答复: 答复: 答复: Which kernel for framebuffering?

[YhLu]

Are your changes in CVS server?

You need to enable CONFIG_BTEXT_CONSOLE

-----邮件原件-----
发件人: Li-Ta Lo [mailto:[e-mail]] 
发送时间: 2004年5月6日 14:52
收件人: YhLu
抄送: Hendricks David W.; LinuxBIOS
主题: Re: 答复: 答复: Which kernel for framebuffering?

On Thu, 2004-05-06 at 15:59, YhLu wrote:
> So the IBM MB does't work again? 
> Can not get output in CRT or sth?

When I checked with David yesterday, it didn't.
There is nothing on the screen even for FILO.
I think it is due to different HT topology.

Ollie
> YH
>
> -----邮件原件-----
> 发件人: Li-Ta Lo [mailto:[e-mail]] 
> 发送时间: 2004年5月6日 14:46
> 收件人: YhLu
> 抄送: Hendricks David W.; LinuxBIOS
> 主题: Re: 答复: Which kernel for framebuffering?
>
> On Wed, 2004-05-05 at 13:39, YhLu wrote:
>
> did you do anything with the LDT/Resource for VGA Card ? We have problem
> on the IBM/e325 which has different HT topology with hdama.
>
> Ollie
> > Worked nicely :) The keyboard worked at FILO, but did not work after the
> > kernel booted. It didn't even show IRQ 1 in /proc/interrupts. Weird, but

I
> > guess that's another matter. I'm just very, very happy to see Linux boot
> > into a console I can see on a real monitor :)
> >
> > On Tue, 4 May 2004, YhLu wrote:
> > > David,
> > >
> > > Please refer to the patch for 2.4.22 and 2.6.5, or you can put that in
>
> CVS
> > > ...
> > >
> > > Also please refer to the matix to see which kernel you want to use.
> > >
> > > Please make sure enable ati xl framebuffer only in kernel config. (
>
> don't
> > > enable noinit)
> > >
> > > Regards
> > >
> > > YH