New patch to review for coreboot: 95240d0 LUMPY: Add information to generate MPTABLE from devicetree.cb

[Sven Schnelle]

Sven Schnelle ([e-mail]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1462

-gerrit

commit 95240d0c3a22d3323112941f24c8e381126daa94
Author: Sven Schnelle 
Date:   Mon Aug 20 11:21:00 2012 +0200

LUMPY: Add information to generate MPTABLE from devicetree.cb

Change-Id: If68888e87c5197328c59dafce1301eefe000e28e
    Signed-off-by: Sven Schnelle 
---
 src/mainboard/samsung/lumpy/devicetree.cb | 37 ++++++++++++++++++++++++++-----
 1 file changed, 31 insertions(+), 6 deletions(-)

diff --git a/src/mainboard/samsung/lumpy/devicetree.cb b/src/mainboard/samsung/lumpy/devicetree.cb
index 3e93df4..7a2ee6c 100644
--- a/src/mainboard/samsung/lumpy/devicetree.cb
+++ b/src/mainboard/samsung/lumpy/devicetree.cb
@@ -33,6 +33,10 @@ chip northbridge/intel/sandybridge
    end

device pci_domain 0 on
+		ioapic_irq 4 INTA 0x10
+		ioapic_irq 4 INTB 0x11
+		ioapic_irq 4 INTC 0x12
+		ioapic_irq 4 INTD 0x13
    	subsystemid 0x1ae0 0xc000 inherit
    	device pci 00.0 on end # host bridge
    	device pci 02.0 on end # vga controller
@@ -68,19 +72,28 @@ chip northbridge/intel/sandybridge
    		device pci 16.2 off end # Management Engine IDE-R
    		device pci 16.3 off end # Management Engine KT
    		device pci 19.0 off end # Intel Gigabit Ethernet
-			device pci 1a.0 on end # USB2 EHCI #2
-			device pci 1b.0 on end # High Definition Audio
+			device pci 1a.0 on # USB2 EHCI #2
+				ioapic_irq 4 INTA 0x11
+			end
+			device pci 1b.0 on # High Definition Audio
+				ioapic_irq 4 INTA 0x16
+			end
    		device pci 1c.0 on end # PCIe Port #1 (WLAN)
    		device pci 1c.1 off end # PCIe Port #2
    		device pci 1c.2 off end # PCIe Port #3
-			device pci 1c.3 on end # PCIe Port #4 (LAN)
+			device pci 1c.3 on # PCIe Port #4 (LAN)
+			#	ioapic_irq 4 INTA 0x13
+			end
    		device pci 1c.4 off end # PCIe Port #5
    		device pci 1c.5 off end # PCIe Port #6
    		device pci 1c.6 off end # PCIe Port #7
    		device pci 1c.7 off end # PCIe Port #8
-			device pci 1d.0 on end # USB2 EHCI #1
+			device pci 1d.0 on # USB2 EHCI #1
+				ioapic_irq 4 INTA 0x13
+			end
    		device pci 1e.0 off end # PCI bridge
    		device pci 1f.0 on # LPC bridge
+				ioapic_irq 4 INTA 0x10
    			chip superio/smsc/mec1308
    				device pnp 2e.1 on		# PM1
    					io 0x60 = 0xb00
@@ -102,9 +115,21 @@ chip northbridge/intel/sandybridge
    				register "mailbox_port" = "0xa00"
    				device pnp ff.1 off end
    			end
+
+				chip drivers/generic/ioapic
+				     register "have_isa_interrupts" = "1"
+				     register "irq_on_fsb" = "1"
+				     register "enable_virtual_wire" = "1"
+				     register "base" = "0xfec00000"
+				     device ioapic 4 on end
+				end
+			end
+			device pci 1f.2 on # SATA Controller 1
+				ioapic_irq 4 INTA 0x10
+			end
+			device pci 1f.3 on # SMBus
+				ioapic_irq 4 INTC 0x17
    		end
-			device pci 1f.2 on end # SATA Controller 1
-			device pci 1f.3 on end # SMBus
    		device pci 1f.5 off end # SATA Controller 2
    		device pci 1f.6 on end # Thermal
    	end