See patch.
agree, actually the vga will show nothing about the booting message, it's too fast. Acked-by: QingPei Wangwangqingpei@gmail.com
Best wishes Wang Qing Pei Phone: 86+18930528086
On Mon, Nov 22, 2010 at 3:35 PM, Stefan Reinauer < stefan.reinauer@coresystems.de> wrote:
See patch.
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
But there would be nothing on the screen if no payload is attached. That would be confusing when the board is still in debug stage.
Zheng
________________________________
From: coreboot-bounces+zheng.bao=amd.com@coreboot.org [mailto:coreboot-bounces+zheng.bao=amd.com@coreboot.org] On Behalf Of Qing Pei Wang Sent: Monday, November 22, 2010 3:55 PM To: Stefan Reinauer Cc: Coreboot Subject: Re: [coreboot] [PATCH] drop vga console support.
agree, actually the vga will show nothing about the booting message, it's too fast.
Acked-by: QingPei Wangwangqingpei@gmail.com
Best wishes
Wang Qing Pei Phone: 86+18930528086
On Mon, Nov 22, 2010 at 3:35 PM, Stefan Reinauer stefan.reinauer@coresystems.de wrote:
See patch.
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
* Bao, Zheng Zheng.Bao@amd.com [101122 09:02]:
But there would be nothing on the screen if no payload is attached. That would be confusing when the board is still in debug stage.
We might want to add an exception for this.
However, if the board is still in debug stage, a debug console (serial or usb debug) should be used as it is likely that the board dies much earlier than VGA output is available.
Stefan
On 11/21/10 11:55 PM, Qing Pei Wang wrote:
agree, actually the vga will show nothing about the booting message, it's too fast. Acked-by: QingPei Wang<wangqingpei@gmail.com mailto:wangqingpei@gmail.com>
Thanks, Qing Pei, committed as r6111!
Stefan
-
Bao, Zheng -
Qing Pei Wang -
Stefan Reinauer -
Stefan Reinauer