Hi Toan Le,For Sasby Island, which is based on KBL U, you'll need corresponding blobs(me descriptor & ucode).Use kblrvp7 as starting point. And based on schematic(of Sasby Island) & your requirement(interface/device), you may have change settings(like gpio, devicetree.cb etc).Make sure you are using right config & blobs. For this you can get in touch with Intel FAE.Regards,Naresh G SolankiOn Jan 6, 2018 7:45 AM, "Toan Le manh" <lemanhtoantb@gmail.com> wrote:Hi Naresh,Thanks a lot for your reply.Could you please advise which settings should be modified for sasby island?Thanks.2018-01-06 2:33 GMT+07:00 Naresh G. Solanki <naresh.solanki.2011@gmail.com> :I guess you have coreboot working on rvp11.You may have to modify few settings based on sasby island.On Jan 4, 2018 7:58 AM, "Toan Le manh" <lemanhtoantb@gmail.com> wrote:--Hi,I had a Intel Sasby Island kit, which has CPU family: SkyLake, model i7-6600U, Memory: LPDDR4.Do you think coreboot for Intel rvp11 (Kabylake U, LPDDR4) can work on that Sasby Island kit?Thanks & BRs,Toan Le
coreboot mailing list: coreboot@coreboot.org
https://mail.coreboot.org/mailman/listinfo/coreboot