Re: [coreboot] Booting issue --AMD Olive Hill plus mainboard

[Idwer Vollering]

2017-04-24 21:08 GMT+02:00 Nagabhushan Shastry :
> Hi,
>
> I am trying to bring up the AMD G series Olive hill plus mainboard with
> coreboot.
>
> These are the options i have enabled in make menuconfig but I am not able
> to see anything on the screen when i power on the board.
> Could someone please let me know if I am missing something.
>
> • General / Use CMOS for configuration values = enable (CMOS defaults are
> located in your boards directory src/mainboard/OEM/MODEL/cmos.default)
> • General / Include the coreboot .config file into the ROM image
> • General / Compress ramstage with LZMA
> • Mainboard / Mainboard vendor = AMD
> • Mainboard / Mainboard model = Olive Hill plus
> • Mainboard / ROM chip size = 8 MB
> • Chipset / Include CPU microcode in CBFS = Do not include microcode updates
> (NOTE: you probably want to enable it on some systems)
> • Chipset / Enable Hudson XHCI Controller
> • Chipset / Add xhci firmware
> • (3rdparty/blobs/southbridge/amd/avalon/xhci.bin) XHCI firmware path and
> filename
>  (3rdparty/blobs/southbridge/amd/avalon/PSP/AmdPubKey.bin) AMD public Key
> • Devices /  Run VGA Option ROMs
> • Devices /   Add a VGA BIOS image
>  (3rdparty/blobs/northbridge/amd/00730F01/VBIOS.bin) VGA BIOS path and
> filename
>  (1002,9850) VGA device PCI IDs

These PCI IDs, are they correct? Is the VBIOS, which I don't know
anything about, executed? You need to have a way to see console
output, either using the board's serial port or - presuming the
mainboard boots to linux - through the utility found in util/cbmem/
> • Display / Keep VESA framebuffer = disable (disable for text-mode graphics,
> enable for coreboot vesa framebuffer)
> • Generic Drivers / Serial port on SuperIO
> • Generic Drivers / Support Intel PCI-e WiFi adapters
> • Console / Squelch AP CPUs from early console.
> • Console / Serial port console output
> • Console / Use onboard VGA as primary video device
> • Console / Send console output to a CBMEM buffer
> • Console / Send POST codes to an external device
> • Console /  Send POST codes to an IO port
> • System tables /  [*] Generate an MP table
> • System tables /  [*] Generate a PIRQ table
> • System tables /  [*] Generate SMBIOS tables
> • Payload  /        SeaBIOS version (1.10.2)  --->
> • Payload  /        Use LZMA compression for payloads