size; /* Size to write in bytes */ + uint8_t data[EC_PSTORE_SIZE_MAX]; +} __packed; + +/*****************************************************************************/ +/* Real-time clock */ + +/* RTC params and response structures */ +struct ec_params_rtc { + uint32_t time; +} __packed; + +struct ec_response_rtc { + uint32_t time; +} __packed; + +/* These use ec_response_rtc */ +#define EC_CMD_RTC_GET_VALUE 0x44 +#define EC_CMD_RTC_GET_ALARM 0x45 + +/* These all use ec_params_rtc */ +#define EC_CMD_RTC_SET_VALUE 0x46 +#define EC_CMD_RTC_SET_ALARM 0x47 + +/*****************************************************************************/ +/* Port80 log access */ + +/* Get last port80 code from previous boot */ +#define EC_CMD_PORT80_LAST_BOOT 0x48 + +struct ec_response_port80_last_boot { + uint16_t code; +} __packed; + +/*****************************************************************************/ +/* Thermal engine commands */ + +/* Set thershold value */ +#define EC_CMD_THERMAL_SET_THRESHOLD 0x50 + +struct ec_params_thermal_set_threshold { + uint8_t sensor_type; + uint8_t threshold_id; + uint16_t value; +} __packed; + +/* Get threshold value */ +#define EC_CMD_THERMAL_GET_THRESHOLD 0x51 + +struct ec_params_thermal_get_threshold { + uint8_t sensor_type; + uint8_t threshold_id; +} __packed; + +struct ec_response_thermal_get_threshold { + uint16_t value; +} __packed; + +/* Toggle automatic fan control */ +#define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x52 + +/*****************************************************************************/ +/* MKBP - Matrix KeyBoard Protocol */ + +/* + * Read key state + * + * Returns raw data for keyboard cols; see ec_response_mkbp_info.cols for + * expected response size. + */ +#define EC_CMD_MKBP_STATE 0x60 + +/* Provide information about the matrix : number of rows and columns */ +#define EC_CMD_MKBP_INFO 0x61 + +struct ec_response_mkbp_info { + uint32_t rows; + uint32_t cols; + uint8_t switches; +} __packed; + +/* Simulate key press */ +#define EC_CMD_MKBP_SIMULATE_KEY 0x62 + +struct ec_params_mkbp_simulate_key { + uint8_t col; + uint8_t row; + uint8_t pressed; +} __packed; + +/*****************************************************************************/ +/* Temperature sensor commands */ + +/* Read temperature sensor info */ +#define EC_CMD_TEMP_SENSOR_GET_INFO 0x70 + +struct ec_params_temp_sensor_get_info { + uint8_t id; +} __packed; + +struct ec_response_temp_sensor_get_info { + char sensor_name[32]; + uint8_t sensor_type; +} __packed; + +/*****************************************************************************/ + +/* + * Note: host commands 0x80 - 0x87 are reserved to avoid conflict with ACPI + * commands accidentally sent to the wrong interface. See the ACPI section + * below. + */ + +/*****************************************************************************/ +/* Host event commands */ + +/* + * Host event mask params and response structures, shared by all of the host + * event commands below. + */ +struct ec_params_host_event_mask { + uint32_t mask; +} __packed; + +struct ec_response_host_event_mask { + uint32_t mask; +} __packed; + +/* These all use ec_response_host_event_mask */ +#define EC_CMD_HOST_EVENT_GET_B 0x87 +#define EC_CMD_HOST_EVENT_GET_SMI_MASK 0x88 +#define EC_CMD_HOST_EVENT_GET_SCI_MASK 0x89 +#define EC_CMD_HOST_EVENT_GET_WAKE_MASK 0x8d + +/* These all use ec_params_host_event_mask */ +#define EC_CMD_HOST_EVENT_SET_SMI_MASK 0x8a +#define EC_CMD_HOST_EVENT_SET_SCI_MASK 0x8b +#define EC_CMD_HOST_EVENT_CLEAR 0x8c +#define EC_CMD_HOST_EVENT_SET_WAKE_MASK 0x8e +#define EC_CMD_HOST_EVENT_CLEAR_B 0x8f + +/*****************************************************************************/ +/* Switch commands */ + +/* Enable/disable LCD backlight */ +#define EC_CMD_SWITCH_ENABLE_BKLIGHT 0x90 + +struct ec_params_switch_enable_backlight { + uint8_t enabled; +} __packed; + +/* Enable/disable WLAN/Bluetooth */ +#define EC_CMD_SWITCH_ENABLE_WIRELESS 0x91 + +struct ec_params_switch_enable_wireless { + uint8_t enabled; +} __packed; + +/*****************************************************************************/ +/* GPIO commands. Only available on EC if write protect has been disabled. */ + +/* Set GPIO output value */ +#define EC_CMD_GPIO_SET 0x92 + +struct ec_params_gpio_set { + char name[32]; + uint8_t val; +} __packed; + +/* Get GPIO value */ +#define EC_CMD_GPIO_GET 0x93 + +struct ec_params_gpio_get { + char name[32]; +} __packed; +struct ec_response_gpio_get { + uint8_t val; +} __packed; + +/*****************************************************************************/ +/* I2C commands. Only available when flash write protect is unlocked. */ + +/* Read I2C bus */ +#define EC_CMD_I2C_READ 0x94 + +struct ec_params_i2c_read { + uint16_t addr; + uint8_t read_size; /* Either 8 or 16. */ + uint8_t port; + uint8_t offset; +} __packed; +struct ec_response_i2c_read { + uint16_t data; +} __packed; + +/* Write I2C bus */ +#define EC_CMD_I2C_WRITE 0x95 + +struct ec_params_i2c_write { + uint16_t data; + uint16_t addr; + uint8_t write_size; /* Either 8 or 16. */ + uint8_t port; + uint8_t offset; +} __packed; + +/*****************************************************************************/ +/* Charge state commands. Only available when flash write protect unlocked. */ + +/* Force charge state machine to stop in idle mode */ +#define EC_CMD_CHARGE_FORCE_IDLE 0x96 + +struct ec_params_force_idle { + uint8_t enabled; +} __packed; + +/*****************************************************************************/ +/* Console commands. Only available when flash write protect is unlocked. */ + +/* Snapshot console output buffer for use by EC_CMD_CONSOLE_READ. */ +#define EC_CMD_CONSOLE_SNAPSHOT 0x97 + +/* + * Read next chunk of data from saved snapshot. + * + * Response is null-terminated string. Empty string, if there is no more + * remaining output. + */ +#define EC_CMD_CONSOLE_READ 0x98 + +/*****************************************************************************/ +/* System commands */ + +/* + * TODO: this is a confusing name, since it doesn't necessarily reboot the EC. + * Rename to "set image" or something similar. + */ +#define EC_CMD_REBOOT_EC 0xd2 + +/* Command */ +enum ec_reboot_cmd { + EC_REBOOT_CANCEL = 0, /* Cancel a pending reboot */ + EC_REBOOT_JUMP_RO, /* Jump to RO without rebooting */ + EC_REBOOT_JUMP_RW, /* Jump to RW without rebooting */ + /* (command 3 was jump to RW-B) */ + EC_REBOOT_COLD = 4, /* Cold-reboot */ + EC_REBOOT_DISABLE_JUMP, /* Disable jump until next reboot */ +}; + +/* Flags for ec_params_reboot_ec.reboot_flags */ +#define EC_REBOOT_FLAG_RESERVED0 (1 << 0) /* Was recovery request */ +#define EC_REBOOT_FLAG_ON_AP_SHUTDOWN (1 << 1) +#define EC_REBOOT_FLAG_POWER_ON (1 << 2) + +struct ec_params_reboot_ec { + uint8_t cmd; /* enum ec_reboot_cmd */ + uint8_t flags; /* See EC_REBOOT_FLAG_* */ +} __packed; + +/*****************************************************************************/ +/* + * ACPI commands + * + * These are valid ONLY on the ACPI command/data port. + */ + +/* + * ACPI Read Embedded Controller + * + * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*). + * + * Use the following sequence: + * + * - Write EC_CMD_ACPI_READ to EC_LPC_ADDR_ACPI_CMD + * - Wait for EC_LPC_CMDR_PENDING bit to clear + * - Write address to EC_LPC_ADDR_ACPI_DATA + * - Wait for EC_LPC_CMDR_DATA bit to set + * - Read value from EC_LPC_ADDR_ACPI_DATA + */ +#define EC_CMD_ACPI_READ 0x80 + +/* + * ACPI Write Embedded Controller + * + * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*). + * + * Use the following sequence: + * + * - Write EC_CMD_ACPI_WRITE to EC_LPC_ADDR_ACPI_CMD + * - Wait for EC_LPC_CMDR_PENDING bit to clear + * - Write address to EC_LPC_ADDR_ACPI_DATA + * - Wait for EC_LPC_CMDR_PENDING bit to clear + * - Write value to EC_LPC_ADDR_ACPI_DATA + */ +#define EC_CMD_ACPI_WRITE 0x81 + +/* + * ACPI Query Embedded Controller + * + * This clears the lowest-order bit in the currently pending host events, and + * sets the result code to the 1-based index of the bit (event 0x00000001 = 1, + * event 0x80000000 = 32), or 0 if no event was pending. + */ +#define EC_CMD_ACPI_QUERY_EVENT 0x84 + +/* Valid addresses in ACPI memory space, for read/write commands */ +/* Memory space version; set to EC_ACPI_MEM_VERSION_CURRENT */ +#define EC_ACPI_MEM_VERSION 0x00 +/* + * Test location; writing value here updates test compliment byte to (0xff - + * value). + */ +#define EC_ACPI_MEM_TEST 0x01 +/* Test compliment; writes here are ignored. */ +#define EC_ACPI_MEM_TEST_COMPLIMENT 0x02 +/* Keyboard backlight brightness percent (0 - 100) */ +#define EC_ACPI_MEM_KEYBOARD_BACKLIGHT 0x03 + +/* Current version of ACPI memory address space */ +#define EC_ACPI_MEM_VERSION_CURRENT 1 + + +/*****************************************************************************/ +/* + * Special commands + * + * These do not follow the normal rules for commands. See each command for + * details. + */ + +/* + * Reboot NOW + * + * This command will work even when the EC LPC interface is busy, because the + * reboot command is processed at interrupt level. Note that when the EC + * reboots, the host will reboot too, so there is no response to this command. + * + * Use EC_CMD_REBOOT_EC to reboot the EC more politely. + */ +#define EC_CMD_REBOOT 0xd1 /* Think "die" */ + +/* + * This header byte on a command indicate version 0. Any header byte less + * than this means that we are talking to an old EC which doesn't support + * versioning. In that case, we assume version 0. + * + * Header bytes greater than this indicate a later version. For example, + * EC_CMD_VERSION0 + 1 means we are using version 1. + * + * The old EC interface must not use commands 0dc or higher. + */ +#define EC_CMD_VERSION0 0xdc + +#endif /* !__ACPI__ */ + +#endif /* __CROS_EC_COMMANDS_H */
Stefan Reinauer wrote:
+++ b/src/ec/google/chromeec/ec.c
..
+/* an internal API to send a command to the EC and wait for response. */ +struct chromeec_command {
- u8 cmd_code; /* command code in, status out */
- u8 cmd_version; /* command version */
- const void* cmd_data_in; /* command data, if any */
- void* cmd_data_out; /* command response, if any */
- u16 cmd_size_in; /* size of command data */
- u16 cmd_size_out; /* expected size of command response in,
* actual received size out */+};
No need for __packed since the struct only goes to lower layer code which packs the actual command?
+int google_chromeec_kbbacklight(int percent) +{
- struct chromeec_command cec_cmd;
- struct ec_params_pwm_set_keyboard_backlight cmd_backlight;
- struct ec_response_pwm_get_keyboard_backlight rsp_backlight;
- /* if they were dumb, help them out */
- percent = percent % 101;
Please:
percent = MAX(percent, 0); percent = MIN(percent, 100);
The first one can of course be skipped if the parameter is unsigned.
+void google_chromeec_post(u8 postcode) +{
- /* backlight is a percent. postcode is a u8.
* Convert the u8 to %.*/- postcode = (postcode/4) + (postcode/8);
- google_chromeec_kbbacklight(postcode);
+}
Cute.
+u32 google_chromeec_get_events_b(void) +{
- return google_chromeec_get_mask(EC_CMD_HOST_EVENT_GET_B);
+}
What's "b" ? That's seriously undescriptive. From ACPI?
+static +int google_chromeec_hello(void) +{
- struct chromeec_command cec_cmd;
- struct ec_params_hello cmd_hello;
- struct ec_response_hello rsp_hello;
- cmd_hello.in_data = 0x10203040;
- cec_cmd.cmd_code = EC_CMD_HELLO;
- cec_cmd.cmd_version = 0;
- cec_cmd.cmd_data_in = &cmd_hello.in_data;
- cec_cmd.cmd_data_out = &rsp_hello.out_data;
- cec_cmd.cmd_size_in = sizeof(cmd_hello.in_data);
- cec_cmd.cmd_size_out = sizeof(rsp_hello.out_data);
Statically initializing the struct would look a little nicer:
struct chromeec_command cec_cmd = { .cmd_code = EC_CMD_HELLO, .cmd_version = 0, ... };
+static void google_chromeec_init(device_t dev) +{
..
- if (cec_cmd.cmd_code ||
(recovery_mode_enabled() &&(lpcv_cmd.current_image != EC_IMAGE_RO))) {struct ec_params_reboot_ec reboot_ec;/* Reboot the EC and make it come back in RO mode */reboot_ec.cmd = EC_REBOOT_COLD;reboot_ec.flags = 0;cec_cmd.cmd_code = EC_CMD_REBOOT_EC;cec_cmd.cmd_version = 0;cec_cmd.cmd_data_in = &reboot_ec;cec_cmd.cmd_size_in = sizeof(reboot_ec);cec_cmd.cmd_size_out = 0; /* ignore response, if any */printk(BIOS_DEBUG, "Rebooting with EC in RO mode:\n");google_chromeec_command(&cec_cmd);udelay(1000);hard_reset();hlt();- }
+}
How about die() at the end instead of hlt()? I believe hlt returns.
All in all, lovely work! I guess you had lots of fun while debugging.
//Peter
-
Peter Stuge -
Stefan Reinauer