Thanks a lot for your advice. I'm finding correct blobs for KBL U. I'll update once I get result.
2018-01-07 22:05 GMT+07:00 Naresh G. Solanki email@example.com :
Hi Toan Le,
For Sasby Island, which is based on KBL U, you'll need corresponding blobs(me descriptor & ucode). Use kblrvp7 as starting point. And based on schematic(of Sasby Island) & your requirement(interface/device), you may have change settings(like gpio, devicetree.cb etc).
Make sure you are using right config & blobs. For this you can get in touch with Intel FAE.
Regards, Naresh G Solanki
On Jan 6, 2018 7:45 AM, "Toan Le manh" firstname.lastname@example.org wrote:
Thanks a lot for your reply. Could you please advise which settings should be modified for sasby island?
2018-01-06 2:33 GMT+07:00 Naresh G. Solanki <email@example.com
I guess you have coreboot working on rvp11.
You may have to modify few settings based on sasby island.
On Jan 4, 2018 7:58 AM, "Toan Le manh" firstname.lastname@example.org wrote:
I had a Intel Sasby Island kit, which has CPU family: SkyLake, model i7-6600U, Memory: LPDDR4. Do you think coreboot for Intel rvp11 (Kabylake U, LPDDR4) can work on that Sasby Island kit?
Thanks & BRs, Toan Le
-- coreboot mailing list: email@example.com https://mail.coreboot.org/mailman/listinfo/coreboot