Re: [coreboot] Can coreboot for KabyLake rvp11 work on Intel Sasby Island kit?

[Toan Le manh]

Dear Naresh,

Thanks a lot for your advice. I'm finding correct blobs for KBL U. I'll
update once I get result.

2018-01-07 22:05 GMT+07:00 Naresh G. Solanki 
:
> Hi Toan Le,
>
> For Sasby Island, which is based on KBL U, you'll need corresponding
> blobs(me descriptor & ucode).
> Use kblrvp7 as starting point. And based on schematic(of Sasby Island) &
> your requirement(interface/device), you may have change settings(like gpio,
> devicetree.cb etc).
>
> Make sure you are using right config & blobs. For this you can get in
> touch with Intel FAE.
>
> Regards,
> Naresh G Solanki
>
> On Jan 6, 2018 7:45 AM, "Toan Le manh"  wrote:
>
> Hi Naresh,
>
> Thanks a lot for your reply.
> Could you please advise which settings should be modified for sasby island?
>
> Thanks.
>
> 2018-01-06 2:33 GMT+07:00 Naresh G. Solanki <[e-mail]
> > :
> > I guess you have coreboot working on rvp11.
> >
> > You may have to modify few settings based on sasby island.
> >
> > On Jan 4, 2018 7:58 AM, "Toan Le manh"  wrote:
> > > Hi,
> > >
> > > I had a Intel Sasby Island kit, which has CPU family: SkyLake, model
> > > i7-6600U, Memory: LPDDR4.
> > > Do you think coreboot for Intel rvp11 (Kabylake U, LPDDR4) can work on
> > > that Sasby Island kit?
> > >
> > > Thanks & BRs,
> > > Toan Le