[v2] r4313 - in trunk/coreboot-v2/src/northbridge/via: . vx800 vx800/ddr2init vx800/ddr2init/vx800 vx800/examples
Author: uwe Date: 2009-05-27 15:12:42 +0200 (Wed, 27 May 2009) New Revision: 4313
Added: trunk/coreboot-v2/src/northbridge/via/vx800/ trunk/coreboot-v2/src/northbridge/via/vx800/Config.lb trunk/coreboot-v2/src/northbridge/via/vx800/DrivingClkPhaseData.h trunk/coreboot-v2/src/northbridge/via/vx800/chip.h trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/ trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/DramInit.c trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/DramInit.h trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/DramUtil.c trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/DramUtil.h trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/Translatorddr2init.c trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/ trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/ClkCtrl.c trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/DQSSearch.c trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/DRDY_BL.c trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/Detection.c trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/DevInit.c trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/DrivingSetting.c trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/FinalSetting.c trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/FreqSetting.c trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/RankMap.c trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/TimingSetting.c trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/UMARamSetting.c trunk/coreboot-v2/src/northbridge/via/vx800/examples/ trunk/coreboot-v2/src/northbridge/via/vx800/examples/DrivingClkPhaseData.c trunk/coreboot-v2/src/northbridge/via/vx800/examples/cache_as_ram_auto.c trunk/coreboot-v2/src/northbridge/via/vx800/examples/chipset_init.c trunk/coreboot-v2/src/northbridge/via/vx800/northbridge.c trunk/coreboot-v2/src/northbridge/via/vx800/northbridge.h trunk/coreboot-v2/src/northbridge/via/vx800/raminit.c trunk/coreboot-v2/src/northbridge/via/vx800/raminit.h trunk/coreboot-v2/src/northbridge/via/vx800/romstrap.inc trunk/coreboot-v2/src/northbridge/via/vx800/romstrap.lds trunk/coreboot-v2/src/northbridge/via/vx800/vga.c trunk/coreboot-v2/src/northbridge/via/vx800/vgabios.c trunk/coreboot-v2/src/northbridge/via/vx800/vgachip.h trunk/coreboot-v2/src/northbridge/via/vx800/vx800.h trunk/coreboot-v2/src/northbridge/via/vx800/vx800_early_serial.c trunk/coreboot-v2/src/northbridge/via/vx800/vx800_early_smbus.c trunk/coreboot-v2/src/northbridge/via/vx800/vx800_ide.c trunk/coreboot-v2/src/northbridge/via/vx800/vx800_lpc.c Log: Here's the VIA vx800 patch from OLPC.
It's untested, but a good starting point for everyone.
Signed-off-by: Bari Ari bari@onelabs.com Acked-by: Ronald G. Minnich rminnich@gmail.com Acked-by: Uwe Hermann uwe@hermann-uwe.de
Added: trunk/coreboot-v2/src/northbridge/via/vx800/Config.lb =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/Config.lb (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/Config.lb 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,25 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 One Laptop per Child, Association, Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +config chip.h +object vgabios.o +driver northbridge.o +driver vga.o +driver vx800_lpc.o +driver vx800_ide.o
Added: trunk/coreboot-v2/src/northbridge/via/vx800/DrivingClkPhaseData.h =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/DrivingClkPhaseData.h (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/DrivingClkPhaseData.h 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,70 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef DRIVINGCLKPHASEDATA_H +#define DRIVINGCLKPHASEDATA_H + +//extern u8 DDR2_DQSA_Driving_Table[4] ; +//extern u8 DDR2_DQSB_Driving_Table[2] ; + +//extern u8 DDR2_DQA_Driving_Table[4] ; +//extern u8 DDR2_DQB_Driving_Table[2] ; + +//extern u8 DDR2_CSA_Driving_Table_x8[4] ; +//extern u8 DDR2_CSB_Driving_Table_x8[2] ; +//extern u8 DDR2_CSA_Driving_Table_x16[4]; +//extern u8 DDR2_CSB_Driving_Table_x16[2]; + +#define MA_Table 3 +//extern u8 DDR2_MAA_Driving_Table[MA_Table][4]; +//extern u8 DDR2_MAB_Driving_Table[MA_Table][2]; + +//extern u8 DDR2_DCLKA_Driving_Table[4] ; +//extern u8 DDR2_DCLKB_Driving_Table[4]; + +#define DUTY_CYCLE_FREQ_NUM 6 +#define DUTY_CYCLE_REG_NUM 3 +//extern u8 ChA_Duty_Control_DDR2[DUTY_CYCLE_REG_NUM][DUTY_CYCLE_FREQ_NUM]; +//extern u8 ChB_Duty_Control_DDR2[DUTY_CYCLE_REG_NUM][DUTY_CYCLE_FREQ_NUM]; + +#define Clk_Phase_Table_DDR2_Width 6 +//extern u8 DDR2_ChA_Clk_Phase_Table_1R[3][Clk_Phase_Table_DDR2_Width]; +//extern u8 DDR2_ChB_Clk_Phase_Table_1R[3][Clk_Phase_Table_DDR2_Width]; +//extern u8 DDR2_ChA_Clk_Phase_Table_2R[3][Clk_Phase_Table_DDR2_Width]; + +#define WrtData_REG_NUM 4 +#define WrtData_FREQ_NUM 6 +//extern u8 DDR2_ChA_WrtData_Phase_Table[WrtData_REG_NUM ][WrtData_FREQ_NUM]; +//extern u8 DDR2_ChB_WrtData_Phase_Table[WrtData_REG_NUM ][WrtData_FREQ_NUM]; + +#define DQ_DQS_Delay_Table_Width 4 +//extern u8 DDR2_CHA_DQ_DQS_Delay_Table[4][DQ_DQS_Delay_Table_Width]; +//extern u8 DDR2_CHB_DQ_DQS_Delay_Table[4][DQ_DQS_Delay_Table_Width]; + +#define DQS_INPUT_CAPTURE_REG_NUM 3 +#define DQS_INPUT_CAPTURE_FREQ_NUM 6 +//extern u8 DDR2_ChA_DQS_Input_Capture_Tbl[DQS_INPUT_CAPTURE_REG_NUM ][DQS_INPUT_CAPTURE_FREQ_NUM]; +//extern u8 DDR2_ChB_DQS_Input_Capture_Tbl[DQS_INPUT_CAPTURE_REG_NUM ][DQS_INPUT_CAPTURE_FREQ_NUM]; + +//extern u8 Fixed_DQSA_1_2_Rank_Table[4][2]; +//extern u8 Fixed_DQSA_3_4_Rank_Table[4][2]; + +//extern u8 Fixed_DQSB_1_2_Rank_Table[4][2]; +//extern u8 Fixed_DQSB_3_4_Rank_Table[4][2]; +#endif /* DRIVINGCLKPHASEDATA_H */
Added: trunk/coreboot-v2/src/northbridge/via/vx800/chip.h =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/chip.h (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/chip.h 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,24 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +struct northbridge_via_vx800_config +{ +}; + +extern struct chip_operations northbridge_via_vx800_ops;
Added: trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/DramInit.c =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/DramInit.c (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/DramInit.c 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,86 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "lib/memset.c" +CB_STATUS DDR2_DRAM_INIT() +{ + CB_STATUS Status; + u8 i; + u32 RamSize; + BOOLEAN bTest; + DRAM_SYS_ATTR DramAttr; + + PRINT_DEBUG_MEM("DRAM_INIT \r"); + + memset(&DramAttr, 0, sizeof(DRAM_SYS_ATTR)); + /*Step1 DRAM Detection; DDR1 or DDR2; Get SPD Data; Rank Presence;64 or 128bit; Unbuffered or registered; 1T or 2T */ + DRAMDetect(&DramAttr); + + //Step2 set Frequency; calculate CL and Frequncy from SPD data; set the Frequency + DRAMFreqSetting(&DramAttr); + //Step3 Set DRAM Timing; CL, tRP, tRCD, tRAS, tRFC, tRRD, tWR, tWTR, tRTP + DRAMTimingSetting(&DramAttr); + //Step4 DRDY + DRAMDRDYSetting(&DramAttr); + //Step5 Burst length + DRAMBurstLength(&DramAttr); + //Step6 DRAM Driving Adjustment + DRAMDriving(&DramAttr); + //Step7 duty cycle control + DutyCycleCtrl(&DramAttr); + //Step8 DRAM clock phase and delay control + DRAMClkCtrl(&DramAttr); + //Step9 set register before init DRAM device + DRAMRegInitValue(&DramAttr); + //Step10 DDR and DDR2 initialize process + DRAMInitializeProc(&DramAttr); + + //Step13 Interleave function in rankmap.c + DRAMBankInterleave(&DramAttr); + //Step14 Sizing + DRAMSizingMATypeM(&DramAttr); + + //Step11 Search DQS and DQ output delay + DRAMDQSOutputSearch(&DramAttr); + //Step12 Search DQS input delay + DRAMDQSInputSearch(&DramAttr); + + //Step15 DDR fresh counter setting + DRAMRefreshCounter(&DramAttr); + //Step16 Final register setting for improve performance + DRAMRegFinalValue(&DramAttr); + + RamSize = 0; + for (i = 0; i < MAX_RANKS; i++) { + if (DramAttr.RankSize[i] == 0) { + continue; + } + RamSize += DramAttr.RankSize[i]; + } + PRINT_DEBUG_MEM("RamSize="); + PRINT_DEBUG_MEM_HEX32(RamSize); + PRINT_DEBUG_MEM("\r"); + DumpRegisters(0, 3); + //bTest = DramBaseTest( M1, RamSize - M1 * 2,SPARE, FALSE); + /* the memory can not correct work, this is because the user set the incorrect memory + parameter from setup interface.so we must set the boot mode to recovery mode, let + the system to reset and use the spd value to initialize the memory */ + SetUMARam(); + return CB_SUCCESS; +}
Added: trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/DramInit.h =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/DramInit.h (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/DramInit.h 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,263 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __DRAMINIT_H_ +#define __DRAMINIT_H_ + +//Dram Size +#define M (1024*1024) +#define M1 (1*M) +#define M64 (64*M) +#define M128 (128*M) +#define M256 (256*M) +#define M384 (384*M) +#define M512 (512*M) + +// UMA size +#define UMASIZE M64 + +#define ENABLE_CHC 0 //CHC enable, how ever, this CHC,used some reg define in CHB +#define ENABLE_CHB 0 //CHB enable , CHB is VX800's, VX855 no this CHB. +//Dram Freq +#define DIMMFREQ_800 400 +#define DIMMFREQ_667 333 +//#define DIMMFREQ_600 300 +#define DIMMFREQ_533 266 +#define DIMMFREQ_400 200 +#define DIMMFREQ_333 166 +#define DIMMFREQ_266 133 +#define DIMMFREQ_200 100 + +//Dram Type +#define RAMTYPE_FPMDRAM 1 +#define RAMTYPE_EDO 2 +#define RAMTYPE_PipelinedNibble 3 +#define RAMTYPE_SDRAM 4 +#define RAMTYPE_ROM 5 +#define RAMTYPE_SGRAMDDR 6 +#define RAMTYPE_SDRAMDDR 7 +#define RAMTYPE_SDRAMDDR2 8 + +/* CAS latency constant */ +#define CASLAN_15 15 +#define CASLAN_2 20 +#define CASLAN_25 25 +#define CASLAN_3 30 +#define CASLAN_35 35 +#define CASLAN_4 40 +#define CASLAN_45 45 +#define CASLAN_5 50 +#define CASLAN_NULL 00 + +//Burst length +#define BURSTLENGTH8 8 +#define BURSTLENGTH4 4 + +//Data Width +//#define DATAWIDTHX16 16 +//#define DATAWIDTHX8 8 +//#define DATAWIDTHX4 4 + + +#define SPD_MEMORY_TYPE 2 /*Memory type FPM,EDO,SDRAM,DDR,DDR2 */ +#define SPD_SDRAM_ROW_ADDR 3 /*Number of row addresses on this assembly */ +#define SPD_SDRAM_COL_ADDR 4 /*Number of column addresses on this assembly */ +#define SPD_SDRAM_DIMM_RANKS 5 /*Number of RANKS on this assembly */ +#define SPD_SDRAM_MOD_DATA_WIDTH 6 /*Data width of this assembly */ +#define SPD_SDRAM_TCLK_X 9 /*Cycle time at Maximum supported CAS latency (CL=X) */ +#define SPD_SDRAM_TAC_X 10 /*Access time for highest CL */ +#define SPD_SDRAM_CONFIG_TYPE 11 /*Non-parity , Parity or ECC */ +#define SPD_SDRAM_REFRESH 12 /*Refresh rate/type */ +#define SPD_SDRAM_WIDTH 13 /*Primary sdram width */ +#define SPD_SDRAM_MIN_CLK_DLY 15 /*Minimum clock delay */ +#define SPD_SDRAM_BURSTLENGTH 16 /*Burst Lengths supported */ +#define SPD_SDRAM_NO_OF_BANKS 17 /*Number of banks on this assembly */ +#define SPD_SDRAM_CAS_LATENCY 18 /*CAS latency */ +#define SPD_SDRAM_DIMM_TYPE_DDR2 20 /*DIMM type information; identifies the DDR2 memory module type */ +#define SPD_SDRAM_DEV_ATTR_DDR1 20 /*WE latency */ +#define SPD_SDRAM_MODULES_ATTR 21 /*This byte depicts various aspects of the modules; DDR DDR2 have different aspects */ +#define SPD_SDRAM_DEV_ATTR_GEN 22 /*General device attributes */ +#define SPD_SDRAM_TCLK_X_1 23 /*Minimum clock cycle time at Reduced CL, DDR: X-0.5 DDR2: X-1 */ +#define SPD_SDRAM_TAC_X_1 24 /*Maximum Data Access time from Clock at reduced CL,DDR: X-0.5 DDR2: X-1 */ +#define SPD_SDRAM_TCLK_X_2 25 /*Minimum clock cycle time at reduced CL, DDR: X-1 DDR2: X-2 */ +#define SPD_SDRAM_TAC_X_2 26 /*Maximum Data Access time from Clock at reduced CL, DDR: X-1 DDR2: X-2 */ +#define SPD_SDRAM_TRP 27 /*minimum row precharge time */ +#define SPD_SDRAM_TRRD 28 /*minimum row active to row active delay */ +#define SPD_SDRAM_TRCD 29 /*minimum RAS to CAS delay */ +#define SPD_SDRAM_TRAS 30 /*minimum active to precharge time */ +#define SPD_SDRAM_TWR 36 /*write recovery time, only DDR2 use it */ +#define SPD_SDRAM_TWTR 37 /*internal write to read command delay, only DDR2 use it */ +#define SPD_SDRAM_TRTP 38 /*internal read to prechange command delay, only DDR2 use it */ +#define SPD_SDRAM_TRFC2 40 /*extension of byte 41 tRC and byte 42 tRFC, only DDR2 use it */ +#define SPC_SDRAM_TRC 41 /*minimum active to active/refresh time */ +#define SPD_SDRAM_TRFC 42 /*minimum refresh to active / refresh command period */ + +#define SPD_DATA_SIZE 44 +//Dram cofig are +/*the most number of socket*/ +//#define MAX_RAM_SLOTS 2 +#define MAX_SOCKETS MAX_RAM_SLOTS +#define MAX_DIMMS MAX_SOCKETS /*every sockets can plug one DIMM */ +/*the most number of RANKs on a DIMM*/ +#define MAX_RANKS MAX_SOCKETS*2 + +struct mem_controller { + u8 channel0[MAX_DIMMS]; +}; + +static const struct mem_controller ctrl = { + .channel0 = {0x50, 0x51}, +}; + +typedef struct _DRAM_CONFIG_DATA { + u8 DramClk; + u8 DramTiming; + u8 CasLatency; + u8 BankIntlv; + u8 Trp; + u8 Tras; + u8 Trcd; + u8 Trfc; + u8 Trrd; + u8 Trtp; + u8 Twtr; + u8 Twr; + + u8 CmdRate; + u8 DualEn; + //u8 IntLv0; + //u8 IntLv1; + //u8 Ba0Sel; + //u8 Ba1Sel; + //u8 Ba2Sel; + u8 BaScmb; + u8 DrdyTiming; + //u8 Above4G; + //u8 RdsaitMode; + //u8 Rdsait; + //u8 TopPerf; + + u16 UMASize; +} DRAM_CONFIG_DATA; + +/*DIMM(assembly) information*/ +typedef struct _DIMM_INFO_tag { + u8 bPresence; + u8 SPDDataBuf[SPD_DATA_SIZE]; /*get all information from spd data */ +} DIMM_INFO; + +typedef struct _DRAM_SYS_ATTR_tag { + DIMM_INFO DimmInfo[MAX_DIMMS]; + + u8 RankPresentMap; /*bit0,1 Rank0,1 on DIMM0, bit2,3 Rank2,3 on DIMM1, + bit4,5 Rank4,5 on DIMM2, bit6,7 Rank6,7 on DIMM3 */ + u8 DimmNumChA; /*Dimm number */ + u8 DimmNumChB; + u8 RankNumChA; /*the number of Ranks on the mortherbaord */ + u8 RankNumChB; + u8 LoadNumChA; /*the number of chips on all DIMM */ + u8 LoadNumChB; + + u8 DramType; /*DDR1 or DDR2 */ + u16 DramFreq; + u16 DramCyc; /*10ns, 7.5ns, 6ns, 5ns, 3.75ns, 3ns, 2.5ns =1/SysFreq, unit: 100*ns. */ + + //u16 HFreq; /*100, 133, 166, 200, 266, 333, 400*/ + + u8 CL; /* CAS lantency */ + u8 CmdRate; /*1T or 2T */ + + u32 RankSize[MAX_RANKS]; + u8 Dual_Channel; + DRAM_CONFIG_DATA ConfigData; + u8 reserved[4]; + +} DRAM_SYS_ATTR; + +typedef struct _DRAM_SIZE_INFO { + u32 RankLength[MAX_RANKS]; +} DRAM_SIZE_INFO; + +//detection.c +/*Step1 detect DRAM type, Read SPD data,command rate*/ +CB_STATUS DRAMDetect(DRAM_SYS_ATTR * DramAttr); +//FreqSetting.c +/*Step2 set Frequency, calculate CAL*/ +void DRAMFreqSetting(DRAM_SYS_ATTR * DramAttr); +//TimingSetting.c +/*Step3 Set DRAM Timing*/ +void DRAMTimingSetting(DRAM_SYS_ATTR * DramAttr); +//DRDY_BL.c +/*Step4 DRDY*/ +void DRAMDRDYSetting(DRAM_SYS_ATTR * DramAttr); +//DRDY_BL.c +/*Step5 Burst Length*/ +void DRAMBurstLength(DRAM_SYS_ATTR * DramAttr); +//DrivingSetting.c +/*Step6 DRAM Driving Adjustment*/ +void DRAMDriving(DRAM_SYS_ATTR * DramAttr); + +//ClkCtrl.c +/*Step7 duty cycle control*/ +void DutyCycleCtrl(DRAM_SYS_ATTR * DramAttr); +//ClkCtrl.c +/*Step8 DRAM clock phase and delay control*/ +void DRAMClkCtrl(DRAM_SYS_ATTR * DramAttr); + +//DevInit.c +/*Step9 set register before init DRAM device*/ +void DRAMRegInitValue(DRAM_SYS_ATTR * DramAttr); + +//DevInit.c +/*Step10 DDR and DDR2 initialize process*/ +void DRAMInitializeProc(DRAM_SYS_ATTR * DramAttr); + +//DQSSearch.c +/*Step11 Search DQS and DQ output delay*/ +void DRAMDQSOutputSearch(DRAM_SYS_ATTR * DramAttr); + +//DQSSearch.c +/*Step12 Search DQS input delay*/ +void DRAMDQSInputSearch(DRAM_SYS_ATTR * DramAttr); + +//RankMap.c +/*Step13 Interleav function in rankmap.c*/ +void DRAMBankInterleave(DRAM_SYS_ATTR * DramAttr); + +//RankMap.c +/*Step14 Sizing*/ +void DRAMSizingMATypeM(DRAM_SYS_ATTR * DramAttr); + + +//FinalSetting.c +/*Step15 DDR fresh counter setting*/ +void DRAMRefreshCounter(DRAM_SYS_ATTR * DramAttr); + +//FinnalSetting.c +/*Step16 Final register setting for improve performance*/ +void DRAMRegFinalValue(DRAM_SYS_ATTR * DramAttr); + + +/*set UMA*/ +void SetUMARam(); + +CB_STATUS InstallMemory(DRAM_SYS_ATTR * DramAttr, u32 RamSize); +CB_STATUS DDR2_DRAM_INIT(); + +#endif
Added: trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/DramUtil.c =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/DramUtil.c (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/DramUtil.c 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,249 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +void WaitMicroSec(UINTN MicroSeconds) +{ + u32 i; + + for (i = 0; i < 1024 * MicroSeconds; i++) { + __asm__ volatile ("nop\n\t"); + } + + return; +} + +/*=================================================================== +Function : via_write_phys() +Precondition : +Input : addr + value +Output : void +Purpose : +Reference : None +===================================================================*/ + +void via_write_phys(volatile u32 addr, volatile u32 value) +{ + volatile u32 *ptr; + ptr = (volatile u32 *) addr; + *ptr = (volatile u32) value; +} + +/*=================================================================== +Function : via_read_phys() +Precondition : +Input : addr +Output : u32 +Purpose : +Reference : None +===================================================================*/ + +u32 via_read_phys(volatile u32 addr) +{ + volatile u32 *ptr; + volatile u32 y; +// ptr = (volatile u32 *)addr; + y = *(volatile u32 *) addr; +// return *ptr; + return y; +} + + +/*=================================================================== +Function : DimmRead() +Precondition : +Input : x +Output : u32 +Purpose : +Reference : None +===================================================================*/ + +u32 DimmRead(volatile u32 x) +{ // volatile u32 z; + volatile u32 y; + y = *(volatile u32 *) x; + + return y; +} + + +/*=================================================================== +Function : DramBaseTest() +Precondition : this function used to verify memory +Input : + BaseAdd, + length, + mode +Output : u32 +Purpose :write into and read out to verify if dram is correct +Reference : None +===================================================================*/ +BOOLEAN DramBaseTest(u32 BaseAdd, u32 Length, + DRAM_TEST_MODE Mode, BOOLEAN PrintFlag) +{ + u32 TestSpan; + u32 Data, Address, Address2; + u8 i, TestCount; + + //decide the test mode is continous or step + if (Mode == EXTENSIVE) { + //the test mode is continuos and must test each unit + TestSpan = 4; + TestCount = 1; + } else if (Mode == SPARE) { + // the test mode is step and test some unit + TestSpan = STEPSPAN; + TestCount = TESTCOUNT; + } else { + PRINT_DEBUG_MEM("the test mode is error\r"); + return FALSE; + } + + //write each test unit the value with TEST_PATTERN + for (Address = BaseAdd; Address < BaseAdd + Length; + Address += TestSpan) { + for (i = 0; i < TestCount; i++) + via_write_phys(Address + i * 4, TEST_PATTERN); + if (PrintFlag) { + if ((u32) Address % 0x10000000 == 0) { + PRINT_DEBUG_MEM("Write in Addr ="); + PRINT_DEBUG_MEM_HEX32(Address); + PRINT_DEBUG_MEM("\r"); + } + } + } + + //compare each test unit with the value of TEST_PATTERN + //and write it with compliment of TEST_PATTERN + for (Address = BaseAdd; Address < BaseAdd + Length; + Address += TestSpan) { + for (i = 0; i < TestCount; i++) { + Data = via_read_phys(Address + i * 4); + via_write_phys(Address + i * 4, + (u32) (~TEST_PATTERN)); + if (Data != TEST_PATTERN) { + PRINT_DEBUG_MEM + ("TEST_PATTERN ERROR !!!!! "); + Address2 = Address + i * 4; + PRINT_DEBUG_MEM_HEX32(Address2); + PRINT_DEBUG_MEM(" : "); + PRINT_DEBUG_MEM_HEX32(Data); + PRINT_DEBUG_MEM(" \r"); + return FALSE; + } + } + if (PrintFlag) { + if ((u32) Address % 0x10000000 == 0) { + PRINT_DEBUG_MEM("Write in Addr ="); + PRINT_DEBUG_MEM_HEX32(Address); + PRINT_DEBUG_MEM("\r"); + } + } + } + + + //compare each test unit with the value of ~TEST_PATTERN + for (Address = BaseAdd; Address < BaseAdd + Length; + Address += TestSpan) { + for (i = (u8) (TestCount); i > 0; i--) { + Data = via_read_phys(Address + (i - 1) * 4); + if (Data != ~TEST_PATTERN) { + + PRINT_DEBUG_MEM + ("~TEST_PATTERN ERROR !!!!! "); + Address2 = Address + (i - 1) * 4; + PRINT_DEBUG_MEM_HEX32(Address2); + PRINT_DEBUG_MEM(" : "); + PRINT_DEBUG_MEM_HEX32(Data); + PRINT_DEBUG_MEM(" \r"); + return FALSE; + } + } + } + + return TRUE; +} + +/*=================================================================== +Function : DumpRegisters() +Precondition : +Input : + pPCIPPI, + DevNum, + FuncNum +Output : Void +Purpose : +Reference : None +===================================================================*/ + +void DumpRegisters(INTN DevNum, INTN FuncNum) +{ + INTN i, j; + u8 ByteVal; + + ByteVal = 0; + //pci_write_config8(PCI_DEV(0, DevNum, FuncNum), 0xA1, ByteVal); + PRINT_DEBUG_MEM("\rDev %02x Fun %02x\r"); + PRINT_DEBUG_MEM + ("\r 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f\r"); + PRINT_DEBUG_MEM + ("---------------------------------------------------\r"); + for (i = 0; i < 0x10; i++) { + PRINT_DEBUG_MEM_HEX32(i); + for (j = 0; j < 0x10; j++) { + ByteVal = + pci_read_config8(PCI_DEV(0, DevNum, FuncNum), + i * 0x10 + j); + PRINT_DEBUG_MEM_HEX8(ByteVal); + PRINT_DEBUG_MEM(" "); + + } + PRINT_DEBUG_MEM("\r"); + } + return; +} + + +/*=================================================================== +Function : dumpnorth() +Precondition : +Input : + pPCIPPI, + Func +Output : Void +Purpose : +Reference : None +===================================================================*/ + +void dumpnorth(u8 Func) +{ + u16 r, c; + u8 ByteVal; + PRINT_DEBUG_MEM("Dump North!!!\r"); + for (r = 0; r < 32; r++) { + for (c = (u16) (r << 3); c < (r << 3) + 8; c++) { + ByteVal = 0; + ByteVal = pci_read_config8(PCI_DEV(0, 0, Func), c); + PRINT_DEBUG_MEM_HEX16(c); + PRINT_DEBUG_MEM("= "); + PRINT_DEBUG_MEM_HEX8(ByteVal); + } + PRINT_DEBUG_MEM("\r"); + } +}
Added: trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/DramUtil.h =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/DramUtil.h (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/DramUtil.h 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,47 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __DRAM_UTIL_H__ +#define __DRAM_UTIL_H__ + +#define STEPSPAN 0x1000 //the span when test memory in spare mode +#define TESTCOUNT 0x4 // the test count in each range when test memory in spare mode +#define TEST_PATTERN 0x5A5A5A5A //the test pattern + +typedef enum __DRAM_TEST_MODE { + EXTENSIVE, + SPARE, + MAXMODE +} DRAM_TEST_MODE; + +void WaitMicroSec(UINTN MicroSeconds); + +void via_write_phys(u32 addr, u32 value); + +u32 via_read_phys(u32 addr); + +u32 DimmRead(u32 x); + +BOOLEAN DramBaseTest(u32 BaseAdd, u32 Length, + DRAM_TEST_MODE mode, BOOLEAN PrintFlag); + +void DumpRegisters(INTN DevNum, INTN FuncNum); + +void dumpnorth(u8 Func); +#endif
Added: trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/Translatorddr2init.c =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/Translatorddr2init.c (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/Translatorddr2init.c 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,34 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define CB_SUCCESS 0x0 +#define CB_INVALID_PARAMETER 0x2 +#define CB_NOT_READY 0x6 +#define CB_DEVICE_ERROR 0x7 +#define TRUE 1 +#define FALSE 0 + + +typedef int8_t INT8; +typedef unsigned long uintn_t; +typedef uintn_t UINTN; +typedef long intn_t; +typedef intn_t INTN; +typedef UINTN CB_STATUS; +typedef uint8_t BOOLEAN;
Added: trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/ClkCtrl.c =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/ClkCtrl.c (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/ClkCtrl.c 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,312 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +void DutyCycleCtrl(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data; + u8 FreqId; + u8 i; + + if (DIMMFREQ_800 == DramAttr->DramFreq) + FreqId = 2; + else if (DIMMFREQ_667 == DramAttr->DramFreq) + FreqId = 3; + else if (DIMMFREQ_533 == DramAttr->DramFreq) + FreqId = 4; + else if (DIMMFREQ_400 == DramAttr->DramFreq) + FreqId = 5; + else + FreqId = 5; + + if (DramAttr->RankNumChA > 0) { // 1 rank + for (i = 0; i < DUTY_CYCLE_REG_NUM; i++) { + Data = + pci_read_config8(MEMCTRL, + ChA_Duty_Control_DDR2[i][0]); + Data &= ChA_Duty_Control_DDR2[i][1]; /*Mask */ + Data |= ChA_Duty_Control_DDR2[i][FreqId]; /*set Value */ + pci_write_config8(MEMCTRL, + ChA_Duty_Control_DDR2[i][0], + Data); + } + } + if (1 == ENABLE_CHC) { // 1 rank + for (i = 0; i < DUTY_CYCLE_REG_NUM; i++) { + Data = + pci_read_config8(MEMCTRL, + ChB_Duty_Control_DDR2[i][0]); + Data &= ChB_Duty_Control_DDR2[i][1]; /*Mask */ + Data |= ChB_Duty_Control_DDR2[i][FreqId]; /*set Value */ + pci_write_config8(MEMCTRL, + ChB_Duty_Control_DDR2[i][0], + Data); + } + } + +} + +/* +DRAM clock phase and delay control +*/ +//sub routine list +void ClkPhsCtrlFBMDDR2(DRAM_SYS_ATTR * DramAttr); + +void WrtDataPhsCtrl(DRAM_SYS_ATTR * DramAttr); + +void DQDQSOutputDlyCtrl(DRAM_SYS_ATTR * DramAttr); + +void DQSInputCaptureCtrl(DRAM_SYS_ATTR * DramAttr); + +void DCLKPhsCtrl(DRAM_SYS_ATTR * DramAttr); + + +void DRAMClkCtrl(DRAM_SYS_ATTR * DramAttr) +{ + /*write data clock phase control */ + WrtDataPhsCtrl(DramAttr); + /*clock phase control */ + ClkPhsCtrlFBMDDR2(DramAttr); + /**/ DQDQSOutputDlyCtrl(DramAttr); + /**/ DQSInputCaptureCtrl(DramAttr); + DCLKPhsCtrl(DramAttr); +} + +void ClkPhsCtrlFBMDDR2(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data; + + u8 FreqId, i; + + if (DramAttr->DramFreq == DIMMFREQ_800) + FreqId = 2; + else if (DramAttr->DramFreq == DIMMFREQ_667) + FreqId = 3; + else if (DramAttr->DramFreq == DIMMFREQ_533) + FreqId = 4; + else if (DramAttr->DramFreq == DIMMFREQ_400) + FreqId = 5; + else + FreqId = 5; + /*channel A */// 2~4 Rank + if (DramAttr->RankNumChA == 1) { // 1 rank + for (i = 0; i < 3; i++) { + Data = + pci_read_config8(MEMCTRL, + DDR2_ChA_Clk_Phase_Table_1R[i] + [0]); + Data &= DDR2_ChA_Clk_Phase_Table_1R[i][1]; /*Mask */ + Data |= DDR2_ChA_Clk_Phase_Table_1R[i][FreqId]; /*set Value */ + pci_write_config8(MEMCTRL, + DDR2_ChA_Clk_Phase_Table_1R[i] + [0], Data); + } + } else if (DramAttr->RankNumChA > 1) { // 2~4 Rank + for (i = 0; i < 3; i++) { + Data = + pci_read_config8(MEMCTRL, + DDR2_ChA_Clk_Phase_Table_2R[i] + [0]); + Data &= DDR2_ChA_Clk_Phase_Table_2R[i][1]; /*Mask */ + Data |= DDR2_ChA_Clk_Phase_Table_2R[i][FreqId]; /*set Value */ + pci_write_config8(MEMCTRL, + DDR2_ChA_Clk_Phase_Table_2R[i] + [0], Data); + } + } +#if ENABLE_CHB + if (DramAttr->RankNumChB > 0) { // 1 rank + for (i = 0; i < 3; i++) { + Data = + pci_read_config8(MEMCTRL, + DDR2_ChB_Clk_Phase_Table_1R[i] + [0]); + Data &= DDR2_ChB_Clk_Phase_Table_1R[i][1]; /*Mask */ + Data |= DDR2_ChB_Clk_Phase_Table_1R[i][FreqId]; /*set Value */ + pci_write_config8(MEMCTRL, + DDR2_ChB_Clk_Phase_Table_1R[i] + [0], Data); + } + } +#endif +} + +void WrtDataPhsCtrl(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data; + u8 FreqId, i; + + + if (DIMMFREQ_800 == DramAttr->DramFreq) + FreqId = 2; + else if (DIMMFREQ_667 == DramAttr->DramFreq) + FreqId = 3; + else if (DIMMFREQ_533 == DramAttr->DramFreq) + FreqId = 4; + else if (DIMMFREQ_400 == DramAttr->DramFreq) + FreqId = 5; + else + FreqId = 5; + + if (DramAttr->RankNumChA > 0) { // 1 rank + for (i = 0; i < WrtData_REG_NUM; i++) { + Data = + pci_read_config8(MEMCTRL, + DDR2_ChA_WrtData_Phase_Table + [i][0]); + Data &= DDR2_ChA_WrtData_Phase_Table[i][1]; /*Mask */ + Data |= DDR2_ChA_WrtData_Phase_Table[i][FreqId]; /*set Value */ + pci_write_config8(MEMCTRL, + DDR2_ChA_WrtData_Phase_Table[i] + [0], Data); + } + } +#if ENABLE_CHB + if (DramAttr->RankNumChB > 0) { // 1 rank + for (i = 0; i < WrtData_REG_NUM; i++) { + Data = + pci_read_config8(MEMCTRL, + DDR2_ChB_WrtData_Phase_Table + [i][0]); + Data &= DDR2_ChB_WrtData_Phase_Table[i][1]; /*Mask */ + Data |= DDR2_ChB_WrtData_Phase_Table[i][FreqId]; /*set Value */ + pci_write_config8(MEMCTRL, + DDR2_ChB_WrtData_Phase_Table[i] + [0], Data); + } + } +#endif + Data = pci_read_config8(MEMCTRL, 0x8C); + Data &= 0xFC; + Data |= 0x03; + pci_write_config8(MEMCTRL, 0x8C, Data); +} + +void DQDQSOutputDlyCtrl(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data; + u8 FreqId; + + if (DIMMFREQ_400 == DramAttr->DramFreq) + FreqId = 0; + else if (DIMMFREQ_533 == DramAttr->DramFreq) + FreqId = 1; + else if (DIMMFREQ_667 == DramAttr->DramFreq) + FreqId = 2; + else if (DIMMFREQ_800 == DramAttr->DramFreq) + FreqId = 2; + else + FreqId = 0; + if (DramAttr->RankNumChA > 0) { + Data = DDR2_CHA_DQ_DQS_Delay_Table[FreqId][0]; + pci_write_config8(MEMCTRL, 0xf0, Data); + + Data = DDR2_CHA_DQ_DQS_Delay_Table[FreqId][1]; + pci_write_config8(MEMCTRL, 0xf1, Data); + + Data = DDR2_CHA_DQ_DQS_Delay_Table[FreqId][2]; + pci_write_config8(MEMCTRL, 0xf2, Data); + + Data = DDR2_CHA_DQ_DQS_Delay_Table[FreqId][3]; + pci_write_config8(MEMCTRL, 0xf3, Data); + } +#if ENABLE_CHB + if (DramAttr->RankNumChB > 0) { + Data = DDR2_CHB_DQ_DQS_Delay_Table[FreqId][0]; + pci_write_config8(MEMCTRL, 0xf4, Data); + + Data = DDR2_CHB_DQ_DQS_Delay_Table[FreqId][1]; + pci_write_config8(MEMCTRL, 0xf5, Data); + + Data = DDR2_CHB_DQ_DQS_Delay_Table[FreqId][2]; + pci_write_config8(MEMCTRL, 0xf6, Data); + + Data = DDR2_CHB_DQ_DQS_Delay_Table[FreqId][3]; + pci_write_config8(MEMCTRL, 0xf7, Data); + } +#endif +} + +void DQSInputCaptureCtrl(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data; + u8 FreqId, i; + + if (DIMMFREQ_800 == DramAttr->DramFreq) + FreqId = 2; + else if (DIMMFREQ_667 == DramAttr->DramFreq) + FreqId = 3; + else if (DIMMFREQ_533 == DramAttr->DramFreq) + FreqId = 4; + else if (DIMMFREQ_400 == DramAttr->DramFreq) + FreqId = 5; + else + FreqId = 2; + + Data = 0x8A; + pci_write_config8(MEMCTRL, 0x77, Data); + + if (DramAttr->RankNumChA > 0) { // 1 rank + for (i = 0; i < DQS_INPUT_CAPTURE_REG_NUM; i++) { + Data = + pci_read_config8(MEMCTRL, + DDR2_ChA_DQS_Input_Capture_Tbl + [i][0]); + Data &= DDR2_ChA_DQS_Input_Capture_Tbl[i][1]; /*Mask */ + Data |= DDR2_ChA_DQS_Input_Capture_Tbl[i][FreqId]; /*set Value */ + pci_write_config8(MEMCTRL, + DDR2_ChA_DQS_Input_Capture_Tbl[i] + [0], Data); + } + } +#if ENABLE_CHB + if (DramAttr->RankNumChB > 0) { // 1 rank + for (i = 0; i < DQS_INPUT_CAPTURE_REG_NUM; i++) { + Data = + pci_read_config8(MEMCTRL, + DDR2_ChB_DQS_Input_Capture_Tbl + [i][0]); + Data &= DDR2_ChB_DQS_Input_Capture_Tbl[i][1]; /*Mask */ + Data |= DDR2_ChB_DQS_Input_Capture_Tbl[i][FreqId]; /*set Value */ + pci_write_config8(MEMCTRL, + DDR2_ChB_DQS_Input_Capture_Tbl[i] + [0], Data); + } + } +#endif +} + +//This is very important, if you don't set it correctly, dram will be unreliable +//set DCLK Phase control(Reg99H[6:1]) according the DDRII in the dimm +void DCLKPhsCtrl(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data; + + Data = 0; + Data = pci_read_config8(MEMCTRL, 0x99); + Data &= 0xE1; + //DDR in Dimm1, MCLKOA[4,3,0] will output MCLK + if (DramAttr->RankPresentMap & 0x03) + Data |= 0x09 << 1; + //DDR in Dimm2, MCLKOA[5,2,1] will output MCLK + if (DramAttr->RankPresentMap & 0x0C) + Data |= 0x06 << 1; + + pci_write_config8(MEMCTRL, 0x99, Data); + +}
Added: trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/DQSSearch.c =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/DQSSearch.c (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/DQSSearch.c 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,98 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +void SetDQSOutputCHA(DRAM_SYS_ATTR * DramAttr); +void SetDQSOutputCHB(DRAM_SYS_ATTR * DramAttr); + +/*=================================================================== +Function : DRAMDQSOutputSearchCHA() +Precondition : +Input : + DramAttr: pointer point to DRAM_SYS_ATTR which consist the DDR and Dimm information + in MotherBoard +Output : Void +Purpose : set DQS output delay register reg70 and DQ output delay register reg71 +===================================================================*/ + +#define CH_A 0 +#define CH_B 1 +void DRAMDQSOutputSearch(DRAM_SYS_ATTR * DramAttr) +{ + if (DramAttr->RankNumChA > 0) + SetDQSOutputCHA(DramAttr); +} + +/*=================================================================== +Function : SetDQSOutputCHA() +Precondition : +Input : + DramAttr: pointer point to DRAM_SYS_ATTR which consist the DDR and Dimm information + in MotherBoard +Output : Void +Purpose : according the frequence set CHA DQS output +===================================================================*/ +void SetDQSOutputCHA(DRAM_SYS_ATTR * DramAttr) +{ + u8 Reg70, Reg71; + u8 Index; + + if (DramAttr->DramFreq == DIMMFREQ_400) + Index = 3; + else if (DramAttr->DramFreq == DIMMFREQ_533) + Index = 2; + else if (DramAttr->DramFreq == DIMMFREQ_667) + Index = 1; + else if (DramAttr->DramFreq == DIMMFREQ_800) + Index = 0; + else + Index = 3; + + if (DramAttr->RankNumChA > 2) { + Reg70 = Fixed_DQSA_3_4_Rank_Table[Index][0]; + Reg71 = Fixed_DQSA_3_4_Rank_Table[Index][1]; + } else { + Reg70 = Fixed_DQSA_1_2_Rank_Table[Index][0]; + Reg71 = Fixed_DQSA_1_2_Rank_Table[Index][1]; + } + pci_write_config8(MEMCTRL, 0x70, Reg70); + pci_write_config8(MEMCTRL, 0x71, Reg71); +} + + +//################ +// STEP 12 # +//################ + +/*=================================================================== +Function : DRAMDQSInputSearch() +Precondition : +Input : + DramAttr: pointer point to DRAM_SYS_ATTR which consist the DDR and Dimm information + in MotherBoard +Output : Void +Purpose : search DQS input delay for CHA/CHB +===================================================================*/ + +void DRAMDQSInputSearch(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data; + //auto mode + Data = 0x0; + pci_write_config8(MEMCTRL, 0x77, Data); +}
Added: trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/DRDY_BL.c =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/DRDY_BL.c (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/DRDY_BL.c 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,600 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +// Set P6IF DRDY Timing +// Because there are 1.5T & 2.5T CAS latency in DDR1 mode, we need to use RDELAYMD-0 +// +// Entry: +// EBP[29:25] = DRAM Speed, Dual_Channel +// VIA_NB2HOST_REG54[7:5] Host Frequency +// VIA_NB3DRAM_REG62[2:0] CAS Latency +// +// Modify NB_Reg: +// VIA_NB2HOST_REG54[3,1] +// VIA_NB2HOST_REG55[1] +// VIA_NB2HOST_REG60 +// VIA_NB2HOST_REG61 +// VIA_NB2HOST_REG62[3:0] +// VIA_NB2HOST_REG63 +// VIA_NB2HOST_REG64 +// VIA_NB2HOST_REG65[3:0] +// VIA_NB2HOST_REG66 +// VIA_NB2HOST_REG67[5:4] +// +// Processing: +//-------------------------------------------------------------------------- +// P6IF DRDY Timing Control: +// *Following algorithm to set DRDY timing +// Set P6IF DRDY Timing by the following 3 conditions: +// 1. RDELAYMD +// a.RDRPH(MD input internal timing control) +// b.CAS Latency +// RDELAYMD(1bit) = bit0 of (CL + RDRPH) +// for example: RDRPH=10b, CL3 -> F3_Rx56[5:4]=11b, 10b + 11b = 101b, RDELAYMD=1 (bit0) +// RDRPH=00b, CL2.5 -> F3_Rx56[5:4]=10b, 00b + 10b = 010b, RDELAYMD=0 (bit0) +// 2. CPU Frequency +// 3. DRAM Frequency +// +// According to above conditions, we create different tables: +// 1. RDELAYMD=0 : for integer CAS latency(ex. CL=3) +// 2. RDELAYMD=1 : for non-integer CAS latency(ex. CL=2.5) +// 3. Normal performance +// 4. Top performance : +// Using phase0 to a case has better performance. +// +// Note: The setting are related to performance and maybe affect DRAM initialize. +// Turn OFF(F2_Rx51[7]=0) this feature at csDRAMRegInitValueJ procedure. +// Turn ON(F2_Rx51[7]=1) this feature at csDRAMRegFinalValueJ procedure. +// +// If F2_Rx51[7]=0, then CPU always wait 8QW, a slower but most stable way +// If F2_Rx51[7]=1, then the timing will refer to F2_Rx60 ~ F2_Rx67, +// a fast way but may cause the system to be unstable. +// +// Coding: +// 1. RDELAYMD and user's option for performance can determine which table +// 2. CPU Frequency can get block offset of table +// 3. DRAM Frequency can get row offset of block +// 4. Set value +// +// PS: Fun2 Rx62, Rx65, Rx67 are don't care bits in 3296, CPU 266MHz doesn't be supported by 3296, +// but I still keep these bits in table to avoid the usage in future +// and do the fewest modification for code. +// + +// Early 3T +// Early 3T +#define P6IF_Misc_RFASTH 0x08 +#define P6IF_Misc2_RRRDYH3E 0x10 +#define P6IF_Misc2_RHTSEL 0x02 + +#define Rx54E3T P6IF_Misc_RFASTH +#define Rx55E3T P6IF_Misc2_RRRDYH3E + +// Early 2T +#define Rx54E2T 0x00 +#define Rx55E2T P6IF_Misc2_RRRDYH3E + +// Early 1T +#define Rx54E1T 0x00 +#define Rx55E1T 0x00 + +// Early 0T +#define Rx54E0T P6IF_Misc_RFASTH +#define Rx55E0T P6IF_Misc2_RRRDYH3E + P6IF_Misc2_RHTSEL + +// Latter 1T +#define Rx54L1T P6IF_Misc_RFASTH +#define Rx55L1T P6IF_Misc2_RHTSEL + + +#define PH0_0_0_0 0x00 +#define PH0_0_0_1 0x01 +#define PH0_0_0_2 0x02 +#define PH0_0_0_3 0x03 +#define PH0_0_1_0 0x04 +#define PH0_0_1_1 0x05 +#define PH0_0_1_2 0x06 +#define PH0_0_2_1 0x09 +#define PH0_0_2_2 0x0a +#define PH0_0_2_3 0x0b +#define PH0_0_3_2 0x0e +#define PH0_0_3_3 0x0f +#define PH0_1_1_0 0x14 +#define PH0_1_1_1 0x15 +#define PH0_2_1_2 0x26 +#define PH0_2_2_1 0x29 +#define PH0_2_2_2 0x2a +#define PH0_2_2_3 0x2b +#define PH0_2_3_2 0x2e +#define PH0_2_3_3 0x2f +#define PH0_3_2_2 0x3a +#define PH0_3_3_3 0x3f +#define PH1_0_0_0 0x40 +#define PH1_0_0_1 0x41 +#define PH1_0_1_1 0x45 +#define PH1_1_1_1 0x55 +#define PH1_2_1_1 0x65 +#define PH1_2_2_1 0x69 +#define PH2_1_1_1 0x95 +#define PH2_1_2_1 0x99 +#define PH2_1_2_2 0x9a +#define PH2_2_1_2 0xa6 +#define PH2_2_2_1 0xa9 +#define PH2_2_2_2 0xaa +#define PH2_2_3_2 0xae +#define PH2_2_3_3 0xaf +#define PH2_3_2_2 0xba +#define PH2_3_2_3 0xbb +#define PH2_3_3_2 0xbe +#define PH3_2_2_3 0xeb +#define PH3_2_3_2 0xee +#define PH3_2_3_3 0xef +#define PH3_3_3_3 0xff + +#define PT894_RDRDY_TBL_Width 10 +#define PT894_RDRDY_TBL_Block 60 + +static const u8 PT894_128bit_DELAYMD0_RCONV0[6][6][PT894_RDRDY_TBL_Width] = +// ----------------------------------------------------------------------------------------------------------------- +// RX60 RX61 RX62 RX63 RX64 RX65 RX66 RX67 RX54[3,1] RX55[3,1] CPU/DRAM +// LN4:1 LN8:5 LN10:9 QW4:1 QW8:5 QW10:9 WS8:1 WS10:9 RFASTH RRRDYH3E +// RCONV RHTSEL +// ----------------------------------------------------------------------------------------------------------------- +{ +// cpu100 + { + {PH0_1_1_1, PH0_0_0_0, PH0_0_0_0, PH0_1_1_1, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 100/100 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 100/133 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 100/166 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 100/200 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 100/266 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T} // 100/333 + }, +// cpu133 + { + {PH0_2_2_1, PH0_0_0_0, PH0_0_0_0, PH0_2_2_1, PH0_0_0_0, PH0_0_0_0, 0x01, 0x00, Rx54E3T, Rx55E3T}, // 133/100 + {PH1_1_1_1, PH0_0_0_0, PH0_0_0_0, PH1_1_1_1, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 133/133 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 133/166 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 133/200 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 133/266 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T} // 133/333 + }, +// cpu200 + { + {PH0_3_3_3, PH0_0_0_0, PH0_0_0_0, PH0_2_2_2, PH0_0_0_0, PH0_0_0_0, 0x07, 0x00, Rx54E2T, Rx55E2T}, // 200/100 + {PH2_3_2_3, PH0_0_0_0, PH0_0_0_0, PH2_3_2_3, PH0_0_0_0, PH0_0_0_0, 0x0a, 0x00, Rx54E3T, Rx55E3T}, // 200/133 + {PH1_2_2_1, PH0_0_0_1, PH0_0_0_0, PH1_2_2_1, PH0_0_0_1, PH0_0_0_0, 0x01, 0x00, Rx54E3T, Rx55E3T}, // 200/166 + {PH1_1_1_1, PH0_0_1_1, PH0_0_0_0, PH1_1_1_1, PH0_0_1_1, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 200/200 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 200/266 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T} // 200/333 + }, +// cpu166 + { + {PH0_2_3_3, PH0_0_0_0, PH0_0_0_0, PH0_2_2_3, PH0_0_0_0, PH0_0_0_0, 0x05, 0x00, Rx54E3T, Rx55E3T}, // 166/100 + {PH1_2_2_1, PH0_0_0_0, PH0_0_0_0, PH1_2_2_1, PH0_0_0_0, PH0_0_0_0, 0x01, 0x00, Rx54E3T, Rx55E3T}, // 166/133 + {PH1_1_1_1, PH0_0_0_1, PH0_0_0_0, PH1_1_1_1, PH0_0_0_1, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 166/166 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 166/200 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 166/266 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T} // 166/333 + }, +// cpu266 + { + {PH0_2_2_3, PH0_0_0_0, PH0_0_0_0, PH0_0_1_1, PH0_0_0_0, PH0_0_0_0, 0x07, 0x00, Rx54E1T, Rx55E1T}, // 266/100 + {PH3_3_3_3, PH0_0_0_0, PH0_0_0_0, PH2_2_2_2, PH0_0_0_0, PH0_0_0_0, 0x0f, 0x00, Rx54E2T, Rx55E2T}, // 266/133 + {PH3_2_3_3, PH0_0_0_3, PH0_0_0_0, PH3_2_3_3, PH0_0_0_2, PH0_0_0_0, 0x0d, 0x00, Rx54E3T, Rx55E3T}, // 266/166 + {PH2_2_2_2, PH0_0_2_2, PH0_0_0_0, PH2_1_2_2, PH0_0_1_2, PH0_0_0_0, 0x12, 0x00, Rx54E3T, Rx55E3T}, // 266/200 + {PH1_1_1_1, PH1_1_1_1, PH0_0_0_0, PH1_1_1_1, PH1_1_1_1, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 266/266 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T} // 266/333 + }, +// cpu333 + { + {PH0_1_1_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x07, 0x00, Rx54E0T, Rx55E0T}, // 333/100 + {PH1_1_1_1, PH0_0_0_0, PH0_0_0_0, PH1_1_1_1, PH0_0_0_0, PH0_0_0_0, 0x0f, 0x00, Rx54E1T, Rx55E1T}, // 333/133 + {PH3_3_3_3, PH0_0_0_3, PH0_0_0_0, PH3_3_3_3, PH0_0_0_3, PH0_0_0_0, 0x1f, 0x00, Rx54E2T, Rx55E2T}, // 333/166 + {PH2_2_1_2, PH0_0_2_1, PH0_0_0_0, PH1_2_1_1, PH0_0_2_1, PH0_0_0_0, 0x36, 0x00, Rx54E2T, Rx55E2T}, // 333/200 + {PH2_1_1_1, PH2_1_1_1, PH0_0_0_0, PH2_1_1_1, PH2_1_1_1, PH0_0_0_0, 0x44, 0x00, Rx54E3T, Rx55E3T}, // 333/266 + {PH2_2_2_2, PH2_2_2_2, PH0_0_2_2, PH2_2_2_2, PH2_2_2_2, PH0_0_2_2, 0x00, 0x00, Rx54E3T, Rx55E3T} // 333/333 + } +}; + +static const u8 PT894_128bit_DELAYMD1_RCONV0[6][6][PT894_RDRDY_TBL_Width] = +// ----------------------------------------------------------------------------------------------------------------- +// RX60 RX61 RX62 RX63 RX64 RX65 RX66 RX67 RX54[3,1] RX55[3,1] CPU/DRAM +// LN4:1 LN8:5 LN10:9 QW4:1 QW8:5 QW10:9 WS8:1 WS10:9 RFASTH RRRDYH3E +// RCONV RHTSEL +// ----------------------------------------------------------------------------------------------------------------- +{ +// cpu100 + { + {PH0_1_1_1, PH0_0_0_0, PH0_0_0_0, PH0_1_1_1, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 100/100 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 100/133 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 100/166 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 100/200 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 100/266 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T} // 100/333 + }, +// cpu133 + { + {PH0_3_2_2, PH0_0_0_0, PH0_0_0_0, PH0_3_2_2, PH0_0_0_0, PH0_0_0_0, 0x02, 0x00, Rx54E3T, Rx55E3T}, // 133/100 + {PH1_1_1_1, PH0_0_0_0, PH0_0_0_0, PH1_1_1_1, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 133/133 + {PH1_0_0_0, PH0_0_0_0, PH0_0_0_0, PH1_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 133/166 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 133/200 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 133/266 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T} // 133/333 + }, +// cpu200 + { + {PH0_2_2_2, PH0_0_0_0, PH0_0_0_0, PH0_1_1_1, PH0_0_0_0, PH0_0_0_0, 0x07, 0x00, Rx54E1T, Rx55E1T}, // 200/100 + {PH2_2_2_2, PH0_0_0_0, PH0_0_0_0, PH2_1_2_1, PH0_0_0_0, PH0_0_0_0, 0x0a, 0x00, Rx54E2T, Rx55E2T}, // 200/133 + {PH2_2_2_2, PH0_0_0_2, PH0_0_0_0, PH2_2_2_2, PH0_0_0_2, PH0_0_0_0, 0x04, 0x00, Rx54E3T, Rx55E3T}, // 200/166 + {PH2_2_2_2, PH0_0_2_2, PH0_0_0_0, PH2_2_2_2, PH0_0_2_2, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 200/200 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 200/266 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T} // 200/333 + }, +// cpu166 + { + {PH0_2_2_2, PH0_0_0_0, PH0_0_0_0, PH0_2_1_2, PH0_0_0_0, PH0_0_0_0, 0x05, 0x00, Rx54E2T, Rx55E2T}, // 166/100 + {PH2_3_2_2, PH0_0_0_0, PH0_0_0_0, PH2_2_2_2, PH0_0_0_0, PH0_0_0_0, 0x02, 0x00, Rx54E3T, Rx55E3T}, // 166/133 + {PH2_2_2_2, PH0_0_0_2, PH0_0_0_0, PH2_2_2_2, PH0_0_0_2, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 166/166 + {PH1_0_0_0, PH0_0_0_1, PH0_0_0_0, PH1_0_0_0, PH0_0_0_1, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 166/200 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 166/266 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T} // 166/333 + }, +// cpu266 + { + {PH0_1_1_1, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x07, 0x00, Rx54E0T, Rx55E0T}, // 266/100 + {PH2_2_2_2, PH0_0_0_0, PH0_0_0_0, PH1_1_1_1, PH0_0_0_0, PH0_0_0_0, 0x0f, 0x00, Rx54E1T, Rx55E1T}, // 266/133 + {PH2_2_2_2, PH0_0_0_2, PH0_0_0_0, PH2_2_1_2, PH0_0_0_2, PH0_0_0_0, 0x15, 0x00, Rx54E2T, Rx55E2T}, // 266/166 + {PH3_2_3_3, PH0_0_2_3, PH0_0_0_0, PH2_2_3_2, PH0_0_2_3, PH0_0_0_0, 0x24, 0x00, Rx54E3T, Rx55E3T}, // 266/200 + {PH2_2_2_2, PH2_2_2_2, PH0_0_0_0, PH2_2_2_2, PH2_2_2_2, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 266/266 + {PH0_0_0_1, PH0_0_1_1, PH0_0_1_0, PH0_0_0_1, PH0_0_1_1, PH0_0_1_0, 0x00, 0x00, Rx54E3T, Rx55E3T} // 266/333 + }, +// cpu333 + { + {PH0_3_2_2, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x07, 0x00, Rx54E0T, Rx55E0T}, // 333/100 + {PH1_1_1_1, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x0f, 0x00, Rx54E0T, Rx55E0T}, // 333/133 + {PH2_2_2_2, PH0_0_0_2, PH0_0_0_0, PH2_2_2_2, PH0_0_0_2, PH0_0_0_0, 0x1f, 0x00, Rx54E1T, Rx55E1T}, // 333/166 + {PH2_3_2_2, PH0_0_3_2, PH0_0_0_0, PH2_2_2_2, PH0_0_2_2, PH0_0_0_0, 0x1b, 0x00, Rx54E2T, Rx55E2T}, // 333/200 + {PH2_2_2_2, PH2_2_2_2, PH0_0_0_0, PH2_2_2_1, PH2_2_2_1, PH0_0_0_0, 0x88, 0x00, Rx54E3T, Rx55E3T}, // 333/266 + {PH2_2_2_2, PH2_2_2_2, PH0_0_2_2, PH2_2_2_2, PH2_2_2_2, PH0_0_2_2, 0x00, 0x00, Rx54E3T, Rx55E3T} // 333/333 + } +}; + + +static const u8 PT894_64bit_DELAYMD0_RCONV0[6][6][PT894_RDRDY_TBL_Width] = +// ----------------------------------------------------------------------------------------------------------------- +// RX60 RX61 RX62 RX63 RX64 RX65 RX66 RX67 RX54[3,1] RX55[3,1] CPU/DRAM +// LN4:1 LN8:5 LN10:9 QW4:1 QW8:5 QW10:9 WS8:1 WS10:9 RFASTH RRRDYH3E +// RCONV RHTSEL +// ----------------------------------------------------------------------------------------------------------------- +{ +// cpu100 + { + {PH0_2_2_2, PH0_0_0_0, PH0_0_0_0, PH0_1_1_1, PH0_0_0_0, PH0_0_0_0, 0x07, 0x00, Rx54E3T, Rx55E3T}, // 100/100 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x09, 0x00, Rx54E3T, Rx55E3T}, // 100/133 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 100/166 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 100/200 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 100/266 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T} // 100/333 + }, +// cpu133 + { + {PH0_2_3_2, PH0_0_0_0, PH0_0_0_0, PH0_0_1_0, PH0_0_0_0, PH0_0_0_0, 0x07, 0x00, Rx54E2T, Rx55E2T}, // 133/100 + {PH2_2_2_2, PH0_0_0_0, PH0_0_0_0, PH1_1_1_1, PH0_0_0_0, PH0_0_0_0, 0x0f, 0x00, Rx54E3T, Rx55E3T}, // 133/133 + {PH1_0_0_0, PH0_0_0_1, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x07, 0x00, Rx54E3T, Rx55E3T}, // 133/166 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 133/200 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 133/266 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T} // 133/333 + }, +// cpu200 + { + {PH0_3_3_3, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x07, 0x00, Rx54E0T, Rx55E0T}, // 200/100 + {PH2_2_2_2, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x0f, 0x00, Rx54E1T, Rx55E1T}, // 200/133 + {PH3_3_3_3, PH0_0_0_3, PH0_0_0_0, PH1_2_2_1, PH0_0_0_1, PH0_0_0_0, 0x1f, 0x00, Rx54E3T, Rx55E3T}, // 200/166 + {PH2_2_2_2, PH0_0_2_2, PH0_0_0_0, PH1_1_1_1, PH0_0_1_1, PH0_0_0_0, 0x3f, 0x00, Rx54E3T, Rx55E3T}, // 200/200 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E1T, Rx55E1T}, // 200/266 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T} // 200/333 +// DDR2 Both E3T and E2T Fail, need set to E1T, db PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 00110011b, 00000000b, Rx54E3T, Rx55E3T ;200/266 + }, +// cpu166 + { + {PH0_2_3_2, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x07, 0x00, Rx54E1T, Rx55E1T}, // 166/100 + {PH2_2_2_2, PH0_0_0_0, PH0_0_0_0, PH0_0_1_0, PH0_0_0_0, PH0_0_0_0, 0x0f, 0x00, Rx54E2T, Rx55E2T}, // 166/133 + {PH2_2_2_2, PH0_0_0_2, PH0_0_0_0, PH1_1_1_1, PH0_0_0_1, PH0_0_0_0, 0x1f, 0x00, Rx54E3T, Rx55E3T}, // 166/166 + {PH1_0_0_1, PH0_0_1_1, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x1e, 0x00, Rx54E3T, Rx55E3T}, // 166/200 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 166/266 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T} // 166/333 + }, +// cpu266 + { + {PH0_2_2_2, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x07, 0x00, Rx54L1T, Rx55L1T}, // 266/100 + {PH1_1_1_1, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x0f, 0x00, Rx54L1T, Rx55L1T}, // 266/133 + {PH3_2_3_2, PH0_0_0_2, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x1f, 0x00, Rx54E1T, Rx55E1T}, // 266/166 + {PH3_2_2_3, PH0_0_2_2, PH0_0_0_0, PH1_0_0_1, PH0_0_0_0, PH0_0_0_0, 0x3f, 0x00, Rx54E2T, Rx55E2T}, // 266/200 + {PH2_2_2_2, PH2_2_2_2, PH0_0_0_0, PH1_1_1_1, PH1_1_1_1, PH0_0_0_0, 0xff, 0x00, Rx54E3T, Rx55E3T}, // 266/266 + {PH0_0_1_1, PH0_1_1_1, PH0_0_1_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x9c, 0x03, Rx54E3T, Rx55E3T} // 266/333 + }, +// cpu333 + { + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54L1T, Rx55L1T}, // 333/100 ;DO NOT Support + {PH2_2_2_2, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x0f, 0x00, Rx54L1T, Rx55L1T}, // 333/133 + {PH3_3_3_3, PH0_0_0_3, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x1f, 0x00, Rx54E0T, Rx55E0T}, // 333/166 + {PH2_3_3_2, PH0_0_3_3, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x3f, 0x00, Rx54E1T, Rx55E1T}, // 333/200 + {PH3_3_3_3, PH3_3_3_3, PH0_0_0_0, PH2_1_1_1, PH2_1_1_1, PH0_0_0_0, 0xff, 0x00, Rx54E3T, Rx55E3T}, // 333/266 + {PH2_2_2_2, PH2_2_2_2, PH0_0_2_2, PH2_2_2_2, PH2_2_2_2, PH0_0_2_2, 0xff, 0x03, Rx54E3T, Rx55E3T} // 333/333 + } +}; + + +static const u8 PT894_64bit_DELAYMD1_RCONV0[6][6][PT894_RDRDY_TBL_Width] = +// ----------------------------------------------------------------------------------------------------------------- +// RX60 RX61 RX62 RX63 RX64 RX65 RX66 RX67 RX54[3,1] RX55[3,1] CPU/DRAM +// LN4:1 LN8:5 LN10:9 QW4:1 QW8:5 QW10:9 WS8:1 WS10:9 RFASTH RRRDYH3E +// RCONV RHTSEL +// ----------------------------------------------------------------------------------------------------------------- +{ +// cpu100 + { + {PH0_2_2_2, PH0_0_0_0, PH0_0_0_0, PH0_1_1_1, PH0_0_0_0, PH0_0_0_0, 0x07, 0x00, Rx54E3T, Rx55E3T}, // 100/100 + {PH1_0_0_1, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x06, 0x00, Rx54E3T, Rx55E3T}, // 100/133 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 100/166 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 100/200 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // ;100/266 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T} // 100/333 + }, +// cpu133 + { + {PH0_3_3_3, PH0_0_0_0, PH0_0_0_0, PH0_1_1_1, PH0_0_0_0, PH0_0_0_0, 0x07, 0x00, Rx54E2T, Rx55E2T}, // 133/100 + {PH2_2_2_2, PH0_0_0_0, PH0_0_0_0, PH1_1_1_1, PH0_0_0_0, PH0_0_0_0, 0x0f, 0x00, Rx54E3T, Rx55E3T}, // 133/133 + {PH1_0_1_1, PH0_0_0_1, PH0_0_0_0, PH1_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x1c, 0x00, Rx54E3T, Rx55E3T}, // 133/166 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x09, 0x00, Rx54E3T, Rx55E3T}, // 133/200 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 133/266 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T} // 133/333 + }, +// cpu200 + { + {PH0_2_2_2, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x07, 0x00, Rx54L1T, Rx55L1T}, // 200/100 + {PH3_3_3_3, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x0f, 0x00, Rx54E1T, Rx55E1T}, // 200/133 + {PH2_2_3_3, PH0_0_0_2, PH0_0_0_0, PH1_0_1_1, PH0_0_0_1, PH0_0_0_0, 0x1f, 0x00, Rx54E2T, Rx55E2T}, // 200/166 + {PH3_3_3_3, PH0_0_3_3, PH0_0_0_0, PH2_2_2_2, PH0_0_2_2, PH0_0_0_0, 0x3f, 0x00, Rx54E3T, Rx55E3T}, // 200/200 + {PH0_0_1_1, PH0_0_1_1, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0xcc, 0x00, Rx54E3T, Rx55E3T}, // 200/266 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T} // 200/333 + }, +// cpu166 + { + {PH0_3_3_3, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x07, 0x00, Rx54E1T, Rx55E1T}, // 166/100 + {PH2_2_3_3, PH0_0_0_0, PH0_0_0_0, PH1_0_1_1, PH0_0_0_0, PH0_0_0_0, 0x0f, 0x00, Rx54E2T, Rx55E2T}, // 166/133 + {PH2_2_2_2, PH0_0_0_2, PH0_0_0_0, PH2_2_2_2, PH0_0_0_2, PH0_0_0_0, 0x1f, 0x00, Rx54E3T, Rx55E3T}, // 166/166 + {PH1_1_1_1, PH0_0_1_1, PH0_0_0_0, PH1_0_0_0, PH0_0_0_1, PH0_0_0_0, 0x39, 0x00, Rx54E3T, Rx55E3T}, // 166/200 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T}, // 166/266 + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54E3T, Rx55E3T} // 166/333 + }, +// cpu266 + { + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54L1T, Rx55L1T}, // 266/100 ;DO NOT Support + {PH2_2_2_2, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x0f, 0x00, Rx54L1T, Rx55L1T}, // 266/133 + {PH2_2_1_2, PH0_0_0_1, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x1f, 0x00, Rx54E0T, Rx55E0T}, // 266/166 + {PH3_3_3_3, PH0_0_3_3, PH0_0_0_0, PH1_1_1_1, PH0_0_1_1, PH0_0_0_0, 0x3f, 0x00, Rx54E2T, Rx55E2T}, // 266/200 + {PH3_3_3_3, PH3_3_3_3, PH0_0_0_0, PH2_2_2_2, PH2_2_2_2, PH0_0_0_0, 0xff, 0x00, Rx54E3T, Rx55E3T}, // 266/266 + {PH1_1_1_1, PH1_1_1_1, PH0_0_1_1, PH0_0_0_1, PH0_0_1_1, PH0_0_1_0, 0x73, 0x02, Rx54E3T, Rx55E3T} // 266/333 + }, +// cpu333 + { + {PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x00, 0x00, Rx54L1T, Rx55L1T}, // 333/100 ;DO NOT Support + {PH3_3_3_3, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x0f, 0x00, Rx54L1T, Rx55L1T}, // 333/133 + {PH2_2_2_2, PH0_0_0_2, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x1f, 0x00, Rx54L1T, Rx55L1T}, // 333/166 + {PH2_2_2_2, PH0_0_2_2, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, PH0_0_0_0, 0x3f, 0x00, Rx54E1T, Rx55E1T}, // 333/200 + {PH2_3_2_2, PH2_3_2_2, PH0_0_0_0, PH0_1_1_0, PH0_1_1_0, PH0_0_0_0, 0xff, 0x00, Rx54E2T, Rx55E2T}, // 333/266 + {PH3_3_3_3, PH3_3_3_3, PH0_0_3_3, PH2_2_2_2, PH2_2_2_2, PH0_0_2_2, 0xff, 0x03, Rx54E3T, Rx55E3T} // 333/333 + } +}; + +void DRAMDRDYSetting(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data, CL, RDRPH; + u8 CpuFreq, DramFreq; + u8 ProgData[PT894_RDRDY_TBL_Width]; + u8 DelayMode; + u8 DrdyMode; + u8 Index; + + /* + this function has 3 switchs, correspond to 3 level of Drdy setting. + 0:Slowest, 1:Default, 2:Optimize + you can only open one switch + */ +#if 1 //this is slowest + // 0 -> Slowest + //Write slowest value to register + + Data = 0xAA; + pci_write_config8(PCI_DEV(0, 0, 2), 0x60, Data); + + Data = 0x0A; + pci_write_config8(PCI_DEV(0, 0, 2), 0x61, Data); + + Data = 0x00; + pci_write_config8(PCI_DEV(0, 0, 2), 0x62, Data); + + Data = 0xAA; + pci_write_config8(PCI_DEV(0, 0, 2), 0x63, Data); + + Data = 0x0A; + pci_write_config8(PCI_DEV(0, 0, 2), 0x64, Data); + + Data = 0x00; + pci_write_config8(PCI_DEV(0, 0, 2), 0x65, Data); + + Data = 0x00; + pci_write_config8(PCI_DEV(0, 0, 2), 0x66, Data); + + Data = 0x00; + pci_write_config8(PCI_DEV(0, 0, 2), 0x67, Data); + + Data = pci_read_config8(PCI_DEV(0, 0, 2), 0x54); + Data = Data & 0xF5; + Data |= 0x08; + pci_write_config8(PCI_DEV(0, 0, 2), 0x54, Data); + + //Data=pci_read_config8(PCI_DEV(0,0,2), 0x55); + //Data = Data & (~0x20); + //pci_write_config8(PCI_DEV(0,0,2), 0x55, Data); + + //enable drdy timing + Data = pci_read_config8(PCI_DEV(0, 0, 2), 0x51); + Data = Data | 0x80; + pci_write_config8(PCI_DEV(0, 0, 2), 0x51, Data); +#endif +#if 0 //default + { + //disable drdy timing + Data = pci_read_config8(PCI_DEV(0, 0, 2), 0x51); + Data = Data & 0x7F; + pci_write_config8(PCI_DEV(0, 0, 2), 0x51, Data); + } +#endif +#if 0 // 2:Optimize + //CL :reg6x[2:0] + Data = pci_read_config8(MEMCTRL, 0x62); + CL = Data & 0x07; + + //RDRPH: reg7B[6:4] + Data = pci_read_config8(MEMCTRL, 0x7B); + RDRPH = (Data & 0x70) >> 4; + + //CpuFreq: F2Reg54[7:5] + Data = pci_read_config8(PCI_DEV(0, 0, 2), 0x54); + CpuFreq = (Data & 0xE0) >> 5; + + //DramFreq:F3Reg90[2:0] + Data = pci_read_config8(MEMCTRL, 0x90); + DramFreq = Data & 0x07; + + DelayMode = CL + RDRPH; // RDELAYMD = bit0 of (CAS Latency + RDRPH) + DelayMode &= 0x01; + + //In 364, there is no 128 bit + if (DelayMode == 1) { // DelayMode 1 + for (Index = 0; Index < PT894_RDRDY_TBL_Width; Index++) + ProgData[Index] = + PT894_64bit_DELAYMD1_RCONV0[CpuFreq][DramFreq] + [Index]; + } else { // DelayMode 0 + for (Index = 0; Index < PT894_RDRDY_TBL_Width; Index++) + ProgData[Index] = + PT894_64bit_DELAYMD0_RCONV0[CpuFreq][DramFreq] + [Index]; + } + + Data = ProgData[0]; + pci_write_config8(PCI_DEV(0, 0, 2), 0x60, Data); + + Data = ProgData[1]; + pci_write_config8(PCI_DEV(0, 0, 2), 0x61, Data); + + Data = ProgData[2]; + pci_write_config8(PCI_DEV(0, 0, 2), 0x62, Data); + + Data = ProgData[3]; + pci_write_config8(PCI_DEV(0, 0, 2), 0x63, Data); + + Data = ProgData[4]; + pci_write_config8(PCI_DEV(0, 0, 2), 0x64, Data); + + Data = ProgData[5]; + pci_write_config8(PCI_DEV(0, 0, 2), 0x65, Data); + + Data = ProgData[6]; + pci_write_config8(PCI_DEV(0, 0, 2), 0x66, Data); + + Data = ProgData[7]; + pci_write_config8(PCI_DEV(0, 0, 2), 0x67, Data); + + Data = pci_read_config8(PCI_DEV(0, 0, 2), 0x54); + Data = (Data & 0xF5) | ProgData[8]; + pci_write_config8(PCI_DEV(0, 0, 2), 0x54, Data); + + Data = pci_read_config8(PCI_DEV(0, 0, 2), 0x55); + Data = Data & (~0x22) | ProgData[9]; + pci_write_config8(PCI_DEV(0, 0, 2), 0x62, Data); + + //enable drdy timing + Data = pci_read_config8(PCI_DEV(0, 0, 2), 0x51); + Data = Data | 0x80; + pci_write_config8(PCI_DEV(0, 0, 2), 0x51, Data); +#endif +} + + +/*This routine process the ability for North Bridge side burst functionality +There are 3 variances that are valid: + 1. DIMM BL=8, chipset BL=8 + 2. DIMM BL=4, chipset BL=4 + 3. DIMM BL=4, chipset BL=8 (only happened on Dual channel) + Device 0 function 2 HOST:REG54[4] must be 1 when 128-bit mode. +Since DIMM will be initialized in each rank individually, + 1.If all DIMM BL=4, DIMM will initialize BL=4 first, + then check dual_channel flag to enable VIA_NB2HOST_REG54[4]. + 2.If all DIMM BL=8, DIMM will initialize BL=8 first, + then check dual_channel flag for re-initialize DIMM BL=4. + also VIA_NB2HOST_REG54[4] need to be enabled. +Chipset_BL8==>chipset side can set burst length=8 +two register need to set + 1. Device 0 function 2 HOST:REG54[4] + 2. Device 0 function 3 DRAM:REG6C[3] +*/ +void DRAMBurstLength(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data, BL; + u8 Sockets; + /*SPD byte16 bit3,2 describes the burst length supported. bit3=1 support BL=8 bit2=1 support BL=4 */ + BL = 0x0c; + for (Sockets = 0; Sockets < 2; Sockets++) { + if (DramAttr->DimmInfo[Sockets].bPresence) { + BL &= + (DramAttr->DimmInfo[Sockets]. + SPDDataBuf[SPD_SDRAM_BURSTLENGTH]); + } + } + + /*D0F3Rx6c bit3 CHA SDRAM effective burst length, for 64bit mode ranks =0 BL=4 ; =1 BL=8 */ + + if (BL & 0x08) /*All Assembly support BL=8 */ + BL = 0x8; /*set bit3 */ + else + BL = 0x00; /*clear bit3 */ + + Data = pci_read_config8(MEMCTRL, 0x6c); + Data = (u8) ((Data & 0xf7) | BL); + +#if ENABLE_CHB + if (DramAttr->RankNumChB > 0) { + BL = DramAttr->DimmInfo[2]. + SPDDataBuf[SPD_SDRAM_BURSTLENGTH]; + //Rx6c[1], CHB burst length + if (BL & 0x08) /*CHB support BL=8 */ + BL = 0x2; /*set bit1 */ + else + BL = 0x00; /*clear bit1 */ + + Data = (Data & 0xFD) | BL; + } +#endif + pci_write_config8(MEMCTRL, 0x6c, Data); +}
Added: trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/Detection.c =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/Detection.c (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/Detection.c 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,192 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define SMBUS_ADDR_CH_A_1 0xA0 // Dimmx +#define SMBUS_ADDR_CH_A_2 0xA2 // Dimmx +#define SMBUS_ADDR_CH_B_1 0xA4 // Dimmx +#define SMBUS_ADDR_CH_B_2 0xA6 // Dimmx + +/*read data*/ +CB_STATUS GetSPDData(u8 Slot, u8 Length, u8 * Buf); + +void DRAMCmdRate(DRAM_SYS_ATTR * DramAttr); + + + +CB_STATUS GetInfoFromSPD(DRAM_SYS_ATTR * DramAttr); + +CB_STATUS GetSPDData(u8 Slot, u8 Length, u8 * Buf) +{ + // CB_STATUS Status = CB_NOT_READY; + u8 Val; + u8 i; + + if (1 > Length || NULL == Buf) + return CB_INVALID_PARAMETER; + + for (i = 0; i < Length; i++) { + Val = get_spd_data(ctrl.channel0[Slot], i); + *(Buf + i) = Val; + } + return CB_SUCCESS; +} + +CB_STATUS DRAMDetect(DRAM_SYS_ATTR * DramAttr) +{ + CB_STATUS Status = CB_SUCCESS; + + PRINT_DEBUG_MEM("Dram Detection \r"); + + /*Read D0F3Rx6C , detect memory type DDR1 or DDR2 */ + // 353 supports DDR2 only + DramAttr->DramType = RAMTYPE_SDRAMDDR2; + /*get information for SPD */ + Status = GetInfoFromSPD(DramAttr); + if (CB_SUCCESS == Status) { + /*64bit or 128Bit */ + // + // if (RAMTYPE_SDRAMDDR == DramAttr->DramType) + + /*select command rate */ + DRAMCmdRate(DramAttr); + } + return Status; +} + + +// Determine 1T or 2T Command Rate: +// To enable 1T command Rate, the system will satisfy the following 3 conditions: +// 1. Each DRAM channel may have 1 or 2 ranks of DIMM. 3/4 ranks can not support 1T command rate +// It's for loading issue. 1T can supports (a). only one socket with two ranks OR +// (b). two sockets each with 1 rank. +// 2. User wishes to enable 1T command rate mode and turn on by Setup menu +// 3. If 1T command rate can be enabled, just set EBP bit here. +void DRAMCmdRate(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data; + + // 5.1t/2t command rate, use the stable set + //offset50 + DramAttr->CmdRate = 2; + Data = pci_read_config8(MEMCTRL, 0x50); + Data = (u8) (Data & 0xEE); + pci_write_config8(MEMCTRL, 0x50, Data); +} + +/*get SPD data and set RANK presence map*/ +/* +Sockets0,1 is Channel A / Sockets2,3 is Channel B +socket0 SPD device address 0x50 / socket1 SPD device address 0x51 +socket2 SPD device address 0x52 / socket3 SPD device address 0x53 +*/ +CB_STATUS GetInfoFromSPD(DRAM_SYS_ATTR * DramAttr) +{ + CB_STATUS Status; + u8 *pSPDDataBuf; + u8 ModuleDataWidth; + u8 ChipWidth; + u8 RankNum; + u8 LoadNum; + u8 Sockets, i; + BOOLEAN bFind; + bFind = FALSE; + Status = CB_DEVICE_ERROR; + + for (Sockets = 0; Sockets < MAX_SOCKETS; Sockets++) { + pSPDDataBuf = DramAttr->DimmInfo[Sockets].SPDDataBuf; + pSPDDataBuf[SPD_MEMORY_TYPE] = + get_spd_data(ctrl.channel0[Sockets], SPD_MEMORY_TYPE); + if (pSPDDataBuf[SPD_MEMORY_TYPE] == 0) { + Status = CB_NOT_READY; + } else { + Status = + GetSPDData(Sockets, SPD_DATA_SIZE, + pSPDDataBuf); + PRINT_DEBUG_MEM("SPD : \r"); + for (i = 0; i < SPD_DATA_SIZE; i++) { + PRINT_DEBUG_MEM(" "); + PRINT_DEBUG_MEM_HEX8(pSPDDataBuf[i]); + } + } + if (CB_SUCCESS == Status) { + /*if Dram Controller detected type not same as the type got from SPD, There are ERROR */ + if (pSPDDataBuf[SPD_MEMORY_TYPE] != + DramAttr->DramType) { + Status = CB_DEVICE_ERROR; /*Memory int error */ + PRINT_DEBUG_MEM + ("Memory Device ERROR: Dram Controller detected type != type got from SPD \r"); + break; + } + DramAttr->DimmInfo[Sockets].bPresence = TRUE; + /*calculate load number (chips number) */ + ModuleDataWidth = + (u8) (DramAttr->DimmInfo[Sockets]. + SPDDataBuf[SPD_SDRAM_MOD_DATA_WIDTH + + 1]); + ModuleDataWidth = (u8) (ModuleDataWidth << 8); + ModuleDataWidth |= + (u8) (DramAttr->DimmInfo[Sockets]. + SPDDataBuf[SPD_SDRAM_MOD_DATA_WIDTH]); + ChipWidth = + (u8) ((DramAttr->DimmInfo[Sockets]. + SPDDataBuf[SPD_SDRAM_WIDTH]) & 0x7F); + LoadNum = (u8) (ModuleDataWidth / ChipWidth); + + /*set the RANK map */ + RankNum = (u8) (pSPDDataBuf[SPD_SDRAM_DIMM_RANKS] & 0x3); /*get bit0,1, the Most number of supported RANK is 2 */ + if (RAMTYPE_SDRAMDDR2 == DramAttr->DramType) + RankNum++; /*for DDR bit[0,1] 01->1 RANK 10->2 RANK; for DDR2 bit[0,1] = 00 -> 1 RANK 01 -> 2 RANK */ + if (RankNum != 2 && RankNum != 1) { /*every DIMM have 1 or 2 ranks */ + Status = CB_DEVICE_ERROR; + PRINT_DEBUG_MEM + ("Memory Device ERROR: the number of RANK not support!\r"); + break; + } + + if (Sockets < 2) { /*sockets0,1 is channel A */ + DramAttr->RankNumChA = + (u8) (DramAttr->RankNumChA + RankNum); + DramAttr->DimmNumChA++; + DramAttr->LoadNumChA = + (u8) (DramAttr->LoadNumChA * LoadNum * + RankNum); + } else { /*sockets2,3 is channel B */ + + DramAttr->RankNumChB = + (u8) (DramAttr->RankNumChB + RankNum); + DramAttr->DimmNumChB++; + DramAttr->LoadNumChB = + (u8) (DramAttr->LoadNumChB * LoadNum * + RankNum);; + } + RankNum |= 1; /*set rank map */ + DramAttr->RankPresentMap |= + (RankNum << (Sockets * 2)); + bFind = TRUE; + } + } + PRINT_DEBUG_MEM("Rank Present Map:"); + PRINT_DEBUG_MEM_HEX8(DramAttr->RankPresentMap); + PRINT_DEBUG_MEM("\r"); + + if (bFind) + Status = CB_SUCCESS; + + return Status; +}
Added: trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/DevInit.c =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/DevInit.c (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/DevInit.c 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,1318 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +void DRAMSetVRNum(DRAM_SYS_ATTR * DramAttr, u8 PhyRank, // Physical Rank + u8 VirRank, // Virtual Rank + BOOLEAN Enable); + +void SetEndingAddr(DRAM_SYS_ATTR * DramAttr, u8 VirRank, // Ending address register number indicator (INDEX + INT8 Value // (value) add or subtract value to this and after banks + ); + +void InitDDR2CHA(DRAM_SYS_ATTR * DramAttr); + +void InitDDR2CHB(DRAM_SYS_ATTR * DramAttr); + +void InitDDR2CHC(DRAM_SYS_ATTR * DramAttr); + +CB_STATUS VerifyChc(); +/*=================================================================== +Function : DRAMRegInitValue() +Precondition : +Input : + DramAttr: pointer point to DRAM_SYS_ATTR which consist the DDR and Dimm information + in MotherBoard +Output : Void +Purpose : Set necessary register before DRAM initialize +===================================================================*/ + +static const u8 DramRegTbl[][3] = { + //Register AND OR + {0x50, 0x11, 0xEE}, // DDR default MA7 for DRAM init + {0x51, 0x11, 0x60}, // DDR default MA3 for CHB init + {0x52, 0x00, 0x33}, // DDR use BA0=M17, BA1=M18, + {0x53, 0x00, 0x3F}, // DDR BA2=M19 + + {0x54, 0x00, 0x00}, // default PR0=VR0; PR1=VR1 + {0x55, 0x00, 0x00}, // default PR2=VR2; PR3=VR3 + {0x56, 0x00, 0x00}, // default PR4=VR4; PR5=VR5 + {0x57, 0x00, 0x00}, // default PR4=VR4; PR5=VR5 + + {0x60, 0x00, 0x00}, // disable fast turn-around + {0x65, 0x00, 0xD9}, // AGP timer = 0XD; Host timer = 8; + {0x66, 0x00, 0x88}, //DRAMC Queue Size = 4; park at the last bus owner,Priority promotion timer = 8 + {0x68, 0x00, 0x0C}, + {0x69, 0xF0, 0x04}, // set RX69[3:0]=0000b + {0x6A, 0x00, 0x00}, // refresh counter + {0x6E, 0xF8, 0x80}, //must set 6E[7],or else DDR2 probe test will fail + // In here, we not set RX70~RX74, because we just init DRAM but no need R/W DRAM, + // when we check DQS input/output delay, then we need R/W DRAM. + + //{0x79, 0x00, 0x8F }, + {0x85, 0x00, 0x00}, + // {0x90, 0x87, 0x78 }, + // {0x91, 0x00, 0x46 }, + {0x40, 0x00, 0x00}, + {0, 0, 0} +}; + +void DRAMRegInitValue(DRAM_SYS_ATTR * DramAttr) +{ + u8 Idx, CL; + u8 Data; + + for (Idx = 0; DramRegTbl[Idx][0] != 0; Idx++) { + Data = pci_read_config8(MEMCTRL, DramRegTbl[Idx][0]); + Data &= DramRegTbl[Idx][1]; + Data |= DramRegTbl[Idx][2]; + pci_write_config8(MEMCTRL, DramRegTbl[Idx][0], Data); + } + + Data = 0x80; + pci_write_config8(PCI_DEV(0, 0, 4), 0xa3, Data); + + //set Dram Controllor mode + Data = pci_read_config8(MEMCTRL, 0x6c); + Data &= 0xFB; + if (ENABLE_CHC == 0) { + Data |= 0x4; //only CHA 64 bit mode + pci_write_config8(MEMCTRL, 0x6c, Data); + } else { + Data |= 0x0; //CHA + CHC + pci_write_config8(MEMCTRL, 0x6c, Data); + + //Data = 0xAA; + //pci_write_config8(MEMCTRL, 0xb1, Data); + + //set CHB DQSB input delay, or else will meet error which is some byte is right + //but another bit is error + Data = pci_read_config8(MEMCTRL, 0xff); + Data = (Data & 0x03) | 0x3D; + pci_write_config8(MEMCTRL, 0xff, Data); + + //enable CHC RXDB[7] + //Data=pci_read_config8(MEMCTRL, 0xdb); + // Data = (Data & 0x7F) | 0x80; + //pci_write_config8(MEMCTRL, 0xdb, Data); + + //rx62[2:0],CHA and CHB CL + Data = pci_read_config8(MEMCTRL, 0x62); + CL = Data & 0x07; + + //if CL = 6 , so I set CHB CL = 5 default + if (CL >= 4) + CL = 3; + + // set CHC Read CL rxDC[6:7] + Data = pci_read_config8(MEMCTRL, 0xdc); + Data = (Data & 0x3F) | (CL << 6); + pci_write_config8(MEMCTRL, 0xdc, Data); + // set CHC write CL rxDF[6:7] + Data = pci_read_config8(MEMCTRL, 0xdf); + Data = (Data & 0x3F) | (CL << 6); + pci_write_config8(MEMCTRL, 0xdf, Data); + // set CHC ODT RxDC[5:0] + Data = pci_read_config8(MEMCTRL, 0xdc); + Data = (Data & 0xC0) | 0x03; + pci_write_config8(MEMCTRL, 0xdc, Data); + + //set column type RXDD[6] and enable ODT PAD RXDD[7] + Data = pci_read_config8(MEMCTRL, 0xdd); + Data |= 0x80; + Idx = DramAttr->DimmInfo[2].SPDDataBuf[SPD_SDRAM_COL_ADDR]; + if ((Idx & 0x0F) == 10) + Data |= 0x40; //MA9~MA0 + else + Data &= 0xBF; //MA8~MA0 + pci_write_config8(MEMCTRL, 0xdd, Data); + } + + // Disable read DRAM fast ready ;Rx51[7] + // Disable Read Around Write ;Rx51[6] + + // Disable Consecutive Read ;RX52[1:0] + // disable speculative read + +} + +/*=================================================================== +Function : DRAMInitializeProc() +Precondition : +Input : + DramAttr: pointer point to DRAM_SYS_ATTR which consist the DDR and Dimm information + in MotherBoard +Output : Void +Purpose : DRAM initialize according to the bios porting guid +===================================================================*/ + +#define EXIST_TEST_PATTERN 0x55555555 +#define NOT_EXIST_TEST_PATTERN 0xAAAAAAAA +BOOLEAN ChkForExistLowBank() +{ + u32 *Address, data32; + + // Check Pattern + + Address = (u32 *) 8; + *Address = EXIST_TEST_PATTERN; + Address = (u32 *) 4; + *Address = EXIST_TEST_PATTERN; + +// _asm {WBINVD} + WaitMicroSec(100); + Address = (u32 *) 8; + data32 = *Address; + if (data32 != EXIST_TEST_PATTERN) + return FALSE; + Address = (u32 *) 4; + data32 = *Address; + if (data32 != EXIST_TEST_PATTERN) + return FALSE; + + // Check not Pattern + Address = (u32 *) 8; + *Address = NOT_EXIST_TEST_PATTERN; + Address = (u32 *) 4; + *Address = NOT_EXIST_TEST_PATTERN; + //_asm {WBINVD} + WaitMicroSec(100); + + + Address = (u32 *) 8; + data32 = *Address; + if (data32 != (u32) (NOT_EXIST_TEST_PATTERN)) + return FALSE; + Address = (u32 *) 4; + data32 = *Address; + if (data32 != (u32) (NOT_EXIST_TEST_PATTERN)) + return FALSE; + + return TRUE; +} + +void InitDDR2CHC(DRAM_SYS_ATTR * DramAttr); +void InitDDR2CHB(DRAM_SYS_ATTR * DramAttr); +void DRAMInitializeProc(DRAM_SYS_ATTR * DramAttr) +{ + u8 shift, idx; + BOOLEAN Status; + + shift = 1; + for (idx = 0; idx < MAX_RANKS; idx++) { + if ((DramAttr->RankPresentMap & shift) != 0) { + // Set VR# to physical rank indicated = PR + physical rank enable bit + DRAMSetVRNum(DramAttr, idx, idx, TRUE); + SetEndingAddr(DramAttr, idx, 0x10); // assume 1G size + if (idx < 4) //CHA init + InitDDR2CHA(DramAttr); //temp wjb 2007/1 only for compiling + // in the function InitDDR2,the parameter is no need + Status = ChkForExistLowBank(); + if (Status == TRUE) { + PRINT_DEBUG_MEM(" S\r"); + } else { + PRINT_DEBUG_MEM(" F\r"); + } + // Set VR# to physical rank indicated = 00h + physical rank enable bit + DRAMSetVRNum(DramAttr, idx, 0, FALSE); + SetEndingAddr(DramAttr, idx, -16); + } + shift <<= 1; + } + if (ENABLE_CHC) + InitDDR2CHC(DramAttr); + +} + + +/*=================================================================== +Function : DRAMSetVRNUM() +Precondition : +Input : + DramAttr: pointer point to DRAM_SYS_ATTR which consist the DDR and Dimm information + in MotherBoard + PhyRank: Physical Rank number + VirRank: Virtual Rank number + Enable: Enable/Disable Physical Rank +Output : Void +Purpose : Set virtual rank number for physical rank + Program the specific physical rank with specific virtual rank number + Program when necessary, otherwise don't touch the pr-vr-mapping registers +===================================================================*/ + +void DRAMSetVRNum(DRAM_SYS_ATTR * DramAttr, u8 PhyRank, // Physical Rank + u8 VirRank, // Virtual Rank + BOOLEAN Enable) +{ + u8 Data; + u8 AndData, OrData; + Data = pci_read_config8(MEMCTRL, (0x54 + (PhyRank >> 1))); + + OrData = 0; + if (Enable) + OrData |= 0x08; + OrData |= VirRank; + if ((PhyRank & 0x01) == 0x00) { + AndData = 0x0F; // keep the value of odd rank on PR # is even(keep 1,3,5,7) + OrData <<= 4; // VR #, value to be set + } else { + AndData = 0xF0; // keep the value of even rank on PR # is odd(keep 0,2,4,6) + } + Data &= AndData; + Data |= OrData; + pci_write_config8(MEMCTRL, (0x54 + (PhyRank >> 1)), Data); +} + + +/*=================================================================== +Function : SetEndingAddr() +Precondition : +Input : + DramAttr: pointer point to DRAM_SYS_ATTR which consist the DDR and Dimm information + in MotherBoard + VirRank: Virtual Rank number + Value: (value) add or subtract value to this and after banks +Output : Void +Purpose : Set ending address of virtual rank specified by VirRank +===================================================================*/ + +void SetEndingAddr(DRAM_SYS_ATTR * DramAttr, u8 VirRank, // Ending address register number indicator (INDEX + INT8 Value // (value) add or subtract value to this and after banks + ) { + u8 Data; + + // Read register,Rx40-Rx47(0,1,2,3,4,5,6,7) and set the ending address + Data = pci_read_config8(MEMCTRL, 0x40 + VirRank); + Data = (u8) (Data + Value); + pci_write_config8(MEMCTRL, 0x40 + VirRank, Data); + + //program the virank's begining address to zero + Data = 0x00; + pci_write_config8(MEMCTRL, 0x48 + VirRank, Data); +} + +/*=================================================================== +Function : InitDDR2() +Precondition : +Input : + DramAttr: pointer point to DRAM_SYS_ATTR which consist the DDR and Dimm information + in MotherBoard +Output : Void +Purpose : Initialize DDR2 by standard sequence +===================================================================*/ + +// DLL: Enable Reset +static const u32 CHA_MRS_DLL_150[2] = { 0x00020200, 0x00000800 }; // with 150 ohm (A17=1, A9=1), (A11=1)(cpu address) +static const u32 CHA_MRS_DLL_75[2] = { 0x00020020, 0x00000800 }; // with 75 ohm (A17=1, A5=1), (A11=1)(cpu address) + +// CPU(DRAM) +// { DLL: Enable. A17(BA0)=1 and A3(MA0)=0 } +// { DLL: reset. A11(MA8)=1 } +// +// DDR2 CL=2 CL=3 CL=4 CL=5 CL=6(Burst type=interleave)(WR fine tune in code) +static const u16 CHA_DDR2_MRS_table[5] = { 0x0150, 0x01D0, 0x0250, 0x02D0, 0x350 }; // BL=4 ;Use 1X-bandwidth MA table to init DRAM + +// MA11 MA10(AP) MA9 +#define CHA_MRS_DDR2_TWR2 (0 << 13) + (0 << 20) + (1 << 12) // Value = 001000h +#define CHA_MRS_DDR2_TWR3 (0 << 13) + (1 << 20) + (0 << 12) // Value = 100000h +#define CHA_MRS_DDR2_TWR4 (0 << 13) + (1 << 20) + (1 << 12) // Value = 101000h +#define CHA_MRS_DDR2_TWR5 (1 << 13) + (0 << 20) + (0 << 12) // Value = 002000h +#define CHA_MRS_DDR2_TWR6 (1 << 13) + (0 << 20) + (1 << 12) // Value = 003000h + +// DDR2 Twr=2 Twr=3 Twr=4 Twr=5 +static const u32 CHA_DDR2_Twr_table[5] = + { CHA_MRS_DDR2_TWR2, CHA_MRS_DDR2_TWR3, CHA_MRS_DDR2_TWR4, +CHA_MRS_DDR2_TWR5, CHA_MRS_DDR2_TWR6 }; + +#define CHA_OCD_Exit_150ohm 0x20200 // EMRS(1), BA0=1, MA9=MA8=MA7=0,MA6=1,MA2=0 (DRAM bus address) +// A17=1, A12=A11=A10=0,A9=1 ,A5=0 (CPU address) +#define CHA_OCD_Default_150ohm 0x21E00 // EMRS(1), BA0=1, MA9=MA8=MA7=1,MA6=1,MA2=0 (DRAM bus address) +// A17=1, A12=A11=A10=1,A9=1 ,A5=0 (CPU address) +#define CHA_OCD_Exit_75ohm 0x20020 // EMRS(1), BA0=1, MA9=MA8=MA7=0,MA6=0,MA2=1 (DRAM bus address) +// A17=1, A12=A11=A10=0,A9=0 ,A5=1 (CPU address) +#define CHA_OCD_Default_75ohm 0x21C20 // EMRS(1), BA0=1, MA9=MA8=MA7=1,MA6=0,MA2=1 (DRAM bus address) +// A17=1, A12=A11=A10=1,A9=0 ,A5=1 (CPU address) + +void InitDDR2CHA(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data; + u8 Reg6BVal; + u8 Idx, CL, BL, Twr; + u32 AccessAddr; + u8 DimmNum; + + // step2. + //disable bank paging and multi page + Data = pci_read_config8(MEMCTRL, 0x69); + Data &= ~0x03; + pci_write_config8(MEMCTRL, 0x69, Data); + + Reg6BVal = pci_read_config8(MEMCTRL, 0x6b); + Reg6BVal &= ~0x07; + // Step 3. + // At least one NOP cycle will be issued after the 1m sec device deselect. + Data = Reg6BVal | 0x01; + pci_write_config8(MEMCTRL, 0x6b, Data); + + // step4. + //Read a double word from any address of the DIMM + DimmRead(0x0); + + // Step 5. + // A minimum pause of 200u sec will be provided after the NOP. + // - <<< reduce BOOT UP time >>> - + // Loop 200us + for (Idx = 0; Idx < 0x10; Idx++) + WaitMicroSec(100); + + // Step 6. + // Precharge all (PALL) will be issued to the DDR. + Data = Reg6BVal | 0x02; + pci_write_config8(MEMCTRL, 0x6b, Data); + + // Step7. + //Read a double word from any address of the DIMM + DimmRead(0x0); + + // Step 8. + // MSR Eable will be issued to the DDR + Data = Reg6BVal | 0x03; + pci_write_config8(MEMCTRL, 0x6b, Data); + + + // Step 9,10. check ODT value for EMRS(1) command + // according to ODTLookUp_TBL in DrivingSetting.c if there is one dimm in MB's one channel , the DDR2's ODT is 150ohm + // if there is two dimm in MB's one channel, the DDR2's ODT is 75 ohm + DimmNum = DramAttr->DimmNumChA; + + if (DimmNum == 1) //DDR's ODT is 150ohm + { + AccessAddr = (u32) CHA_MRS_DLL_150[0]; + DimmRead(AccessAddr); //issue EMRS DLL Enable + PRINT_DEBUG_MEM("Step 9 Address "); + PRINT_DEBUG_MEM_HEX32(AccessAddr); + PRINT_DEBUG_MEM("\r"); + + AccessAddr = (u32) CHA_MRS_DLL_150[1]; + DimmRead(AccessAddr); //issue MRS DLL Reset + PRINT_DEBUG_MEM("Step 10 Address "); + PRINT_DEBUG_MEM_HEX32(AccessAddr); + PRINT_DEBUG_MEM("\r"); + } else if (DimmNum == 2) //DDR's ODT is 75ohm + { + AccessAddr = (u32) CHA_MRS_DLL_75[0]; + DimmRead(AccessAddr); //issue EMRS DLL Enable + AccessAddr = (u32) CHA_MRS_DLL_75[1]; + DimmRead(AccessAddr); //issue MRS DLL Reset + } else { + PRINT_DEBUG_MEM("Dimm NUM ERROR:"); + PRINT_DEBUG_MEM_HEX8(DimmNum); + PRINT_DEBUG_MEM("\r"); + } + + // Step 11. + // Precharge all (PALL) will be issued to the DDR. + Data = Reg6BVal | 0x02; + pci_write_config8(MEMCTRL, 0x6b, Data); + + // Step12. + //Read a double word from any address of the DIMM + DimmRead(0x0); + + // Step 13. + // Execute 8 CBR refresh + Data = Reg6BVal | 0x04; + pci_write_config8(MEMCTRL, 0x6b, Data); + + // issue 14,15 , 16 + //reads and wait 100us between each read + for (Idx = 0; Idx < 8; Idx++) { + DimmRead(0x0); + WaitMicroSec(100); + } + + // Step 17. + // enable MRS for MAA + Data = Reg6BVal | 0x03; + pci_write_config8(MEMCTRL, 0x6b, Data); + + //Step 18 + //the SDRAM parameters.(Burst Length, CAS# Latency , Write recovery etc.) + //------------------------------------------------------------- + //Burst Length : really offset Rx6c[3] + Data = pci_read_config8(MEMCTRL, 0x6c); + BL = (Data & 0x08) >> 3; + + // CL = really offset RX62[2:0] + Data = pci_read_config8(MEMCTRL, 0x62); + CL = Data & 0x03; + + AccessAddr = (u32) (CHA_DDR2_MRS_table[CL]); + if (BL) { + AccessAddr += 8; + } + //Write recovery : really offset Rx63[7-5] + Data = pci_read_config8(MEMCTRL, 0x63); + Twr = (Data & 0xE0) >> 5; + + AccessAddr += CHA_DDR2_Twr_table[Twr]; + // AccessAddr = 0x1012D8; + DimmRead(AccessAddr); // Set MRS command + PRINT_DEBUG_MEM("Step 18 Address"); + PRINT_DEBUG_MEM_HEX32(AccessAddr); + PRINT_DEBUG_MEM("\r"); + + //Step 19,20 + if (DimmNum == 1) //DDR's ODT is 150ohm + { + AccessAddr = (u32) CHA_OCD_Default_150ohm; + DimmRead(AccessAddr); //issue EMRS OCD Default + PRINT_DEBUG_MEM("Step 19 Address "); + PRINT_DEBUG_MEM_HEX32(AccessAddr); + PRINT_DEBUG_MEM("\r"); + + AccessAddr = (u32) CHA_OCD_Exit_150ohm; + DimmRead(AccessAddr); //issue EMRS OCD Calibration Mode Exit + PRINT_DEBUG_MEM("Step 20 Address "); + PRINT_DEBUG_MEM_HEX32(AccessAddr); + PRINT_DEBUG_MEM("\r"); + } else if (DimmNum == 2) //DDR's ODT is 75ohm + { + AccessAddr = (u32) CHA_OCD_Default_75ohm; + DimmRead(AccessAddr); //issue EMRS OCD Default + AccessAddr = (u32) CHA_OCD_Exit_75ohm; + DimmRead(AccessAddr); //issue EMRS OCD Calibration Mode Exit + } else { + PRINT_DEBUG_MEM("Dimm NUM ERROR: "); + PRINT_DEBUG_MEM_HEX8(DimmNum); + PRINT_DEBUG_MEM("\r"); + } + + //Step 21 + //After MRS the device should be ready for full functionality within 3 clocks + // after Tmrd is met. + Data = Reg6BVal; + pci_write_config8(MEMCTRL, 0x6b, Data); + + // Enable bank paging and multi page + Data = pci_read_config8(MEMCTRL, 0x69); + Data |= 0x03; + pci_write_config8(MEMCTRL, 0x69, Data); +} + +/*=================================================================== +Function : InitDDR2_CHB() +Precondition : +Input : + DramAttr: pointer point to DRAM_SYS_ATTR which consist the DDR and Dimm information + in MotherBoard +Output : Void +Purpose : Initialize DDR2 of CHB by standard sequence +Reference : +===================================================================*/ +/*// DLL: Enable Reset +static const u32 CHB_MRS_DLL_150[2] = { 0x00020200 | (1 << 20), 0x00000800 }; // with 150 ohm (A17=1, A9=1), (A11=1)(cpu address) +//u32 CHB_MRS_DLL_75[2] = { 0x00020020 | (1 << 20), 0x00000800 }; // with 75 ohm (A17=1, A5=1), (A11=1)(cpu address) +// CPU(DRAM) +// { DLL: Enable. A17(BA0)=1 and A3(MA0)=0 } +// { DLL: reset. A11(MA8)=1 } +// +// DDR2 CL=2 CL=3 CL=4 CL=5 (Burst type=interleave)(WR fine tune in code) +static const u16 CHB_DDR2_MRS_table[4] ={ 0x0150, 0x01D0, 0x0250, 0x02D0 }; // BL=4 ;Use 1X-bandwidth MA table to init DRAM + +// MA11 MA10(AP) MA9 +#define CHB_MRS_DDR2_TWR2 (0 << 13) + (0 << 20) + (1 << 12) // Value = 001000h +#define CHB_MRS_DDR2_TWR3 (0 << 13) + (1 << 20) + (0 << 12) // Value = 100000h +#define CHB_MRS_DDR2_TWR4 (0 << 13) + (1 << 20) + (1 << 12) // Value = 101000h +#define CHB_MRS_DDR2_TWR5 (1 << 13) + (0 << 20) + (0 << 12) // Value = 002000h +#define CHB_MRS_DDR2_TWR6 (1 << 13) + (0 << 20) + (1 << 12) // Value = 003000h + +// DDR2 Twr=2 Twr=3 Twr=4 Twr=5 +static const u32 CHB_DDR2_Twr_table[5] = { CHB_MRS_DDR2_TWR2, CHB_MRS_DDR2_TWR3, CHB_MRS_DDR2_TWR4, CHB_MRS_DDR2_TWR5, CHB_MRS_DDR2_TWR6 }; + +#define CHB_OCD_Exit_150ohm 0x20200 | (1 << 20) // EMRS(1), BA0=1, MA9=MA8=MA7=0,MA6=1,MA2=0 (DRAM bus address) +// A17=1, A12=A11=A10=0,A9=1 ,A5=0 (CPU address) +#define CHB_OCD_Default_150ohm 0x21E00 | (1 << 20) // EMRS(1), BA0=1, MA9=MA8=MA7=1,MA6=1,MA2=0 (DRAM bus address) +// A17=1, A12=A11=A10=1,A9=1 ,A5=0 (CPU address) +//#define CHB_OCD_Exit_75ohm 0x20020 | (1 << 20) // EMRS(1), BA0=1, MA9=MA8=MA7=0,MA6=0,MA2=1 (DRAM bus address) +// A17=1, A12=A11=A10=0,A9=0 ,A5=1 (CPU address) +//#define CHB_OCD_Default_75ohm 0x21C20 | (1 << 20) // EMRS(1), BA0=1, MA9=MA8=MA7=1,MA6=0,MA2=1 (DRAM bus address) +// A17=1, A12=A11=A10=1,A9=0 ,A5=1 (CPU address) +void InitDDR2CHB( + DRAM_SYS_ATTR *DramAttr + ) + +{ + u8 Data; + u8 Idx, CL, BL, Twr; + u32 AccessAddr; + + Data = 0x80; + pci_write_config8(MEMCTRL, 0x54, Data); + + // step3. + //disable bank paging and multi page + Data=pci_read_config8(MEMCTRL, 0x69); + Data &= ~0x03; + pci_write_config8(MEMCTRL, 0x69, Data); + + Data=pci_read_config8(MEMCTRL, 0xd3); + Data |= 0x80; + pci_write_config8(MEMCTRL, 0xd3, Data); + + //step 4. Initialize CHB begin + Data=pci_read_config8(MEMCTRL, 0xd3); + Data |= 0x40; + pci_write_config8(MEMCTRL, 0xd3, Data); + + //Step 5. NOP command enable + Data=pci_read_config8(MEMCTRL, 0xd7); + Data &= 0xC7; + Data |= 0x08; + pci_write_config8(MEMCTRL, 0xd7, Data); + + //Step 6. issue a nop cycle,RegD3[7] 0 -> 1 + Data=pci_read_config8(MEMCTRL, 0xd3); + Data &= 0x7F; + pci_write_config8(MEMCTRL, 0xd3, Data); + Data |= 0x80; + pci_write_config8(MEMCTRL, 0xd3, Data); + + + // Step 7. + // A minimum pause of 200u sec will be provided after the NOP. + // - <<< reduce BOOT UP time >>> - + // Loop 200us + for (Idx = 0; Idx < 0x10; Idx++) + WaitMicroSec(10); + + // Step 8. + // all banks precharge command enable + Data=pci_read_config8(MEMCTRL, 0xd7); + Data &= 0xC7; + Data |= 0x10; + pci_write_config8(MEMCTRL, 0xd7, Data); + + //step 9. issue a precharge all cycle,RegD3[7] 0 -> 1 + Data=pci_read_config8(MEMCTRL, 0xd3); + Data &= 0x7F; + pci_write_config8(MEMCTRL, 0xd3, Data); + Data |= 0x80; + pci_write_config8(MEMCTRL, 0xd3, Data); + + //step10. EMRS enable + Data=pci_read_config8(MEMCTRL, 0xd7); + Data &= 0xC7; + Data |= 0x18; + pci_write_config8(MEMCTRL, 0xd7, Data); + + Data=pci_read_config8(MEMCTRL, 0xd3); + Data &= 0xC7; + Data |= 0x08; + pci_write_config8(MEMCTRL, 0xd3, Data); + + //step11. EMRS DLL Enable and Disable DQS + AccessAddr = CHB_MRS_DLL_150[0] >> 3; + Data =(u8) (AccessAddr & 0xff); + pci_write_config8(MEMCTRL, 0xd9, Data); + + Data = (u8)((AccessAddr & 0xff00) >> 8); + pci_write_config8(MEMCTRL, 0xda, Data); + + Data=pci_read_config8(MEMCTRL, 0xd7); + Data &= 0xF9; + Data |= (u8)((AccessAddr & 0x30000) >> 15); + pci_write_config8(MEMCTRL, 0xd7, Data); + + //step12. issue EMRS cycle + Data=pci_read_config8(MEMCTRL, 0xd3); + Data &= 0x7F; + pci_write_config8(MEMCTRL, 0xd3, Data); + Data |= 0x80; + pci_write_config8(MEMCTRL, 0xd3, Data); + + //step13. MSR enable + Data=pci_read_config8(MEMCTRL, 0xd7); + Data &= 0xC7; + Data |= 0x18; + pci_write_config8(MEMCTRL, 0xd7, Data); + + Data=pci_read_config8(MEMCTRL, 0xd3); + Data &= 0xC7; + Data |= 0x00; + pci_write_config8(MEMCTRL, 0xd3, Data); + + + //step 14. MSR DLL Reset + AccessAddr = CHB_MRS_DLL_150[1] >> 3; + Data =(u8) (AccessAddr & 0xff); + pci_write_config8(MEMCTRL, 0xd9, Data); + + Data = (u8)((AccessAddr & 0xff00) >> 8); + pci_write_config8(MEMCTRL, 0xda, Data); + + Data=pci_read_config8(MEMCTRL, 0xd7); + Data &= 0xF9; + Data |= (u8)((AccessAddr & 0x30000) >> 15); + pci_write_config8(MEMCTRL, 0xd7, Data); + + //step15. issue MRS cycle + Data=pci_read_config8(MEMCTRL, 0xd3); + Data &= 0x7F; + pci_write_config8(MEMCTRL, 0xd3, Data); + Data |= 0x80; + pci_write_config8(MEMCTRL, 0xd3, Data); + + //clear the address + Data = 0x00; + pci_write_config8(MEMCTRL, 0xda, Data); + + //step16. all banks precharge command enable + Data=pci_read_config8(MEMCTRL, 0xd7); + Data &= 0xC7; + Data |= 0x10; + pci_write_config8(MEMCTRL, 0xd7, Data); + + + // step17. issue precharge all cycle + Data=pci_read_config8(MEMCTRL, 0xd3); + Data &= 0x7F; + pci_write_config8(MEMCTRL, 0xd3, Data); + Data |= 0x80; + pci_write_config8(MEMCTRL, 0xd3, Data); + + //step18. CBR cycle enable + Data=pci_read_config8(MEMCTRL, 0xd7); + Data &= 0xC7; + Data |= 0x20; + pci_write_config8(MEMCTRL, 0xd7, Data); + + //step 19.20.21 + //repeat issue 8 CBR cycle, between each cycle stop 100us + for (Idx = 0; Idx < 8; Idx++) + { + // issue CBR cycle + Data=pci_read_config8(MEMCTRL, 0xd3); + Data &= 0x7F; + pci_write_config8(MEMCTRL, 0xd3, Data); + Data |= 0x80; + pci_write_config8(MEMCTRL, 0xd3, Data); + + WaitMicroSec(200); + } + + //step22. MSR enable + Data=pci_read_config8(MEMCTRL, 0xd7); + Data &= 0xC7; + Data |= 0x18; + pci_write_config8(MEMCTRL, 0xd7, Data); + + Data=pci_read_config8(MEMCTRL, 0xd3); + Data &= 0xC7; + Data |= 0x00; + pci_write_config8(MEMCTRL, 0xd3, Data); + + + + //the SDRAM parameters.(Burst Length, CAS# Latency , Write recovery etc.) + //------------------------------------------------------------- + //Burst Length : really offset Rx6c[1] + Data=pci_read_config8(MEMCTRL, 0x6C); + BL = (Data & 0x02) >> 1; + + // CL = really offset RX62[2:0] + Data=pci_read_config8(MEMCTRL, 0x62); + CL = Data & 0x03; + + + AccessAddr = (u32)(CHB_DDR2_MRS_table[CL]); + if (BL) + { + AccessAddr += 8; + } + + //Write recovery : really offset Rx63[7:5] + Data=pci_read_config8(MEMCTRL, 0x63); + Twr = (Data & 0xE0) >> 5; + + AccessAddr += CHB_DDR2_Twr_table[Twr]; + //MSR Address use addr[20:3] + AccessAddr >>= 3; + + //step 23. MSR command + Data = (u8)(AccessAddr & 0xFF); + pci_write_config8(MEMCTRL, 0xD9, Data); + + Data = (u8)((AccessAddr & 0xFF00) >> 8); + pci_write_config8(MEMCTRL, 0xda, Data); + + Data=pci_read_config8(MEMCTRL, 0xd7); + Data &= 0xF9; + Data |= (u8)(((AccessAddr & 0x30000)>>16) << 1); + pci_write_config8(MEMCTRL, 0xd7, Data); + + //step 24. issue MRS cycle + Data=pci_read_config8(MEMCTRL, 0xd3); + Data &= 0x7F; + pci_write_config8(MEMCTRL, 0xd3, Data); + Data |= 0x80; + pci_write_config8(MEMCTRL, 0xd3, Data); + + //step 25. EMRS enable + Data=pci_read_config8(MEMCTRL, 0xd7); + Data &= 0xC7; + Data |= 0x18; + pci_write_config8(MEMCTRL, 0xd7, Data); + + Data=pci_read_config8(MEMCTRL, 0xd3); + Data &= 0xC7; + Data |= 0x08; + pci_write_config8(MEMCTRL, 0xd3, Data); + + + //step 26. OCD default + AccessAddr = (CHB_OCD_Default_150ohm) >> 3; + Data =(u8) (AccessAddr & 0xff); + pci_write_config8(MEMCTRL, 0xd9, Data); + + Data = (u8)((AccessAddr & 0xff00) >> 8); + pci_write_config8(MEMCTRL, 0xda, Data); + + Data=pci_read_config8(MEMCTRL, 0xd7); + Data &= 0xF9; + Data |= (u8)((AccessAddr & 0x30000) >> 15); + pci_write_config8(MEMCTRL, 0xd7, Data); + + + //step 27. issue EMRS cycle + Data=pci_read_config8(MEMCTRL, 0xd3); + Data &= 0x7F; + pci_write_config8(MEMCTRL, 0xd3, Data); + Data |= 0x80; + pci_write_config8(MEMCTRL, 0xd3, Data); + + //step 25. EMRS enable + Data=pci_read_config8(MEMCTRL, 0xd7); + Data &= 0xC7; + Data |= 0x18; + pci_write_config8(MEMCTRL, 0xd7, Data); + + Data=pci_read_config8(MEMCTRL, 0xd3); + Data &= 0xC7; + Data |= 0x08; + pci_write_config8(MEMCTRL, 0xd3, Data); + + //step 28. OCD Exit + AccessAddr = (CHB_OCD_Exit_150ohm) >> 3; + Data =(u8) (AccessAddr & 0xff); + pci_write_config8(MEMCTRL, 0xd9, Data); + + Data = (u8)((AccessAddr & 0xff00) >> 8); + pci_write_config8(MEMCTRL, 0xda, Data); + + Data=pci_read_config8(MEMCTRL, 0xd7); + Data &= 0xF9; + Data |= (u8)((AccessAddr & 0x30000) >> 15); + pci_write_config8(MEMCTRL, 0xd7, Data); + + //step 29. issue EMRS cycle + Data=pci_read_config8(MEMCTRL, 0xd3); + Data &= 0x7F; + pci_write_config8(MEMCTRL, 0xd3, Data); + Data |= 0x80; + pci_write_config8(MEMCTRL, 0xd3, Data); + + //clear all the address + Data = 0x00; + pci_write_config8(MEMCTRL, 0xd9, Data); + + Data = 0x00; + pci_write_config8(MEMCTRL, 0xda, Data); + + Data=pci_read_config8(MEMCTRL, 0xd7); + Data &= 0xF9; + pci_write_config8(MEMCTRL, 0xd7, Data); + + + //step 30. normal SDRAM Mode + Data=pci_read_config8(MEMCTRL, 0xd7); + Data &= 0xC7; + Data |= 0x00; + pci_write_config8(MEMCTRL, 0xd7, Data); + + Data=pci_read_config8(MEMCTRL, 0xd3); + Data &= 0xC7; + Data |= 0x00; + pci_write_config8(MEMCTRL, 0xd3, Data); + + //step 31. exit the initialization mode + Data=pci_read_config8(MEMCTRL, 0xd3); + Data &= 0xBF; + pci_write_config8(MEMCTRL, 0xd3, Data); + + + //step 32. Enable bank paging and multi page + Data=pci_read_config8(MEMCTRL, 0x69); + Data |= 0x03; + pci_write_config8(MEMCTRL, 0x69, Data); +} +*/ +/*=================================================================== +Function : InitDDR2CHC() +Precondition : +Input : + DramAttr: pointer point to DRAM_SYS_ATTR which consist the DDR and Dimm information + in MotherBoard +Output : Void +Purpose : Initialize DDR2 of CHC by standard sequence +Reference : +===================================================================*/ +// DDR2 CL=2 CL=3 CL=4 CL=5 (Burst type=interleave)(WR fine tune in code) +static const u16 CHC_MRS_table[4] = { 0x22B, 0x23B, 0x24B, 0x25B }; // Use 1X-bandwidth MA table to init DRAM + +void InitDDR2CHC(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data; + u8 Idx, CL, Twr; + u32 AccessAddr; + CB_STATUS Status; + + // step3. + //clear RxDF[2] to disable Tri-state output + Data = pci_read_config8(MEMCTRL, 0xdf); + Data &= 0xFB; + pci_write_config8(MEMCTRL, 0xdf, Data); + + + + //step 4. Enable the initialization mode of DRAM Controller C with NB's PLL clock + Data = pci_read_config8(MEMCTRL, 0xdb); + Data |= 0x60; + pci_write_config8(MEMCTRL, 0xdb, Data); + + //Step 5. NOP command enable + Data = pci_read_config8(MEMCTRL, 0xdb); + Data &= 0xE3; + Data |= 0x00; + pci_write_config8(MEMCTRL, 0xdb, Data); + + + //Step 6. issue a nop cycle,RegDB[1] 0 -> 1 + Data = pci_read_config8(MEMCTRL, 0xdb); + Data |= 0x2; + pci_write_config8(MEMCTRL, 0xdb, Data); + Data &= 0xFD; + pci_write_config8(MEMCTRL, 0xdb, Data); + + + // Step 7. + // A minimum pause of 200u sec will be provided after the NOP. + // - <<< reduce BOOT UP time >>> - + // Loop 200us + for (Idx = 0; Idx < 0x10; Idx++) + WaitMicroSec(100); + + // Step 8. + // signal bank precharge command enable + Data = pci_read_config8(MEMCTRL, 0xdb); + Data &= 0xE3; + Data |= 0x14; + pci_write_config8(MEMCTRL, 0xdb, Data); + + //set MA10 =1, precharge all bank + Data = 0x00; + pci_write_config8(MEMCTRL, 0xf8, Data); + + + Data = 0x04; + pci_write_config8(MEMCTRL, 0xf9, Data); + + //step 9. issue a precharge all cycle,RegD3[7] 0 -> 1 + Data = pci_read_config8(MEMCTRL, 0xdb); + Data |= 0x2; + pci_write_config8(MEMCTRL, 0xdb, Data); + Data &= 0xFD; + pci_write_config8(MEMCTRL, 0xdb, Data); + + //step10. MRS enable + Data = pci_read_config8(MEMCTRL, 0xdb); + Data &= 0xE3; + Data |= 0x1C; + pci_write_config8(MEMCTRL, 0xdb, Data); + + + //step11. EMRS DLL enable and Disable DQS + Data = 0x40; + pci_write_config8(MEMCTRL, 0xf8, Data); + + Data = 0x24; + pci_write_config8(MEMCTRL, 0xf9, Data); + + //step12. issue EMRS cycle + Data = pci_read_config8(MEMCTRL, 0xdb); + Data |= 0x2; + pci_write_config8(MEMCTRL, 0xdb, Data); + Data &= 0xFD; + pci_write_config8(MEMCTRL, 0xdb, Data); + + //step13. MSR enable + Data = pci_read_config8(MEMCTRL, 0xdb); + Data &= 0xE3; + Data |= 0x1C; + pci_write_config8(MEMCTRL, 0xdb, Data); + + //step 14. MSR DLL Reset + Data = 0x00; + pci_write_config8(MEMCTRL, 0xf8, Data); + + Data = 0x01; + pci_write_config8(MEMCTRL, 0xf9, Data); + + //step15. issue MRS cycle + Data = pci_read_config8(MEMCTRL, 0xdb); + Data |= 0x2; + pci_write_config8(MEMCTRL, 0xdb, Data); + Data &= 0xFD; + pci_write_config8(MEMCTRL, 0xdb, Data); + + //step16. signal banks precharge command enable + Data = pci_read_config8(MEMCTRL, 0xdb); + Data &= 0xE3; + Data |= 0x14; + pci_write_config8(MEMCTRL, 0xdb, Data); + + //set MA10 =1, precharge all bank + Data = 0x00; + pci_write_config8(MEMCTRL, 0xf8, Data); + + Data = 0x04; + pci_write_config8(MEMCTRL, 0xf9, Data); + + // step17. issue precharge all cycle + Data = pci_read_config8(MEMCTRL, 0xdb); + Data |= 0x2; + pci_write_config8(MEMCTRL, 0xdb, Data); + Data &= 0xFD; + pci_write_config8(MEMCTRL, 0xdb, Data); + + //step18. CBR cycle enable + Data = pci_read_config8(MEMCTRL, 0xdb); + Data &= 0xE3; + Data |= 0x18; + pci_write_config8(MEMCTRL, 0xdb, Data); + + Data = 0x00; + pci_write_config8(MEMCTRL, 0xf8, Data); + + Data = 0x00; + pci_write_config8(MEMCTRL, 0xf9, Data); + + //step 19.20.21 + //repeat issue 8 CBR cycle, between each cycle stop 100us + for (Idx = 0; Idx < 8; Idx++) { + // issue CBR cycle + Data = pci_read_config8(MEMCTRL, 0xdb); + Data |= 0x2; + pci_write_config8(MEMCTRL, 0xdb, Data); + Data &= 0xFD; + pci_write_config8(MEMCTRL, 0xdb, Data); + WaitMicroSec(100); + } + + //the SDRAM parameters.(, CAS# Latency , Write recovery etc.) + //------------------------------------------------------------ + + // CL = really offset RXDC[7:6] + Data = pci_read_config8(MEMCTRL, 0xdc); + CL = (Data & 0xC0) >> 6; + + AccessAddr = (u32) (CHC_MRS_table[CL]); + + //Write recovery : really offset Rx63[7:5] + Data = pci_read_config8(MEMCTRL, 0x63); + Twr = (Data & 0xE0) >> 5; + + AccessAddr += Twr * 0x200; + + //step22. MSR enable + Data = pci_read_config8(MEMCTRL, 0xdb); + Data &= 0xE3; + Data |= 0x1C; + pci_write_config8(MEMCTRL, 0xdb, Data); + + //step 23. MSR command + Data = (u8) (AccessAddr & 0xFF); + pci_write_config8(MEMCTRL, 0xf8, Data); + + Data = (u8) ((AccessAddr & 0xFF00) >> 8); + pci_write_config8(MEMCTRL, 0xf9, Data); + + //step 24. issue MRS cycle + Data = pci_read_config8(MEMCTRL, 0xdb); + Data |= 0x2; + pci_write_config8(MEMCTRL, 0xdb, Data); + Data &= 0xFD; + pci_write_config8(MEMCTRL, 0xdb, Data); + + //step 25. EMRS enable + Data = pci_read_config8(MEMCTRL, 0xdb); + Data &= 0xE3; + Data |= 0x1C; + pci_write_config8(MEMCTRL, 0xdb, Data); + + + //step 26. OCD default + Data = 0xC0; + pci_write_config8(MEMCTRL, 0xf8, Data); + + Data = 0x27; + pci_write_config8(MEMCTRL, 0xf9, Data); + + //step 27. issue EMRS cycle + Data = pci_read_config8(MEMCTRL, 0xdb); + Data |= 0x2; + pci_write_config8(MEMCTRL, 0xdb, Data); + Data &= 0xFD; + pci_write_config8(MEMCTRL, 0xdb, Data); + + //step 28. OCD Exit + Data = 0x40; + pci_write_config8(MEMCTRL, 0xf8, Data); + + Data = 0x24; + pci_write_config8(MEMCTRL, 0xf9, Data); + + + //step 29. issue EMRS cycle + Data = pci_read_config8(MEMCTRL, 0xdb); + Data |= 0x2; + pci_write_config8(MEMCTRL, 0xdb, Data); + Data &= 0xFD; + pci_write_config8(MEMCTRL, 0xdb, Data); + + Status = VerifyChc(); + if (Status != CB_SUCCESS) + PRINT_DEBUG_MEM("Error!!!!CHC init error!\r"); + //step 31. exit the initialization mode + Data = pci_read_config8(MEMCTRL, 0xdb); + Data &= 0x9F; + pci_write_config8(MEMCTRL, 0xdb, Data); +} + +CB_STATUS VerifyChc() +{ + u8 Data, ByteVal, Index, pad; + u16 row; + + //first write the pad to all the address + + //the row bits is 13 and rank bit is 2, so the address bits is 15 and the value is 0x7fff + //verify each MA[0:12],BA[0:1] + pad = 1; + for (row = 0; row < 0x8000; row++) { + //set the write value; + //verify each MD[15:0] + for (Data = pad, Index = 0; Index < 16; Index++) { + Data <<= 1; + if (Data == 0) + Data = 1; + pci_write_config8(PCI_DEV(0, 0, 7), 0xC0 + Index, + Data); + + } + + //issue the bank active command + // bank active command enable + Data = pci_read_config8(MEMCTRL, 0xdb); + Data &= 0xE3; + Data |= 0x10; + pci_write_config8(MEMCTRL, 0xdb, Data); + + Data = (u8) (row && 0xFF); + pci_write_config8(MEMCTRL, 0xf8, Data); + + Data = (u8) ((row && 0xFF) >> 8); + pci_write_config8(MEMCTRL, 0xf9, Data); + + // issue active cycle + Data = pci_read_config8(MEMCTRL, 0xdb); + Data |= 0x2; + pci_write_config8(MEMCTRL, 0xdb, Data); + Data &= 0xFD; + pci_write_config8(MEMCTRL, 0xdb, Data); + + //issue ready/completion for read/write + // read/completion command enable + Data = pci_read_config8(MEMCTRL, 0xdb); + Data &= 0xE3; + Data |= 0x04; + pci_write_config8(MEMCTRL, 0xdb, Data); + + Data = 0x00; + pci_write_config8(MEMCTRL, 0xf8, Data); + + Data = 0x00; + pci_write_config8(MEMCTRL, 0xf9, Data); + + // issue read/completion cycle + Data = pci_read_config8(MEMCTRL, 0xdb); + Data |= 0x2; + pci_write_config8(MEMCTRL, 0xdb, Data); + Data &= 0xFD; + pci_write_config8(MEMCTRL, 0xdb, Data); + + //issue write command + // write command enable + Data = pci_read_config8(MEMCTRL, 0xdb); + Data &= 0xE3; + Data |= 0x0C; + pci_write_config8(MEMCTRL, 0xdb, Data); + + Data = 0x00; + pci_write_config8(MEMCTRL, 0xf8, Data); + + Data = (u8) ((row & 0x60) << 5); + pci_write_config8(MEMCTRL, 0xf9, Data); + + // issue write cycle + Data = pci_read_config8(MEMCTRL, 0xdb); + Data |= 0x2; + pci_write_config8(MEMCTRL, 0xdb, Data); + Data &= 0xFD; + pci_write_config8(MEMCTRL, 0xdb, Data); + + ////issue ready/completion for read/write + // read/completion command enable + Data = pci_read_config8(MEMCTRL, 0xdb); + Data &= 0xE3; + Data |= 0x04; + pci_write_config8(MEMCTRL, 0xdb, Data); + + Data = 0x00; + pci_write_config8(MEMCTRL, 0xf8, Data); + + Data = 0x00; + pci_write_config8(MEMCTRL, 0xf9, Data); + + // issue read/completion cycle + Data = pci_read_config8(MEMCTRL, 0xdb); + Data |= 0x2; + pci_write_config8(MEMCTRL, 0xdb, Data); + Data &= 0xFD; + pci_write_config8(MEMCTRL, 0xdb, Data); + + //issue the bank active command + // bank active command enable + Data = pci_read_config8(MEMCTRL, 0xdb); + Data &= 0xE3; + Data |= 0x10; + pci_write_config8(MEMCTRL, 0xdb, Data); + + Data = (u8) (row && 0xFF); + pci_write_config8(MEMCTRL, 0xf8, Data); + + Data = (u8) ((row && 0xFF) >> 8); + pci_write_config8(MEMCTRL, 0xf9, Data); + + // issue active cycle + Data = pci_read_config8(MEMCTRL, 0xdb); + Data |= 0x2; + pci_write_config8(MEMCTRL, 0xdb, Data); + Data &= 0xFD; + pci_write_config8(MEMCTRL, 0xdb, Data); + + ////issue ready/completion for read/write + // read/completion command enable + Data = pci_read_config8(MEMCTRL, 0xdb); + Data &= 0xE3; + Data |= 0x04; + pci_write_config8(MEMCTRL, 0xdb, Data); + + Data = 0x00; + pci_write_config8(MEMCTRL, 0xf8, Data); + + Data = 0x00; + pci_write_config8(MEMCTRL, 0xf9, Data); + + // issue read/completion cycle + Data = pci_read_config8(MEMCTRL, 0xdb); + Data |= 0x2; + pci_write_config8(MEMCTRL, 0xdb, Data); + Data &= 0xFD; + pci_write_config8(MEMCTRL, 0xdb, Data); + + ////issue read command + // read/completion command enable + Data = pci_read_config8(MEMCTRL, 0xdb); + Data &= 0xE3; + Data |= 0x08; + pci_write_config8(MEMCTRL, 0xdb, Data); + + Data = 0x00; + pci_write_config8(MEMCTRL, 0xf8, Data); + + Data = (u8) ((row & 0x60) << 5); + pci_write_config8(MEMCTRL, 0xf9, Data); + + // issue read cycle + Data = pci_read_config8(MEMCTRL, 0xdb); + Data |= 0x2; + pci_write_config8(MEMCTRL, 0xdb, Data); + Data &= 0xFD; + pci_write_config8(MEMCTRL, 0xdb, Data); + + ////issue ready/completion for read/write + // read/completion command enable + Data = pci_read_config8(MEMCTRL, 0xdb); + Data &= 0xE3; + Data |= 0x04; + pci_write_config8(MEMCTRL, 0xdb, Data); + + Data = 0x00; + pci_write_config8(MEMCTRL, 0xf8, Data); + + Data = 0x00; + pci_write_config8(MEMCTRL, 0xf9, Data); + + // issue read/completion cycle + Data = pci_read_config8(MEMCTRL, 0xdb); + Data |= 0x2; + pci_write_config8(MEMCTRL, 0xdb, Data); + Data &= 0xFD; + pci_write_config8(MEMCTRL, 0xdb, Data); + + //verify the value; + for (ByteVal = pad, Index = 0; Index < 16; Index++) { + Data = + pci_read_config8(PCI_DEV(0, 0, 7), + 0xD0 + Index); + if (ByteVal != Data) { + PRINT_DEBUG_MEM + ("error!!!! row = %x,Index =%x,Data = %x,ByteVal=%x\r"); + } + ByteVal <<= 1; + if (ByteVal == 0) + ByteVal = 1; + } + pad <<= 1; + if (pad == 0) + pad = 1; + } + + return CB_SUCCESS; +}
Added: trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/DrivingSetting.c =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/DrivingSetting.c (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/DrivingSetting.c 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,396 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + Driving setting: ODT/DQS/DQ/CS/MAA/MAB/DCLK + */ + +void DrivingODT(DRAM_SYS_ATTR * DramAttr); + +void DrivingDQS(DRAM_SYS_ATTR * DramAttr); + +void DrivingDQ(DRAM_SYS_ATTR * DramAttr); + +void DrivingCS(DRAM_SYS_ATTR * DramAttr); + +void DrivingMA(DRAM_SYS_ATTR * DramAttr); + +void DrivingDCLK(DRAM_SYS_ATTR * DramAttr); + +/* DRAM Driving Adjustment*/ +void DRAMDriving(DRAM_SYS_ATTR * DramAttr) +{ + PRINT_DEBUG_MEM("set ODT!\r"); + DrivingODT(DramAttr); + + PRINT_DEBUG_MEM("set DQS!\r"); + DrivingDQS(DramAttr); + + PRINT_DEBUG_MEM(("set DQ!\r")); + DrivingDQ(DramAttr); + + PRINT_DEBUG_MEM("set CS!\r"); + DrivingCS(DramAttr); + + PRINT_DEBUG_MEM("set MAA!\r"); + DrivingMA(DramAttr); + + PRINT_DEBUG_MEM("set DCLK!\r"); + DrivingDCLK(DramAttr); +} + + +/* +ODT Control for DQ/DQS/CKE/SCMD/DCLKO in ChA & ChB +which include driving enable/range and strong/weak selection + +Processing: According to DRAM frequency to ODT control bits. + Because function enable bit must be the last one to be set. + So the register VIA_NB3DRAM_REGD4 and VIA_NB3DRAM_REGD3 should be + the last register to be programmed. +*/ +//------------------------------------------------------------------------------- +// ODT Lookup Table +//------------------------------------------------------------------------------- +#define Rank0_ODT 0 +#define Rank1_ODT 1 +#define Rank2_ODT 2 +#define Rank3_ODT 3 +#define NA_ODT 0 +#define NB_ODT_75ohm 0 +#define NB_ODT_150ohm 1 + +#define DDR2_ODT_75ohm 0x20 +#define DDR2_ODT_150ohm 0x40 + +// Setting of ODT Lookup TBL +// RankMAP , Rank 3 Rank 2 Rank 1 Rank 0 , DRAM & NB ODT setting +// db 0000b , Reserved +#define ODTLookup_Tbl_count 8 +static const u8 ODTLookup_TBL[ODTLookup_Tbl_count][3] = { + // 0001b + {0x01, + (Rank3_ODT << 6) + (Rank2_ODT << 4) + (Rank1_ODT << 2) + + Rank0_ODT, DDR2_ODT_150ohm + NB_ODT_75ohm}, + // 0010b , Reserved + // 0011b + {0x03, + (Rank3_ODT << 6) + (Rank2_ODT << 4) + (Rank0_ODT << 2) + + Rank1_ODT, DDR2_ODT_150ohm + NB_ODT_75ohm}, + // 0100b + {0x04, + (Rank3_ODT << 6) + (Rank2_ODT << 4) + (Rank1_ODT << 2) + + Rank0_ODT, DDR2_ODT_150ohm + NB_ODT_75ohm}, + // 0101b + {0x05, + (Rank3_ODT << 6) + (Rank0_ODT << 4) + (Rank1_ODT << 2) + + Rank2_ODT, DDR2_ODT_75ohm + NB_ODT_150ohm}, + // 0110b , Reserved + // 0111b + {0x07, + (Rank3_ODT << 6) + (Rank0_ODT << 4) + (Rank2_ODT << 2) + + Rank2_ODT, DDR2_ODT_75ohm + NB_ODT_150ohm}, + // 1000b , Reserved + // 1001b , Reserved + // 1010b , Reserved + // 1011b , Reserved + // 1100b + {0x0c, + (Rank2_ODT << 6) + (Rank3_ODT << 4) + (Rank1_ODT << 2) + + Rank0_ODT, DDR2_ODT_150ohm + NB_ODT_75ohm}, + // 1101b + {0x0d, + (Rank0_ODT << 6) + (Rank0_ODT << 4) + (Rank1_ODT << 2) + + Rank2_ODT, DDR2_ODT_75ohm + NB_ODT_150ohm}, + // 1110b , Reserved + // 1111b + {0x0f, + (Rank0_ODT << 6) + (Rank0_ODT << 4) + (Rank2_ODT << 2) + + Rank2_ODT, DDR2_ODT_75ohm + NB_ODT_150ohm} +}; + +#define ODT_Table_Width_DDR2 4 +// RxD6 RxD3 +static const u8 ODT_Control_DDR2[ODT_Table_Width_DDR2] = { 0xFC, 0x01 }; + +void DrivingODT(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data; + u8 i; + BOOLEAN bFound; + + pci_write_config8(MEMCTRL, 0xD0, 0x88); + + Data = ODT_Control_DDR2[0]; + pci_write_config8(MEMCTRL, 0xd6, Data); + + Data = ODT_Control_DDR2[1]; + pci_write_config8(MEMCTRL, 0xd3, Data); + + Data = pci_read_config8(MEMCTRL, 0x9e); + //set MD turn_around wait state + Data &= 0xCF; /*clear bit4,5 */ + if (DIMMFREQ_400 == DramAttr->DramFreq) + Data |= 0x0; + else if (DIMMFREQ_533 == DramAttr->DramFreq) + Data |= 0x10; + else if (DIMMFREQ_667 == DramAttr->DramFreq) + Data |= 0x20; + else if (DIMMFREQ_800 == DramAttr->DramFreq) + Data |= 0x20; + else + Data |= 0; + pci_write_config8(MEMCTRL, 0x9e, Data); + + + if (DIMMFREQ_400 == DramAttr->DramFreq) + Data = 0x0; + else if (DIMMFREQ_533 == DramAttr->DramFreq) + Data = 0x11; + else if (DIMMFREQ_667 == DramAttr->DramFreq) + Data = 0x11; + else if (DIMMFREQ_800 == DramAttr->DramFreq) + Data = 0x11; + else + Data = 0; + pci_write_config8(MEMCTRL, 0x9f, Data); + + + /*channel A ODT select */ + if (DramAttr->DimmNumChA > 0) { + Data = pci_read_config8(MEMCTRL, 0xd5); + Data &= 0x5F; /*clear bit7,5 */ + if (DramAttr->RankNumChA > 2) + Data |= 0xA0; /*if rank number > 2 (3or4), set bit7,5 */ + else + Data |= 0x00; /*if rank number is 1or2, clear bit5 */ + pci_write_config8(MEMCTRL, 0xd5, Data); + + Data = pci_read_config8(MEMCTRL, 0xd7); + Data &= 0xEF; /*clear bit7 */ + if (DramAttr->RankNumChA > 2) + Data |= 0x80; /*if rank number > 2 (3or4), set bit7 */ + else + Data |= 0x00; /*if rank number is 1or2, clear bit7 */ + pci_write_config8(MEMCTRL, 0xd7, Data); + + + /*channel A */ + Data = pci_read_config8(MEMCTRL, 0xd5); + Data &= 0xF3; //bit2,3 + if (DramAttr->DimmNumChA == 2) /*2 Dimm, 3or4 Ranks */ + Data |= 0x00; + else if (DramAttr->DimmNumChA == 1) + Data |= 0x04; + pci_write_config8(MEMCTRL, 0xd5, Data); + + if ((DramAttr->RankPresentMap & 0x0F) != 0) { /*channel A */ + // MAA ODT Lookup Table + bFound = FALSE; + for (i = 0; i < ODTLookup_Tbl_count; i++) { + if ((DramAttr->RankPresentMap & 0x0F) == + ODTLookup_TBL[i][0]) { + Data = ODTLookup_TBL[i][1]; + bFound = TRUE; + } + } + if (!bFound) { /*set default value */ + Data = + ODTLookup_TBL[ODTLookup_Tbl_count - + 1][1]; + } + pci_write_config8(MEMCTRL, 0x9c, Data); + + + //set CHA MD ODT control State Dynamic-on + Data = pci_read_config8(MEMCTRL, 0xD4); + Data &= 0xC9; + Data |= 0x30; + pci_write_config8(MEMCTRL, 0xD4, Data); + + Data = pci_read_config8(MEMCTRL, 0x9e); + Data |= 0x01; + pci_write_config8(MEMCTRL, 0x9e, Data); + } + + } + /*channel B */ + if (1 == ENABLE_CHC) { + //CHB has not auto compensation mode ,so must set it manual,or else CHB initialization will not successful + // Data =0x88; + //pci_write_config8(MEMCTRL, 0xd0, Data); + + Data = pci_read_config8(MEMCTRL, 0xd5); + Data &= 0xAF; + if (DramAttr->RankNumChB > 2) /*rank number 3 or 4 */ + Data |= 0x50; + else + Data |= 0x00; + pci_write_config8(MEMCTRL, 0xd5, Data); + + Data = pci_read_config8(MEMCTRL, 0xd7); + Data &= 0xBF; /*clear bit6 */ + if (DramAttr->RankNumChB > 2) + Data |= 0x40; /*if rank number > 2 (3or4), set bit7 */ + else + Data |= 0x00; /*if rank number is 1or2, clear bit7 */ + pci_write_config8(MEMCTRL, 0xd7, Data); + + + Data = pci_read_config8(MEMCTRL, 0xd5); + Data &= 0xFC; + if (DramAttr->DimmNumChB == 2) /*2 Dimm, 3or4 Ranks */ + Data |= 0x00; // 2 dimm RxD5[2,0]=0,0b + else if (DramAttr->DimmNumChB == 1) + Data |= 0x01; // 1 dimm RxD5[2,0]=1,1b + pci_write_config8(MEMCTRL, 0xd5, Data); + + //set CHB MD ODT control State Dynamic-on + Data = pci_read_config8(MEMCTRL, 0xD4); + Data &= 0xF6; + Data |= 0x08; + pci_write_config8(MEMCTRL, 0xD4, Data); + + + //enable CHB differential DQS input + Data = pci_read_config8(MEMCTRL, 0x9E); + Data |= 0x02; + pci_write_config8(MEMCTRL, 0x9E, Data); + } + //enable ODT Control + Data = pci_read_config8(MEMCTRL, 0x9e); + Data |= 0x80; + pci_write_config8(MEMCTRL, 0x9e, Data); +} + +void DrivingDQS(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data; + + /*channel A */ + if (DramAttr->RankNumChA > 0) { + Data = DDR2_DQSA_Driving_Table[DramAttr->RankNumChA - 1]; + pci_write_config8(MEMCTRL, 0xe0, Data); + } + + /*channel B */ + if (1 == ENABLE_CHC) { + Data = DDR2_DQSB_Driving_Table[DramAttr->RankNumChB - 1]; + pci_write_config8(MEMCTRL, 0xe1, Data); + } + +} + +void DrivingDQ(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data; + + /*channel A */ + if (DramAttr->RankNumChA > 0) { + Data = DDR2_DQA_Driving_Table[DramAttr->RankNumChA - 1]; + pci_write_config8(MEMCTRL, 0xe2, Data); + + } + /*channel B */ + if (1 == ENABLE_CHC) { + Data = DDR2_DQB_Driving_Table[DramAttr->RankNumChB - 1]; + pci_write_config8(MEMCTRL, 0xe3, Data); + } +} + +void DrivingCS(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data; + /*Channel A */ + if (DramAttr->RankNumChA > 0) { + Data = DDR2_CSA_Driving_Table_x8[DramAttr->RankNumChA - 1]; + pci_write_config8(MEMCTRL, 0xe4, Data); + } + /*channel B */ + if (1 == ENABLE_CHC) { + Data = DDR2_CSB_Driving_Table_x8[DramAttr->RankNumChB - 1]; + pci_write_config8(MEMCTRL, 0xe5, Data); + } +} + +void DrivingMA(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data; + u8 i, FreqId; + + if (DramAttr->RankNumChA > 0) { + if (DIMMFREQ_400 == DramAttr->DramFreq) + FreqId = 1; + else if (DIMMFREQ_533 == DramAttr->DramFreq) + FreqId = 2; + else if (DIMMFREQ_667 == DramAttr->DramFreq) + FreqId = 3; + else if (DIMMFREQ_800 == DramAttr->DramFreq) + FreqId = 4; + else + FreqId = 1; + for (i = 0; i < MA_Table; i++) { + if (DramAttr->LoadNumChA <= + DDR2_MAA_Driving_Table[i][0]) { + Data = DDR2_MAA_Driving_Table[i][FreqId]; + break; + } + } + pci_write_config8(MEMCTRL, 0xe8, Data); + } + if (1 == ENABLE_CHC) { + for (i = 0; i < MA_Table; i++) { + if (DramAttr->LoadNumChA <= + DDR2_MAB_Driving_Table[i][0]) { + Data = DDR2_MAB_Driving_Table[i][1]; + break; + } + } + pci_write_config8(MEMCTRL, 0xe9, Data); + } +} + +void DrivingDCLK(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data; + u8 FreqId; + + if (DIMMFREQ_400 == DramAttr->DramFreq) + FreqId = 0; + else if (DIMMFREQ_533 == DramAttr->DramFreq) + FreqId = 1; + else if (DIMMFREQ_667 == DramAttr->DramFreq) + FreqId = 2; + else if (DIMMFREQ_800 == DramAttr->DramFreq) + FreqId = 4; + else + FreqId = 0; + + /*channel A */ + if (DramAttr->RankNumChA > 0) { + Data = DDR2_DCLKA_Driving_Table[FreqId]; + pci_write_config8(MEMCTRL, 0xe6, Data); + } + /*channel B */ + if (1 == ENABLE_CHC) { + Data = DDR2_DCLKB_Driving_Table[FreqId]; + pci_write_config8(MEMCTRL, 0xe7, Data); + } + +}
Added: trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/FinalSetting.c =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/FinalSetting.c (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/FinalSetting.c 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,129 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +static const u8 RefreshCounter[7][2] = { + //Non_256Mbit, 256Mbit + {0xCA, 0xA8}, // DRAM400 + {0xCA, 0xA8}, // DRAM333 + {0xCA, 0x86}, // DRAM266 + {0xCA, 0x65}, // DRAM200 + {0xA8, 0x54}, // DRAM166 + {0x86, 0x43}, // DRAM133 + {0x65, 0x32} // DRAM100 +}; + +void DRAMRefreshCounter(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data; + u8 Freq = 5, i, Dram_256_Mb; + if (DramAttr->DramFreq == DIMMFREQ_800) + Freq = 0; + else if (DramAttr->DramFreq == DIMMFREQ_667) + Freq = 1; + else if (DramAttr->DramFreq == DIMMFREQ_533) + Freq = 2; + else if (DramAttr->DramFreq == DIMMFREQ_400) + Freq = 3; + else if (DramAttr->DramFreq == DIMMFREQ_333) + Freq = 4; + else if (DramAttr->DramFreq == DIMMFREQ_266) + Freq = 5; + else if (DramAttr->DramFreq == DIMMFREQ_200) + Freq = 6; + else + Freq = 6; + + Dram_256_Mb = 0; + for (i = 0; i < MAX_SOCKETS; i++) { + if (DramAttr->DimmInfo[i].SPDDataBuf[SPD_SDRAM_ROW_ADDR] == + 13) { + Dram_256_Mb = 1; + break; + } + } + + Data = RefreshCounter[Freq][Dram_256_Mb]; + + pci_write_config8(MEMCTRL, 0x6a, Data); +} + + +/*=================================================================== +Function : DRAMRegFinalValue() +Precondition : +Input : + DramAttr: pointer point to DRAM_SYS_ATTR which consist the DDR and Dimm information + in MotherBoard +Output : Void +Purpose : Chipset Performance UP and other setting after DRAM Sizing + Turn on register directly to promote performance +===================================================================*/ + +//-------------------------------------------------------------------------- +// register AND OR +//-------------------------------------------------------------------------- +#define DRAM_table_item 9 +static const u8 DRAM_table[DRAM_table_item][3] = { + {0x60, 0xff, 0xD0}, + {0x66, 0xcf, 0x80}, // DRAMC queue > 2 + {0x69, 0xff, 0x07}, // Enable multiple page + {0x95, 0x00, 0x0D}, + {0x96, 0x0F, 0xA0}, + {0xFB, 0x00, 0x3E}, + {0xFD, 0x00, 0xA9}, + {0xFE, 0x00, 0x0f}, + {0xFF, 0x00, 0x3D} +}; + +#define PM_table_item 5 +static const u8 PM_table[PM_table_item][3] = { + {0xA0, 0x0F, 0xF0}, + {0xA1, 0x1F, 0xE0}, + {0xA2, 0x00, 0xFE}, + {0xA3, 0x7F, 0x80}, + {0xA5, 0x7E, 0x81}, +}; + +void DRAMRegFinalValue(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data; + u8 i; + + for (i = 0; i < DRAM_table_item; i++) { + Data = pci_read_config8(MEMCTRL, DRAM_table[i][0]); + Data = (u8) ((Data & DRAM_table[i][1]) | DRAM_table[i][2]); + pci_write_config8(MEMCTRL, DRAM_table[i][0], Data); + } + + //enable dram By-Rank self refresh + Data = pci_read_config8(MEMCTRL, 0x96); + Data &= 0xF0; + for (i = 0x01; i < 0x10; i = i << 1) { + if ((DramAttr->RankPresentMap & i) != 0x00) + Data |= i; + } + pci_write_config8(MEMCTRL, 0x96, Data); + + for (i = 0; i < PM_table_item; i++) { + Data = pci_read_config8(PCI_DEV(0, 0, 4), PM_table[i][0]); + Data = (u8) ((Data & PM_table[i][1]) | PM_table[i][2]); + pci_write_config8(PCI_DEV(0, 0, 4), PM_table[i][0], Data); + } + +}
Added: trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/FreqSetting.c =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/FreqSetting.c (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/FreqSetting.c 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,235 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +void CalcCLAndFreq(DRAM_SYS_ATTR * DramAttr); + +/* + Set DRAM Frequency +*/ +void DRAMFreqSetting(DRAM_SYS_ATTR * DramAttr) +{ + + u8 Data = 0; + + PRINT_DEBUG_MEM("Dram Frequency setting \r"); + + //calculate dram frequency using SPD data + CalcCLAndFreq(DramAttr); + + //init some Dramc control by Simon Chu slide + //Must use "CPU delay" to make sure VLINK is dis-connect + Data = pci_read_config8(PCI_DEV(0, 0, 7), 0x47); + Data = (u8) (Data | 0x04); + pci_write_config8(PCI_DEV(0, 0, 7), 0x47, Data); + + //in order to make sure NB command buffer don`t have pending request(C2P cycle) + //CPU DELAY + WaitMicroSec(20); + + //Before Set Dram Frequency, we must set 111 by Simon Chu slide. + Data = pci_read_config8(MEMCTRL, 0x90); + Data = (u8) ((Data & 0xf8) | 7); + pci_write_config8(MEMCTRL, 0x90, Data); + + WaitMicroSec(20); + + //Set Dram Frequency. + Data = pci_read_config8(MEMCTRL, 0x90); + switch (DramAttr->DramFreq) { + case DIMMFREQ_400: + Data = (u8) ((Data & 0xf8) | 3); + break; + case DIMMFREQ_533: + Data = (u8) ((Data & 0xf8) | 4); + break; + case DIMMFREQ_667: + Data = (u8) ((Data & 0xf8) | 5); + break; + case DIMMFREQ_800: + Data = (u8) ((Data & 0xf8) | 6); + break; + default: + Data = (u8) ((Data & 0xf8) | 1);; + } + pci_write_config8(MEMCTRL, 0x90, Data); + + //CPU Delay + WaitMicroSec(20); + + // Manual reset and adjust DLL when DRAM change frequency + Data = pci_read_config8(MEMCTRL, 0x6B); + Data = (u8) ((Data & 0x2f) | 0xC0); + pci_write_config8(MEMCTRL, 0x6B, Data); + + //CPU Delay + WaitMicroSec(20); + + Data = pci_read_config8(MEMCTRL, 0x6B); + Data = (u8) (Data | 0x10); + pci_write_config8(MEMCTRL, 0x6B, Data); + + //CPU Delay + WaitMicroSec(20); + + Data = pci_read_config8(MEMCTRL, 0x6B); + Data = (u8) (Data & 0x3f); + pci_write_config8(MEMCTRL, 0x6B, Data); + + //disable V_LINK Auto-Disconnect, or else program may stopped at some place and + //we cannot find the reason + Data = pci_read_config8(PCI_DEV(0, 0, 7), 0x47); + Data = (u8) (Data & 0xFB); + pci_write_config8(PCI_DEV(0, 0, 7), 0x47, Data); + +} + + +/* + calculate CL and dram freq + DDR1 + +---+---+---+---+---+---+---+---+ + | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | + +---+---+---+---+---+---+---+---+ + |TBD| 4 |3.5| 3 |2.5| 2 |1.5| 1 | + +---+---+---+---+---+---+---+---+ + DDR2 + +---+---+---+---+---+---+---+---+ + | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | + +---+---+---+---+---+---+---+---+ + |TBD| 6 | 5 | 4 | 3 | 2 |TBD|TBD| + +---+---+---+---+---+---+---+---+ +*/ +static const u8 CL_DDR1[7] = { 10, 15, 20, 25, 30, 35, 40 }; +static const u8 CL_DDR2[7] = { 0, 0, 20, 30, 40, 50, 60 }; + +void CalcCLAndFreq(DRAM_SYS_ATTR * DramAttr) +{ + u8 AllDimmSupportedCL, Tmp; + u8 CLMask, tmpMask, IndexDelta; + u8 SckId, BitId, TmpId; + u16 CycTime, TmpCycTime; + + /*1.list the CL value that all DIMM supported */ + AllDimmSupportedCL = 0xFF; + if (RAMTYPE_SDRAMDDR2 == DramAttr->DramType) + AllDimmSupportedCL &= 0x7C; /*bit2,3,4,5,6 */ + else /*DDR1 */ + AllDimmSupportedCL &= 0x7F; /*bit0,1,2,3,4,5,6 */ + for (SckId = 0; SckId < MAX_SOCKETS; SckId++) { + if (DramAttr->DimmInfo[SckId].bPresence) { /*all DIMM supported CL */ + AllDimmSupportedCL &= + (DramAttr->DimmInfo[SckId]. + SPDDataBuf[SPD_SDRAM_CAS_LATENCY]); + } + } + if (!AllDimmSupportedCL) { /*if equal 0, no supported CL */ + PRINT_DEBUG_MEM("SPD Data Error, Can not get CL !!!! \r"); + for (;;); + } + + /*Get CL Value */ + CLMask = 0x40; /*from Bit6 */ + + for (BitId = 7; BitId > 0; BitId--) { + if ((AllDimmSupportedCL & CLMask) == CLMask) { /*find the first bit */ + if (RAMTYPE_SDRAMDDR2 == DramAttr->DramType) + DramAttr->CL = CL_DDR2[BitId - 1]; + else /*DDR1 */ + DramAttr->CL = CL_DDR1[BitId - 1]; + break; + } + CLMask >>= 1; + } + + /*according the CL value calculate the cycle time, for X or X-1 or X-2 */ + CycTime = 0; + TmpCycTime = 0; + + for (SckId = 0; SckId < MAX_SOCKETS; SckId++) { + if (DramAttr->DimmInfo[SckId].bPresence) { + Tmp = + (DramAttr->DimmInfo[SckId]. + SPDDataBuf[SPD_SDRAM_CAS_LATENCY]); + tmpMask = 0x40; + for (TmpId = 7; TmpId > 0; TmpId--) { + if ((Tmp & tmpMask) == tmpMask) + break; + tmpMask >>= 1; + } + if (TmpId - BitId == 0) { /*get Cycle time for X, SPD BYTE9 */ + TmpCycTime = + DramAttr->DimmInfo[SckId]. + SPDDataBuf[SPD_SDRAM_TCLK_X]; + } else if (TmpId - BitId == 1) { /*get Cycle time for X-1, SPD BYTE23 */ + TmpCycTime = + DramAttr->DimmInfo[SckId]. + SPDDataBuf[SPD_SDRAM_TCLK_X_1]; + } else if (TmpId - BitId == 2) { /*get cycle time for X-2, SPD BYTE25 */ + TmpCycTime = + DramAttr->DimmInfo[SckId]. + SPDDataBuf[SPD_SDRAM_TCLK_X_2]; + } else { + //error!!! + } + if (TmpCycTime > CycTime) /*get the most cycle time,there is some problem! */ + CycTime = TmpCycTime; + } + } + + if (CycTime <= 0) { + //error! + for (;;); + } + + /* cycle time value + 0x25-->2.5ns Freq=400 DDR800 + 0x30-->3.0ns Freq=333 DDR667 + 0x3D-->3.75ns Freq=266 DDR533 + 0x50-->5.0ns Freq=200 DDR400 + 0x60-->6.0ns Freq=166 DDR333 + 0x75-->7.5ns Freq=133 DDR266 + 0xA0-->10.0ns Freq=100 DDR200 + */ + if (CycTime <= 0x25) { + DramAttr->DramFreq = DIMMFREQ_800; + DramAttr->DramCyc = 250; + } else if (CycTime <= 0x30) { + DramAttr->DramFreq = DIMMFREQ_667; + DramAttr->DramCyc = 300; + } else if (CycTime <= 0x3d) { + DramAttr->DramFreq = DIMMFREQ_533; + DramAttr->DramCyc = 375; + } else if (CycTime <= 0x50) { + DramAttr->DramFreq = DIMMFREQ_400; + DramAttr->DramCyc = 500; + } else if (CycTime <= 0x60) { + DramAttr->DramFreq = DIMMFREQ_333; + DramAttr->DramCyc = 600; + } else if (CycTime <= 0x75) { + DramAttr->DramFreq = DIMMFREQ_266; + DramAttr->DramCyc = 750; + } else if (CycTime <= 0xA0) { + DramAttr->DramFreq = DIMMFREQ_200; + DramAttr->DramCyc = 1000; + } + //if set the frequence mannul + PRINT_DEBUG_MEM("Dram Frequency:"); + PRINT_DEBUG_MEM_HEX16(DramAttr->DramFreq); + PRINT_DEBUG_MEM(" \r"); +}
Added: trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/RankMap.c =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/RankMap.c (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/RankMap.c 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,363 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +extern void DRAMSetVRNum(DRAM_SYS_ATTR * DramAttr, + u8 PhyRank, u8 VirRank, BOOLEAN Enable); + +extern void SetEndingAddr(DRAM_SYS_ATTR * DramAttr, u8 VirRank, // Ending address register number indicator (INDEX + INT8 Value); // (value) add or subtract value to this and after banks + + +void DRAMClearEndingAddress(DRAM_SYS_ATTR * DramAttr); + +void DRAMSizingEachRank(DRAM_SYS_ATTR * DramAttr); + +BOOLEAN DoDynamicSizing1XM(DRAM_SYS_ATTR * DramAttr, + u8 * nRA, u8 * nCA, u8 * nBS, u8 PhyRank); + +void DRAMSetRankMAType(DRAM_SYS_ATTR * DramAttr); + +void DRAMSetEndingAddress(DRAM_SYS_ATTR * DramAttr); + +void DRAMPRToVRMapping(DRAM_SYS_ATTR * DramAttr); + +/*=================================================================== +Function : DRAMBankInterleave() +Precondition : +Input : + DramAttr: pointer point to DRAMSYSATTR which consist the DDR and Dimm information in MotherBoard +Output : Void +Purpose : STEP 13 Set Bank Interleave VIANB3DRAMREG69[7:6] 00:No Interleave 01:2 Bank 10:4 Bank 11:8 Bank + Scan all DIMMs on board to find out the lowest Bank Interleave among these DIMMs and set register. +===================================================================*/ +void DRAMBankInterleave(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data, SpdBAData; + DIMM_INFO *CurrentDimminfo; + u8 Bank = 3, Shift, RankNO, Count; + Shift = 1; + for (RankNO = 0; RankNO < 4; RankNO += 2) //all_even 0 RankNO 4 6 + { + if ((DramAttr->RankPresentMap & Shift) != 0) { + CurrentDimminfo = &(DramAttr->DimmInfo[RankNO >> 1]); //this Rank in a dimm + SpdBAData = + (u8) (CurrentDimminfo-> + SPDDataBuf[SPD_SDRAM_NO_OF_BANKS]); + if (SpdBAData == 4) + Count = 2; + else if (SpdBAData == 8) + Count = 3; + else + Count = 0; + if (Count < Bank) + Bank = Count; + } + Shift <<= 2; + } + + Data = pci_read_config8(MEMCTRL, 0x69); + Data &= ~0xc0; + Data |= (Bank << 6); + pci_write_config8(MEMCTRL, 0x69, Data); + + + if (DramAttr->DimmNumChB > 0) { + CurrentDimminfo = &(DramAttr->DimmInfo[3]); //this Rank in a dimm + SpdBAData = + (u8) (CurrentDimminfo-> + SPDDataBuf[SPD_SDRAM_NO_OF_BANKS]); + if (SpdBAData == 4) + Bank = 2; + else if (SpdBAData == 2) + Bank = 1; + else + Bank = 0; + pci_write_config8(MEMCTRL, 0x87, Bank); + } +} + +/*=================================================================== +Function : DRAMSizingMATypeM() +Precondition : +Input : + DramAttr: pointer point to DRAMSYSATTR which consist the DDR and Dimm information in MotherBoard +Output : Void + Purpose : STEP 14 1 DRAM Sizing 2 Fill MA type 3 Prank to vrankMapping +===================================================================*/ +void DRAMSizingMATypeM(DRAM_SYS_ATTR * DramAttr) +{ + DRAMClearEndingAddress(DramAttr); + DRAMSizingEachRank(DramAttr); + //DRAMReInitDIMMBL (DramAttr); + DRAMSetRankMAType(DramAttr); + DRAMSetEndingAddress(DramAttr); + DRAMPRToVRMapping(DramAttr); +} + +/*=================================================================== +Function : DRAMClearEndingAddress() +Precondition : +Input : + DramAttr: pointer point to DRAMSYSATTR which consist the DDR and Dimm information in MotherBoard +Output : Void +Purpose : clear Ending and Start adress from 0x40-4f to zero +===================================================================*/ +void DRAMClearEndingAddress(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data, Reg; + Data = 0; + for (Reg = 0x40; Reg <= 0x4f; Reg++) { + pci_write_config8(MEMCTRL, Reg, Data); + } +} + +/*=================================================================== +Function : DRAMSizingEachRank() +Precondition : +Input : + DramAttr: pointer point to DRAMSYSATTR which consist the DDR and Dimm information in MotherBoard +Output : Void +Purpose : Sizing each Rank invidually, by number of rows column banks pins, be care about 128bit +===================================================================*/ +void DRAMSizingEachRank(DRAM_SYS_ATTR * DramAttr) +{ + u8 Slot, RankIndex, Rows, Columns, Banks; + u32 Size; + BOOLEAN HasThreeBitBA; + u8 Data; + u32 Address; + + HasThreeBitBA = FALSE; + for (Slot = 0; Slot < 2; Slot++) { + if (!DramAttr->DimmInfo[Slot].bPresence) + continue; + Rows = + DramAttr->DimmInfo[Slot]. + SPDDataBuf[SPD_SDRAM_ROW_ADDR]; + Columns = + DramAttr->DimmInfo[Slot]. + SPDDataBuf[SPD_SDRAM_COL_ADDR]; + Banks = DramAttr->DimmInfo[Slot].SPDDataBuf[SPD_SDRAM_NO_OF_BANKS]; //this is Bank number not Bank address bit + if (Banks == 4) + Banks = 2; + else if (Banks == 8) + Banks = 3; + else + Banks = 0; + Size = (u32) (1 << (Rows + Columns + Banks + 3)); + RankIndex = 2 * Slot; + DramAttr->RankSize[RankIndex] = Size; + //if this module have two ranks + if ((DramAttr->DimmInfo[Slot]. + SPDDataBuf[SPD_SDRAM_DIMM_RANKS] & 0x07) == 0x01) { + RankIndex++; + DramAttr->RankSize[RankIndex] = Size; + } + + PRINT_DEBUG_MEM("rows: "); + PRINT_DEBUG_MEM_HEX8(Rows); + PRINT_DEBUG_MEM(", columns:"); + PRINT_DEBUG_MEM_HEX8(Columns); + PRINT_DEBUG_MEM(", banks:"); + PRINT_DEBUG_MEM_HEX8(Banks); + PRINT_DEBUG_MEM("\r"); + + if (Banks == 3) + HasThreeBitBA = TRUE; + } + + //must set BA2 enable if any 8-bank device exists + if (HasThreeBitBA) { + Data = pci_read_config8(MEMCTRL, 0x53); + Data |= 0x80; + pci_write_config8(MEMCTRL, 0x53, Data); + } +#if 1 + for (RankIndex = 0; DramAttr->RankSize[RankIndex] != 0; + RankIndex++) { + PRINT_DEBUG_MEM("Rank:"); + PRINT_DEBUG_MEM_HEX8(RankIndex); + PRINT_DEBUG_MEM(", Size:"); + PRINT_DEBUG_MEM_HEX32(DramAttr->RankSize[RankIndex] >> 20); + PRINT_DEBUG_MEM("\r"); + } +#endif +} + +/*=================================================================== +Function : DRAMSetRankMAType() +Precondition : +Input : + DramAttr: pointer point to DRAMSYSATTR which consist the DDR and Dimm information in MotherBoard +Output : Void +Purpose : set the matype Reg by MAMapTypeTbl, which the rule can be found in memoryinit +===================================================================*/ +void DRAMSetRankMAType(DRAM_SYS_ATTR * DramAttr) +{ + u8 SlotNum, Data, j, Reg, or, and; + u8 ShiftBits[] = { 5, 1, 5, 1 }; /* Rank 0/1 MA Map Type is 7:5, Rank 2/3 MA Map Type is 3:1. See Fun3Rx50. */ + u8 MAMapTypeTbl[] = { /* Table 12 of P4M800 Pro DataSheet. */ + 2, 9, 0, /* Bank Address Bits, Column Address Bits, Rank MA Map Type */ + 2, 10, 1, + 2, 11, 2, + 2, 12, 3, + 3, 10, 5, + 3, 11, 6, + 3, 12, 7, + 0, 0, 0 + }; + Data = pci_read_config8(MEMCTRL, 0x50); + Data &= 0x1; + pci_write_config8(MEMCTRL, 0x50, Data); + // disable MA32/16 MA33/17 swap in memory init it has this Reg fill + Data = pci_read_config8(MEMCTRL, 0x6b); + Data &= ~0x08; + pci_write_config8(MEMCTRL, 0x6b, Data); + + Data = 0x00; + for (SlotNum = 0; SlotNum < MAX_DIMMS; SlotNum++) { + if (DramAttr->DimmInfo[SlotNum].bPresence) { + for (j = 0; MAMapTypeTbl[j] != 0; j += 3) { + if ((1 << MAMapTypeTbl[j]) == + DramAttr->DimmInfo[SlotNum]. + SPDDataBuf[SPD_SDRAM_NO_OF_BANKS] + && MAMapTypeTbl[j + 1] == + DramAttr->DimmInfo[SlotNum]. + SPDDataBuf[SPD_SDRAM_COL_ADDR]) { + break; + } + } + if (0 == MAMapTypeTbl[j]) { + PRINT_DEBUG_MEM + ("UNSUPPORTED Bank, Row and Column Addr Bits!\r"); + return; + } + or = MAMapTypeTbl[j + 2] << ShiftBits[SlotNum]; + if (DramAttr->CmdRate == 1) + or |= 0x01 << (ShiftBits[SlotNum] - 1); + + Reg = SlotNum / 2; + if ((SlotNum & 0x01) == 0x01) { + and = 0xf1; // BUGBUG: it should be 0xf0 + } else { + and = 0x1f; // BUGBUG: it should be 0x0f + } + Data = pci_read_config8(MEMCTRL, 0x50 + Reg); + Data &= and; + Data |= or; + pci_write_config8(MEMCTRL, 0x50 + Reg, Data); + } + } + //may have some Reg filling at add 3-52 11 and 3-53 in his function +} + +/*=================================================================== +Function : DRAMSetEndingAddress() +Precondition : +Input : + DramAttr: pointer point to DRAMSYSATTR which consist the DDR and Dimm information in MotherBoard +Output : Void +Purpose : realize the Vrank 40...Reg (Start and Ending Regs). Vrank have same order with phy Rank, Size is actual Size +===================================================================*/ +void DRAMSetEndingAddress(DRAM_SYS_ATTR * DramAttr) +{ + u8 Shift = 1, Data, RankNO, Size, Start = 0, End = 0, Vrank; + for (RankNO = 0; RankNO < 4; RankNO++) { + if ((DramAttr->RankPresentMap & Shift) != 0) { + Size = (u8) (DramAttr->RankSize[RankNO] >> 26); // current Size in the unit of 64M + if (Size != 0) { + + End = End + Size; // calculate current ending address, add the current Size to ending + Vrank = RankNO; // get virtual Rank + Data = End; // set begin/End address register to correspondig virtual Rank # + pci_write_config8(MEMCTRL, 0x40 + Vrank, + Data); + Data = Start; + pci_write_config8(MEMCTRL, 0x48 + Vrank, + Data); + PRINT_DEBUG_MEM("Rank: "); + PRINT_DEBUG_MEM_HEX8(Vrank); + PRINT_DEBUG_MEM(", Start:"); + PRINT_DEBUG_MEM_HEX8(Start); + PRINT_DEBUG_MEM(", End:"); + PRINT_DEBUG_MEM_HEX8(End); + PRINT_DEBUG_MEM("\r"); + + Start = End; + } + } + Shift <<= 1; + } + + if (DramAttr->RankNumChB > 0) { + //this is a bug,fixed is to 2,so the max LL size is 128M + Data = 0x02; + pci_write_config8(MEMCTRL, 0x44, Data); + } + Data = End * 4; + pci_write_config8(PCI_DEV(0, 17, 7), 0x60, Data); + // We should directly write to south Bridge, not in north bridge + // program LOW TOP Address + Data = pci_read_config8(MEMCTRL, 0x88); + pci_write_config8(MEMCTRL, 0x85, Data); + + // also program vlink mirror + // We should directly write to south Bridge, not in north bridge + pci_write_config8(PCI_DEV(0, 17, 7), 0xe5, Data); +} + +/*=================================================================== +Function : DRAMPRToVRMapping() +Precondition : +Input : + DramAttr: pointer point to DRAMSYSATTR which consist the DDR and Dimm information in MotherBoard +Output : Void +Purpose : set the Vrank-prank map with the same order +===================================================================*/ +void DRAMPRToVRMapping(DRAM_SYS_ATTR * DramAttr) +{ + u8 Shift, Data, and, or, DimmNO = 0, PhyRankNO, Reg; + + for (Reg = 0x54; Reg <= 0x57; Reg++) //clear the map-reg + { + Data = 0; + pci_write_config8(MEMCTRL, Reg, Data); + } + + Shift = 1; + for (PhyRankNO = 0; PhyRankNO < MAX_RANKS; PhyRankNO++) { + if ((DramAttr->RankPresentMap & Shift) != 0) { + or = PhyRankNO; // get virtual Rank ,same with PhyRank + or |= 0x08; + + if ((PhyRankNO & 0x01) == 0x01) // get mask for register + and = 0xf0; + else { + and = 0x0f; + or <<= 4; + } + DimmNO = (PhyRankNO >> 1); + Data = pci_read_config8(MEMCTRL, 0x54 + DimmNO); + Data &= and; + Data |= or; + pci_write_config8(MEMCTRL, 0x54 + DimmNO, Data); + } + Shift <<= 1; + } +}
Added: trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/TimingSetting.c =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/TimingSetting.c (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/TimingSetting.c 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,492 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + /* + Set Dram Timing functions + */ + +void SetCL(DRAM_SYS_ATTR * DramAttr); + +void SetTrp(DRAM_SYS_ATTR * DramAttr); + +void SetTrcd(DRAM_SYS_ATTR * DramAttr); + +void SetTras(DRAM_SYS_ATTR * DramAttr); + +void SetTrfc(DRAM_SYS_ATTR * DramAttr); + +void SetTrrd(DRAM_SYS_ATTR * DramAttr); + +void SetTwr(DRAM_SYS_ATTR * DramAttr); + +void SetTwtr(DRAM_SYS_ATTR * DramAttr); + +void SetTrtp(DRAM_SYS_ATTR * DramAttr); + +/* Set DRAM Timing*/ +void DRAMTimingSetting(DRAM_SYS_ATTR * DramAttr) +{ + PRINT_DEBUG_MEM("Set CAS latency value!"); + SetCL(DramAttr); + + PRINT_DEBUG_MEM("Set tRP value!"); + SetTrp(DramAttr); + + PRINT_DEBUG_MEM("Set tRCD value!"); + SetTrcd(DramAttr); + + PRINT_DEBUG_MEM("Set tRAS value!"); + SetTras(DramAttr); + + PRINT_DEBUG_MEM("Set tRFC value!"); + SetTrfc(DramAttr); + + PRINT_DEBUG_MEM("Set tRRD value!"); + SetTrrd(DramAttr); + + PRINT_DEBUG_MEM("Set tWR value!"); + SetTwr(DramAttr); + + PRINT_DEBUG_MEM("Set tWTR value!"); + SetTwtr(DramAttr); + + PRINT_DEBUG_MEM("Set tRTP value!"); + SetTrtp(DramAttr); +} + + +/* +Set DRAM Timing: CAS Latency for DDR1 +D0F3RX62 bit[0:2] for CAS Latency; +*/ +void SetCL(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data; + u8 CL; + + /*DDR2 CL Value: 20, 30, 40, 50 -> 2, 3, 4, 5 */ + CL = (u8) ((DramAttr->CL - 20) / 10); //000,001,010,011 + + PRINT_DEBUG_MEM("CAS = "); + PRINT_DEBUG_MEM_HEX8(CL); + PRINT_DEBUG_MEM("\n"); + Data = pci_read_config8(MEMCTRL, 0x62); + Data = (u8) ((Data & 0xf8) | CL); + pci_write_config8(MEMCTRL, 0x62, Data); +} + + +/* + Minimum row precharge time, Trp for DDR1/DDR2 + D0F3Rx64[3:2] for Trp 2T~5T +*/ +#define MAX_TRP 6 +#define MIN_TRP 2 + +void SetTrp(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data; + u16 Max, Tmp; + u8 Socket; + + + /*get the max Trp value from SPD data + SPD Byte27, Bit7:2->1ns~63ns, Bit1:0->0ns, 0.25ns, 0.50ns, 0.75ns */ + Max = 0; + for (Socket = 0; Socket < MAX_SOCKETS; Socket++) { + if (DramAttr->DimmInfo[Socket].bPresence) { + Tmp = + (u16) (DramAttr->DimmInfo[Socket]. + SPDDataBuf[SPD_SDRAM_TRP]); + if (Tmp > Max) + Max = Tmp; + } + /*Calculate clock,this value should be 2T,3T,4T,5T */ + } + Tmp = + (u16) ((Max * 100 + ((DramAttr->DramCyc) << 2) - + 1) / ((DramAttr->DramCyc) << 2)); + PRINT_DEBUG_MEM("Trp = "); + PRINT_DEBUG_MEM_HEX16(Tmp); + PRINT_DEBUG_MEM("\r"); + + if (Tmp > MAX_TRP) + Tmp = MAX_TRP; + else if (Tmp < MIN_TRP) + Tmp = MIN_TRP; + + Tmp -= 2; //00->2T, 01->3T, 10->4T, 11->5T + Tmp <<= 1; //bit1,2,3 + + Data = pci_read_config8(MEMCTRL, 0x64); + Data = (u8) ((Data & 0xf1) | (u8) Tmp); + pci_write_config8(MEMCTRL, 0x64, Data); + + //enable DDR2 8-Bank Device Timing Constraint + Data = pci_read_config8(MEMCTRL, 0x62); + Data = (u8) ((Data & 0xf7) | 0x08); + pci_write_config8(MEMCTRL, 0x62, Data); +} + + +/* +Minimum RAS to CAS dely,Trcd for DDR1/DDR2 +D0F3Rx64[7:6] for Trcd +*/ +#define MAX_TRCD 6 +#define MIN_TRCD 2 + +void SetTrcd(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data; + u16 Max, Tmp; + u8 Socket; + + + /*get the max Trcd value from SPD data + SPD Byte29, Bit7:2->1ns~63ns, Bit1:0->0ns, 0.25ns, 0.50ns, 0.75ns */ + Max = 0; + for (Socket = 0; Socket < MAX_SOCKETS; Socket++) { + if (DramAttr->DimmInfo[Socket].bPresence) { + Tmp = + (u16) (DramAttr->DimmInfo[Socket]. + SPDDataBuf[SPD_SDRAM_TRCD]); + if (Tmp > Max) + Max = Tmp; + } + } + /*Calculate clock,this value should be 2T,3T,4T,5T */ + Tmp = + (u16) ((Max * 100 + ((DramAttr->DramCyc) << 2) - + 1) / ((DramAttr->DramCyc) << 2)); + PRINT_DEBUG_MEM("Trcd ="); + PRINT_DEBUG_MEM_HEX16(Tmp); + PRINT_DEBUG_MEM("\r"); + + if (Tmp > MAX_TRCD) + Tmp = MAX_TRCD; + else if (Tmp < MIN_TRCD) + Tmp = MIN_TRCD; + Tmp -= 2; //00->2T, 01->3T, 10->4T, 11->5T + Tmp <<= 5; //bit5,6,7 + + Data = pci_read_config8(MEMCTRL, 0x64); + Data = (u8) ((Data & 0x1f) | (u8) Tmp); + pci_write_config8(MEMCTRL, 0x64, Data); + +} + +/* + minimum active to precharge time,Tras for DDR1/DDR2 + D0F3Rx62[7:4] Tras +*/ +#define MAX_TRAS 20 //20T +#define MIN_TRAS 5 //5T +void SetTras(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data; + u16 Max, Tmp; + u8 Socket; + + + /*get the max Tras value from SPD data + SPD byte30: bit0:7 1ns~255ns */ + Max = 0; + for (Socket = 0; Socket < MAX_SOCKETS; Socket++) { + if (DramAttr->DimmInfo[Socket].bPresence) { + Tmp = + (u16) (DramAttr->DimmInfo[Socket]. + SPDDataBuf[SPD_SDRAM_TRAS]); + if (Tmp > Max) + Max = Tmp; + } + } + + /*Calculate clock,value range 5T-20T */ + Tmp = + (u16) ((Max * 100 + DramAttr->DramCyc - + 1) / (DramAttr->DramCyc)); + PRINT_DEBUG_MEM("Tras ="); + PRINT_DEBUG_MEM_HEX16(Tmp); + PRINT_DEBUG_MEM("\r"); + + if (Tmp > MAX_TRAS) + Tmp = MAX_TRAS; + else if (Tmp < MIN_TRAS) + Tmp = MIN_TRAS; + Tmp -= 5; //0->5T ... 1111->20T + Tmp <<= 4; //bit4:7 + + Data = pci_read_config8(MEMCTRL, 0x62); + Data = (u8) ((Data & 0x0f) | (u8) Tmp); + pci_write_config8(MEMCTRL, 0x62, Data); +} + +/* +Minimum refresh to activate/refresh command period Trfc for DDR1/DDR2 +D0F3Rx61[5:0] for Trfc +*/ + +#define MAX_TRFC 71 // Max supported,71T +#define MIN_TRFC 8 // Min supported,8T + +void SetTrfc(DRAM_SYS_ATTR * DramAttr) +{ + + u8 Data; + u32 Max, Tmp; + u8 Byte40; + u8 Socket; + + /*get the max Trfc value from SPD data */ + Max = 0; + for (Socket = 0; Socket < MAX_SOCKETS; Socket++) { + if (DramAttr->DimmInfo[Socket].bPresence) { + Tmp = + (u32) (DramAttr->DimmInfo[Socket]. + SPDDataBuf[SPD_SDRAM_TRFC]) * 100; + /*only DDR2 need to add byte 40 bit[7:4] */ + Byte40 = + (DramAttr->DimmInfo[Socket]. + SPDDataBuf[SPD_SDRAM_TRFC2]); + /*if bit0 = 1, byte42(RFC)+256ns, SPD spec JEDEC standard No.21.c */ + if (Byte40 & 0x01) + Tmp += (256 * 100); + /*bit1,2,3 000->0ns+byte42; 001->0.25ns+byte42; 010->0.33ns+byte42; 011->0.5ns+byte42;100-> 0.75ns+byte42 */ + switch ((Byte40 >> 1) & 0x07) { /*bit1,2,3 */ + case 1: + Tmp += 25; + break; + case 2: + Tmp += 33; + break; + case 3: + Tmp += 50; + break; + case 4: + Tmp += 66; + break; + case 5: + Tmp += 75; + break; + case 6: //what is FRU??? + default: + break; + } + if (Tmp > Max) + Max = Tmp; + } + } + + /*Calculate clock,value range 8T-71T */ + Tmp = (u16) ((Max + DramAttr->DramCyc - 1) / (DramAttr->DramCyc)); + PRINT_DEBUG_MEM("Trfc = "); + PRINT_DEBUG_MEM_HEX16(Tmp); + PRINT_DEBUG_MEM("\r"); + if (Tmp > MAX_TRFC) + Tmp = MAX_TRFC; + else if (Tmp < MIN_TRFC) { + // return; + Tmp = 0x40; + } + /*D0F3Rx61 bit[0:5] 0->8T ... 63->71T */ + Tmp -= 8; + + Data = pci_read_config8(MEMCTRL, 0x61); + Data = (u8) ((Data & 0xc0) | ((u8) Tmp & 0x3f)); + pci_write_config8(MEMCTRL, 0x61, Data); +} + + +/* +Minimum row active to row active delay: Trrd for DDR1/DDR2 +D0F3Rx61[7:6]:Trrd 00->2T, 01->3T, 10->4T, 11->5T +*/ +#define MAX_TRRD 5 +#define MIN_TRRD 2 + +void SetTrrd(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data; + u16 Max, Tmp; + u8 Socket; + + + /*get the max Trrd value from SPD data + SPD Byte28, Bit7:2->1ns~63ns, Bit1:0->0ns, 0.25ns, 0.50ns, 0.75ns */ + Max = 0; + for (Socket = 0; Socket < MAX_SOCKETS; Socket++) { + if (DramAttr->DimmInfo[Socket].bPresence) { + Tmp = + (u16) (DramAttr->DimmInfo[Socket]. + SPDDataBuf[SPD_SDRAM_TRRD]); + if (Tmp > Max) + Max = Tmp; + } + } + + /*Calculate clock,this value should be 2T,3T,4T,5T */ + Tmp = + (u16) ((Max * 100 + ((DramAttr->DramCyc) << 2) - + 1) / ((DramAttr->DramCyc) << 2)); + PRINT_DEBUG_MEM("Trrd ="); + PRINT_DEBUG_MEM_HEX16(Tmp); + PRINT_DEBUG_MEM("\r"); + + if (Tmp > MAX_TRRD) + Tmp = MAX_TRRD; + else if (Tmp < MIN_TRRD) + Tmp = MIN_TRRD; + Tmp -= 2; //00->2T, 01->3T, 10->4T, 11->5T + Tmp <<= 6; + + Data = pci_read_config8(MEMCTRL, 0x61); + Data = (u8) ((Data & 0x3f) | (u8) Tmp); + pci_write_config8(MEMCTRL, 0x61, Data); +} + + +/* +Write recovery time: Twr for DDR1/DDR2 +Device 0 Function 3:REG63[7:5]:Twr 00->2T 01->3T 10->4T 11->5T +*/ +#define MAX_TWR 6 +#define MIN_TWR 2 + +void SetTwr(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data; + u16 Max, Tmp; + u8 Socket; + + /*get the max Trtp value from SPD data + SPD Byte36, Bit7:2->1ns~63ns, Bit1:0->0ns, 0.25ns, 0.50ns, 0.75ns */ + Max = 0; + for (Socket = 0; Socket < MAX_SOCKETS; Socket++) { + if (DramAttr->DimmInfo[Socket].bPresence) { + Tmp = + (u16) (DramAttr->DimmInfo[Socket]. + SPDDataBuf[SPD_SDRAM_TWR]); + if (Tmp > Max) + Max = Tmp; + } + } + /*Calculate clock */ + Tmp = (u16) ((Max * 100 + ((DramAttr->DramCyc) << 2) - 1) / ((DramAttr->DramCyc) << 2)); //this value should be 2T,3T,4T,5T + PRINT_DEBUG_MEM("Twr = "); + PRINT_DEBUG_MEM_HEX16(Tmp); + PRINT_DEBUG_MEM("\r"); + + if (Tmp > MAX_TWR) + Tmp = MAX_TWR; + else if (Tmp < MIN_TWR) + Tmp = MIN_TWR; + Tmp -= 2; //00->2T, 01->3T, 10->4T, 11->5T + Tmp <<= 5; + + Data = pci_read_config8(MEMCTRL, 0x63); + Data = (u8) ((Data & 0x1f) | (u8) Tmp); + pci_write_config8(MEMCTRL, 0x63, Data); +} + + +/* +Internal write to read command delay: Twtr for DDR1/DDR2 +Device 0 Function 3:REG63[1,0]:Twtr DDR: 1T or 2T; DDR2 2T or 3T +*/ +#define MAX_TWTR 5 //5T +#define MIN_TWTR 2 //2T + +void SetTwtr(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data; + u16 Max, Tmp; + u8 Socket; + + /*get the max Trtp value from SPD data + SPD Byte37, Bit7:2->1ns~63ns, Bit1:0->0ns, 0.25ns, 0.50ns, 0.75ns */ + Max = 0; + for (Socket = 0; Socket < MAX_SOCKETS; Socket++) { + if (DramAttr->DimmInfo[Socket].bPresence) { + Tmp = + (u16) (DramAttr->DimmInfo[Socket]. + SPDDataBuf[SPD_SDRAM_TWTR]); + if (Tmp > Max) + Max = Tmp; + } + } + /*Calculate clock */ + Tmp = (u16) ((Max * 100 + ((DramAttr->DramCyc) << 2) - 1) / ((DramAttr->DramCyc) << 2)); //this value should be 2T or 3T + + PRINT_DEBUG_MEM("Twtr ="); + PRINT_DEBUG_MEM_HEX16(Tmp); + PRINT_DEBUG_MEM("\r"); + + if (Tmp > MAX_TWR) + Tmp = MAX_TWTR; + else if (Tmp < MIN_TWR) + Tmp = MIN_TWTR; + Tmp -= 2; //00->2T, 01->3T, 10->4T, 11->5T + Data = pci_read_config8(MEMCTRL, 0x63); + Data = (u8) ((Data & 0xFC) | Tmp); + pci_write_config8(MEMCTRL, 0x63, Data); +} + + +/* +Internal read to precharge command delay, Trtp for DDR1/DDR2 +Device 0 Function 3:REG63[3]:Trtp 2T or 3T +*/ +#define MAX_TRTP 3 //3T +#define MIN_TRTP 2 //2T + +void SetTrtp(DRAM_SYS_ATTR * DramAttr) +{ + u8 Data; + u16 Max, Tmp; + u8 Socket; + + + /*get the max Trtp value from SPD data + SPD Byte38, Bit7:2->1ns~63ns, Bit1:0->0ns, 0.25ns, 0.50ns, 0.75ns */ + Max = 0; + for (Socket = 0; Socket < MAX_SOCKETS; Socket++) { + if (DramAttr->DimmInfo[Socket].bPresence) { + Tmp = + (u16) (DramAttr->DimmInfo[Socket]. + SPDDataBuf[SPD_SDRAM_TRTP]); + if (Tmp > Max) + Max = Tmp; + } + } + /*Calculate clock */ + Tmp = (u16) ((Max * 100 + ((DramAttr->DramCyc) << 2) - 1) / ((DramAttr->DramCyc) << 2)); //this value should be 2T or 3T + + PRINT_DEBUG_MEM("Trtp ="); + PRINT_DEBUG_MEM_HEX16(Tmp); + PRINT_DEBUG_MEM("\r"); + + Data = pci_read_config8(MEMCTRL, 0x63); + if (Tmp > MIN_TRTP) + Data = (u8) (Data | 0x08); /*set bit3, set 3T */ + else + Data = (u8) (Data & 0xf7); /*clear bit3, set 2T */ + + pci_write_config8(MEMCTRL, 0x63, Data); +}
Added: trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/UMARamSetting.c =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/UMARamSetting.c (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/ddr2init/vx800/UMARamSetting.c 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,445 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +typedef struct __UMA_RAM_tag { + u16 DramSize; + u8 D0F3Val; + u8 D1F0Val; + u8 VgaPortVal; +} UMARAM; +#define UMARAM_512M 7 +#define UMARAM_256M 6 +#define UMARAM_128M 5 +#define UMARAM_64M 4 +#define UMARAM_32M 3 +#define UMARAM_16M 2 +#define UMARAM_8M 1 +#define UMARAM_0M 0 + + +#define FB_512M 0 +#define FB_256M 0x40 +#define FB_128M 0x60 +#define FB_64M 0x70 +#define FB_32M 0x78 +#define FB_16M 0x7c +#define FB_8M 0x7E +#define FB_4M 0x7F + +#define VGA_PORT_512M 0x00 +#define VGA_PORT_256M 0x80 +#define VGA_PORT_128M 0xC0 +#define VGA_PORT_64M 0xE0 +#define VGA_PORT_32M 0xF0 +#define VGA_PORT_16M 0xF8 + +static const UMARAM UMARamArr[] = { + {0, UMARAM_0M, FB_4M, 0xFE}, + {8, UMARAM_8M, FB_8M, 0xFC}, + {16, UMARAM_16M, FB_16M, VGA_PORT_16M}, + {32, UMARAM_32M, FB_32M, VGA_PORT_32M}, + {64, UMARAM_64M, FB_64M, VGA_PORT_64M}, + {128, UMARAM_128M, FB_128M, VGA_PORT_128M}, + {256, UMARAM_256M, FB_256M, VGA_PORT_256M}, + {512, UMARAM_512M, FB_512M, VGA_PORT_512M}, + {0xffff, 0xff, 0xff, 0xFF} +}; + +void SetUMARam(void) +{ +#if 1 + u8 ramregs[] = { 0x43, 0x42, 0x41, 0x40 }; + device_t vga_dev = PCI_DEV(0, 1, 0), d0f0_dev = PCI_DEV(0, 0, 0); + u8 ByteVal, temp; + UMARAM *pUMARamTable; + u16 UmaSize; + u8 SLD0F3Val, SLD1F0Val, VgaPortVal; + u32 RamSize, SLBase, Tmp; + u8 i; + PRINT_DEBUG_MEM("Entering vx800 SetUMARam.\n"); + SLD0F3Val = 0; + SLD1F0Val = 0; + VgaPortVal = 0; + + + ByteVal = pci_read_config8(MEMCTRL, 0xa1); + ByteVal |= 0x80; + pci_write_config8(MEMCTRL, 0xa1, ByteVal); + + //set VGA Timer + pci_write_config8(MEMCTRL, 0xa2, 0xee); + + //set agp misc + //GFX Data Delay to Sync with Clock + pci_write_config8(MEMCTRL, 0xa4, 0x01); + + //page register life timer + pci_write_config8(MEMCTRL, 0xa6, 0x76); + + //GMINT and GFX relatate + //note Bit 3 VGA Enable + pci_write_config8(MEMCTRL, 0xa7, 0x8c); + // ByteVal = 0x4c; + + //GMINT Misc.1 + //pci_write_config8(MEMCTRL, 0xb0, 0x80); + + //pci_write_config8(MEMCTRL, 0xb1, 0xaa); + + //AGPCINT MISC + //pci_write_config8(MEMCTRL, 0xb2, 0x82); + //ByteVal = 0x8A; + + //GMINT MISC.2 + //disable read pass write + pci_write_config8(MEMCTRL, 0xb3, 0x9A); + + //EPLL Register + //pci_write_config8(MEMCTRL, 0xb4, 0x04); + + //enable CHA and CHB merge mode + pci_write_config8(MEMCTRL, 0xde, 0x06); + + //if can get the value from setup interface, so get the value + //else use the default value + UmaSize = CONFIG_VIDEO_MB; + + for (pUMARamTable = UMARamArr; pUMARamTable->DramSize != 0xffff; + pUMARamTable++) { + if (UmaSize == pUMARamTable->DramSize) { + SLD0F3Val = pUMARamTable->D0F3Val; + SLD1F0Val = pUMARamTable->D1F0Val; + VgaPortVal = pUMARamTable->VgaPortVal; + } + } + //set SL size + //Fill in Fun3_RXA1[6:4] with the Frame Buffer size for the Integrated Graphic Device. + ByteVal = pci_read_config8(MEMCTRL, 0xa1); + ByteVal = (ByteVal & 0x8f) | (SLD0F3Val << 4); + pci_write_config8(MEMCTRL, 0xa1, ByteVal); + + +// vga_dev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX855_VGA, 0); + + //RxB2 may be for S.L. and RxB1 may be for L. L. + // It is different from Spec. + ByteVal = SLD1F0Val; + pci_write_config8(vga_dev, 0xb2, ByteVal); + + + //set M1 size + //ByteVal=pci_read_config8(MEMCTRL, 0xa3); + //ByteVal = 0x02; + //pci_write_config8(MEMCTRL, 0xa3, ByteVal); + + PRINT_DEBUG_MEM("UMA setting - 3\n"); + + + + + //Enable p2p IO/mem + ByteVal = 0x07; + pci_write_config8(vga_dev, 0x04, ByteVal); + + + + + //must set SL and MMIO base, or else when enable GFX memory space, system will hang + //set S.L base + Tmp = pci_read_config32(vga_dev, 0x10); + Tmp = 0xfffffff8; + pci_write_config32(vga_dev, 0x10, Tmp); + Tmp = pci_read_config32(vga_dev, 0x10); + Tmp = VIACONFIG_VGA_PCI_10; + pci_write_config32(vga_dev, 0x10, Tmp); + + //set MMIO base + Tmp = pci_read_config32(vga_dev, 0x14); + Tmp = 0xfffffffC; + pci_write_config32(vga_dev, 0x14, Tmp); + Tmp = pci_read_config32(vga_dev, 0x14); + Tmp = VIACONFIG_VGA_PCI_14; + pci_write_config32(vga_dev, 0x14, Tmp); + + +//enable direct cpu frame buffer access + i = pci_rawread_config8(PCI_RAWDEV(0, 0, 3), 0xa1); + i = (i & 0xf0) | (VIACONFIG_VGA_PCI_10 >> 28); + pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0xa1, i); + pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0xa0, 0x01); + + + //enable GFx memory space access control for S.L and mmio + ByteVal = pci_read_config8(d0f0_dev, 0xD4); + ByteVal |= 0x03; + //ByteVal |= 0x01; + pci_write_config8(d0f0_dev, 0xD4, ByteVal); + + + //enable Base VGA 16 Bits Decode + ByteVal = pci_read_config8(d0f0_dev, 0xfe); + ByteVal |= 0x10; + pci_write_config8(d0f0_dev, 0xfe, ByteVal); + + + //disable CHB L.L + //set VGA memory selection + ByteVal = pci_read_config8(vga_dev, 0xb0); + ByteVal &= 0xF8; + //ByteVal |= 0x01; + ByteVal |= 0x03; + pci_write_config8(vga_dev, 0xb0, ByteVal); + + //set LL size + + //enable memory access to SL,MMIO,LL and IO to 3B0~3BB,3C0 ~3DF + //ByteVal = 0x03; + //pci_write_config8(d0f0_dev, 0xc0, ByteVal); + + //Turn on Graphic chip IO port port access + ByteVal = inb(0x03C3); + ByteVal |= 0x01; + outb(ByteVal, 0x03C3); + + //Turn off Graphic chip Register protection + outb(0x10, 0x03C4); + + ByteVal = inb(0x03C5); + ByteVal |= 0x01; + outb(ByteVal, 0x03C5); + + //set VGA memory Frequence + //direct IO port 0x3DX to vga io space 0x3C2[0] + ByteVal = inb(0x03CC); + ByteVal |= 0x03; + outb(ByteVal, 0x03C2); + // ByteVal=inb(0x03C2); + // ByteVal |= 0x01; + // outb(ByteVal,0x03C2); + + +#if 1 //bios porting guide has no this two defination: 3d on 3d4/3d5 and 39 on 3c4/3c5 + //set frequence 0x3D5.3d[7:4] + outb(0x3d, 0x03d4); + + temp = pci_read_config8(MEMCTRL, 0x90); + temp = (u8) (temp & 0x07); + ByteVal = inb(0x03d5); + switch (temp) { + case 0: //DIMMFREQ_200: + ByteVal = (u8) ((ByteVal & 0x0F) | 0x30); + break; + case 1: //DIMMFREQ_266: + ByteVal = (u8) ((ByteVal & 0x0F) | 0x40); + break; + case 3: //DIMMFREQ_400: + ByteVal = (u8) ((ByteVal & 0x0F) | 0x60); + break; + case 4: //DIMMFREQ_533: + ByteVal = (u8) ((ByteVal & 0x0F) | 0x70); + break; + case 5: //DIMMFREQ_667: + ByteVal = (u8) ((ByteVal & 0x0F) | 0x80); + break; + case 6: //DIMMFREQ_800: + ByteVal = (u8) ((ByteVal & 0x0F) | 0x90); + break; + default: + ByteVal = (u8) ((ByteVal & 0x0F) | 0x70); + break; + } + outb(ByteVal, 0x03d5); + + // Set frame buffer size + outb(0x39, 0x03c4); + outb(1 << SLD0F3Val, 0x03c5); + +#endif + // Set S.L. size in GFX's register + outb(0x68, 0x03c4); + outb(VgaPortVal, 0x03c5); + + // ECLK Selection (00:166Mhz, 01:185Mhz, 10:250Mhz, 11:275Mhz) + // set 3C5.5A[0]=1, address maps to secondary resgiters + outb(0x5a, 0x03c4); + ByteVal = inb(0x03c5); + ByteVal |= 0x01; + outb(ByteVal, 0x03c5); + + // Set 3D5.4C[7:6] (00:166Mhz, 01:185Mhz, 10:250Mhz, 11:275Mhz) + outb(0x4c, 0x03d4); + ByteVal = inb(0x03d5); + ByteVal = (ByteVal & 0x3F) | 0x80; + outb(ByteVal, 0x03d5); + + // set 3C5.5A[0]=0, address maps to first resgiters + outb(0x5a, 0x03c4); + ByteVal = inb(0x03c5); + ByteVal &= 0xFE; + outb(ByteVal, 0x03c5); + + // Set S.L. Address in System Memory + //calculate dram size + for (RamSize = 0, i = 0; i < ARRAY_SIZE(ramregs); i++) { + RamSize = pci_read_config8(MEMCTRL, ramregs[i]); + if (RamSize != 0) + break; + } + //calculate SL Base Address + SLBase = (RamSize << 26) - (UmaSize << 20); + + + outb(0x6D, 0x03c4); + //SL Base[28:21] + outb((u8) ((SLBase >> 21) & 0xFF), 0x03c5); + + outb(0x6e, 0x03c4); + //SL Base[36:29] + outb((u8) ((SLBase >> 29) & 0xFF), 0x03c5); + + outb(0x6f, 0x03c4); + outb(0x00, 0x03c5); + + // Set SVID high byte + outb(0x36, 0x03c4); + outb(0x11, 0x03c5); + + // Set SVID Low byte + outb(0x35, 0x03c4); + outb(0x06, 0x03c5); + + // Set SID high byte + outb(0x38, 0x03c4); + outb(0x51, 0x03c5); + + // Set SID Low byte + outb(0x37, 0x03c4); + outb(0x22, 0x03c5); + + //start : For enable snapshot mode control + // program 3C5 for SNAPSHOT Mode control, set RxF3h=1Ah + outb(0xf3, 0x03c4); + ByteVal = inb(0x03c5); + ByteVal = (ByteVal & 0xE5) | 0x1A; + outb(ByteVal, 0x03c5); + + + outb(0xf3, 0x03d4); + ByteVal = inb(0x03d5); + ByteVal = (ByteVal & 0xE5) | 0x1A; + outb(ByteVal, 0x03d5); + + u8 table3c43c5[0x70] = { + 0x03, 0x01, 0x0F, 0x00, 0x06, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x78, 0x00, 0x00, 0x00, 0xBE, 0x20, 0x7F, + 0x60, 0x7F, 0x08, 0x31, 0xCC, 0x00, 0x01, 0x00, + 0x00, 0x18, 0x10, 0x00, 0x00, 0x00, 0x3D, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x04, 0xF3, 0xFF, 0xFC, + 0xF8, 0x0C, 0x00, 0x00, 0x40, 0x06, 0x11, 0x22, + 0x51, 0x10, 0x00, 0x01, 0x19, 0x0C, 0x00, 0xFF, + 0x38, 0x40, 0x30, 0xFF, 0x70, 0x8C, 0x85, 0x9D, + 0x80, 0x05, 0x54, 0x90, 0x03, 0x30, 0x00, 0x5F, + 0x1F, 0x00, 0x00, 0xFF, 0x00, 0x00, 0xFF, 0x00, + 0x06, 0xDF, 0x00, 0x20, 0x20, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x40, 0x20, 0x00, 0x20, 0x20, + 0xE0, 0x20, 0xD0, 0x3F, 0x00, 0xE0, 0x00, 0x00 + }; + u8 table3d43d5[0x88] = { + 0x7F, 0x63, 0x63, 0x83, 0x69, 0x19, 0x72, 0xE0, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x58, 0x9C, 0x57, 0x90, 0x00, 0x57, 0x73, 0xE3, + 0x57, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x0C, 0x00, 0x11, 0x06, 0x00, 0x20, 0x01, 0x34, + 0xEE, 0x74, 0x01, 0x01, 0x08, 0x84, 0x00, 0x00, + 0x00, 0xF3, 0x40, 0x90, 0x00, 0x00, 0x00, 0x01, + 0x00, 0x12, 0x00, 0x02, 0x00, 0x00, 0x10, 0x00, + 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, + 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x9D, 0x9D, 0x10, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x9D, 0x9D, 0x9D, + 0x9D, 0x9D, 0x9D, 0x9D, 0x00, 0x9D, 0x1D, 0x00, + 0x00, 0x00, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, + 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, + }; + + + u8 table3c0space[0xc0] = { + 0x11, 0x00, 0x10, 0x01, 0x26, 0x3D, 0xFF, 0x00, + 0x10, 0x3F, 0x00, 0x00, 0x2F, 0x00, 0x22, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x50, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + }; +#if 0 +//for(i=0;i<0xc0;i++) + for (i = 0; i < 0x40; i++) // + { + outb(table3c0space[i], 0x03c0 + i); + } + + + for (i = 0; i < 0x70; i++) { + outb(i, 0x03c4); + outb(table3c43c5[i], 0x03c5); + } + for (i = 0; i < 0x88; i++) { + outb(i, 0x03d4); + outb(table3d43d5[i], 0x03d5); + } + outb(0x92, 0x03d4); + outb(0x80, 0x03d5); + + outb(0xa3, 0x03d4); + outb(0x00, 0x03d5); + + outb(0xe8, 0x03d4); + outb(0x40, 0x03d5); +#endif +//3d4 3d freq +//IO Port / Index: 3X5.3D +//Scratch Pad Register 4 + +// outb(0x39,0x03c4);// + //outb(1 << SLD0F3Val ,0x03c5); +// +#endif + +}
Added: trunk/coreboot-v2/src/northbridge/via/vx800/examples/DrivingClkPhaseData.c =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/examples/DrivingClkPhaseData.c (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/examples/DrivingClkPhaseData.c 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,242 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + #include "northbridge/via/vx800/DrivingClkPhaseData.h" + +// DQS Driving +//Reg0xE0, 0xE1 +// According to #Bank to set DRAM DQS Driving +// #Bank 1 2 3 4 5 6 7 8 +static const u8 DDR2_DQSA_Driving_Table[4] = { 0xEE, 0xEE, 0xEE, 0xEE}; +static const u8 DDR2_DQSB_Driving_Table[2] = { 0xEE, 0xEE}; + +// DQ Driving +//Reg0xE2, 0xE3 +// For DDR2: According to bank to set DRAM DQ Driving +static const u8 DDR2_DQA_Driving_Table[4] = { 0xAC, 0xAC, 0xAC, 0xAC }; +static const u8 DDR2_DQB_Driving_Table[2] = { 0xCA, 0xCA }; + + +// CS Driving +//Reg0xE4, 0xE5 +// According to #Bank to set DRAM CS Driving +// DDR1 #Bank 1 2 3 4 5 6 7 8 +static const u8 DDR2_CSA_Driving_Table_x8[4] = { 0x44, 0x44, 0x44, 0x44 }; +static const u8 DDR2_CSB_Driving_Table_x8[2] = { 0x44, 0x44}; +static const u8 DDR2_CSA_Driving_Table_x16[4]= { 0x44, 0x44, 0x44, 0x44}; +static const u8 DDR2_CSB_Driving_Table_x16[2]= { 0x44, 0x44}; +// MAA Driving +//Reg0xE8, Reg0xE9 +static const u8 DDR2_MAA_Driving_Table[MA_Table][5] = + { + //Chip number, 400, 533, 667 800 ;(SRAS, SCAS, SWE)RxE8 + { 6, 0x86, 0x86, 0x86, 0x86}, // total MAA chips = 00 ~ 06 + { 18, 0x86, 0x86, 0x86, 0x86}, // total MAA chips = 06 ~ 18 + {255, 0xDB, 0xDB, 0xDB, 0xDB} // total MAA chips = 18 ~ + }; + +static const u8 DDR2_MAB_Driving_Table[MA_Table][2] = + { + // Chip number, Value ;(SRAS, SCAS, SWE)RxE9 + { 6, 0x86 }, // total MAB chips = 00 ~ 06 + { 18, 0x86 }, // total MAB chips = 06 ~ 18 + {255, 0xDB } // total MAB chips = 18 ~ + }; + +// DCLK Driving +//Reg0xE6, 0xE7 +// For DDR2: According to #Freq to set DRAM DCLK Driving +// freq 400M, 533M, 667M, 800M + +static const u8 DDR2_DCLKA_Driving_Table[4] = { 0xFF, 0xFF, 0xFF, 0xFF }; +static const u8 DDR2_DCLKB_Driving_Table[4] = { 0xFF, 0xFF, 0xFF, 0xFF }; + +/* +Duty cycle +Duty cycle Control for DQ/DQS/DDRCKG in ChA & ChB +D0F3RxEC/D0F3RxED/D0F3RxEE/D0F3RxEF +According to DRAM frequency to control Duty Cycle +*/ +static const u8 ChA_Duty_Control_DDR2[DUTY_CYCLE_REG_NUM][DUTY_CYCLE_FREQ_NUM] = + { + // (And NOT) DDR800 DDR667 DDR533 DDR400 + //Reg Mask Value Value Value Value + {0xEC, 0x00, 0x30, 0x30, 0x30, 0x30 }, // 1Rank + {0xEE, 0x0F, 0x40, 0x40, 0x00, 0x00 }, + {0xEF, 0xCF, 0x00, 0x30, 0x30, 0x30} + }; + +static const u8 ChB_Duty_Control_DDR2[DUTY_CYCLE_REG_NUM][DUTY_CYCLE_FREQ_NUM] = + { + // (And NOT) DDR800 DDR667 DDR533 DDR400 + //Reg Mask Value Value Value Value + {0xED, 0x00, 0x88, 0x88, 0x84, 0x88 }, // 1Rank + {0xEE, 0xF0, 0x00, 0x00, 0x00, 0x00 }, + {0xEF, 0xFC, 0x00, 0x00, 0x00, 0x00 } + }; + + +/* +DRAM Clock Phase Control for FeedBack Mode +Modify NB Reg: Rx90[7]/Rx91/Rx92/Rx93/Rx94 +Processing: + 1.Program VIA_NB3DRAM_REG90[7]=0b for FeedBack mode + 2.Program clock phase value with ChA/B DCLK enable, VIA_NB3DRAM_REG91[7:3]=00b + 3.Check ChB rank #, if 0, VIA_NB3DRAM_REG91[7]=1b, to disable ChB DCLKO + ChA DCLKO can not be disable, so always program VIA_NB3DRAM_REG91[3]=0b + */ +static const u8 DDR2_ChA_Clk_Phase_Table_1R[3][Clk_Phase_Table_DDR2_Width] = + { + // (And NOT) DDR800 DDR667 DDR533 DDR400 + //Reg Mask Value Value Value Value + {0x91, 0xF8, 0x02, 0x01, 0x00, 0x07 }, // 1Rank + {0x92, 0xF8, 0x04, 0x03, 0x03, 0x02 }, + {0x93, 0xF8, 0x06, 0x05, 0x04, 0x03 } + }; + +static const u8 DDR2_ChB_Clk_Phase_Table_1R[3][Clk_Phase_Table_DDR2_Width] = + { + // (And NOT) DDR800 DDR667 DDR533 DDR400 + //Reg Mask Value Value Value Value + {0x91, 0x0F, 0x20, 0x10, 0x00, 0x70 }, // 1Rank + {0x92, 0x0F, 0x40, 0x30, 0x30, 0x20 }, + {0x93, 0x0F, 0x60, 0x50, 0x40, 0x30 } + }; + +/*static const u8 DDR2_ChA_Clk_Phase_Table_2R[3][Clk_Phase_Table_DDR2_Width] = + { + // (And NOT) DDR800 DDR667 DDR533 DDR400 + //Reg Mask Value Value Value Value + {0x91, 0xF8, 0x04, 0x03, 0x04, 0x01 }, // 1Rank + {0x92, 0xF8, 0x03, 0x06, 0x05, 0x04 }, + {0x93, 0xF8, 0x03, 0x07, 0x06, 0x05 } + };*/ + +static const u8 DDR2_ChA_Clk_Phase_Table_2R[3][Clk_Phase_Table_DDR2_Width] = + { + // (And NOT) DDR800 DDR667 DDR533 DDR400 + //Reg Mask Value Value Value Value + {0x91, 0xF8, 0x02, 0x01, 0x00, 0x07}, // 1Rank + {0x92, 0xF8, 0x04, 0x03, 0x03, 0x02 }, + {0x93, 0xF8, 0x06, 0x05, 0x04, 0x03 } + }; + +/* +DRAM Write Data phase control +Modify NB Reg: Rx74/Rx75/Rx76 +*/ +/*static const u8 DDR2_ChA_WrtData_Phase_Table[WrtData_REG_NUM ][WrtData_FREQ_NUM] = + { + // (And NOT) DDR800 DDR667 DDR533 DDR400 + //Reg Mask Value Value Value Value + {0x74, 0xF8, 0x03, 0x04, 0x05, 0x02 }, // 1Rank + {0x75, 0xF8, 0x03, 0x04, 0x05, 0x02 }, + {0x76, 0x00, 0x10, 0x80, 0x00, 0x07 } + };*/ + +static const u8 DDR2_ChA_WrtData_Phase_Table[WrtData_REG_NUM ][WrtData_FREQ_NUM] = + { + // (And NOT) DDR800 DDR667 DDR533 DDR400 + //Reg Mask Value Value Value Value + {0x74, 0xF8, 0x01, 0x00, 0x00, 0x07 }, // 1Rank + {0x75, 0xF8, 0x01, 0x00, 0x00, 0x07 }, + {0x76, 0x10, 0x80, 0x87, 0x07, 0x06 }, + {0x8C, 0xFC, 0x03, 0x03, 0x03, 0x03 } + }; + +/*static const u8 DDR2_ChB_WrtData_Phase_Table[WrtData_REG_NUM ][WrtData_FREQ_NUM] = + { + // (And NOT) DDR800 DDR667 DDR533 DDR400 + //Reg Mask Value Value Value Value + {0x74, 0x8F, 0x30, 0x40, 0x30, 0x20 }, // 1Rank + {0x75, 0x8F, 0x30, 0x40, 0x30, 0x20 }, + {0x8A, 0x00, 0x10, 0x80, 0x07, 0x07 } + }; +*/ +/* +DQ/DQS Output Delay Control +Modify NB D0F3: RxF0/RxF1/RxF2/RxF3 +*/ +static const u8 DDR2_CHA_DQ_DQS_Delay_Table[4][DQ_DQS_Delay_Table_Width] = + { + // RxF0 RxF1 RxF2 RxF3 + { 0x00, 0x00, 0x00, 0x00 },// DDR400 + { 0x00, 0x00, 0x00, 0x00 },// DDR533 + { 0x00, 0x00, 0x00, 0x00 },// DDR667 + { 0x00, 0x00, 0x00, 0x00 }// DDR800 + }; +static const u8 DDR2_CHB_DQ_DQS_Delay_Table[4][DQ_DQS_Delay_Table_Width] = + { + // RxF4 RxF5 RxF6 RxF7 + { 0x00, 0x00, 0x00, 0x00 },// DDR400 + { 0x00, 0x00, 0x00, 0x00 },// DDR533 + { 0x00, 0x00, 0x00, 0x00 },// DDR667 + { 0x00, 0x00, 0x00, 0x00 }// DDR800 + }; + +/* +DQ/DQS input Capture Control +modify NB D0F3_Reg:Rx78/Rx79/Rx7A/Rx7B +*/ + +/*static const u8 DDR2_ChA_DQS_Input_Capture_Tbl[DQS_INPUT_CAPTURE_REG_NUM ][DQS_INPUT_CAPTURE_FREQ_NUM] = + { + // (And NOT) DDR800 DDR667 DDR533 DDR400 + //Reg Mask Value Value Value Value + {0x78, 0x00, 0x83, 0x8D, 0x87, 0x83 }, // 1Rank + {0x7A, 0xF0, 0x00, 0x00, 0x00, 0x00 }, + {0x7B, 0x00, 0x10, 0x30, 0x20, 0x10 } + };*/ + + +static const u8 DDR2_ChA_DQS_Input_Capture_Tbl[DQS_INPUT_CAPTURE_REG_NUM ][DQS_INPUT_CAPTURE_FREQ_NUM] = + { + // (And NOT) DDR800 DDR667 DDR533 DDR400 + //Reg Mask Value Value Value Value + {0x78, 0xC0, 0x0D, 0x07, 0x03, 0x01 }, // 1Rank + {0x7A, 0xF0, 0x00, 0x00, 0x00, 0x00 }, + {0x7B, 0x00, 0x34, 0x34, 0x20, 0x10 } + }; + +static const u8 DDR2_ChB_DQS_Input_Capture_Tbl[DQS_INPUT_CAPTURE_REG_NUM ][DQS_INPUT_CAPTURE_FREQ_NUM] = + { + // (And NOT) DDR800 DDR667 DDR533 DDR400 + //Reg Mask Value Value Value Value + {0x79, 0x00, 0x89, 0x89, 0x87, 0x83 }, // 1Rank + {0x7A, 0x0F, 0x00, 0x00, 0x00, 0x00 }, + {0x8B, 0x00, 0x34, 0x34, 0x20, 0x10 } + }; + +static const u8 Fixed_DQSA_1_2_Rank_Table[4][2] = +{ +// Rx70 Rx71 + { 0x00, 0x05 }, // DDR800 + { 0x00, 0x06 }, // DDR667 + { 0x00, 0x04 }, // DDR533 + { 0x00, 0x05 } // DDR400 +}; +static const u8 Fixed_DQSA_3_4_Rank_Table[4][2] = +{ +// Rx70 Rx71 + {0x00 , 0x04}, // DDR800 + {0x00 , 0x04}, // DDR667 + {0x00 , 0x03}, // DDR533 + {0x00 , 0x04} // DDR400 +};
Added: trunk/coreboot-v2/src/northbridge/via/vx800/examples/cache_as_ram_auto.c =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/examples/cache_as_ram_auto.c (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/examples/cache_as_ram_auto.c 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,660 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define ASSEMBLY 1 +#define __ROMCC__ +#define RAMINIT_SYSINFO 1 +#define CACHE_AS_RAM_ADDRESS_DEBUG 0 + +#include <stdint.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <arch/hlt.h> +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" +#include "northbridge/via/vx800/vx800.h" +#include "cpu/x86/mtrr/earlymtrr.c" +#include "cpu/x86/bist.h" +#include "pc80/udelay_io.c" +#include "lib/delay.c" +#if CONFIG_USE_INIT == 0 +#include "lib/memcpy.c" +#endif +#include "cpu/x86/lapic/boot_cpu.c" + +#include "DrivingClkPhaseData.c" + +#include "northbridge/via/vx800/raminit.h" +#include "northbridge/via/vx800/raminit.c" +#include "cpu/x86/car/copy_and_run.c" + +int acpi_is_wakeup_early_via_vx800(void) +{ + device_t dev; + u16 tmp, result; + + print_debug("In acpi_is_wakeup_early_via_vx800\r\n"); + /* Power management controller */ + dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_VX855_LPC), 0); + + if (dev == PCI_DEV_INVALID) + die("Power management controller not found\r\n"); + + /* Set ACPI base address to I/O VX800_ACPI_IO_BASE. */ + pci_write_config16(dev, 0x88, VX800_ACPI_IO_BASE | 0x1); + + /* Enable ACPI accessm RTC signal gated with PSON. */ + pci_write_config8(dev, 0x81, 0x84); + + tmp = inw(VX800_ACPI_IO_BASE + 0x04); + result = ((tmp & (7 << 10)) >> 10) == 1 ? 3 : 0; + print_debug(" boot_mode="); + print_debug_hex16(result); + print_debug("\r\n"); + return result; +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + + +static void enable_mainboard_devices(void) +{ + device_t dev; + uint16_t values; + + print_debug("In enable_mainboard_devices \r\n"); + + /* + Enable P2P Bridge Header for External PCI BUS. + */ + dev = pci_locate_device(PCI_ID(0x1106, 0xa353), 0); + pci_write_config8(dev, 0x4f, 0x41); +} + +static void enable_shadow_ram(void) +{ + uint8_t shadowreg; + pci_write_config8(PCI_DEV(0, 0, 3), 0x80, 0xff); + /* 0xf0000-0xfffff - ACPI tables */ + shadowreg = pci_read_config8(PCI_DEV(0, 0, 3), 0x83); + shadowreg |= 0x30; + pci_write_config8(PCI_DEV(0, 0, 3), 0x83, shadowreg); + /* 0xe0000-0xeffff - elfload? */ + + pci_write_config8(PCI_DEV(0, 0, 3), 0x82, 0xff); + +} + + +/* +this table contains the value needed to be set before begin to init dram. +Note: REV_Bx should be cared when porting a new board!!!!! */ +static const struct VIA_PCI_REG_INIT_TABLE mNbStage1InitTbl[] = { + //VT3409 no pcie + 0x00, 0xFF, NB_APIC_REG(0x61), 0xFF, 0x0E, // Set Exxxxxxx as pcie mmio config range + 0x00, 0xFF, NB_APIC_REG(0x60), 0xF4, 0x0B, // Support extended cfg address of pcie + //0x00, 0xFF, NB_APIC_REG(0x42), 0xF9, 0x02, // APIC Interrupt((BT_INTR)) Control + // Set ROMSIP value by software + + /*0x00, 0xFF, NB_HOST_REG(0x70), 0x77, 0x33, // 2x Host Adr Strobe/Pad Pullup Driving = 3 + 0x00, 0xFF, NB_HOST_REG(0x71), 0x77, 0x33, // 2x Host Adr Strobe/Pad Pulldown Driving = 3 + 0x00, 0xFF, NB_HOST_REG(0x72), 0x77, 0x33, // 4x Host Dat Strobe/Pad Pullup Driving = 3 + 0x00, 0xFF, NB_HOST_REG(0x73), 0x77, 0x33, // 4x Host Dat Strobe/Pad Pulldown Driving = 3 + 0x00, 0xFF, NB_HOST_REG(0x74), 0xFF, 0x21, // Memory I/F timing ctrl + 0x00, 0xFF, NB_HOST_REG(0x74), 0xFF, 0xE1, // Memory I/F timing ctrl + 0x00, 0xFF, NB_HOST_REG(0x75), 0xFF, 0x18, // AGTL+ I/O Circuit + 0x00, 0xFF, NB_HOST_REG(0x76), 0xFB, 0x0C, // AGTL+ Compensation Status + 0x00, 0xFF, NB_HOST_REG(0x78), 0xFF, 0x33, // 2X AGTL+ Auto Compensation Offset + 0x00, 0xFF, NB_HOST_REG(0x79), 0xFF, 0x33, // 4X AGTL+ Auto Compensation Offset + 0x00, 0xFF, NB_HOST_REG(0x7A), 0x3F, 0x72, // AGTL Compensation Status + 0x00, 0xFF, NB_HOST_REG(0x7A), 0x3F, 0x77, // AGTL Compensation Status + 0x00, 0xFF, NB_HOST_REG(0x7B), 0xFF, 0x44, // Input Host Address / Host Strobe Delay Control for HA Group + 0x00, 0xFF, NB_HOST_REG(0x7B), 0xFF, 0x22, // Input Host Address / Host Strobe Delay Control for HA Group + 0x00, 0xFF, NB_HOST_REG(0x7C), 0xFF, 0x00, // Output Delay Control of PAD for HA Group + 0x00, 0xFF, NB_HOST_REG(0x7D), 0xFF, 0xAA, // Host Address / Address Clock Output Delay Control (Only for P4 Bus) + 0x00, 0xFF, NB_HOST_REG(0x7E), 0xFF, 0x10, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus) + 0x00, 0xFF, NB_HOST_REG(0x7E), 0xFF, 0x40, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus) + 0x00, 0xFF, NB_HOST_REG(0x7F), 0xFF, 0x10, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus) + 0x00, 0xFF, NB_HOST_REG(0x7F), 0xFF, 0x40, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus) + 0x00, 0xFF, NB_HOST_REG(0x80), 0x3F, 0x44, // Host Data Receiving Strobe Delay Ctrl 1 + 0x00, 0xFF, NB_HOST_REG(0x81), 0xFF, 0x44, // Host Data Receiving Strobe Delay Ctrl 2 + 0x00, 0xFF, NB_HOST_REG(0x82), 0xFF, 0x00, // Output Delay of PAD for HDSTB + 0x00, 0xFF, NB_HOST_REG(0x83), 0xFF, 0x00, // Output Delay of PAD for HD + 0x00, 0xFF, NB_HOST_REG(0x84), 0xFF, 0x44, // Host Data / Strobe CKG Control (Group 0) + 0x00, 0xFF, NB_HOST_REG(0x85), 0xFF, 0x44, // Host Data / Strobe CKG Control (Group 1) + 0x00, 0xFF, NB_HOST_REG(0x86), 0xFF, 0x44, // Host Data / Strobe CKG Control (Group 2) + 0x00, 0xFF, NB_HOST_REG(0x87), 0xFF, 0x44, // Host Data / Strobe CKG Control (Group 3) */ + + + // CPU Host Bus Control + 0x00, 0xFF, NB_HOST_REG(0x50), 0x1F, 0x08, // Request phase ctrl: Dynamic Defer Snoop Stall Count = 8 + //0x00, 0xFF, NB_HOST_REG(0x51), 0xFF, 0x7F, // CPU I/F Ctrl-1: Disable Fast DRDY and RAW + 0x00, 0xFF, NB_HOST_REG(0x51), 0xFF, 0x7C, // CPU I/F Ctrl-1: Disable Fast DRDY and RAW + 0x00, 0xFF, NB_HOST_REG(0x52), 0xCB, 0xCB, // CPU I/F Ctrl-2: Enable all for performance + //0x00, 0xFF, NB_HOST_REG(0x53), 0xFF, 0x88, // Arbitration: Host/Master Occupancy timer = 8*4 HCLK + 0x00, 0xFF, NB_HOST_REG(0x53), 0xFF, 0x44, // Arbitration: Host/Master Occupancy timer = 4*4 HCLK + 0x00, 0xFF, NB_HOST_REG(0x54), 0x1E, 0x1C, // Misc Ctrl: Enable 8QW burst Mem Access + //0x00, 0xFF, NB_HOST_REG(0x55), 0x06, 0x06, // Miscellaneous Control 2 + 0x00, 0xFF, NB_HOST_REG(0x55), 0x06, 0x04, // Miscellaneous Control 2 + 0x00, 0xFF, NB_HOST_REG(0x56), 0xF7, 0x63, // Write Policy 1 + //0x00, 0xFF, NB_HOST_REG(0x59), 0x3D, 0x01, // CPU Miscellaneous Control 1, enable Lowest-Priority IPL + //0x00, 0xFF, NB_HOST_REG(0x5c), 0xFF, 0x00, // CPU Miscellaneous Control 2 + 0x00, 0xFF, NB_HOST_REG(0x5D), 0xFF, 0xA2, // Write Policy + 0x00, 0xFF, NB_HOST_REG(0x5E), 0xFF, 0x88, // Bandwidth Timer + 0x00, 0xFF, NB_HOST_REG(0x5F), 0x46, 0x46, // CPU Misc Ctrl + // 0x00, 0xFF, NB_HOST_REG(0x90), 0xFF, 0x0B, // CPU Miscellaneous Control 3 + //0x00, 0xFF, NB_HOST_REG(0x96), 0x0B, 0x0B, // CPU Miscellaneous Control 2 + 0x00, 0xFF, NB_HOST_REG(0x96), 0x0B, 0x0A, // CPU Miscellaneous Control 2 + 0x00, 0xFF, NB_HOST_REG(0x98), 0xC1, 0x41, // CPU Miscellaneous Control 3 + 0x00, 0xFF, NB_HOST_REG(0x99), 0x0E, 0x06, // CPU Miscellaneous Control 4 + + + // Set APIC and SMRAM + 0x00, 0xFF, NB_HOST_REG(0x97), 0xFF, 0x00, // APIC Related Control + 0x00, 0xFF, NB_DRAMC_REG(0x86), 0xD6, 0x29, // SMM and APIC Decoding: enable APIC, MSI and SMRAM A-Seg + 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 // End of the table +}; + +#define USE_VCP 1 //0 means use DVP +#define USE_COM1 1 +#define USE_COM2 0 + +#define gCom1Base 0x3f8 +#define gCom2Base 0x2f8 +void EmbedComInit() +{ + u8 ByteVal; + u16 ComBase; + + //enable NB multiple function control + ByteVal = pci_read_config8(PCI_DEV(0, 0, 0), 0x4f); + ByteVal = ByteVal | 0x01; + pci_write_config8(PCI_DEV(0, 0, 0), 0x4f, ByteVal); + + //VGA Enable + ByteVal = pci_read_config8(PCI_DEV(0, 0, 3), 0xA1); + ByteVal = ByteVal | 0x80; + pci_write_config8(PCI_DEV(0, 0, 3), 0xA1, ByteVal); + + ByteVal = pci_read_config8(PCI_DEV(0, 0, 3), 0xA7); + ByteVal = ByteVal | 0x08; + pci_write_config8(PCI_DEV(0, 0, 3), 0xA7, ByteVal); + + //Enable p2p IO/mem + ByteVal = pci_read_config8(PCI_DEV(0, 1, 0), 0x4); + ByteVal = ByteVal | 0x07; + pci_write_config8(PCI_DEV(0, 1, 0), 0x4, ByteVal); + + //Turn on Graphic chip IO port port access + ByteVal = inb(0x3C3); + ByteVal = ByteVal | 0x01; + outb(ByteVal, 0x3C3); + + //Turn off Graphic chip Register protection + outb(0x10, 0x3C4); + ByteVal = inb(0x3C5); + ByteVal = ByteVal | 0x01; + outb(ByteVal, 0x3C5); + + //south module pad share enable 0x3C5.78[7] + outb(0x78, 0x3C4); + ByteVal = inb(0x3C5); + ByteVal = ByteVal | 0x80; + outb(ByteVal, 0x3C5); + + //enable UART Function multiplex with DVP or VCP pad D17F0Rx46[7,6] + ByteVal = pci_read_config8(PCI_DEV(0, 17, 0), 0x46); + //multiplex with VCP + if (USE_VCP == 1) + ByteVal = (ByteVal & 0x3F) | 0x40; + //multiplex with DVP + else + ByteVal = (ByteVal & 0x3F) | 0xC0; + pci_write_config8(PCI_DEV(0, 17, 0), 0x46, ByteVal); + + + + //enable embeded com1 and com2 D17F0RxB0[5,4] + ByteVal = pci_read_config8(PCI_DEV(0, 17, 0), 0xB0); + ByteVal = ByteVal & 0xcf; + //multiplex with VCP + if (USE_COM1 == 1) + ByteVal = ByteVal | 0x10; + if (USE_COM2 == 1) + ByteVal = ByteVal | 0x20; + pci_write_config8(PCI_DEV(0, 17, 0), 0xB0, ByteVal); + + if (USE_COM1 == 1) + ComBase = gCom1Base; + else + ComBase = gCom2Base; + +//noharddrive + + //set embeded com1 IO base = 0x3E8 + //D17F0RB4 + //ByteVal = 0xFD; + if (USE_COM1 == 1) { + ByteVal = (u8) ((gCom1Base >> 3) | 0x80); + pci_write_config8(PCI_DEV(0, 17, 0), 0xB4, ByteVal); + ByteVal = pci_read_config8(PCI_DEV(0, 17, 0), 0xb2); + ByteVal = (ByteVal & 0xf0) | 0x04; + pci_write_config8(PCI_DEV(0, 17, 0), 0xB2, ByteVal); + } + //set embeded com2 IO base = 0x2E8 + //D17F0RB5 + //ByteVal = 0xDD; + if (USE_COM2 == 1) { + ByteVal = (u8) ((gCom2Base >> 3) | 0x80); + pci_write_config8(PCI_DEV(0, 17, 0), 0xB5, ByteVal); + ByteVal = pci_read_config8(PCI_DEV(0, 17, 0), 0xb2); + ByteVal = (ByteVal & 0x0f) | 0x30; + pci_write_config8(PCI_DEV(0, 17, 0), 0xB2, ByteVal); + } + //no port 80 biger then 0x10 + + //disable interrupt + ByteVal = inb(ComBase + 3); + outb(ByteVal & 0x7F, ComBase + 3); + outb(0x00, ComBase + 1); + + //set baudrate + ByteVal = inb(ComBase + 3); + outb(ByteVal | 0x80, ComBase + 3); + outb(0x01, ComBase); + outb(0x00, ComBase + 1); + + //set frame fromat + ByteVal = inb(ComBase + 3); + outb(ByteVal & 0x3F, ComBase + 3); + outb(0x03, ComBase + 3); + outb(0x00, ComBase + 2); + outb(0x00, ComBase + 4); + + //SOutput("Embeded com output\n"); + //while(1); +} + +/* cache_as_ram.inc jump to here +*/ +void amd64_main(unsigned long bist) +{ + unsigned cpu_reset = 0; + u16 boot_mode; + u8 rambits; + + //device_t dev; + /* Enable multifunction for northbridge. */ + pci_write_config8(PCI_DEV(0, 0, 0), 0x4f, 0x01); + EmbedComInit(); + //enable_vx800_serial(); + //uart_init(); + + +/* 1. D15F0 + +a) RxBAh = 71h + +b) RxBBh = 05h + +c) RxBEh = 71h + +d) RxBFh = 05h + +2. D17F0 + +a) RxA0h = 06h + +b) RxA1h = 11h + +c) RxA2h = 27h + +d) RxA3h = 32h + +e) Rx79h = 40h + +f) Rx72h = 27h + +g) Rx73h = 32h +*/ + + u8 Data8; + + pci_write_config16(PCI_DEV(0, 0xf, 0), 0xBA, + PCI_DEVICE_ID_VIA_VX855_IDE); + pci_write_config16(PCI_DEV(0, 0xf, 0), 0xBE, + PCI_DEVICE_ID_VIA_VX855_IDE); + pci_write_config16(PCI_DEV(0, 0x11, 0), 0xA0, PCI_VENDOR_ID_VIA); + pci_write_config16(PCI_DEV(0, 0x11, 0), 0xA2, + PCI_DEVICE_ID_VIA_VX855_LPC); + Data8 = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x79); + Data8 &= ~0x40; + Data8 |= 0x40; + pci_write_config8(PCI_DEV(0, 0x11, 0), 0x79, Data8); + pci_write_config16(PCI_DEV(0, 0x11, 0), 0x72, + PCI_DEVICE_ID_VIA_VX855_LPC); + + console_init(); //there are to function defination of console_init(), while the src/archi386/lib is the right one + + /* decide if this is a s3 wakeup or a normal boot */ + boot_mode = acpi_is_wakeup_early_via_vx800(); + /*add this, to transfer "cpu restart" to "cold boot" + When this boot is not a S3 resume, and PCI registers had been written, + then this must be a cpu restart(result of os reboot cmd). so we need a real "cold boot". */ + if ((boot_mode != 3) + && (pci_read_config8(PCI_DEV(0, 0, 3), 0x80) != 0)) { + outb(6, 0xcf9); + } + + /*x86 cold boot I/O cmd */ + enable_smbus(); + //smbus_fixup(&ctrl);// this fix does help vx800!, but vx855 no need this + + if (bist == 0) { + // CAR need mtrr untill mem is ok, so i disable this early_mtrr_init(); + //print_debug("doing early_mtrr\r\n"); + //early_mtrr_init(); + } + + /* Halt if there was a built-in self test failure. */ + report_bist_failure(bist); + + print_debug("Enabling mainboard devices\r\n"); + enable_mainboard_devices(); + + u8 Data; + device_t device; + /* Get NB Chip revision from D0F4RxF6, revision will be used in via_pci_inittable */ + device = PCI_DEV(0, 0, 4); + Data = pci_read_config8(device, 0xf6); + print_debug("NB chip revision ="); + print_debug_hex8(Data); + print_debug("\r\n"); + /* make NB ready before draminit */ + via_pci_inittable(Data, mNbStage1InitTbl); + + /*add this. + When resume from s3, draminit is skiped, so need to recovery any PCI register related to draminit. + and d0f3 didnt lost its Power during whole s3 time, so any register not belongs to d0f3 need to be recoveried . */ +#if 1 + if (boot_mode == 3) { + u8 i; + u8 ramregs[] = { 0x43, 0x42, 0x41, 0x40 }; + DRAM_SYS_ATTR DramAttr; + + print_debug("This is a S3 wakeup\r\n"); + + memset(&DramAttr, 0, sizeof(DRAM_SYS_ATTR)); + /*Step1 DRAM Detection; DDR1 or DDR2; Get SPD Data; Rank Presence;64 or 128bit; Unbuffered or registered; 1T or 2T */ + DRAMDetect(&DramAttr); + + /*begin to get ram size, 43,42 41 40 contains the end address of last rank in ddr2-slot */ + device = PCI_DEV(0, 0, 3); + for (rambits = 0, i = 0; i < ARRAY_SIZE(ramregs); i++) { + rambits = pci_read_config8(device, ramregs[i]); + if (rambits != 0) + break; + } + + DRAMDRDYSetting(&DramAttr); + + Data = 0x80; // this value is same with DevInit.c + pci_write_config8(PCI_DEV(0, 0, 4), 0xa3, Data); + pci_write_config8(PCI_DEV(0, 17, 7), 0x60, rambits << 2); + Data = pci_read_config8(MEMCTRL, 0x88); + pci_write_config8(PCI_DEV(0, 17, 7), 0xE5, Data); + + DRAMRegFinalValue(&DramAttr); // I just copy this function from draminit to here! + SetUMARam(); // I just copy this function from draminit to here! + print_debug("Resume from S3, RAM init was ignored\r\n"); + } else { + ddr2_ram_setup(); + ram_check(0, 640 * 1024); + } +#endif + //ddr2_ram_setup(); + /*this line is the same with cx700 port . */ + enable_shadow_ram(); + + /* + For coreboot most time of S3 resume is the same as normal boot, so some memory area under 1M become dirty, + so before this happen, I need to backup the content of mem to top-mem. + I will reserve the 1M top-men in LBIO table in coreboot_table.c and recovery the content of 1M-mem in wakeup.c + */ +#if PAYLOAD_IS_SEABIOS==1 // + if (boot_mode == 3) { + /* some idea of Libo.Feng at amd.com in http://www.coreboot.org/pipermail/coreboot/2008-December/043111.html + I want move the 1M data, I have to set some MTRRs myself. */ + /* seting mtrr before back memoy save s3 resume time about 0.14 seconds */ + /*because CAR stack use cache, and here to use cache , must be careful, + 1 during these mtrr code, must no function call, (after this mtrr, I think it should be ok to use function) + 2 before stack switch, no use variable that have value set before this + 3 due to 2, take care of "cpu_reset", I directlly set it to ZERO. + */ + u32 memtop = *(u32 *) WAKE_MEM_INFO; + u32 memtop1 = *(u32 *) WAKE_MEM_INFO - 0x100000; + u32 memtop2 = *(u32 *) WAKE_MEM_INFO - 0x200000; + u32 memtop3 = + *(u32 *) WAKE_MEM_INFO - 64 * 1024 - 0x100000; + u32 memtop4 = + *(u32 *) WAKE_MEM_INFO - 64 * 1024 - 0x100000 + + 0xe0000; + /* __asm__ volatile ( + "movl $0x204, %%ecx\n\t" + "xorl %%edx, %%edx\n\t" + "movl %0,%%eax\n\t" + "orl $(0 | 6), %%eax\n\t" + "wrmsr\n\t" + + "movl $0x205, %%ecx\n\t" + "xorl %%edx, %%edx\n\t" + "movl $0x100000,%%eax\n\t" + "decl %%eax\n\t" + "notl %%eax\n\t" + "orl $(0 | 0x800), %%eax\n\t" + "wrmsr\n\t" + ::"g"(memtop2) + ); + __asm__ volatile ( + "movl $0x206, %%ecx\n\t" + "xorl %%edx, %%edx\n\t" + "movl %0,%%eax\n\t" + "orl $(0 | 6), %%eax\n\t" + "wrmsr\n\t" + + "movl $0x207, %%ecx\n\t" + "xorl %%edx, %%edx\n\t" + "movl $0x100000,%%eax\n\t" + "decl %%eax\n\t" + "notl %%eax\n\t" + "orl $(0 | 0x800), %%eax\n\t" + "wrmsr\n\t" + ::"g"(memtop1) + ); + __asm__ volatile ( + "movl $0x208, %ecx\n\t" + "xorl %edx, %edx\n\t" + "movl $0,%eax\n\t" + "orl $(0 | 6), %eax\n\t" + "wrmsr\n\t" + + "movl $0x209, %ecx\n\t" + "xorl %edx, %edx\n\t" + "movl $0x100000,%eax\n\t" + "decl %eax\n\t" + "notl %eax\n\t" + "orl $(0 | 0x800), %eax\n\t" + "wrmsr\n\t" + ); + */ + // WAKE_MEM_INFO is inited in get_set_top_available_mem in tables.c + // these two memcpy not not be enabled if set the MTRR around this two lines. + /*__asm__ volatile ( + "movl $0, %%esi\n\t" + "movl %0, %%edi\n\t" + "movl $0xa0000, %%ecx\n\t" + "shrl $2, %%ecx\n\t" + "rep movsd\n\t" + ::"g"(memtop3) + ); + __asm__ volatile ( + "movl $0xe0000, %%esi\n\t" + "movl %0, %%edi\n\t" + "movl $0x20000, %%ecx\n\t" + "shrl $2, %%ecx\n\t" + "rep movsd\n\t" + ::"g"(memtop4) + );*/ + print_debug("copy memory to high memory to protect s3 wakeup vector code \r\n"); //this can have function call, because no variable used before this + memcpy((unsigned char *) ((*(u32 *) WAKE_MEM_INFO) - + 64 * 1024 - 0x100000), + (unsigned char *) 0, 0xa0000); + memcpy((unsigned char *) ((*(u32 *) WAKE_MEM_INFO) - + 64 * 1024 - 0x100000 + 0xe0000), + (unsigned char *) 0xe0000, 0x20000); + + /* restore the MTRR previously modified. */ +/* __asm__ volatile ( + "wbinvd\n\t" + "xorl %edx, %edx\n\t" + "xorl %eax, %eax\n\t" + "movl $0x204, %ecx\n\t" + "wrmsr\n\t" + "movl $0x205, %ecx\n\t" + "wrmsr\n\t" + "movl $0x206, %ecx\n\t" + "wrmsr\n\t" + "movl $0x207, %ecx\n\t" + "wrmsr\n\t" + "movl $0x208, %ecx\n\t" + "wrmsr\n\t" + "movl $0x209, %ecx\n\t" + "wrmsr\n\t" + );*/ + } +#endif +/* +the following code is copied from src\mainboard\tyan\s2735\cache_as_ram_auto.c +Only the code around CLEAR_FIRST_1M_RAM is changed. +I remove all the code around CLEAR_FIRST_1M_RAM and #include "cpu/x86/car/cache_as_ram_post.c" +the CLEAR_FIRST_1M_RAM seems to make cpu/x86/car/cache_as_ram_post.c stop at somewhere, +and cpu/x86/car/cache_as_ram_post.c do not cache my $XIP_ROM_BASE+SIZE area. + +So,I use: #include "cpu/via/car/cache_as_ram_post.c". my via-version post.c have some diff withx86-version +*/ +#if 1 + { + /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */ + unsigned v_esp; + __asm__ volatile ("movl %%esp, %0\n\t":"=a" (v_esp) + ); +#if CONFIG_USE_INIT + printk_debug("v_esp=%08x\r\n", v_esp); +#else + print_debug("v_esp="); + print_debug_hex32(v_esp); + print_debug("\r\n"); +#endif + } + +#endif +#if 1 + + cpu_reset_x: +// it seems that cpu_reset is not used before this, so I just reset it, (this is because the s3 resume, setting in mtrr and copy data may destroy +//stack + cpu_reset = 0; +#if CONFIG_USE_INIT + printk_debug("cpu_reset = %08x\r\n", cpu_reset); +#else + print_debug("cpu_reset = "); + print_debug_hex32(cpu_reset); + print_debug("\r\n"); +#endif + + if (cpu_reset == 0) { + print_debug("Clearing initial memory region: "); + } + print_debug("No cache as ram now - "); + + /* store cpu_reset to ebx */ + __asm__ volatile ("movl %0, %%ebx\n\t"::"a" (cpu_reset) + ); + + +/* cancel these lines, CLEAR_FIRST_1M_RAM cause the cpu/x86/car/cache_as_ram_post.c stop at somewhere + + if(cpu_reset==0) { +#define CLEAR_FIRST_1M_RAM 1 +#include "cpu/via/car/cache_as_ram_post.c" + } + else { +#undef CLEAR_FIRST_1M_RAM +#include "cpu/via/car/cache_as_ram_post.c" + } +*/ +#include "cpu/via/car/cache_as_ram_post.c" +//#include "cpu/x86/car/cache_as_ram_post.c" + __asm__ volatile ( + /* set new esp *//* before _RAMBASE */ + "subl %0, %%ebp\n\t" + "subl %0, %%esp\n\t":: + "a" ((DCACHE_RAM_BASE + DCACHE_RAM_SIZE) - + _RAMBASE) + ); + + { + unsigned new_cpu_reset; + + /* get back cpu_reset from ebx */ + __asm__ volatile ("movl %%ebx, %0\n\t":"=a" (new_cpu_reset) + ); + + /* We can not go back any more, we lost old stack data in cache as ram */ + if (new_cpu_reset == 0) { + print_debug("Use Ram as Stack now - done\r\n"); + } else { + print_debug("Use Ram as Stack now - \r\n"); + } +#if CONFIG_USE_INIT + printk_debug("new_cpu_reset = %08x\r\n", new_cpu_reset); +#else + print_debug("new_cpu_reset = "); + print_debug_hex32(new_cpu_reset); + print_debug("\r\n"); +#endif + /*copy and execute coreboot_ram */ + copy_and_run(new_cpu_reset); + /* We will not return */ + } +#endif + + + print_debug("should not be here -\r\n"); + +}
Added: trunk/coreboot-v2/src/northbridge/via/vx800/examples/chipset_init.c =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/examples/chipset_init.c (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/examples/chipset_init.c 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,1298 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#if HAVE_ACPI_RESUME == 1 +#include <arch/acpi.h> +#endif +#include <../northbridge/via/vx800/vx800.h> + +#include <arch/io.h> +#include <arch/pci_rawops.h> + +static const struct VIA_PCI_REG_INIT_TABLE mSbStage1InitTbl[] = { + // Combine Stage1 registers + {0x00, 0xFF, SB_LPC_REG(0x41), 0x40, 0x40}, + + // Acpi init registers in sb stage1 + {0x00, 0xFF, SB_LPC_REG(0x40), 0x04, 0x04}, // Enable 4D0/4D1 support + {0x00, 0xFF, SB_LPC_REG(0x4E), 0x00, 0x08}, // Enable RTC port 74/75 + {0x00, 0xFF, SB_LPC_REG(0x51), 0x0D, 0x0D}, // and KBC + {0x00, 0xFF, SB_LPC_REG(0x52), 0x0F, 0x09}, // Enable Serial IRQ + {0x00, 0xFF, SB_LPC_REG(0x67), 0x00, 0x04}, // Set FERR voltage to 1.5v + {0x00, 0xFF, SB_LPC_REG(0x98), 0xFF, 0x00}, // Disable GP3 Timer + + {0x00, 0xFF, SB_IDEC_REG(0xb9), 0x01, 0x01}, + + {0x00, 0xFF, SB_VLINK_REG(0xE6), 0xFF, 0x39}, // Enable SMM A-Seg, MSI and Io APIC + ///// SPI-BAR. + //// SPI_BASE_ADDRESS = 0xFED1 0000 + 0x00, 0xFF, SB_LPC_REG(0xBC), 0xFF, 0x00, + 0x00, 0xFF, SB_LPC_REG(0xBD), 0xFF, 0xD1, + 0x00, 0xFF, SB_LPC_REG(0xBE), 0xFF, 0xFE, +// 0x00, 0xFF, ((0x11<<16)|(0x00<<8)|0xBC), 0xFF, 0x00,//this , for the different macro +// 0x00, 0xFF, ((0x11<<16)|(0x00<<8)|0xBD), 0xFF, 0xD1, +// 0x00, 0xFF, ((0x11<<16)|(0x00<<8)|0xBE), 0xFF, 0xFE, + ///// End of 2008-04-17 + + {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table +}; + +static const struct VIA_PCI_REG_INIT_TABLE mNbStage2InitTable[] = { + // D0F0: AGP Feature. For 3353, No AGP Feature + + // D0F2~D0F3 is configured by MemoryInit Peim + + // D0F4: NB PMU + 0x00, 0xFF, NB_PMU_REG(0x84), 0x00, 0xDB, + 0x00, 0xFF, NB_PMU_REG(0x85), 0x00, 0x05, + 0x00, 0xFF, NB_PMU_REG(0x89), 0x00, 0xF8, + 0x00, 0xFF, NB_PMU_REG(0x8B), 0x00, 0xBF, + 0x00, 0xFF, NB_PMU_REG(0x8D), 0x00, 0xFC, + 0x00, 0xFF, NB_PMU_REG(0x8E), 0x00, 0x19, + 0x00, 0xFF, NB_PMU_REG(0x8F), 0x03, 0x00, + 0x00, 0xFF, NB_PMU_REG(0x90), 0x00, 0xFF, + 0x00, 0xFF, NB_PMU_REG(0x91), 0x00, 0xFF, + 0x00, 0xFF, NB_PMU_REG(0x92), 0x00, 0xCC, + 0x00, 0xFF, NB_PMU_REG(0xA0), 0x00, 0x80, + 0x00, 0xFF, NB_PMU_REG(0xA1), 0x00, 0xE0, + 0x00, 0xFF, NB_PMU_REG(0xA2), 0x00, 0xD6, + 0x00, 0xFF, NB_PMU_REG(0xA3), 0x00, 0x80, + 0x00, 0xFF, NB_PMU_REG(0xA8), 0x00, 0x20, + + // D0F5: NB APIC, PXPTRF and MSGC + //Note: the Rx6A, RCRBH Base Address, is not set, which is related to PCIE Root Complex. + //Note: the Rx60, Extended CFG Address. Support and Rx61, Extended CFG Address, are set by NB Peim that is in the PEI Phase. + //Note: the Rx42, APIC Interrupt((BT_INTR)) Control, is set by NB Peim that is in PEI phase. + 0x00, 0xFF, NB_PXPTRF_REG(0x50), 0x00, 0x00, + 0x00, 0xFF, NB_PXPTRF_REG(0x54), 0x00, 0x80, + 0x00, 0xFF, NB_PXPTRF_REG(0x55), 0x00, 0x04, + 0x00, 0xFF, NB_PXPTRF_REG(0x58), 0x00, 0x00, + 0x00, 0xFF, NB_PXPTRF_REG(0x59), 0x00, 0x02, + 0x00, 0xFF, NB_PXPTRF_REG(0x5E), 0x00, 0x00, + 0x00, 0xFF, NB_PXPTRF_REG(0x5F), 0x00, 0x06, + 0x00, 0xFF, NB_PXPTRF_REG(0x80), 0x00, 0x18, //Set RVC1DM, RTHBHIT, RUWRDYD, RUPRRDY1, RUWPOPHD to 1. + 0x00, 0xFF, NB_PXPTRF_REG(0x82), 0x00, 0x00, //Set RVC1RPSW, RVC1RQ1T to 1. + 0x00, 0xFF, NB_PXPTRF_REG(0x83), 0x00, 0x81, + 0x00, 0xFF, NB_PXPTRF_REG(0x84), 0x00, 0x28, + 0x00, 0xFF, NB_PXPTRF_REG(0x85), 0x00, 0xC0, + 0x00, 0xFF, NB_MSGC_REG(0xA3), 0x00, 0x01, // RWAKEEN +// 0x00, 0xFF, NB_PXPTRF_REG(0x64), 0x40, 0x00, //RTDNP2B32EN + 0x00, 0xFF, NB_PXPTRF_REG(0xF3), 0xFC, 0x20, + 0x00, 0xFF, NB_PXPTRF_REG(0x85), 0x00, 0x00, //RP2P1ABORT + + +// fine-tune +// If no settings, C7 will hang or reboot in XP, but CN will not. + 0x00, 0xFF, NB_HOST_REG(0x51), 0x84, 0x00, + 0x00, 0xFF, NB_HOST_REG(0x52), 0x0F, 0x03, + 0x00, 0xFF, NB_HOST_REG(0x54), 0x04, 0x00, + 0x00, 0xFF, NB_HOST_REG(0x55), 0x04, 0x00, + 0x00, 0xFF, NB_HOST_REG(0x59), 0x09, 0x01, + 0x00, 0xFF, NB_HOST_REG(0x5C), 0x10, 0x10, + 0x00, 0xFF, NB_HOST_REG(0x5F), 0x0E, 0x08, + 0x00, 0xFF, NB_HOST_REG(0x92), 0xFF, 0x04, // ACPI Base addr + 0x00, 0xFF, NB_HOST_REG(0x97), 0x01, 0x01, // APIC MSI + 0x00, 0xFF, NB_HOST_REG(0x99), 0x02, 0x00, // APIC MSI + //GTL + 0x00, 0xFF, NB_HOST_REG(0x73), 0xFF, 0x66, + 0x00, 0xFF, NB_HOST_REG(0xB2), 0xFF, 0x33, + 0x00, 0xFF, NB_HOST_REG(0xB3), 0xFF, 0x33, + 0x00, 0xFF, NB_HOST_REG(0xBC), 0xFF, 0x33, + 0x00, 0xFF, NB_HOST_REG(0xBD), 0xFF, 0x33, + 0x00, 0xFF, NB_HOST_REG(0xC5), 0x30, 0x20, + 0x00, 0xFF, NB_HOST_REG(0xC8), 0x10, 0x00, + + + // End of Table + {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table + +}; + +static const struct VIA_PCI_REG_INIT_TABLE mBusControllerInitTable[] = { + // D17F0: LPC + 0x00, 0xFF, SB_LPC_REG(0x40), 0x44, 0x44, // Enable I/O Recovery Time, 4D0/4D1 Support + 0x00, 0xFF, SB_LPC_REG(0x42), 0xF8, 0xF0, // ENLBUF, GINTREN, FLUSHEN, RBRSTRD + 0x00, 0xFF, SB_LPC_REG(0x43), 0x0F, 0x0B, // RENDTX, ENWBTO, ENRBTO + // 0x00, 0xFF, SB_LPC_REG(0x46), 0x00, 0x10, // It is related to INTH# + //0x00, 0xFF, SB_LPC_REG(0x48), 0x00, 0x0C, //RMRPW, RIRPW // Reserved in 409 by Eric + + // Internal RTC, Mouse, Keyboard // set in PEI by Eric + //0x00, 0xFF, SB_LPC_REG(0x51), 0x10, 0x0D, // Enable Internal RTC, Internal PS2 Mouse/Keyboard + + // RTC + 0x00, 0xFF, SB_LPC_REG(0x58), 0x00, 0x01, //RTC Rx32 Map to Centrury Byte + + // 0x00, 0xFF, SB_LPC_REG(0x40), 0x00, 0x02, // RDMEGAS + //0x00, 0xFF, SB_LPC_REG(0x4E), 0x00, 0x08, // Enable RTC port 74/75, ENEXRTC // set in PEI by Eric + + // Serial IRQ // set in PEI by Eric + //0x00, 0xFF, SB_LPC_REG(0x52), 0x0F, 0x09, // Enable Serial IRQ, Start Frame Width is 6 PCI Clock. + + // Enable 4D0h/4D1h Port + //0x00, 0xFF, SB_LPC_REG(0x40), 0x00, 0x04, // EISAXT // set in PEI by Eric + + // Config ROM Interface + // Enable SPI/Set SPI Memory Base Address + // It is initialized in PEI Phase + + // Subsystem ID/Vendor ID Back Door + 0x00, 0xFF, SB_LPC_REG(0x70), 0xFF, 0x06, + 0x00, 0xFF, SB_LPC_REG(0x71), 0xFF, 0x11, + 0x00, 0xFF, SB_LPC_REG(0x72), 0xFF, 0x09, + 0x00, 0xFF, SB_LPC_REG(0x73), 0xFF, 0x34, + + 0x00, 0xFF, SB_LPC_REG(0x4C), 0xC0, 0x40, + 0x00, 0xFF, SB_LPC_REG(0x5B), 0x00, 0x51, // Orgin value 0x53, modify for 409 by Eric + 0x00, 0xFF, SB_LPC_REG(0x67), 0x03, 0x01, + + + 0x00, 0xFF, SB_LPC_REG(0x50), 0x7E, 0x00, // Setting PCI device enable + 0x00, 0xFF, SB_LPC_REG(0x51), 0xD0, 0x00, // Setting PCI device enable + 0x00, 0xFF, SB_VLINK_REG(0xD1), 0x04, 0x00, // Setting HDAC enable + {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table +}; + +static const struct VIA_PCI_REG_INIT_TABLE mPCI1InitTable[] = { + //PCI1 Programming Sequence + //(1)Configure D17F7 + 0x00, 0xFF, SB_VLINK_REG(0x04), 0x00, 0x03, + 0x00, 0xFF, SB_VLINK_REG(0x0C), 0x00, 0x08, // Reserved in 409 by Eric + 0x00, 0xFF, SB_VLINK_REG(0x4F), 0x40, 0x41, //RENPPB, RP2CFLSH + 0x00, 0xFF, SB_VLINK_REG(0x77), 0x00, 0x48, //ROP2CFLSH, RFFTMR[1:0]. ROP2CFLSH work with Rx4F[0](RP2CFLSH) assertion + // 0x00, 0xFF, SB_VLINK_REG(0x51), 0x00, 0x80, //RSUB_DEC_P2P, RSUBDECOD(Window xp). If Bit7 is set, PCI lock will occured. + //0x00, 0xFF, SB_VLINK_REG(0x51), 0x00, 0x81, //RSUB_DEC_P2P, RSUBDECOD(Window Vista) + //(2)Configure D19F0 + 0x00, 0xFF, SB_P2PB_REG(0x04), 0x00, 0x07, + + //(3)Performance Recommended Setting + + //Save Power + 0x00, 0xFF, SB_VLINK_REG(0xE2), 0x1F, 0x01, + 0x00, 0xFF, SB_VLINK_REG(0xE3), 0xF1, 0x5E, + 0x00, 0xFF, SB_VLINK_REG(0x74), 0x40, 0x00, + //Enhence Host To PCI cycle performance and PCI-To-Host Cycle performance + 0x00, 0xFF, SB_VLINK_REG(0x70), 0x00, 0x82, + 0x00, 0xFF, SB_VLINK_REG(0x71), 0x30, 0xC0, + 0x00, 0xFF, SB_VLINK_REG(0x72), 0x00, 0xEE, + + //Cycle Control + 0x00, 0xFF, SB_VLINK_REG(0x73), 0x00, 0x01, + 0x00, 0xFF, SB_VLINK_REG(0x74), 0x00, 0x0C, + //Arbitration control + 0x00, 0xFF, SB_VLINK_REG(0x75), 0x00, 0x0F, + 0x00, 0xFF, SB_VLINK_REG(0x76), 0x00, 0xD0, + {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table +}; + +static const struct VIA_PCI_REG_INIT_TABLE mCCAInitTable[] = { + + 0x00, 0xFF, SB_VLINK_REG(0xFC), 0x02, 0x08, //RVWREQ, ROABKDOOR + + //CCA's Register Programming sequence + 0x00, 0xFF, SB_VLINK_REG(0x50), 0x00, 0x08, //Config Azalia's upstream cycle high priority and other low priority + 0x00, 0xFF, SB_VLINK_REG(0x51), 0x40, 0x80, //Disable bypass asynchronous circuit + 0x00, 0xFF, SB_VLINK_REG(0x52), 0x00, 0x11, // Set SM Internal Device and HDAC Occupy Timer + 0x00, 0xFF, SB_VLINK_REG(0x53), 0x00, 0x11, // Set SM Internal Device and HDAC Promote Timer + 0x00, 0xFF, SB_VLINK_REG(0x54), 0xFF, 0x02, //Use SB internal devices's original REQ + 0x00, 0xFF, SB_VLINK_REG(0x73), 0x10, 0x00, //RPINOWSC. Enable APIC Cycle Block P2C Write Cycle + 0x00, 0xFF, SB_VLINK_REG(0x74), 0x00, 0x3C, //RLCKXP2C, RFSBVK. + 0x00, 0xFF, SB_VLINK_REG(0xE1), 0x07, 0x00, //RBLKAPIC, RAZC3 + 0x00, 0xFF, SB_VLINK_REG(0x7C), 0x04, 0x02, //RNMIFSB, RFSBVK + 0x00, 0xFF, SB_VLINK_REG(0xE0), 0xF0, 0x90, //RCCA_NEWCLK, RCCA_CLKON. Use New dynamic clock scheme + 0x00, 0xFF, SB_VLINK_REG(0xE7), 0xFF, 0x00, //Let CCA use dynamic clock. + //The CCA is also relate to D17F0 + // 0x00, 0xFF, SB_LPC_REG(0x49), 0x1F, 0x00, //Disable CCA Test Mode + 0x00, 0xFF, SB_LPC_REG(0x74), 0xFF, 0x00, // Let DMA cycles from internal devices directly go to NB // Reserved in 409 by Eric + {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table +}; + +static const struct VIA_PCI_REG_INIT_TABLE IDEC_INIT[] = { + + // 0x00, 0xFF, SB_IDEC_REG(0x09), 0x00, 0x05, //set to native mode + 0x00, 0xFF, SB_IDEC_REG(0x04), 0x00, 0x07, + //0x00, 0xFF, SB_VLINK_REG(0x7C), 0x00, 0x7F, + {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table + +}; + +static const struct VIA_PCI_REG_INIT_TABLE mSbApicInitTable[] = { + 0x00, 0xFF, SB_LPC_REG(0x4D), 0x04, 0x00, + 0x00, 0xFF, SB_LPC_REG(0x5B), 0x0E, 0x00, + 0x00, 0xFF, SB_LPC_REG(0x6C), 0x08, 0x00, + 0x00, 0xFF, SB_LPC_REG(0x58), 0x00, 0x40, + 0x00, 0xFF, SB_VLINK_REG(0x74), 0x00, 0x04, + //0x00, 0xFF, SB_VLINK_REG(0x7C), 0x00, 0x7F, + {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table + +}; + + + +void AcpiInit(void) +{ + device_t_raw rawdevice = 0; + u8 sbchiprev; + rawdevice = PCI_RAWDEV(0, 0x11, 0); + // Set the PMIO base io address + pci_rawmodify_config16(rawdevice, 0x88, VX800_ACPI_IO_BASE, + 0xff80); + // Enable PMIO + pci_rawmodify_config16(rawdevice, 0x80, 0x8000, 0x8000); + // Enable Soft Resume + outw(inw(VX800_ACPI_IO_BASE + 0x04) | 0x8000, + VX800_ACPI_IO_BASE + 0x04); + + // Get SB Revision + sbchiprev = pci_rawread_config8(rawdevice, 0xf6); + printk_debug("SB chip revision =%x\n", sbchiprev); + + // Fill Register Table + via_pci_inittable(sbchiprev, mSbStage1InitTbl); + + // Close all SMI/Io Traps + outb(0x00, VX800_ACPI_IO_BASE + 0x42); + +} + + +void Stage2NbInit(void) +{ + device_t_raw rawdevice = 0; + u8 nbchiprev; + u32 subid = 0; + rawdevice = PCI_RAWDEV(0, 0, 4); + nbchiprev = pci_rawread_config8(rawdevice, 0xf6); + printk_debug("NB chip revision =%x\n", nbchiprev); + + via_pci_inittable(nbchiprev, mNbStage2InitTable); + + rawdevice = PCI_RAWDEV(0, 0, 0); + + subid = PCI_DEVICE_ID_VIA_VX855_D0F0 << 16 + PCI_VENDOR_ID_VIA; + pci_rawwrite_config32(rawdevice, 0x2C, subid); + + //vx855 NB no pcie bus + //vx855 NB no apic + +} + +void IDECSupportOption(u8 sbchiprev) +{ + pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0, 0x08); + + pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x45, 0x00, 0x80); + pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x0A, 0x01, 0xFF); + pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x45, 0x80, 0x00); + pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x40, 0x02, 0x00); + + pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x09, 0x00, 0x05); //COMPATIBLE MODE +// pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x09, 0x05, 0x05);//native MODE + + via_pci_inittable(sbchiprev, IDEC_INIT); +} + +void InitIDEC(u8 sbchiprev) +{ + IDECSupportOption(sbchiprev); +} + + +void InitUHCI(u8 Number, u8 bEnable) +{ + u8 Mask, Value; + u16 D16; + u8 BaseAddress; + u8 BitShift; + // USB Device 16 + // Function : Number + // 0 : 0 + // 1 : 1 + // 2 : 2 + // The BitShift is got from Datasheet. + + switch (Number) { + case 0: + BaseAddress = 0; + BitShift = 4; + break; + case 1: + BaseAddress = 1; + BitShift = 5; + break; + case 2: + default: + BaseAddress = 2; + BitShift = 2; + break; + } + + if (bEnable) { + Mask = 0x1 << BitShift; + Value = 0x0; + } else { + Mask = 0x0; + Value = 0x1 << BitShift; + } + pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, Value, Mask); + + + if (bEnable) { + D16 = 0; + pci_rawwrite_config16(PCI_RAWDEV(0, 0x10, BaseAddress), + 0x20, D16); + + // Config some Control Register + Mask = 0x00; + Value = 0x12; + + pci_rawmodify_config8(PCI_RAWDEV(0, 0x10, BaseAddress), + 0x41, Value, Mask); + Mask = 0x00; + Value = 0xEB; + pci_rawmodify_config8(PCI_RAWDEV(0, 0x10, BaseAddress), + 0x4B, Value, Mask); + } + return; +} + +static const struct VIA_PCI_REG_INIT_TABLE mEHCIInitTable[] = { + //EHCI + 0x00, 0xFF, SB_EHCI_REG(0x43), 0x00, 0xC0, + 0x00, 0xFF, SB_EHCI_REG(0x50), 0x00, 0x80, + 0x00, 0xFF, SB_EHCI_REG(0x48), 0x20, 0x9E, + 0x00, 0xFF, SB_EHCI_REG(0x49), 0x10, 0x68, + 0x00, 0xFF, SB_EHCI_REG(0x4B), 0x00, 0x69, + 0x00, 0xFF, SB_EHCI_REG(0x4D), 0x00, 0x94, + 0x00, 0xFF, SB_EHCI_REG(0x52), 0x08, 0x00, + 0x00, 0xFF, SB_EHCI_REG(0x5A), 0x00, 0x8A, + 0x00, 0xFF, SB_EHCI_REG(0x5B), 0x00, 0x89, + 0x00, 0xFF, SB_EHCI_REG(0x5C), 0x00, 0x03, + 0x00, 0xFF, SB_EHCI_REG(0x5D), 0x00, 0x9A, + 0x00, 0xFF, SB_EHCI_REG(0x5E), 0x00, 0x00, + 0x00, 0xFF, SB_EHCI_REG(0x6B), 0x00, 0x00, + 0x00, 0xFF, SB_EHCI_REG(0x6D), 0x00, 0x00, + 0x00, 0xFF, SB_EHCI_REG(0x6F), 0xF0, 0x00, + 0x00, 0xFF, SB_EHCI_REG(0x4E), 0x01, 0x01, + 0x00, 0xFF, SB_EHCI_REG(0x4F), 0x00, 0x11, + {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table + +}; + +void InitEHCI(u8 Number, u8 bEnable) +{ + u8 Mask, Value; + u8 EHCIRevision; + + if (bEnable) { + Mask = 0x1 << 1; + Value = 0x0; + } else { + Mask = 0x0; + Value = 0x1 << 1; + } + pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, Value, Mask); + + + if (bEnable) { + // Get Chipset Revision + EHCIRevision = + pci_rawread_config8(PCI_RAWDEV(0, 0x10, 4), 0xF6); + printk_debug("EHCI Revision =%x\n", EHCIRevision); + via_pci_inittable(EHCIRevision, mEHCIInitTable); + } +} + +#define TRUE 1 +void InitUSBC(u8 sbchiprev) +{ + InitUHCI(0, TRUE); + InitUHCI(1, TRUE); + InitUHCI(2, TRUE); + InitEHCI(0, TRUE); +} + +void WriteSbApicIndexedReg(u8 Idx, u32 Data) +{ + u32 Data32; + u32 ApicIdxAdr = VX800SB_APIC_BASE; + u32 ApicDataAdr = VX800SB_APIC_BASE + VX800SB_APIC_DATA_OFFSET; + *((u8 *) ApicIdxAdr) = Idx; + Data32 = (*((u32 *) ApicDataAdr)); //this read is needed when write APIC ID ,dont know why. + Data32 = Data; + *((u32 *) ApicDataAdr) = Data32; +} + +void SbApicMmioRegInit(void) +{ + u32 Offset; + WriteSbApicIndexedReg(3, 1); + WriteSbApicIndexedReg(0, 4); + for (Offset = 0x10; Offset < VX800SB_APIC_ENTRY_NUMBER; + Offset += 2) { + WriteSbApicIndexedReg(Offset + 1, 0); + WriteSbApicIndexedReg(Offset, 0x10000); + } +} + +void SbApicInit(u8 sbchiprev) +{ + via_pci_inittable(sbchiprev, mSbApicInitTable); + SbApicMmioRegInit(); +} + +void SbAcpiInit(void) +{ + u8 Mask, Value; + // Enable ACPI + Mask = 0x01; + Value = 0x01; + io_rawmodify_config8(VX800_ACPI_IO_BASE + 0x04, Value, Mask); +} + +#define HPET_ENABLE_BIT 0x80 +#define R_SB_HPET_CONTROL 0x68 +#define HPET_BASE_ADDRESS 0xFED0 // 0xFED00000 +#define R_SB_HPET_ADDRESS 0x69 + +void HpetInit(void) +{ + u8 HpetEnable = HPET_ENABLE_BIT; + u16 HpetBase = HPET_BASE_ADDRESS; + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), R_SB_HPET_CONTROL, + HpetEnable); + pci_rawwrite_config16(PCI_RAWDEV(0, 0x11, 0), + R_SB_HPET_ADDRESS + 1, HpetBase); +} + +static const struct VIA_PCI_REG_INIT_TABLE mPMUInitTable[] = { + // Power Management + 0x00, 0xFF, SB_LPC_REG(0x80), 0x00, 0x20, + 0x00, 0xFF, SB_LPC_REG(0x8C), 0x02, 0x00, + 0x00, 0xFF, SB_LPC_REG(0x8D), 0x00, 0x18, + + //Miscellaneous Configuration 1 + 0x00, 0xFF, SB_LPC_REG(0x94), 0xF0, 0x28, + 0x00, 0xFF, SB_LPC_REG(0x95), 0x00, 0xC1, + 0x00, 0xFF, SB_LPC_REG(0x96), 0xFF, 0x10, + 0x00, 0xFF, SB_LPC_REG(0x97), 0x00, 0xB2, + + //Voltage Change Function Enable + 0x00, 0xFF, SB_LPC_REG(0x9F), 0x00, 0x21, + //Internal PCIe and NM PLL Control + 0x00, 0xFF, SB_LPC_REG(0xE2), 0x00, 0xEA, + + 0x00, 0xFF, SB_LPC_REG(0xE7), 0x00, 0x80, + {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table +}; + +void InitPMU(u8 sbchiprev) +{ + u8 Mask, Value; + // Set PMU Registers + via_pci_inittable(sbchiprev, mPMUInitTable); + + + // Set SCI IRQ and its level trigger + Mask = 0x0F; + Value = 0x09; + pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x82, Value, Mask); + + Mask = 0x02; + Value = 0x02; + io_rawmodify_config8(0x4d1, Value, Mask); +} + +#define R_SB_MULTI_FUNCTION_SELECT_1 0xE4 +#define R_SB_CX_STATE_BREAK_EVENT_ENABLE_1 0xE6 +#define PMIO_PROCESSOR_CONTROL 0x26 +#define R_SB_PCI_ARBITRATION_2 0x76 +#define R_SB_AUTO_SWITCH_P_STATE 0x8A + +void InitCPUCStatueSupport() +{ + u8 Mask, Value; + + // Config Cx State + // Now it is C2 & C4 Up Down Mode + Mask = 0xFF; + Value = 0x30; + pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), R_SB_CX_STATE_BREAK_EVENT_ENABLE_1, Value, Mask); //SB_LPC_REG + + Mask = 0xFF; + Value = 0x1F; + io_rawmodify_config8(VX800_ACPI_IO_BASE + PMIO_PROCESSOR_CONTROL, + Value, Mask); + + Mask = 0x00; + Value = 0x80; + pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 7), R_SB_PCI_ARBITRATION_2, Value, Mask); //SB_VLINK_REG + + Mask = 0xFF; + Value = 0x00; + pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), R_SB_MULTI_FUNCTION_SELECT_1, Value, Mask); //SB_VLINK_REG + + Mask = 0xFF; + Value = 0x1F; + pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), R_SB_AUTO_SWITCH_P_STATE, Value, Mask); //SB_VLINK_REG +} + +void InitSBPM(u8 sbchiprev) +{ + InitPMU(sbchiprev); + SbAcpiInit(); + InitCPUCStatueSupport(); +} + +void Stage2SbInit(void) +{ + device_t_raw rawdevice = 0; + u8 sbchiprev; + + rawdevice = PCI_RAWDEV(0, 11, 0); + sbchiprev = pci_rawread_config8(rawdevice, 0xf6); + printk_debug("SB chip revision =%x\n", sbchiprev); + + //SBBasicInit + via_pci_inittable(sbchiprev, mBusControllerInitTable); + via_pci_inittable(sbchiprev, mPCI1InitTable); + via_pci_inittable(sbchiprev, mCCAInitTable); + + + InitIDEC(sbchiprev); + + InitUSBC(sbchiprev); + + InitSBPM(sbchiprev); + + SbApicInit(sbchiprev); + + HpetInit(); + + //pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x76, 0);//SB_VLINK_REG + +} + + +void init_VIA_chipset(void) +{ + printk_debug("In: init_VIA_chipset\n"); + //1.nbstage1 is done in raminit. + //2.sbstage1 + AcpiInit(); + //3.nbstage2 + Stage2NbInit(); + + //4.sbstage2 + Stage2SbInit(); + + //5.open hdac + pci_rawmodify_config32(PCI_RAWDEV(0, 0x11, 7), 0xd1, 0, 0x04); + printk_debug("End: init_VIA_chipset\n"); +} + +/** + * @brief Main function of the DRAM part of coreboot. + * + * Coreboot is divided into Pre-DRAM part and DRAM part. + * + * + * Device Enumeration: + * In the dev_enumerate() phase, + */ + +void hardwaremain(int boot_complete) +{ + struct lb_memory *lb_mem; +#if HAVE_ACPI_RESUME == 1 + void *wake_vec; +#endif + + u16 tmp; + tmp = inw(VX800_ACPI_IO_BASE + 0x04); + acpi_sleep_type = ((tmp & (7 << 10)) >> 10) == 1 ? 3 : 0; + + u8 y, x; + init_VIA_chipset(); + printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__); + +#if 0 + + pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), 0xa3, 0x80); + pci_rawwrite_config8(PCI_RAWDEV(0, 17, 7), 0x60, 0x20); + pci_rawwrite_config8(PCI_RAWDEV(0, 17, 7), 0xE5, + pci_rawread_config8(PCI_RAWDEV(0, 3, 0), + 0x88)); +#endif + + pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x51, 0x40, 0x40); //close CE-ATA (Consumer Electronics-ATA) and NFC + + //pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x0, 0x40);//open USB Device Mode Enable + pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x40, 0x40); //close USB Device Mode + + //pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x04, 0x04);//close USB 1.1 UHCI Port 4-5 + //pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x02, 0x02);//close USB 2.0 ehci + + + //pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x00, 0x76);//open all usb and usb mode + //pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x76, 0x76);//close all usb + + printk_info("=================SB 50h=%02x \n", + pci_rawread_config8(PCI_RAWDEV(0, 0x11, 0), 0x50)); + + + /* FIXME: Is there a better way to handle this? */ + init_timer(); + printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__); + + /* Find the devices we don't have hard coded knowledge about. */ + dev_enumerate(); + printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__); +#if 0 + x = y = 0; + printk_info("dump ehci3 \n"); + for (; x < 16; x++) { + y = 0; + for (; y < 16; y++) { + printk_info("%02x ", + pci_rawread_config8(PCI_RAWDEV + (0, 0x10, 4), + x * 16 + y)); + } + printk_info("\n"); + } +#endif + + post_code(0x66); + /* Now compute and assign the bus resources. */ + dev_configure(); + printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__); +#if 0 + x = y = 0; + printk_info("dump ehci3 \n"); + for (; x < 16; x++) { + y = 0; + for (; y < 16; y++) { + printk_info("%02x ", + pci_rawread_config8(PCI_RAWDEV + (0, 0x10, 4), + x * 16 + y)); + } + printk_info("\n"); + } +#endif + + post_code(0x88); + /* Now actually enable devices on the bus */ + dev_enable(); + printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__); + /* And of course initialize devices on the bus */ +#if 0 + x = y = 0; + printk_info("dump ehci3 \n"); + for (; x < 16; x++) { + y = 0; + for (; y < 16; y++) { + printk_info("%02x ", + pci_rawread_config8(PCI_RAWDEV + (0, 0x10, 4), + x * 16 + y)); + } + printk_info("\n"); + } +#endif + + dev_initialize(); + post_code(0x89); + printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__); + + +// pci_rawwrite_config16(PCI_RAWDEV(0, 0xf, 0), 0xBA, 0x0571); + +#if 0 + x = y = 0; + printk_info("dump ehci3 \n"); + for (; x < 16; x++) { + y = 0; + for (; y < 16; y++) { + printk_info("%02x ", + pci_rawread_config8(PCI_RAWDEV + (0, 0x10, 4), + x * 16 + y)); + } + printk_info("\n"); + } +#endif + + +#if 0 + + y = pci_rawread_config8(PCI_RAWDEV(0, 0xf, 0), 0x0d); + y &= 0x0f; + y |= 0x40; + pci_rawwrite_config8(PCI_RAWDEV(0, 0xf, 0), 0x0d, y); +#endif + +#if 0 + + + static const d0f0pcitable[5] = { 0xD0, 0, 0, 0, 0xFD }; + static const d0f2pcitable[16 * 7 + 1] = { + 0x88, 0xF8, 0xEF, 0x44, 0x7C, 0x24, 0x63, 0x01, 0x00, 0x09, + 0x00, 0x00, 0x10, 0xA2, 0x88, 0xCE, + 0xFF, 0x0F, 0x00, 0xAA, 0x0A, 0x00, 0x00, 0x00, 0x01, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xCC, 0x66, 0xAA, 0x55, 0x30, 0x38, 0x0C, 0x00, 0x00, 0x00, + 0x00, 0x22, 0x00, 0xAA, 0x00, 0x00, + 0x44, 0x44, 0x55, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x0B, 0x00, 0x08, 0x00, 0x00, 0x00, 0x0A, 0x01, 0x41, 0x06, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x88, 0x56, 0x70, 0x77, 0x77, 0x07, 0x77, 0x77, 0x04, + 0x77, 0x77, 0x77, 0x77, 0x77, 0x77, + 0x77, 0x77, 0x33, 0x33, 0x77, 0x77, 0x77, 0x77, 0x77, 0x77, + 0x77, 0x77, 0x44, 0x44, 0x14, 0x00, + 0x75 + }; + + static const d0f4pcitable[16 * 6 + 3] = { + 0x30, 0x00, 0x00, + 0xFF, 0xFF, 0xCC, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x80, 0xE0, 0xD6, 0x80, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x01, 0x02, 0x03, 0x04, 0x04, 0x00, 0x00, 0x04, 0x04, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x12, 0x12, 0x00, 0x00, 0x08, 0xF4, + 0x01, 0x01, 0x79, 0x79, 0x0A, 0x00, + }; + static const d0f5pcitable[16 * 10] = { + 0x13, 0x0E, 0x00, 0x00, 0xD2, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x09, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x18, 0x9A, 0x00, 0x81, 0x28, 0xC0, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x40, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x26, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + }; + + static const d0f7pcitable[16 * 9] = { + 0x00, 0x2A, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x29, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + }; + static const d1f0pcitable[3] = { + 0x01, 0x80, 0x40 + }; + + static const dcf0pcitable[96] = { + 0x10, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x00, 0xC2, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, + 0x40, 0x01, 0x03, 0x01, 0x7E, 0x01, + 0x08, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF9, + 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, + }; + + static const d10f4pcitable[48] = { + 0x00, 0x20, 0x43, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x9E, 0x68, + 0x00, 0x09, 0x13, 0x94, 0x03, 0x10, + 0x80, 0x60, 0x11, 0xBF, 0x00, 0xFF, 0x0F, 0x00, 0x04, 0x0B, + 0xCC, 0xCC, 0x00, 0xCC, 0x00, 0x00, + 0x20, 0x20, 0x01, 0x00, 0x05, 0x00, 0x00, 0x00, 0x01, 0x00, + 0x00, 0x00, 0x00, 0x20, 0x00, 0xC0, + }; + + static const d11f0pcitable[16 * 12] = { + 0x44, 0x40, 0xF0, 0x0B, 0x00, 0x00, 0x00, 0x03, 0x00, 0x20, + 0x00, 0x00, 0x04, 0x00, 0x08, 0x00, + 0xC1, 0x4D, 0x19, 0x80, 0x00, 0x00, 0x00, 0x00, 0x60, 0x00, + 0x00, 0x51, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x80, 0x00, + 0xD0, 0xFE, 0x00, 0x00, 0x00, 0x00, + 0x06, 0x11, 0x09, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, + 0x20, 0x84, 0x49, 0x00, 0x88, 0x00, 0x00, 0x00, 0x01, 0x08, + 0x1F, 0x00, 0x07, 0x1A, 0x00, 0x00, + 0x00, 0x6E, 0xBC, 0x88, 0x28, 0xC1, 0x10, 0x80, 0x00, 0x80, + 0x20, 0x88, 0x00, 0x00, 0x00, 0xAD, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, + 0x00, 0x00, 0x10, 0xD0, 0xFE, 0x90, + 0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x04, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0xE7, 0x03, 0xA0, 0x60, 0x20, 0xC0, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, + }; + + static const d11f7pcitable[192] = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x80, 0x43, + 0x08, 0x80, 0x11, 0x11, 0x02, 0x0F, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x80, 0x00, 0x00, 0x20, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, + 0x82, 0xC8, 0xEE, 0x01, 0x0C, 0x0F, 0xD0, 0x48, 0x00, 0x00, + 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, + 0x07, 0x00, 0x21, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x93, 0x08, 0x00, 0x5E, 0x00, 0x80, 0x29, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x48, 0x00, 0x00, 0x00, + }; + + +#define OPTION_1 1 +#define NOOPTION_1 1 +#ifdef OPTION_1 + static const OPTION_1_d11f0pcitable[16 * 12] = { + 0x44, 0x80, 0xf0, 0x0b, 0x00, 0x00, 0x00, 0x03, 0x00, 0x20, + 0x00, 0x00, 0x04, 0x01, 0x08, 0x00, + 0xc0, 0x4d, 0x19, 0x80, 0x00, 0x00, 0x00, 0x00, 0x60, 0x00, + 0x00, 0x53, 0x00, 0xfe, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x04, 0x80, 0x00, + 0xd0, 0xfe, 0x00, 0x00, 0xdf, 0x00, + 0x06, 0x11, 0x53, 0x83, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x20, 0x84, 0x4a, 0x00, 0xda, 0x40, 0x00, 0x00, 0x01, 0x40, + 0x1f, 0x00, 0x07, 0x18, 0x00, 0x00, + 0x00, 0x2e, 0xbc, 0x00, 0x28, 0xc1, 0x10, 0x80, 0x00, 0x80, + 0x08, 0x88, 0x00, 0x00, 0x00, 0xad, + 0x06, 0x11, 0x53, 0x83, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x34, 0x00, 0x00, 0x00, 0x00, 0x40, 0x80, 0x40, + 0x00, 0x00, 0x00, 0xd3, 0xfe, 0x53, + 0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x41, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0xeb, 0x03, 0xa0, 0x60, 0x20, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, + }; +#endif + + + + u8 i; +/* error form ---- but add the chance to resume +for(i=0;i<5;i++){ + pci_rawwrite_config8(PCI_RAWDEV(0, 0, 0), i, d0f0pcitable[i+0xcb]); + } + + +*/ + +/* RO reg +for(i=0;i<5;i++){ + pci_rawwrite_config8(PCI_RAWDEV(0, 0, 0), i+0xcb, d0f0pcitable[i]); + } +*/ + + +//boot ok, resume still err in linux +#if 1 + for (i = 0; i < 9; i++) { + pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), i + 0x50, + d0f2pcitable[i]); + } + //9 is warm reset reg, // boot err in coreboot + for (i = 10; i < 64; i++) { + pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), i + 0x50, + d0f2pcitable[i]); + } + //0x90 look d0f2 appendixA1 , if set this to 09 or 0b, then some ddr2 will crash. + for (i = 65; i < 113; i++) { + pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), i + 0x50, + d0f2pcitable[i]); + } +#endif +#ifdef OPTION_1 + pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), 0x66, 0x09); + pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), 0x70, 0xdd); + // pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), 0x90, 0x09); + pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), 0x92, 0x40); + +#endif + + + +#if 1 + + +//d0f3 +/* */ + // pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0x86, 0x3b); setting, my lspci is 0x29 + //set bit4 cause the ide not be found +// pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0x86, 0x2b); + //set bit1 cause the ide not be found + +// pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0x86, 0x29); + pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0x95, 0x05); + pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0x99, 0x12); + + pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0xde, 0x00); +#endif + +//boot ok, resume err in coreboot +#if 1 + for (i = 0; i < 99; i++) { + pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), i + 0x8d, + d0f4pcitable[i]); + } +#endif + +#ifdef OPTION_1 + pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), 0xe9, 0x90); + pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), 0xec, 0x0); + pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), 0xed, 0x0); + pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), 0xee, 0x0); +#endif + + +#if 1 +//boot ok, resume still err in linux + for (i = 0; i < 160; i++) { + pci_rawwrite_config8(PCI_RAWDEV(0, 0, 5), i + 0x60, + d0f5pcitable[i]); + } + for (i = 0; i < 144; i++) { + pci_rawwrite_config8(PCI_RAWDEV(0, 0, 7), i + 0x60, + d0f7pcitable[i]); + } + for (i = 0; i < 3; i++) { + pci_rawwrite_config8(PCI_RAWDEV(0, 1, 0), i + 0xb0, + d1f0pcitable[i]); + } + for (i = 0; i < 96; i++) { + pci_rawwrite_config8(PCI_RAWDEV(0, 0xc, 0), i + 0x40, + dcf0pcitable[i]); + } +#endif + +#ifdef OPTION_1 + pci_rawwrite_config8(PCI_RAWDEV(0, 0, 7), 0x61, 0x0); + pci_rawwrite_config8(PCI_RAWDEV(0, 0, 7), 0x63, 0x0); + pci_rawwrite_config8(PCI_RAWDEV(0, 0, 7), 0x76, 0xd0); + pci_rawwrite_config8(PCI_RAWDEV(0, 0xc, 0), 0x88, 0x81); + pci_rawwrite_config8(PCI_RAWDEV(0, 0xc, 0), 0x89, 0x01); + pci_rawwrite_config8(PCI_RAWDEV(0, 0xc, 0), 0x8A, 0x60); +#endif + +//d15f0 + + + + +#if 1 + + pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 0), 0x4a, 0xa2); // no affect. + pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 1), 0x4a, 0xa2); + pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 2), 0x4a, 0xa2); + +//boot ok, resume still err in linux, and if disable USB, then all ok +// for(i=0;i<48;i++){ + for (i = 0; i < 44; i++) { + pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 4), i + 0x40, + d10f4pcitable[i]); + } +#endif + +//#ifdef NOOPTION_1 +#if 0 + pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 4), 0x6b, 0x01); + pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 4), 0x6d, 0x00); + pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 4), 0x6e, 0x08); + pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 4), 0x6f, 0x80); +#endif + + + +#if 1 +//before (11.0)is add, s3 resume has already always dead in first resume(more frequenly), and sleep ok +// for(i=0;i<192;i++){ + for (i = 0; i < 6; i++) { + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40, + d11f0pcitable[i]); + } + //6 is uart and dvp vcp, will have // HAVE no com1 ,and no gui show,textmode ok ,s3 sleep ok, resume fail + + //7-18 is my familar part + for (i = 7; i < 18; i++) { //sleep ok ,resume sleep err 2 + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40, + d11f0pcitable[i]); + } + + + for (i = 18; i < 21; i++) { //sleep ok , sleep err 1, resume + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40, + d11f0pcitable[i]); + } + //0x55 56 57 irq intA#B#C# linkA#linkB#linkC# + for (i = 24; i < 27; i++) { //sleep ok , resume sleep err 1 resume 1 + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40, + d11f0pcitable[i]); + } + //5b port 80h + pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x5b, 0x0, 0x08); + // i++; + // pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i+0x40, d11f0pcitable[i]); + + for (i = 28; i < 72; i++) { //sleep ok , resume sleep err 1 , resume 1ci + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40, + d11f0pcitable[i]); + } + //7273ACPI BASE + + for (i = 74; i < 112; i++) { //boot ok, resume still err in linux + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40, + d11f0pcitable[i]); + } + + //B0B4B5 dvp vcp, if copy this ,then no uart, no gui(of unbuntu) + // pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), 0xb0, d11f0pcitable[112]); + i = pci_rawread_config8(PCI_RAWDEV(0, 17, 0), 0xB0); + //multiplex with VCP + // i = i | 0x30; + i = i & 0xf7; + pci_rawwrite_config8(PCI_RAWDEV(0, 17, 0), 0xB0, i); + + + + for (i = 113; i < 114; i++) { //boot ok, resume still err in linux + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40, + d11f0pcitable[i]); + } + + for (i = 115; i < 116; i++) { //boot ok, resume still err in linux + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40, + d11f0pcitable[i]); + } + + + for (i = 118; i < 192; i++) { //boot ok, resume still err in linux + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40, + d11f0pcitable[i]); + } +#endif +#ifdef NOOPTION_1 +// for(i=0;i<192;i++){ + for (i = 0; i < 6; i++) { + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40, + OPTION_1_d11f0pcitable[i]); + } + //6 is uart and dvp vcp, will have // HAVE no com1 ,and no gui show,textmode ok ,s3 sleep ok, resume fail + + //7-18 is my familar part + for (i = 7; i < 18; i++) { // sleep err 2 + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40, + OPTION_1_d11f0pcitable[i]); + } + + for (i = 18; i < 21; i++) { //sleep ok , resume ??? + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40, + d11f0pcitable[i]); + } + //0x55 56 57 irq intA#B#C# linkA#linkB#linkC# + for (i = 24; i < 27; i++) { //sleep ok , resume ??? + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40, + d11f0pcitable[i]); + } + //5b port 80h + i++; + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40, + OPTION_1_d11f0pcitable[i]); + + for (i = 28; i < 72; i++) { //sleep ok , resume??? + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40, + OPTION_1_d11f0pcitable[i]); + } + //7273ACPI BASE + + for (i = 74; i < 112; i++) { //boot ok, resume still err in linux + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40, + OPTION_1_d11f0pcitable[i]); + } + + //B0B4B5 dvp vcp, if copy this ,then no uart, no gui(of unbuntu) + // pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), 0xb0, OPTION_1_d11f0pcitable[112]); + i = pci_rawread_config8(PCI_RAWDEV(0, 17, 0), 0xB0); + //multiplex with VCP + // i = i | 0x30; + i = i & 0xf7; + pci_rawwrite_config8(PCI_RAWDEV(0, 17, 0), 0xB0, i); + + + + for (i = 113; i < 114; i++) { //boot ok, resume still err in linux + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40, + OPTION_1_d11f0pcitable[i]); + } + + for (i = 115; i < 116; i++) { //boot ok, resume still err in linux + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40, + OPTION_1_d11f0pcitable[i]); + } + + for (i = 118; i < 192; i++) { //boot ok, resume still err in linux + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40, + OPTION_1_d11f0pcitable[i]); + } +#endif + +#if 1 + pci_rawwrite_config16(PCI_RAWDEV(0, 0xf, 0), 0xBA, PCI_DEVICE_ID_VIA_VX855_IDE); //5324 + pci_rawwrite_config16(PCI_RAWDEV(0, 0xf, 0), 0xBE, + PCI_DEVICE_ID_VIA_VX855_IDE); + pci_rawwrite_config16(PCI_RAWDEV(0, 0x11, 0), 0xA0, + PCI_VENDOR_ID_VIA); + pci_rawwrite_config16(PCI_RAWDEV(0, 0x11, 0), 0xA2, PCI_DEVICE_ID_VIA_VX855_LPC); //8353 + i = pci_rawread_config8(PCI_RAWDEV(0, 0x11, 0), 0x79); + i &= ~0x40; + i |= 0x40; + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), 0x79, i); + pci_rawwrite_config16(PCI_RAWDEV(0, 0x11, 0), 0x72, + PCI_DEVICE_ID_VIA_VX855_LPC); + + +//boot ok, resume still err in linux + for (i = 0; i < 192; i++) { + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), i + 0x40, + d11f7pcitable[i]); + } +#endif +#ifdef OPTION_1 + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0x61, 0x2a); + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0x63, 0xa0); + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0x64, 0xaa); + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0x84, 0x0); + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0x88, 0x02); + pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0xe6, 0x3f); +#endif + + pci_rawwrite_config8(PCI_RAWDEV(0, 0x14, 0), 0x40, 0x20); + pci_rawwrite_config8(PCI_RAWDEV(0, 0x14, 0), 0x41, 0x31); + + + +#ifdef OPTION_1 + pci_rawwrite_config8(PCI_RAWDEV(0, 0x14, 0), 0x40, 0x00); +#endif + + +#endif + + u8 i911; + //disable CHB L.L + //set VGA memory selection + i911 = pci_rawread_config8(PCI_RAWDEV(0, 0x1, 0), 0xb0); + i911 &= 0xF8; + //ByteVal |= 0x03; + i911 |= 0x01; + pci_rawwrite_config8(PCI_RAWDEV(0, 0x1, 0), 0xb0, i911); + + +#if 1 + struct device *dev; + printk_info("=========zjldump all devices...\n"); + for (dev = all_devices; dev; dev = dev->next) { + if (dev->path.type == DEVICE_PATH_PCI) { + printk_debug("%s dump\n", dev_path(dev)); + x = y = 0; + for (; x < 16; x++) { + y = 0; + for (; y < 16; y++) { + printk_info("%02x ", + pci_read_config8(dev, + x * + 16 + + y)); + } + printk_info("\n"); + } + + } + printk_info("\n"); + } +#endif + + + + + //pci_rawmodify_config8(PCI_RAWDEV(0, 0x10, 4), 0x04, 0x17, 0x17);// +// pci_rawmodify_config8(PCI_RAWDEV(0, 0x10, 4), 0x0c, 0x08, 0xff);/// + + + +}
Added: trunk/coreboot-v2/src/northbridge/via/vx800/northbridge.c =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/northbridge.c (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/northbridge.c 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,247 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + part of this file is from cx700 port, part of is from cn700 port, + */ + +#include <console/console.h> +#include <arch/io.h> +#include <stdint.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <stdlib.h> +#include <string.h> +#include <bitops.h> +#include <cpu/cpu.h> +#include "chip.h" +#include "northbridge.h" +#include "vx800.h" + +static void memctrl_init(device_t dev) +{ +/* + set VGA in UMARamSetting.c, not in this function. +*/ +#if 0 + pci_write_config8(dev, 0x85, 0x20); + pci_write_config8(dev, 0x86, 0x2d); + + /* Set up VGA timers */ + pci_write_config8(dev, 0xa2, 0x44); + + /* Enable VGA with a 32mb framebuffer */ + pci_write_config16(dev, 0xa0, 0xd000); + + pci_write_config16(dev, 0xa4, 0x0010); + + //b0: 60 aa aa 5a 0f 00 00 00 08 + pci_write_config16(dev, 0xb0, 0xaa00); + pci_write_config8(dev, 0xb8, 0x08); +#endif +} + +static const struct device_operations memctrl_operations = { + .read_resources = vx800_noop, + .init = memctrl_init, +}; + +static const struct pci_driver memctrl_driver __pci_driver = { + .ops = &memctrl_operations, + .vendor = PCI_VENDOR_ID_VIA, + .device = PCI_DEVICE_ID_VIA_VX855_MEMCTRL, +}; + +static void pci_domain_read_resources(device_t dev) +{ + struct resource *resource; + + printk_spew("Entering vx800 pci_domain_read_resources.\n"); + + /* Initialize the system wide io space constraints */ + resource = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0)); + resource->limit = 0xffffUL; + resource->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | + IORESOURCE_ASSIGNED; + + /* Initialize the system wide memory resources constraints */ + resource = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0)); + resource->limit = 0xffffffffULL; + resource->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | + IORESOURCE_ASSIGNED; + + printk_spew("Leaving vx800 pci_domain_read_resources.\n"); +} + +static void ram_resource(device_t dev, unsigned long index, + unsigned long basek, unsigned long sizek) +{ + struct resource *resource; + + if (!sizek) { + return; + } + resource = new_resource(dev, index); + resource->base = ((resource_t) basek) << 10; + resource->size = ((resource_t) sizek) << 10; + resource->flags = IORESOURCE_MEM | IORESOURCE_CACHEABLE | + IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED; +} + +static void tolm_test(void *gp, struct device *dev, struct resource *new) +{ + struct resource **best_p = gp; + struct resource *best; + best = *best_p; + if (!best || (best->base > new->base)) { + best = new; + } + *best_p = best; +} + +static u32 find_pci_tolm(struct bus *bus) +{ + print_debug("Entering find_pci_tolm\n"); + struct resource *min; + u32 tolm; + min = 0; + search_bus_resources(bus, IORESOURCE_MEM, IORESOURCE_MEM, + tolm_test, &min); + tolm = 0xffffffffUL; + if (min && tolm > min->base) { + tolm = min->base; + } + print_debug("Leaving find_pci_tolm\n"); + return tolm; +} + +static void pci_domain_set_resources(device_t dev) +{ + /* + * the order is important to find the correct ram size. + */ + u8 ramregs[] = { 0x43, 0x42, 0x41, 0x40 }; + device_t mc_dev; + u32 pci_tolm; + u8 reg; + + printk_spew("Entering vx800 pci_domain_set_resources.\n"); + + pci_tolm = find_pci_tolm(&dev->link[0]); + mc_dev = dev_find_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_VX855_MEMCTRL, 0); + + if (mc_dev) { + unsigned long tomk, tolmk; + unsigned char rambits; + u8 i, idx; + + /* + * once the register value is not zero, the ramsize is + * this register's value multiply 64 * 1024 * 1024 + */ + for (rambits = 0, i = 0; i < ARRAY_SIZE(ramregs); i++) { + unsigned char reg; + rambits = pci_read_config8(mc_dev, ramregs[i]); + if (rambits != 0) + break; + } +/* +Get memory size and frame buffer from northbridge's registers. +if register with invalid value we set frame buffer size to 32M for default, but it won't happen. +*/ + reg = pci_read_config8(mc_dev, 0xa1); + reg &= 0x70; + reg = reg >> 4; + /* TOP 1M SM Memory */ + if (reg == 0x0) + tomk = (((rambits << 6) - 32 - VIACONFIG_TOP_SM_SIZE_MB) * 1024); // Set frame buffer 32M for default + else + tomk = + (((rambits << 6) - (4 << reg) - + VIACONFIG_TOP_SM_SIZE_MB) * 1024); + + printk_spew("tomk is 0x%x\n", tomk); + /* Compute the Top Of Low Memory, in Kb */ + tolmk = pci_tolm >> 10; + if (tolmk >= tomk) { + /* The PCI hole does does not overlap the memory. */ + tolmk = tomk; + } + /* Report the memory regions */ + idx = 10; + /* TODO: Hole needed? */ + ram_resource(dev, idx++, 0, 640); /* first 640k */ + /* Leave a hole for vga, 0xa0000 - 0xc0000 */ + ram_resource(dev, idx++, 768, (tolmk - 768)); + } + assign_resources(&dev->link[0]); +} + +static unsigned int pci_domain_scan_bus(device_t dev, unsigned int max) +{ + printk_debug("Entering vx800 pci_domain_scan_bus.\n"); + + max = pci_scan_bus(&dev->link[0], PCI_DEVFN(0, 0), 0xff, max); + return max; +} + +static const struct device_operations pci_domain_ops = { + .read_resources = pci_domain_read_resources, + .set_resources = pci_domain_set_resources, + .enable_resources = enable_childrens_resources, + .init = 0, + .scan_bus = pci_domain_scan_bus, +}; + +static void cpu_bus_init(device_t dev) +{ + initialize_cpus(&dev->link[0]); +} + +static void cpu_bus_noop(device_t dev) +{ +} + +static const struct device_operations cpu_bus_ops = { + .read_resources = cpu_bus_noop, + .set_resources = cpu_bus_noop, + .enable_resources = cpu_bus_noop, + .init = cpu_bus_init, + .scan_bus = 0, +}; + +static void enable_dev(struct device *dev) +{ + printk_spew("In VX800 enable_dev for device %s.\n", dev_path(dev)); + + /* Set the operations if it is a special bus type */ + if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) { + dev->ops = &pci_domain_ops; + pci_set_method(dev); + } else if (dev->path.type == DEVICE_PATH_APIC_CLUSTER) { + dev->ops = &cpu_bus_ops; + } +} + +struct chip_operations northbridge_via_vx800_ops = { + CHIP_NAME("VIA VX800 Chipset") + .enable_dev = enable_dev, +};
Added: trunk/coreboot-v2/src/northbridge/via/vx800/northbridge.h =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/northbridge.h (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/northbridge.h 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,25 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef NORTHBRIDGE_VIA_VX800_H +#define NORTHBRIDGE_VIA_VX800_H + +extern unsigned int vx800_scan_root_bus(device_t root, unsigned int max); + +#endif /* NORTHBRIDGE_VIA_VX800_H */
Added: trunk/coreboot-v2/src/northbridge/via/vx800/raminit.c =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/raminit.c (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/raminit.c 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,74 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <spd.h> +#include <sdram_mode.h> +#include <delay.h> +#include <arch/pci_rawops.h> + +#define DEBUG_RAM_SETUP 1 + + +#ifdef DEBUG_RAM_SETUP +#define PRINT_DEBUG_MEM(x) print_debug(x) +#define PRINT_DEBUG_MEM_HEX8(x) print_debug_hex8(x) +#define PRINT_DEBUG_MEM_HEX16(x) print_debug_hex16(x) +#define PRINT_DEBUG_MEM_HEX32(x) print_debug_hex32(x) +#define DUMPNORTH() dump_pci_device(PCI_DEV(0, 0, 0)) +#else +#define PRINT_DEBUG_MEM(x) +#define PRINT_DEBUG_MEM_HEX8(x) +#define PRINT_DEBUG_MEM_HEX16(x) +#define PRINT_DEBUG_MEM_HEX32(x) +#define DUMPNORTH() +#endif +#include "northbridge/via/vx800/ddr2init/Translatorddr2init.c" +#include "northbridge/via/vx800/ddr2init/DramInit.h" +#include "northbridge/via/vx800/vx800_early_smbus.c" +#include "northbridge/via/vx800/vx800_early_serial.c" +#include "northbridge/via/vx800/ddr2init/DramUtil.h" +#include "northbridge/via/vx800/ddr2init/DramUtil.c" +#include "northbridge/via/vx800/ddr2init/vx800/Detection.c" +#include "northbridge/via/vx800/ddr2init/vx800/FreqSetting.c" +#include "northbridge/via/vx800/ddr2init/vx800/TimingSetting.c" +#include "northbridge/via/vx800/ddr2init/vx800/DRDY_BL.c" +#include "northbridge/via/vx800/ddr2init/vx800/DrivingSetting.c" +#include "northbridge/via/vx800/ddr2init/vx800/ClkCtrl.c" +#include "northbridge/via/vx800/ddr2init/vx800/DevInit.c" +#include "northbridge/via/vx800/ddr2init/vx800/RankMap.c" +#include "northbridge/via/vx800/ddr2init/vx800/DQSSearch.c" +#include "northbridge/via/vx800/ddr2init/vx800/FinalSetting.c" +#include "northbridge/via/vx800/ddr2init/vx800/UMARamSetting.c" +#include "northbridge/via/vx800/ddr2init/DramInit.c" +/* + * Support one dimm with up to 2 ranks + */ + +static void ddr2_ram_setup() +{ + u8 Data; + CB_STATUS Status; + PRINT_DEBUG_MEM("In ddr2_ram_setup\r"); + + Status = DDR2_DRAM_INIT(); + if (CB_SUCCESS != Status) { + PRINT_DEBUG_MEM("Dram init error. Status = %x\r"); + } + +}
Added: trunk/coreboot-v2/src/northbridge/via/vx800/raminit.h =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/raminit.h (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/raminit.h 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,24 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef RAMINIT_H +#define RAMINIT_H + +#define MEMCTRL PCI_DEV(0,0,3) +#endif /* RAMINIT_H */
Added: trunk/coreboot-v2/src/northbridge/via/vx800/romstrap.inc =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/romstrap.inc (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/romstrap.inc 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2004 Tyan Computer + * (Written by Yinghai Lu yhlu@tyan.com for Tyan Computer) + * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file constructs the ROM strap table for K8T890 and K8M890 */ + + .section ".romstrap", "a", @progbits + + .globl __romstrap_start +__romstrap_start: +tblpointer: + .long 0x55aa66cc + .long 0x88012554 + .long 0x77107777 + .long 0x00770814 + + + .long 0x00000000 + .long 0x00000000 + .long 0x00000000 + .long 0x00000000 + +/* + * The pointer to above table should be at 0xffffffd0, + * the table itself MUST be aligned to 128B it seems! + */ +rspointers: + .long tblpointer // It will be 0xffffffd0 + + .globl __romstrap_end + +__romstrap_end: +.previous
Added: trunk/coreboot-v2/src/northbridge/via/vx800/romstrap.lds =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/romstrap.lds (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/romstrap.lds 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,26 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * (Written by Yinghai Lu yinghai.lu@amd.com for AMD) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +SECTIONS { + . = (_ROMBASE + ROM_IMAGE_SIZE - 0x2c) - (__romstrap_end - __romstrap_start); + .romstrap (.): { + *(.romstrap) + } +}
Added: trunk/coreboot-v2/src/northbridge/via/vx800/vga.c =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/vga.c (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/vga.c 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,148 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Note: Some of the VGA control registers are located on the memory controller. + Registers are set both in raminit.c and northbridge.c */ + +#include <console/console.h> +#include <arch/io.h> +#include <stdint.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <stdlib.h> +#include <string.h> +#include <bitops.h> +#include <cpu/cpu.h> +#include <cpu/x86/mtrr.h> +#include <cpu/x86/msr.h> +#include "chip.h" +#include "northbridge.h" +#include "vgachip.h" + +/* PCI Domain 1 Device 0 Function 0 */ + +#define SR_INDEX 0x3c4 +#define SR_DATA 0x3c5 +#define CRTM_INDEX 0x3b4 +#define CRTM_DATA 0x3b5 +#define CRTC_INDEX 0x3d4 +#define CRTC_DATA 0x3d5 + +void write_protect_vgabios(void) +{ + device_t dev; + + printk_info("write_protect_vgabios\n"); + /* there are two possible devices. Just do both. */ + dev = + dev_find_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_VX855_MEMCTRL, 0); + if (dev) + pci_write_config8(dev, 0x80, 0xff); + /*vx855 no th 0x61 reg */ + /*dev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX855_NB_VLINK, 0); + //if(dev) + // pci_write_config8(dev, 0x61, 0xff); */ +} + +extern u8 acpi_sleep_type; +static void vga_init(device_t dev) +{ + uint8_t reg8; + + print_debug("Initiailizing VGA...\n"); + u8 tmp8; +//A20 OPEN + tmp8 = inb(0x92); + tmp8 = tmp8 | 2; + outb(tmp8, 0x92); + + //* + //pci_write_config8(dev, 0x04, 0x07); + //pci_write_config32(dev,0x10, 0xa0000008); + //pci_write_config32(dev,0x14, 0xdd000000); + pci_write_config32(dev, 0x10, VIACONFIG_VGA_PCI_10); + pci_write_config32(dev, 0x14, VIACONFIG_VGA_PCI_14); + pci_write_config8(dev, 0x3c, 0x0a); //same with vx855_lpc.c + //*/ + printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__); + + +#if 1 + printk_debug("INSTALL REAL-MODE IDT\n"); + setup_realmode_idt(); + printk_debug("DO THE VGA BIOS\n"); + + do_vgabios(); + if ((acpi_sleep_type == 3) || (PAYLOAD_IS_SEABIOS == 0)) { + printk_debug("Enable VGA console\n"); + // remove this function since in cn700 it is said "VGA seems to work without this, but crash & burn with it" + //but the existense of vga_enable_console() seems do not hurt my coreboot. XP+ubuntu s3 can resume with and without this function. + //and remove it also do not help my s3 problem: desktop screen have some thin black line, after resuming back to win. + vga_enable_console(); + } +#else +/* Attempt to manually force the rom to load */ + printk_debug("Forcing rom load\r\n"); + pci_rom_load(dev, 0xfff80000); + run_bios(dev, 0xc0000); +#endif + if ((acpi_sleep_type == 3) || (PAYLOAD_IS_SEABIOS == 0)) { + /* It's not clear if these need to be programmed before or after + * the VGA bios runs. Try both, clean up later */ + /* Set memory rate to 200MHz */ + outb(0x3d, CRTM_INDEX); + reg8 = inb(CRTM_DATA); + reg8 &= 0x0f; + reg8 |= (0x3 << 4); + outb(0x3d, CRTM_INDEX); + outb(reg8, CRTM_DATA); + + /* Set framebuffer size to CONFIG_VIDEO_MB mb */ + /*reg8 = (CONFIG_VIDEO_MB/4); + outb(0x39, SR_INDEX); + outb(reg8, SR_DATA); */ + } + printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__); + +} + +static void vga_read_resources(device_t dev) +{ + dev->rom_address = (void *) (0xffffffff - FULL_ROM_SIZE + 1); + dev->on_mainboard = 1; + pci_dev_read_resources(dev); +} + + +static struct device_operations vga_operations = { + .read_resources = vga_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = vga_init, + .ops_pci = 0, +}; + + +static const struct pci_driver vga_driver __pci_driver = { + .ops = &vga_operations, + .vendor = PCI_VENDOR_ID_VIA, + .device = PCI_DEVICE_ID_VIA_VX855_VGA, +};
Added: trunk/coreboot-v2/src/northbridge/via/vx800/vgabios.c =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/vgabios.c (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/vgabios.c 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,862 @@ +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#undef __KERNEL__ +#include <arch/io.h> +#include <string.h> +#include "vgachip.h" + + +/* vgabios.c. Derived from: */ + +/*------------------------------------------------------------ -*- C -*- + * 2 Kernel Monte a.k.a. Linux loading Linux on x86 + * + * Erik Arjan Hendriks hendriks@lanl.gov + * + * This version is a derivative of the original two kernel monte + * which is (C) 2000 Scyld. + * + * Copyright (C) 2000 Scyld Computing Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Portions related to the alpha architecture are: + * + * Copyright(C) 2001 University of California. LA-CC Number 01-67. + * This software has been authored by an employee or employees of the + * University of California, operator of the Los Alamos National + * Laboratory under Contract No. W-7405-ENG-36 with the U.S. + * Department of Energy. The U.S. Government has rights to use, + * reproduce, and distribute this software. If the software is + * modified to produce derivative works, such modified software should + * be clearly marked, so as not to confuse it with the version + * available from LANL. + * + * This software may be used and distributed according to the terms + * of the GNU General Public License, incorporated herein by + * reference to http://www.gnu.org/licenses/gpl.html. + * + * This software is provided by the author(s) "as is" and any express + * or implied warranties, including, but not limited to, the implied + * warranties of merchantability and fitness for a particular purpose + * are disclaimed. In no event shall the author(s) be liable for any + * direct, indirect, incidental, special, exemplary, or consequential + * damages (including, but not limited to, procurement of substitute + * goods or services; loss of use, data, or profits; or business + * interruption) however caused and on any theory of liability, + * whether in contract, strict liability, or tort (including + * negligence or otherwise) arising in any way out of the use of this + * software, even if advised of the possibility of such damage. + * + * $Id: vgabios.c,v 1.5 2004/10/06 17:33:52 rminnich Exp $ + *--------------------------------------------------------------------*/ + +/* Modified to be a self sufficient plug in so that it can be used + without reliance on other parts of coreboot's core + (C) 2005 Nick.Barker9@btinternet.com + + Used initially for epia-m where there are problems getting the bios + emulator to successfully run this bios. +*/ +/* Declare a temporary global descriptor table - necessary because the + Core part of the bios no longer sets up any 16 bit segments */ +__asm__( + /* pointer to original gdt */ + "gdtarg: \n" + " .word gdt_limit \n" + " .long gdt \n" + /* compute the table limit */ + "__mygdt_limit = __mygdt_end - __mygdt - 1 \n" + "__mygdtaddr: \n" + " .word __mygdt_limit \n" + " .long __mygdt \n" + "__mygdt: \n" + /* selgdt 0, unused */ + " .word 0x0000, 0x0000 \n" + " .byte 0x00, 0x00, 0x00, 0x00 \n" + /* selgdt 8, unused */ + " .word 0x0000, 0x0000 \n" + " .byte 0x00, 0x00, 0x00, 0x00 \n" + /* selgdt 0x10, flat code segment */ + " .word 0xffff, 0x0000 \n" + " .byte 0x00, 0x9b, 0xcf, 0x00 \n" + /* selgdt 0x18, flat data segment */ + " .word 0xffff, 0x0000 \n" + " .byte 0x00, 0x93, 0xcf, 0x00 \n" + /* selgdt 0x20, unused */ + " .word 0x0000, 0x0000 \n" + " .byte 0x00, 0x00, 0x00, 0x00 \n" + /* selgdt 0x28 16-bit 64k code at 0x00000000 */ + " .word 0xffff, 0x0000 \n" + " .byte 0, 0x9a, 0, 0 \n" + /* selgdt 0x30 16-bit 64k data at 0x00000000 */ + " .word 0xffff, 0x0000 \n" + " .byte 0, 0x92, 0, 0 \n" + "__mygdt_end: \n"); + +/* Declare a pointer to where our idt is going to be i.e. at mem zero */ +__asm__("__myidt: \n" + /* 16-bit limit */ + " .word 1023 \n" + /* 24-bit base */ + " .long 0 \n" " .word 0 \n"); + +/* The address arguments to this function are PHYSICAL ADDRESSES */ +extern u8 acpi_sleep_type; + +static void real_mode_switch_call_vga(unsigned long devfn) +{ + if ((acpi_sleep_type == 0) && (PAYLOAD_IS_SEABIOS == 1)) + return; + __asm__ __volatile__( + // paranoia -- does ecx get saved? not sure. This is + // the easiest safe thing to do. + " pushal \n" + /* save the stack */ + " mov %esp, __stack \n" + " jmp 1f \n" + "__stack: .long 0 \n" "1:\n" + /* get devfn into %ecx */ + " movl %esp, %ebp \n" + " movl 8(%ebp), %ecx \n" + /* load 'our' gdt */ + " lgdt %cs:__mygdtaddr \n" + /* This configures CS properly for real mode. */ + " ljmp $0x28, $__rms_16bit\n" + "__rms_16bit: \n" + " .code16 \n" + /* 16 bit code from here on... */ + /* Load the segment registers w/ properly configured segment + * descriptors. They will retain these configurations (limits, + * writability, etc.) once protected mode is turned off. */ + " mov $0x30, %ax \n" + " mov %ax, %ds \n" + " mov %ax, %es \n" + " mov %ax, %fs \n" + " mov %ax, %gs \n" + " mov %ax, %ss \n" + /* Turn off protection (bit 0 in CR0) */ + " movl %cr0, %eax \n" + " andl $0xFFFFFFFE, %eax \n" + " movl %eax, %cr0 \n" + /* Now really going into real mode */ + " ljmp $0, $__rms_real\n" + "__rms_real: \n" + /* put the stack at the end of page zero. + * that way we can easily share it between real and protected, + * since the 16-bit ESP at segment 0 will work for any case. + /* Setup a stack */ + " mov $0x0, %ax \n" + " mov %ax, %ss \n" + " movl $0x1000, %eax \n" + " movl %eax, %esp \n" + /* Load our 16 it idt */ + " xor %ax, %ax \n" + " mov %ax, %ds \n" + " lidt __myidt \n" + /* Dump zeros in the other segregs */ + " mov %ax, %es \n" + " mov %ax, %fs \n" + " mov %ax, %gs \n" + " mov $0x40, %ax \n" + " mov %ax, %ds \n" + " mov %cx, %ax \n" + /* run VGA BIOS at 0xc000:0003 */ + " lcall $0xc000, $0x0003\n" + /* if we got here, just about done. + * Need to get back to protected mode */ + " movl %cr0, %eax \n" " orl $0x0000001, %eax\n" /* PE = 1 */ + " movl %eax, %cr0 \n" + /* Now that we are in protected mode jump to a 32 bit code segment. */ + " data32 ljmp $0x10, $vgarestart\n" + "vgarestart:\n" + " .code32\n" + " movw $0x18, %ax \n" + " mov %ax, %ds \n" + " mov %ax, %es \n" + " mov %ax, %fs \n" + " mov %ax, %gs \n" + " mov %ax, %ss \n" + /* restore proper gdt and idt */ + " lgdt %cs:gdtarg \n" + " lidt idtarg \n" + ".globl vga_exit \n" + "vga_exit: \n" + " mov __stack, %esp \n" + " popal \n"); +} + +__asm__(".text\n" "real_mode_switch_end:\n"); +extern char real_mode_switch_end[]; + +/* call vga bios int 10 function 0x4f14 to enable main console + epia-m does not always autosence the main console so forcing it on is good !! */ +void vga_enable_console() +{ + if ((acpi_sleep_type == 0) && (PAYLOAD_IS_SEABIOS == 1)) + return; + __asm__ __volatile__( + /* paranoia -- does ecx get saved? not sure. This is + * the easiest safe thing to do. */ + " pushal \n" + /* save the stack */ + " mov %esp, __stack \n" + /* load 'our' gdt */ + " lgdt %cs:__mygdtaddr \n" + /* This configures CS properly for real mode. */ + " ljmp $0x28, $__vga_ec_16bit\n" + "__vga_ec_16bit: \n" + " .code16 \n" + /* 16 bit code from here on... */ + /* Load the segment registers w/ properly configured segment + * descriptors. They will retain these configurations (limits, + * writability, etc.) once protected mode is turned off. */ + " mov $0x30, %ax \n" + " mov %ax, %ds \n" + " mov %ax, %es \n" + " mov %ax, %fs \n" + " mov %ax, %gs \n" + " mov %ax, %ss \n" + /* Turn off protection (bit 0 in CR0) */ + " movl %cr0, %eax \n" + " andl $0xFFFFFFFE, %eax\n" + " movl %eax, %cr0 \n" + /* Now really going into real mode */ + " ljmp $0, $__vga_ec_real \n" + "__vga_ec_real: \n" + /* put the stack at the end of page zero. + * that way we can easily share it between real and protected, + * since the 16-bit ESP at segment 0 will work for any case. + /* Setup a stack */ + " mov $0x0, %ax \n" + " mov %ax, %ss \n" + " movl $0x1000, %eax \n" + " movl %eax, %esp \n" + /* debugging for RGM */ + " mov $0x11, %al \n" + " outb %al, $0x80 \n" + /* Load our 16 it idt */ + " xor %ax, %ax \n" + " mov %ax, %ds \n" + " lidt __myidt \n" + /* Dump zeros in the other segregs */ + " mov %ax, %ds \n" + " mov %ax, %es \n" + " mov %ax, %fs \n" + " mov %ax, %gs \n" + /* ask bios to enable main console */ + /* set up for int 10 call - values found from X server + * bios call routines */ + " movw $0x4f14,%ax \n" + " movw $0x8003,%bx \n" + " movw $1, %cx \n" + " movw $0, %dx \n" + " movw $0, %di \n" + " int $0x10 \n" + " movb $0x55, %al \n" + " outb %al, $0x80 \n" + /* if we got here, just about done. + * Need to get back to protected mode */ + " movl %cr0, %eax \n" " orl $0x0000001, %eax\n" /* PE = 1 */ + " movl %eax, %cr0 \n" + /* Now that we are in protected mode jump to a 32 bit code segment. */ + " data32 ljmp $0x10, $vga_ec_restart\n" + "vga_ec_restart:\n" + " .code32\n" + " movw $0x18, %ax \n" + " mov %ax, %ds \n" + " mov %ax, %es \n" + " mov %ax, %fs \n" + " mov %ax, %gs \n" + " mov %ax, %ss \n" + /* restore proper gdt and idt */ + " lgdt %cs:gdtarg \n" + " lidt idtarg \n" + " .globl vga__ec_exit \n" + "vga_ec_exit:\n" + " mov __stack, %esp \n" + " popal\n"); +} + +void do_vgabios(void) +{ + device_t dev; + unsigned long busdevfn; + unsigned int rom = 0; + unsigned char *buf; + unsigned int size = 64 * 1024; + int i; + u16 tmp; + u8 tmp8; + + printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__); + + /* clear vga bios data area */ + for (i = 0x400; i < 0x500; i++) { + *(unsigned char *) i = 0; + } + + dev = dev_find_class(PCI_CLASS_DISPLAY_VGA << 8, 0); + + if (!dev) { + printk_debug("NO VGA FOUND\n"); + return; + } + printk_debug("found VGA: vid=%x, did=%x\n", dev->vendor, + dev->device); + + /* declare rom address here - keep any config data out of the way + * of core LXB stuff */ + + rom = 0xffffffff - FULL_ROM_SIZE + 1; + pci_write_config32(dev, PCI_ROM_ADDRESS, rom | 1); + printk_debug("rom base: %x\n", rom); + buf = (unsigned char *) rom; + printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__); + + if ((buf[0] == 0x55) && (buf[1] == 0xaa)) { + memcpy((void *) 0xc0000, buf, size); + + + printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__); + + write_protect_vgabios(); // in northbridge + + // check signature again + buf = (unsigned char *) 0xc0000; + if (buf[0] == 0x55 && buf[1] == 0xAA) { + busdevfn = + (dev->bus->secondary << 8) | dev->path.pci. + devfn; + printk_debug("bus/devfn = %#x\n", busdevfn); + real_mode_switch_call_vga(busdevfn); + } else + printk_debug + ("Failed to copy VGA BIOS to 0xc0000\n"); + } else + printk_debug("BAD SIGNATURE 0x%x 0x%x\n", buf[0], buf[1]); + + printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__); + + pci_write_config32(dev, PCI_ROM_ADDRESS, 0); +} + + +// we had hoped to avoid this. +// this is a stub IDT only. It's main purpose is to ignore calls +// to the BIOS. +// no longer. Dammit. We have to respond to these. +struct realidt { + unsigned short offset, cs; +}; + +// from a handy writeup that andrey found. + +// handler. +// There are some assumptions we can make here. +// First, the Top Of Stack (TOS) is located on the top of page zero. +// we can share this stack between real and protected mode. +// that simplifies a lot of things ... +// we'll just push all the registers on the stack as longwords, +// and pop to protected mode. +// second, since this only ever runs as part of coreboot, +// we know all the segment register values -- so we don't save any. +// keep the handler that calls things small. It can do a call to +// more complex code in coreboot itself. This helps a lot as we don't +// have to do address fixup in this little stub, and calls are absolute +// so the handler is relocatable. +void handler(void) +{ + __asm__ __volatile__(" .code16 \n" + "idthandle: \n" + " pushal \n" + " movb $0, %al \n" + " ljmp $0, $callbiosint16\n" + "end_idthandle: \n" + " .code32 \n"); +} + +void debughandler(void) +{ + __asm__ __volatile__(" .code16 \n" + "debughandle: \n" + " pushw %cx \n" + " movw $250, %cx \n" + "dbh1: \n" + " loop dbh1 \n" + " popw %cx \n" + " iret \n" + "end_debughandle: \n" + ".code32 \n"); +} + +// Calling conventions. The first C function is called with this stuff +// on the stack. They look like value parameters, but note that if you +// modify them they will go back to the INTx function modified. +// the C function will call the biosint function with these as +// REFERENCE parameters. In this way, we can easily get +// returns back to the INTx caller (i.e. vgabios) +void callbiosint(void) +{ + __asm__ __volatile__(" .code16 \n" + "callbiosint16: \n" + " push %ds \n" + " push %es \n" + " push %fs \n" " push %gs \n" + // clean up the int #. To save space we put it in the lower + // byte. But the top 24 bits are junk. + " andl $0xff, %eax\n" + // this push does two things: + // - put the INT # on the stack as a parameter + // - provides us with a temp for the %cr0 mods. + " pushl %eax \n" " movl %cr0, %eax\n" " orl $0x00000001, %eax\n" /* PE = 1 */ + " movl %eax, %cr0\n" + /* Now that we are in protected mode jump to a 32 bit code segment. */ + " data32 ljmp $0x10, $biosprotect\n" + "biosprotect: \n" + " .code32 \n" + " movw $0x18, %ax \n" + " mov %ax, %ds \n" + " mov %ax, %es \n" + " mov %ax, %fs \n" + " mov %ax, %gs \n" + " mov %ax, %ss \n" + " lidt idtarg \n" + " call biosint \n" + // back to real mode ... + " ljmp $0x28, $__rms_16bit2\n" + "__rms_16bit2: \n" + " .code16 \n" + /* 16 bit code from here on... */ + /* Load the segment registers w/ properly configured segment + * descriptors. They will retain these configurations (limits, + * writability, etc.) once protected mode is turned off. */ + " mov $0x30, %ax \n" + " mov %ax, %ds \n" + " mov %ax, %es \n" + " mov %ax, %fs \n" + " mov %ax, %gs \n" + " mov %ax, %ss \n" + /* Turn off protection (bit 0 in CR0) */ + " movl %cr0, %eax \n" + " andl $0xFFFFFFFE, %eax \n" + " movl %eax, %cr0 \n" + /* Now really going into real mode */ + " ljmp $0, $__rms_real2 \n" + "__rms_real2: \n" + /* Setup a stack + * FixME: where is esp? */ + " mov $0x0, %ax \n" + " mov %ax, %ss \n" + /* ebugging for RGM */ + " mov $0x11, %al \n" + " outb %al, $0x80 \n" + /* Load our 16 it idt */ + " xor %ax, %ax \n" + " mov %ax, %ds \n" + " lidt __myidt \n" + /* Dump zeros in the other segregs */ + " mov %ax, %es \n" + " mov %ax, %fs \n" + " mov %ax, %gs \n" + " mov $0x40, %ax \n" + " mov %ax, %ds \n" + /* pop the INT # that you pushed earlier */ + " popl %eax \n" + " pop %gs \n" + " pop %fs \n" + " pop %es \n" + " pop %ds \n" + " popal \n" + " iret \n" + " .code32 \n"); +} + +enum { + PCIBIOS = 0x1a, + MEMSIZE = 0x12 +}; + +int pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp, + unsigned long *pesp, unsigned long *pebx, unsigned long *pedx, + unsigned long *pecx, unsigned long *peax, + unsigned long *pflags); + +int handleint21(unsigned long *pedi, unsigned long *pesi, + unsigned long *pebp, unsigned long *pesp, + unsigned long *pebx, unsigned long *pedx, + unsigned long *pecx, unsigned long *peax, + unsigned long *pflags); + +extern void vga_exit(void); + +int biosint(unsigned long intnumber, + unsigned long gsfs, unsigned long dses, + unsigned long edi, unsigned long esi, + unsigned long ebp, unsigned long esp, + unsigned long ebx, unsigned long edx, + unsigned long ecx, unsigned long eax, + unsigned long cs_ip, unsigned short stackflags) +{ + unsigned long ip; + unsigned long cs; + unsigned long flags; + int ret = -1; + + ip = cs_ip & 0xffff; + cs = cs_ip >> 16; + flags = stackflags; + + printk_debug("biosint: INT# 0x%lx\n", intnumber); + printk_debug("biosint: eax 0x%lx ebx 0x%lx ecx 0x%lx edx 0x%lx\n", + eax, ebx, ecx, edx); + printk_debug("biosint: ebp 0x%lx esp 0x%lx edi 0x%lx esi 0x%lx\n", + ebp, esp, edi, esi); + printk_debug("biosint: ip 0x%x cs 0x%x flags 0x%x\n", + ip, cs, flags); + + // cases in a good compiler are just as good as your own tables. + switch (intnumber) { + case 0...15: + // These are not BIOS service, but the CPU-generated exceptions + printk_info("biosint: Oops, exception %u\n", intnumber); + if (esp < 0x1000) { + printk_debug("Stack contents: "); + while (esp < 0x1000) { + printk_debug("0x%04x ", + *(unsigned short *) esp); + esp += 2; + } + printk_debug("\n"); + } + printk_debug("biosint: Bailing out\n"); + // "longjmp" + if ((acpi_sleep_type == 3) || (PAYLOAD_IS_SEABIOS == 0)) // add this to keep same with kevin's seabios patch in 2008-9-8 + vga_exit(); + break; + + case PCIBIOS: + ret = pcibios(&edi, &esi, &ebp, &esp, + &ebx, &edx, &ecx, &eax, &flags); + break; + case MEMSIZE: + // who cares. + eax = 64 * 1024; + ret = 0; + break; + case 0x15: + ret = handleint21(&edi, &esi, &ebp, &esp, + &ebx, &edx, &ecx, &eax, &flags); + break; + default: + printk_info("BIOSINT: Unsupport int #0x%x\n", intnumber); + break; + } + if (ret) + flags |= 1; // carry flags + else + flags &= ~1; + stackflags = flags; + return ret; +} + + +void setup_realmode_idt(void) +{ + extern unsigned char idthandle, end_idthandle; + extern unsigned char debughandle, end_debughandle; + + int i; + struct realidt *idts = (struct realidt *) 0; + int codesize = &end_idthandle - &idthandle; + unsigned char *intbyte, *codeptr; + + // for each int, we create a customized little handler + // that just pushes %ax, puts the int # in %al, + // then calls the common interrupt handler. + // this necessitated because intel didn't know much about + // architecture when they did the 8086 (it shows) + // (hmm do they know anymore even now :-) + // obviously you can see I don't really care about memory + // efficiency. If I did I would probe back through the stack + // and get it that way. But that's really disgusting. + for (i = 0; i < 256; i++) { + idts[i].cs = 0; + codeptr = (char *) 4096 + i * codesize; + idts[i].offset = (unsigned) codeptr; + memcpy(codeptr, &idthandle, codesize); + intbyte = codeptr + 3; + *intbyte = i; + } + + // fixed entry points + + // VGA BIOSes tend to hardcode f000:f065 as the previous handler of + // int10. + // calling convention here is the same as INTs, we can reuse + // the int entry code. + codeptr = (char *) 0xff065; + memcpy(codeptr, &idthandle, codesize); + intbyte = codeptr + 3; + *intbyte = 0x42; /* int42 is the relocated int10 */ +/* + Fixed entry points + VBIOS will call f000:f859 instead of sending int15. + calling convertion here is the same as INTs, we can reuse the int entry code. +*/ + codeptr = (char *) 0xff859; + memcpy(codeptr, &idthandle, codesize); + intbyte = codeptr + 3; + *intbyte = 0x15; + + /* debug handler - useful to set a programmable delay between instructions if the + TF bit is set upon call to real mode */ + idts[1].cs = 0; + idts[1].offset = 16384; + memcpy(16384, &debughandle, &end_debughandle - &debughandle); + + +} + + + +enum { + CHECK = 0xb001, + FINDDEV = 0xb102, + READCONFBYTE = 0xb108, + READCONFWORD = 0xb109, + READCONFDWORD = 0xb10a, + WRITECONFBYTE = 0xb10b, + WRITECONFWORD = 0xb10c, + WRITECONFDWORD = 0xb10d +}; + +// errors go in AH. Just set these up so that word assigns +// will work. KISS. +enum { + PCIBIOS_NODEV = 0x8600, + PCIBIOS_BADREG = 0x8700 +}; + +int +pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp, + unsigned long *pesp, unsigned long *pebx, unsigned long *pedx, + unsigned long *pecx, unsigned long *peax, unsigned long *pflags) +{ + unsigned long edi = *pedi; + unsigned long esi = *pesi; + unsigned long ebp = *pebp; + unsigned long esp = *pesp; + unsigned long ebx = *pebx; + unsigned long edx = *pedx; + unsigned long ecx = *pecx; + unsigned long eax = *peax; + unsigned long flags = *pflags; + unsigned short func = (unsigned short) eax; + int retval = 0; + unsigned short devid, vendorid, devfn; + short devindex; /* Use short to get rid of garbage in upper half of 32-bit register */ + unsigned char bus; + device_t dev; + + switch (func) { + case CHECK: + *pedx = 0x4350; + *pecx = 0x2049; + retval = 0; + break; + case FINDDEV: + { + devid = *pecx; + vendorid = *pedx; + devindex = *pesi; + dev = 0; + while ((dev = + dev_find_device(vendorid, devid, dev))) { + if (devindex <= 0) + break; + devindex--; + } + if (dev) { + unsigned short busdevfn; + *peax = 0; + // busnum is an unsigned char; + // devfn is an int, so we mask it off. + busdevfn = (dev->bus->secondary << 8) + | (dev->path.pci.devfn & 0xff); + printk_debug("0x%x: return 0x%x\n", func, + busdevfn); + *pebx = busdevfn; + retval = 0; + } else { + *peax = PCIBIOS_NODEV; + retval = -1; + } + } + break; + case READCONFDWORD: + case READCONFWORD: + case READCONFBYTE: + case WRITECONFDWORD: + case WRITECONFWORD: + case WRITECONFBYTE: + { + unsigned long dword; + unsigned short word; + unsigned char byte; + unsigned char reg; + + devfn = *pebx & 0xff; + bus = *pebx >> 8; + reg = *pedi; + dev = dev_find_slot(bus, devfn); + if (!dev) { + printk_debug + ("0x%x: BAD DEVICE bus %d devfn 0x%x\n", + func, bus, devfn); + // idiots. the pcibios guys assumed you'd never pass a bad bus/devfn! + *peax = PCIBIOS_BADREG; + retval = -1; + } + switch (func) { + case READCONFBYTE: + byte = pci_read_config8(dev, reg); + *pecx = byte; + break; + case READCONFWORD: + word = pci_read_config16(dev, reg); + *pecx = word; + break; + case READCONFDWORD: + dword = pci_read_config32(dev, reg); + *pecx = dword; + break; + case WRITECONFBYTE: + byte = *pecx; + pci_write_config8(dev, reg, byte); + break; + case WRITECONFWORD: + word = *pecx; + pci_write_config16(dev, reg, word); + break; + case WRITECONFDWORD: + dword = *pecx; + pci_write_config32(dev, reg, dword); + break; + } + + if (retval) + retval = PCIBIOS_BADREG; + printk_debug + ("0x%x: bus %d devfn 0x%x reg 0x%x val 0x%lx\n", + func, bus, devfn, reg, *pecx); + *peax = 0; + retval = 0; + } + break; + default: + printk_err("UNSUPPORTED PCIBIOS FUNCTION 0x%x\n", func); + break; + } + + return retval; +} + + +/* return value of int0x15(int21) +AH AL Completion status +?? 5Fh Function call supported +?? !=5Fh Function not supported +00 5Fh Function call successful +01 5Fh Function call failed +*/ +int handleint21(unsigned long *edi, unsigned long *esi, unsigned long *ebp, + unsigned long *esp, unsigned long *ebx, unsigned long *edx, + unsigned long *ecx, unsigned long *eax, + unsigned long *flags) +{ + int res = -1; + switch (*eax & 0xffff) { + case 0x5f19: + *eax = 0x5f; + *ecx = 0x3; + res = 0; + break; + case 0x5f18: + { + /* + BL + Bit[7:4] + Memory Data Rate + 0000: 66MHz + 0001: 100MHz + 0010: 133MHz + 0011: 200MHz ( DDR200 ) + 0100: 266MHz ( DDR266 ) + 0101: 333MHz ( DDR333 ) + 0110: 400MHz ( DDR400 ) + 0111: 533MHz ( DDR I/II 533 + 1000: 667MHz ( DDR I/II 667) + Bit[3:0] + N: Frame Buffer Size 2^N MB + */ + u8 i; + device_t dev; + dev = dev_find_slot(0, PCI_DEVFN(0, 3)); + i = pci_read_config8(dev, 0xa1); + i = (i & 0x70); + i = i >> 4; + if (i == 0) { + *eax = 0x00; //not support 5f18 + break; + } + i = i + 2; + *ebx = (u32) i; + i = pci_read_config8(dev, 0x90); + i = (i & 0x07); + i = i + 3; + i = i << 4; + *ebx = (*ebx) + ((u32) i); + *eax = 0x5f; + res = 0; + break; + } + case 0x5f00: + *eax = 0x005f; + res = 0; + break; + case 0x5f01: + *eax = 0x5f; + *ecx = (*ecx & 0xffffff00) | 2; // panel type = 2 = 1024 * 768 + res = 0; + break; + case 0x5f02: + *eax = 0x5f; + *ebx = (*ebx & 0xffff0000) | 2; + *ecx = (*ecx & 0xffff0000) | 0x401; // PAL + crt only + *edx = (*edx & 0xffff0000) | 0; // TV Layout - default + res = 0; + break; + case 0x5f0f: + *eax = 0x005f; + res = 0; + break; + default: + *eax = 0; + break; + } + return res; +}
Added: trunk/coreboot-v2/src/northbridge/via/vx800/vgachip.h =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/vgachip.h (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/vgachip.h 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,34 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Corey Osgood corey.osgood@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _PC80_VGABIOS +#define _PC80_VGABIOS + +extern struct chip_control pc80_vgabios_control; + +struct pc80_vgabios_config { + int nothing; +}; + +void vga_enable_console(void); +void do_vgabios(void); +void setup_realmode_idt(void); +void write_protect_vgabios(void); + +#endif /* _PC80_VGABIOS */
Added: trunk/coreboot-v2/src/northbridge/via/vx800/vx800.h =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/vx800.h (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/vx800.h 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,125 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef VX800_H +#define VX800_H 1 + + +#ifndef __ROMCC__ +static void vx800_noop(){} +#endif +#define REV_B0 0x10 +#define REV_B1 0x11 +#define REV_B2 0x12 +#define REV_B3 0x13 +#define REV_B4 0x14 +#define REV_B2 0xB4 +#define REV_B0 0x00 +#define REV_B2 0x01 + +/* VGA stuff */ +#define SR_INDEX 0x3c4 +#define SR_DATA 0x3c5 +#define CRTM_INDEX 0x3b4 +#define CRTM_DATA 0x3b5 +#define CRTC_INDEX 0x3d4 +#define CRTC_DATA 0x3d5 + +/* Memory Controller Registers */ +#define RANK0_END 0x40 +#define RANK1_END 0x41 +#define RANK2_END 0x42 +#define RANK3_END 0x43 +#define RANK0_START 0x48 +#define RANK1_START 0x49 +#define RANK2_START 0x4a +#define RANK3_START 0x4b +#define DDR_PAGE_CTL 0x69 +#define DRAM_REFRESH_COUNTER 0x6a +#define DRAM_MISC_CTL 0x6b +#define CH_A_DQS_OUTPUT_DELAY 0x70 +#define CH_A_MD_OUTPUT_DELAY 0x71 + +/* RAM Init Commands */ +#define RAM_COMMAND_NORMAL 0x0 +#define RAM_COMMAND_NOP 0x1 +#define RAM_COMMAND_PRECHARGE 0x2 +#define RAM_COMMAND_MRS 0x3 +#define RAM_COMMAND_CBR 0x4 + + + + +/* IDE specific bits */ +#define IDE_MODE_REG 0x09 +#define IDE0_NATIVE_MODE (1 << 0) +#define IDE1_NATIVE_MODE (1 << 2) + +/* These are default addresses according to Via */ +#define IDE0_DATA_ADDR 0x1f0 +#define IDE0_CONTROL_ADDR 0x3f4 +#define IDE1_DATA_ADDR 0x170 +#define IDE1_CONTROL_ADDR 0x370 + + +/* By Award default, Via default is 0xCC0 */ +#define BUS_MASTER_ADDR 0xfe00 + +#define CHANNEL_ENABLE_REG 0x40 +#define ENABLE_IDE0 (1 << 0) +#define ENABLE_IDE1 (1 << 1) + + + +#define VX800_ACPI_IO_BASE 0x0400 + + +#define NB_APIC_REG 0,0,5, +#define NB_PXPTRF_REG NB_APIC_REG +#define NB_MSGC_REG NB_APIC_REG +#define NB_HOST_REG 0,0,2, +#define NB_P6IF_REG NB_HOST_REG + +#define NB_DRAMC_REG 0,0,3, +#define NB_PMU_REG 0,0,4, +#define NB_VLINK_REG 0,0,7, +#define NB_PEG_BRIDGE_REG 0,2, 0, +#define NB_D3F0_REG 0,3, 0, +#define NB_D3F1_REG 0,3, 1, + + +#define SB_LPC_REG 0,0x11,0, +#define SB_VLINK_REG 0,0x11,7, +#define SB_SATA_REG 0,0xf, 0, +#define SB_IDEC_REG 0,0xf, 0, +#define SB_P2PB_REG 0,0x13, 0, +#define SB_USB0_REG 0,0x10, 0, +#define SB_USB1_REG 0,0x10, 1, +#define SB_USB2_REG 0,0x10, 2, +#define SB_EHCI_REG 0,0x10, 4, + + +#define VX800SB_APIC_ID 0x4 +#define VX800SB_APIC_BASE 0xfec00000ULL +#define VX800SB_APIC_DATA_OFFSET 0x10 +#define VX800SB_APIC_ENTRY_NUMBER 0x40 + +#define VX800_D0F5_MMCONFIG_MBAR 0x61 + +#endif
Added: trunk/coreboot-v2/src/northbridge/via/vx800/vx800_early_serial.c =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/vx800_early_serial.c (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/vx800_early_serial.c 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,110 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +/* + * Enable the serial devices on the VIA + */ +#include <arch/romcc_io.h> + +/* The base address is 0x15c, 0x2e, depending on config bytes */ + +#define SIO_BASE 0x3f0 +#define SIO_DATA SIO_BASE+1 + +static void vx800_writesuper(uint8_t reg, uint8_t val) +{ + outb(reg, SIO_BASE); + outb(val, SIO_DATA); +} + +static void vx800_writepnpaddr(uint8_t val) +{ + outb(val, 0x2e); + outb(val, 0xeb); +} + +static void vx800_writepnpdata(uint8_t val) +{ + outb(val, 0x2f); + outb(val, 0xeb); +} + +static void vx800_writesiobyte(uint16_t reg, uint8_t val) +{ + outb(val, reg); +} + +static void vx800_writesioword(uint16_t reg, uint16_t val) +{ + outw(val, reg); +} + + +/* regs we use: 85, and the southbridge devfn is defined by the + mainboard + */ + +static void enable_vx800_serial(void) +{ + outb(6, 0x80); + outb(0x03, 0x22); + + + //pci_write_config8(PCI_DEV(0,17,0),0xb4,0x7e); + //pci_write_config8(PCI_DEV(0,17,0),0xb0,0x10); + + // turn on pnp + vx800_writepnpaddr(0x87); + vx800_writepnpaddr(0x87); + // now go ahead and set up com1. + // set address + vx800_writepnpaddr(0x7); + vx800_writepnpdata(0x2); + // enable serial out + vx800_writepnpaddr(0x30); + vx800_writepnpdata(0x1); + // serial port 1 base address (FEh) + vx800_writepnpaddr(0x60); + vx800_writepnpdata(0xfe); + // serial port 1 IRQ (04h) + vx800_writepnpaddr(0x70); + vx800_writepnpdata(0x4); + // serial port 1 control + vx800_writepnpaddr(0xf0); + vx800_writepnpdata(0x2); + // turn of pnp + vx800_writepnpaddr(0xaa); + + // set up reg to set baud rate. + vx800_writesiobyte(0x3fb, 0x80); + // Set 115 kb + vx800_writesioword(0x3f8, 1); + // Set 9.6 kb + // WRITESIOWORD(0x3f8, 12) + // now set no parity, one stop, 8 bits + vx800_writesiobyte(0x3fb, 3); + // now turn on RTS, DRT + vx800_writesiobyte(0x3fc, 3); + // Enable interrupts + vx800_writesiobyte(0x3f9, 0xf); + // should be done. Dump a char for fun. + vx800_writesiobyte(0x3f8, 48); + outb(7, 0x80); +} +
Added: trunk/coreboot-v2/src/northbridge/via/vx800/vx800_early_smbus.c =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/vx800_early_smbus.c (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/vx800_early_smbus.c 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,321 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + #include <device/pci_ids.h> + #include "vx800.h" +#define SMBUS_IO_BASE 0x0500 //from award bios +#define PMIO_BASE VX800_ACPI_IO_BASE //might as well set this while we're here + +#define SMBHSTSTAT SMBUS_IO_BASE + 0x0 +#define SMBSLVSTAT SMBUS_IO_BASE + 0x1 +#define SMBHSTCTL SMBUS_IO_BASE + 0x2 +#define SMBHSTCMD SMBUS_IO_BASE + 0x3 +#define SMBXMITADD SMBUS_IO_BASE + 0x4 +#define SMBHSTDAT0 SMBUS_IO_BASE + 0x5 +#define SMBHSTDAT1 SMBUS_IO_BASE + 0x6 +/* Rest of these aren't currently used... */ +#define SMBBLKDAT SMBUS_IO_BASE + 0x7 +#define SMBSLVCTL SMBUS_IO_BASE + 0x8 +#define SMBTRNSADD SMBUS_IO_BASE + 0x9 +#define SMBSLVDATA SMBUS_IO_BASE + 0xa +#define SMLINK_PIN_CTL SMBUS_IO_BASE + 0xe +#define SMBUS_PIN_CTL SMBUS_IO_BASE + 0xf + +/* Define register settings */ +#define HOST_RESET 0xff +#define DIMM_BASE 0xa0 // 1010000 is base for DIMM in SMBus +#define READ_CMD 0x01 // 1 in the 0 bit of SMBHSTADD states to READ + +#define SMBUS_TIMEOUT (100*1000*10) + +#define I2C_TRANS_CMD 0x40 +#define CLOCK_SLAVE_ADDRESS 0x69 + +#define SMBUS_DELAY() outb(0x80, 0x80) + +/* Debugging macros. Only necessary if something isn't working right */ + +#define DEBUG_SMBUS 1 + +#ifdef DEBUG_SMBUS +#define PRINT_DEBUG(x) print_debug(x) +#define PRINT_DEBUG_HEX16(x) print_debug_hex16(x) +#else +#define PRINT_DEBUG(x) +#define PRINT_DEBUG_HEX16(x) +#endif + +/* Internal functions */ +static void smbus_print_error(unsigned char host_status_register, int loops) +{ +// print_err("some i2c error\r\n"); + /* Check if there actually was an error */ + if ( host_status_register == 0x00 || host_status_register == 0x40 || + host_status_register == 0x42) return; + print_err("smbus_error: "); + print_err_hex8(host_status_register); + print_err("\r\n"); + if (loops >= SMBUS_TIMEOUT) { + print_err("SMBus Timout\r\n"); + } + if (host_status_register & (1 << 4)) { + print_err("Interrup/SMI# was Failed Bus Transaction\r\n"); + } + if (host_status_register & (1 << 3)) { + print_err("Bus Error\r\n"); + } + if (host_status_register & (1 << 2)) { + print_err("Device Error\r\n"); + } + if (host_status_register & (1 << 1)) { + /* This isn't a real error... */ + print_debug("Interrupt/SMI# was Successful Completion\r\n"); + } + if (host_status_register & (1 << 0)) { + print_err("Host Busy\r\n"); + } +} + +static void smbus_wait_until_ready(void) +{ + int loops; + + loops = 0; + /* Yes, this is a mess, but it's the easiest way to do it */ + while(((inb(SMBHSTSTAT) & 1) == 1) && (loops <= SMBUS_TIMEOUT)) { + SMBUS_DELAY(); + ++loops; + } + smbus_print_error(inb(SMBHSTSTAT), loops); +} + +static void smbus_reset(void) +{ + outb(HOST_RESET, SMBHSTSTAT); +} + +/* Public functions */ +static unsigned int set_ics_data(unsigned char dev, int data, char len) +{ + int i; + smbus_reset(); + /* clear host data port */ + outb(0x00, SMBHSTDAT0); + SMBUS_DELAY(); + smbus_wait_until_ready(); + + /* read to reset block transfer counter */ + inb(SMBHSTCTL); + + /* fill blocktransfer array */ + if (dev=0xd2) { + //char d2_data[] = {0x0d,0x00,0x3f,0xcd,0x7f,0xbf,0x1a,0x2a,0x01,0x0f,0x0b,0x00,0x8d,0x9b}; + outb(0x0d,SMBBLKDAT); + outb(0x00,SMBBLKDAT); + outb(0x3f,SMBBLKDAT); + outb(0xcd,SMBBLKDAT); + outb(0x7f,SMBBLKDAT); + outb(0xbf,SMBBLKDAT); + outb(0x1a,SMBBLKDAT); + outb(0x2a,SMBBLKDAT); + outb(0x01,SMBBLKDAT); + outb(0x0f,SMBBLKDAT); + outb(0x0b,SMBBLKDAT); + outb(0x80,SMBBLKDAT); + outb(0x8d,SMBBLKDAT); + outb(0x9b,SMBBLKDAT); + } else { + //char d4_data[] = {0x08,0xff,0x3f,0x00,0x00,0xff,0xff,0xff,0xff}; + outb(0x08,SMBBLKDAT); + outb(0xff,SMBBLKDAT); + outb(0x3f,SMBBLKDAT); + outb(0x00,SMBBLKDAT); + outb(0x00,SMBBLKDAT); + outb(0xff,SMBBLKDAT); + outb(0xff,SMBBLKDAT); + outb(0xff,SMBBLKDAT); + outb(0xff,SMBBLKDAT); + } + + //for (i=0; i < len; i++) + // outb(data[i],SMBBLKDAT); + + outb(dev, SMBXMITADD); + outb(0, SMBHSTCMD); + outb(len, SMBHSTDAT0); + outb(0x74, SMBHSTCTL); + + SMBUS_DELAY(); + + smbus_wait_until_ready(); + + smbus_reset(); + return 0; +} + +static unsigned int get_spd_data(unsigned int dimm, unsigned int offset) +{ + unsigned int val; + + smbus_reset(); + /* clear host data port */ + outb(0x00, SMBHSTDAT0); + SMBUS_DELAY(); + smbus_wait_until_ready(); + + /* Do some mathmatic magic */ + dimm = (dimm << 1); + dimm &= 0x0E; + dimm |= 0xA0; + + outb(dimm|0x1, SMBXMITADD); + outb(offset, SMBHSTCMD); + outb(0x48, SMBHSTCTL); + + SMBUS_DELAY(); + + smbus_wait_until_ready(); + + val = inb(SMBHSTDAT0); + smbus_reset(); + return val; +} + +static void enable_smbus(void) +{ + device_t dev; + + dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX855_LPC), 0); + + if (dev == PCI_DEV_INVALID) { + /* This won't display text if enable_smbus() is before serial init */ + die("Power Managment Controller not found\r\n"); + } + + /* Set clock source */ + pci_write_config8(dev, 0x94, 0x20); + + /* Write SMBus IO base to 0xd0, and enable SMBus */ + pci_write_config16(dev, 0xd0, SMBUS_IO_BASE | 1); + + /* Set to Award value */ + pci_write_config8(dev, 0xd2, 0x05); + + /* Make it work for I/O ...*/ + pci_write_config16(dev, 0x04, 0x0003); + + /* + coreboot hangs at this two lines after os reboot(this even happen after I change os + reboot to cold reboot, this also interfere S3 wakeup)*/ + /* Setup clock chips */ + //set_ics_data(0xd2, 0, 14); + //set_ics_data(0xd4, 0, 9); + + smbus_reset(); + /* clear host data port */ + outb(0x00, SMBHSTDAT0); + SMBUS_DELAY(); + smbus_wait_until_ready(); +} + +/** + * A fixup for some systems that need time for the SMBus to "warm up". This is + * needed on some VT823x based systems, where the SMBus spurts out bad data for + * a short time after power on. This has been seen on the VIA Epia series and + * Jetway J7F2-series. It reads the ID byte from SMBus, looking for + * known-good data from a slot/address. Exits on either good data or a timeout. + * + * TODO: This should probably go into some global file, but one would need to + * be created just for it. If some other chip needs/wants it, we can + * worry about it then. + * + * @param ctrl The memory controller and SMBus addresses. + */ +void smbus_fixup(const struct mem_controller *ctrl) +{ + int i, ram_slots, current_slot = 0; + u8 result = 0; + + ram_slots = ARRAY_SIZE(ctrl->channel0); + if (!ram_slots) { + print_err("smbus_fixup() thinks there are no RAM slots!\r\n"); + return; + } + + PRINT_DEBUG("Waiting for SMBus to warm up"); + + /* + * Bad SPD data should be either 0 or 0xff, but YMMV. So we look for + * the ID bytes of SDRAM, DDR, DDR2, and DDR3 (and anything in between). + * VT8237R has only been seen on DDR and DDR2 based systems, so far. + */ + for (i = 0; (i < SMBUS_TIMEOUT && ((result < SPD_MEMORY_TYPE_SDRAM) || + (result > SPD_MEMORY_TYPE_SDRAM_DDR3))); i++) { + + if (current_slot > ram_slots) + current_slot = 0; + + result = get_spd_data(ctrl->channel0[current_slot], + SPD_MEMORY_TYPE); + current_slot++; + PRINT_DEBUG("."); + } + + if (i >= SMBUS_TIMEOUT) + print_err("SMBus timed out while warming up\r\n"); + else + PRINT_DEBUG("Done\r\n"); +} + +/* Debugging Function */ +#ifdef DEBUG_SMBUS +static void dump_spd_data(void) +{ + int dimm, offset, regs; + unsigned int val; + + for(dimm = 0; dimm < 8; dimm++) + { + print_debug("SPD Data for DIMM "); + print_debug_hex8(dimm); + print_debug("\r\n"); + + val = get_spd_data(dimm, 0); + if(val == 0xff) + { + regs = 256; + } else if(val == 0x80) { + regs = 128; + } else { + print_debug("No DIMM present\r\n"); + regs = 0; + } + for(offset = 0; offset < regs; offset++) + { + print_debug(" Offset "); + print_debug_hex8(offset); + print_debug(" = 0x"); + print_debug_hex8(get_spd_data(dimm, offset)); + print_debug("\r\n"); + } + } +} +#else +#define dump_spd_data() +#endif
Added: trunk/coreboot-v2/src/northbridge/via/vx800/vx800_ide.c =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/vx800_ide.c (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/vx800_ide.c 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,204 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ops.h> +#include <device/pci_ids.h> +#include <console/console.h> +#include "chip.h" +#include <arch/io.h> +#include "vx800.h" + +static const idedevicepcitable[16 * 12] = { +// +/*0x02, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0xA8, 0xA8, 0xF0, 0x00, 0x00, 0xB6, +0x00, 0x00, 0x01, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x09, 0xC4, 0x06, 0x11, 0x09, 0xC4, +0x00, 0xC2, 0xF9, 0x01, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x02, 0x01, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +*/ +// + 0x02, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x99, 0x20, 0xf0, 0x00, 0x00, 0x20, + 0x00, 0x00, 0x17, 0xF1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x09, 0xC4, 0x06, 0x11, 0x09, 0xC4, + 0x00, 0xc2, 0x09, 0x01, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x02, 0x01, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +//legacybios xp pci value +/*0x02, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0xa8, 0x20, 0x00, 0x00, 0x00, 0xb6, +0x00, 0x00, 0x16, 0xF1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x09, 0xC4, 0x06, 0x11, 0x09, 0xC4, +0x00, 0x02, 0x09, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x34, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x02, 0x01, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +*/ +//rom legacybios on cn_8562b +/* +0x03, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x99, 0x20, 0x60, 0x00, 0x00, 0x20, +0x00, 0x00, 0x1E, 0xF1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x09, 0xC4, 0x06, 0x11, 0x09, 0xC4, +0x00, 0x02, 0x09, 0x01, 0x18, 0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x34, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x02, 0x01, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +*/ +//from egacybios on c7_8562b +/*0x03, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x20, 0x60, 0x00, 0x00, 0xB6, +0x00, 0x00, 0x1E, 0xF1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x09, 0xC4, 0x06, 0x11, 0x09, 0xC4, +0x00, 0x02, 0x09, 0x01, 0x18, 0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x34, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x02, 0x01, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, */ +}; + +static void ide_init(struct device *dev) +{ + uint8_t enables, Rx89, RxC0; + u8 i, data; + struct ATA_REG_INIT_TABLE *pEntry; + printk_info("ide_init\n"); + +#if 1 + /*these 3 lines help to keep interl back door for DID VID SUBID untouched */ + u16 data16_1, data16_2; + data16_1 = pci_read_config16(dev, 0xba); + data16_2 = pci_read_config16(dev, 0xbe); + + for (i = 0; i < (16 * 12); i++) { + pci_write_config8(dev, 0x40 + i, idedevicepcitable[i]); + } + //pci_write_config8(dev, 0x0d, 0x20); + data = pci_read_config8(dev, 0x0d); + data &= 0x0f; + data |= 0x40; + pci_write_config8(dev, 0x0d, data); + + //these 2 lines help to keep interl back door for DID VID SUBID untouched + pci_write_config16(dev, 0xba, data16_1); + pci_write_config16(dev, 0xbe, data16_2); +#endif + /* Force interrupts to use compat mode. */ + pci_write_config8(dev, PCI_INTERRUPT_PIN, 0x0); + pci_write_config8(dev, PCI_INTERRUPT_LINE, 0xff); +#if 0 + + + + struct southbridge_via_vt8237r_config *sb = + (struct southbridge_via_vt8237r_config *) dev->chip_info; + + u8 enables; + u32 cablesel; + + pci_write_config16(dev, 0x04, 0x0007); + + enables = pci_read_config8(dev, IDE_CS) & ~0x3; + enables |= 0x02; + pci_write_config8(dev, IDE_CS, enables); + enables = pci_read_config8(dev, IDE_CS); + printk_debug("Enables in reg 0x40 read back as 0x%x\n", enables); + + /* Enable only compatibility mode. */ + enables = pci_read_config8(dev, IDE_CONF_II); + enables &= ~0xc0; + pci_write_config8(dev, IDE_CONF_II, enables); + enables = pci_read_config8(dev, IDE_CONF_II); + printk_debug("Enables in reg 0x42 read back as 0x%x\n", enables); + + /* Enable prefetch buffers. */ + enables = pci_read_config8(dev, IDE_CONF_I); + enables |= 0xf0; + pci_write_config8(dev, IDE_CONF_I, enables); + + /* Flush FIFOs at half. */ + enables = pci_read_config8(dev, IDE_CONF_FIFO); + enables &= 0xf0; + enables |= (1 << 2) | (1 << 0); + pci_write_config8(dev, IDE_CONF_FIFO, enables); + + /* PIO read prefetch counter, Bus Master IDE Status Reg. Read Retry. */ + enables = pci_read_config8(dev, IDE_MISC_I); + enables &= 0xe2; + enables |= (1 << 4) | (1 << 3); + pci_write_config8(dev, IDE_MISC_I, enables); + + /* Use memory read multiple, Memory-Write-and-Invalidate. */ + enables = pci_read_config8(dev, IDE_MISC_II); + enables |= (1 << 2) | (1 << 3); + pci_write_config8(dev, IDE_MISC_II, enables); + + /* Force interrupts to use compat mode. */ + pci_write_config8(dev, PCI_INTERRUPT_PIN, 0x0); + pci_write_config8(dev, PCI_INTERRUPT_LINE, 0xff); + + /* Cable guy... */ + cablesel = pci_read_config32(dev, IDE_UDMA); + cablesel &= ~((1 << 28) | (1 << 20) | (1 << 12) | (1 << 4)); + cablesel |= (sb->ide0_80pin_cable << 28) | + (sb->ide0_80pin_cable << 20) | + (sb->ide1_80pin_cable << 12) | (sb->ide1_80pin_cable << 4); + pci_write_config32(dev, IDE_UDMA, cablesel); +#endif +} + +static struct device_operations ide_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = ide_init, + .enable = 0, + .ops_pci = 0, +}; + +static struct pci_driver via_ide_driver __pci_driver = { + .ops = &ide_ops, + .vendor = PCI_VENDOR_ID_VIA, + .device = PCI_DEVICE_ID_VIA_VX855_IDE, +};
Added: trunk/coreboot-v2/src/northbridge/via/vx800/vx800_lpc.c =================================================================== --- trunk/coreboot-v2/src/northbridge/via/vx800/vx800_lpc.c (rev 0) +++ trunk/coreboot-v2/src/northbridge/via/vx800/vx800_lpc.c 2009-05-27 13:12:42 UTC (rev 4313) @@ -0,0 +1,384 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ops.h> +#include <device/pci_ids.h> + +#include <pc80/mc146818rtc.h> +#include <pc80/keyboard.h> +#include <pc80/i8259.h> +#include "vx800.h" +#include "chip.h" + +static const unsigned char pciIrqs[4] = {0xa, 0x9, 0xb, 0xa}; + +static const unsigned char vgaPins[4] = { 'A', 'B', 'C', 'D' };//only INTA + +static const unsigned char slotPins[4] = { 'A', 'A', 'A', 'A'};//all 4 + +static const unsigned char usbdevicePins[4] = { 'A', 'B', 'C', 'D' };//only INTA +static const unsigned char sdioPins[4] = { 'A', 'B', 'C', 'D' };//only INTA +static const unsigned char sd_ms_ctrl_Pins[4] = { 'B', 'C', 'D', 'A' };//only INTA +static const unsigned char ce_ata_nf_ctrl_Pins[4] = { 'C', 'C', 'D', 'A' };//only INTA +static const unsigned char idePins[4] = { 'B', 'C', 'D', 'A' };//only INTA + +static const unsigned char usbPins[4] = { 'A', 'B', 'C', 'D' };//all 4 + +static const unsigned char hdacaudioPins[4] = { 'B', 'C', 'D', 'A' };//only INTA + +static unsigned char *pin_to_irq(const unsigned char *pin) +{ + static unsigned char Irqs[4]; + int i; + for (i = 0 ; i < 4 ; i++) + Irqs[i] = pciIrqs[ pin[i] - 'A' ]; + + return Irqs; +} + +static void pci_routing_fixup(struct device *dev) +{ + printk_info("%s: dev is %p\n", __FUNCTION__, dev); + + /* set up PCI IRQ routing */ + pci_write_config8(dev, 0x55, pciIrqs[0] << 4); + pci_write_config8(dev, 0x56, pciIrqs[1] | (pciIrqs[2] << 4) ); + pci_write_config8(dev, 0x57, pciIrqs[3] << 4); + + /* VGA */ + printk_info("setting vga\n"); + pci_assign_irqs(0, 0x1, pin_to_irq(vgaPins)); + + /* PCI slot */ + printk_info("setting pci slot\n"); + pci_assign_irqs(0, 0x08, pin_to_irq(slotPins)); + + /* PCI slot */ + printk_info("setting USB Device Controller\n"); + pci_assign_irqs(0, 0x0b, pin_to_irq(usbdevicePins)); + + /* PCI slot */ + printk_info("setting SDIO Controller\n"); + pci_assign_irqs(0, 0x0c, pin_to_irq(sdioPins)); + + /* PCI slot */ + printk_info("setting SD $ MS Controller\n"); + pci_assign_irqs(0, 0x0d, pin_to_irq(sd_ms_ctrl_Pins)); + + /* PCI slot */ + printk_info("setting CE-ATA NF Controller(Card Boot)\n"); + pci_assign_irqs(0, 0x0e, pin_to_irq(ce_ata_nf_ctrl_Pins)); + + /* PCI slot */ + printk_info("setting ide\n"); + //pci_assign_irqs(0, 0x0f, pin_to_irq(idePins)); + + /* Standard usb components */ + printk_info("setting usb1-2\n"); +// pci_assign_irqs(0, 0x10, pin_to_irq(usbPins)); + + /* sound hardware */ + printk_info("setting hdac audio\n"); + pci_assign_irqs(0, 0x14, pin_to_irq(hdacaudioPins)); + + printk_spew("%s: DONE\n", __FUNCTION__); +} + +void setup_pm(device_t dev) +{ + u16 tmp; + /* Debounce LID and PWRBTN# Inputs for 16ms. */ + pci_write_config8(dev, 0x80, 0x20); + + /* Set ACPI base address to IO VX800_ACPI_IO_BASE */ + pci_write_config16(dev, 0x88, VX800_ACPI_IO_BASE|1); + + /* set ACPI irq to 9 */ + pci_write_config8(dev, 0x82, 0x49); + + /* Primary interupt channel, define wake events 0=IRQ0 15=IRQ15 1=en. */ +// pci_write_config16(dev, 0x84, 0x30f2); + pci_write_config16(dev, 0x84, 0x609a); // 0x609a?? + + /* SMI output level to low, 7.5us throttle clock */ + pci_write_config8(dev, 0x8d, 0x18); + + /* GP Timer Control 1s */ + pci_write_config8(dev, 0x93, 0x88); + + /* Power Well */ + pci_write_config8(dev, 0x94, 0x20); // 0x20?? + + /* 7 = stp to sust delay 1msec + * 6 = SUSST# Deasserted Before PWRGD for STD + */ + pci_write_config8(dev, 0x95, 0xc0); // 0xc1?? + + /* Disable GP2 & GP3 Timer */ + pci_write_config8(dev, 0x98, 0); + + /* GP2 Timer Counter */ + pci_write_config8(dev, 0x99, 0xfb); + /* GP3 Timer Counter */ + //pci_write_config8(dev, 0x9a, 0x20); + + /* Multi Function Select 1 */ + pci_write_config8(dev, 0xe4, 0x00); + /* Multi Function Select 2 */ + pci_write_config8(dev, 0xe5, 0x41); //?? + + + /* Enable ACPI access (and setup like award) */ + pci_write_config8(dev, 0x81, 0x84); + + /* Clear status events. */ + outw(0xffff, VX800_ACPI_IO_BASE + 0x00); + outw(0xffff, VX800_ACPI_IO_BASE + 0x20); + outw(0xffff, VX800_ACPI_IO_BASE + 0x28); + outl(0xffffffff, VX800_ACPI_IO_BASE + 0x30); + + /* Disable SCI on GPIO. */ + outw(0x0, VX800_ACPI_IO_BASE + 0x22); + + /* Disable SMI on GPIO. */ + outw(0x0, VX800_ACPI_IO_BASE + 0x24); + + /* Disable all global enable SMIs. */ + outw(0x0, VX800_ACPI_IO_BASE + 0x2a); + + /* All SMI off, both IDE buses ON, PSON rising edge. */ + outw(0x0, VX800_ACPI_IO_BASE + 0x2c); + + /* Primary activity SMI disable. */ + outl(0x0, VX800_ACPI_IO_BASE + 0x34); + + /* GP timer reload on none. */ + outl(0x0, VX800_ACPI_IO_BASE + 0x38); + + /* Disable extended IO traps. */ + outb(0x0, VX800_ACPI_IO_BASE + 0x42); + + tmp = inw(VX800_ACPI_IO_BASE + 0x04); + /* SCI is generated for RTC/pwrBtn/slpBtn. */ + tmp |= 1; + outw(tmp, VX800_ACPI_IO_BASE + 0x04); + + /* Allow SLP# signal to assert LDTSTOP_L. + * Will work for C3 and for FID/VID change. + */ + outb(0x1, VX800_ACPI_IO_BASE + 0x11); +/* + outw(0x0, 0x424); + outw(0x0, 0x42a); + outw(0x1, 0x42c); + outl(0x0, 0x434); + outl(0x01, 0x438); + outb(0x0, 0x442); + outl(0xffff7fff, 0x448); + outw(0x001, 0x404); +*/ +} +void S3_ps2_kb_ms_wakeup(struct device *dev) +{ u8 enables; + enables = pci_read_config8(dev, 0x51); + enables |= 2; + pci_write_config8(dev, 0x51, enables); + + outb(0xe0, 0x2e); + outb(0x0b, 0x2f);//if 09,then only support kb wakeup + + outb(0xe1, 0x2e);//set any key scan code can wakeup + outb(0x00, 0x2f); + + outb(0xe9, 0x2e);//set any mouse scan code can wakeup + outb(0x00, 0x2f); + + enables &= 0xd; + pci_write_config8(dev, 0x51, enables); + + outb(inb(VX800_ACPI_IO_BASE+0x02)|0x20, VX800_ACPI_IO_BASE+0x02);//ACPI golabe enable for sci smi trigger + outw(inw(VX800_ACPI_IO_BASE+0x22)|0x204, VX800_ACPI_IO_BASE+0x22);//ACPI SCI on Internal KBC PME and mouse PME + +} +void S3_usb_wakeup(struct device *dev) +{ + outw(inw(VX800_ACPI_IO_BASE+0x22)|0x4000, VX800_ACPI_IO_BASE+0x22);//SCI on USB PME +} + +void S3_lid_wakeup(struct device *dev) +{ + outw(inw(VX800_ACPI_IO_BASE+0x22)|0x800, VX800_ACPI_IO_BASE+0x22);//SCI on LID PME +} + + +/* This looks good enough to work, maybe */ +static void vx800_sb_init(struct device *dev) +{ + unsigned char enables; + + // enable the internal I/O decode + enables = pci_read_config8(dev, 0x6C); + enables |= 0x80; + pci_write_config8(dev, 0x6C, enables); + + // Map 4MB of FLASH into the address space +// pci_write_config8(dev, 0x41, 0x7f); + + // Set bit 6 of 0x40, because Award does it (IO recovery time) + // IMPORTANT FIX - EISA 0x4d0 decoding must be on so that PCI + // interrupts can be properly marked as level triggered. + enables = pci_read_config8(dev, 0x40); + enables |= 0x44; + pci_write_config8(dev, 0x40, enables); + + /* DMA Line buffer control */ + enables = pci_read_config8(dev, 0x42); + enables |= 0xf0; + pci_write_config8(dev, 0x42, enables); + + /* I/O recovery time */ + pci_write_config8(dev, 0x4c, 0x44); + + /* ROM memory cycles go to LPC. */ + pci_write_config8(dev, 0x59, 0x80); + + /* Set 0x5b to 0x01 to match Award */ + //pci_write_config8(dev, 0x5b, 0x01); + enables = pci_read_config8(dev, 0x5b); + enables |= 0x01; + pci_write_config8(dev, 0x5b, enables); + + + /* Set Read Pass Write Control Enable */ + pci_write_config8(dev, 0x48, 0x0c); + + /* Set 0x58 to 0x42 APIC and RTC. */ + //pci_write_config8(dev, 0x58, 0x42); this cmd cause the irq0 can not be triggerd,since bit 5 was set to 0. + enables=pci_read_config8(dev, 0x58); + enables|=0x41;// + pci_write_config8(dev, 0x58,enables); + + + /* Set bit 3 of 0x4f to match award (use INIT# as cpu reset) */ + enables = pci_read_config8(dev, 0x4f); + enables |= 0x08; + pci_write_config8(dev, 0x4f, enables); + + /* enable serial irq */ + pci_write_config8(dev, 0x52, 0x9); + + /* dma */ + pci_write_config8(dev, 0x53, 0x00); + + // Power management setup + setup_pm(dev); + + /* set up isa bus -- i/o recovery time, rom write enable, extend-ale */ + pci_write_config8(dev, 0x40, 0x54); + + // Start the rtc + rtc_init(0); +} + +/* total kludge to get lxb to call our childrens set/enable functions - these are + not called unless this device has a resource to set - so set a dummy one */ +void vx800_read_resources(device_t dev) +{ + + struct resource *resource; + pci_dev_read_resources(dev); + resource = new_resource(dev, 1); + resource->flags |= IORESOURCE_FIXED | IORESOURCE_ASSIGNED | IORESOURCE_IO | IORESOURCE_STORED; + resource->size = 2; + resource->base = 0x2e; + +} +void vx800_set_resources(device_t dev) +{ + struct resource *resource; + resource = find_resource(dev,1); + resource->flags |= IORESOURCE_STORED; + pci_dev_set_resources(dev); +} + +void vx800_enable_resources(device_t dev) + { + /* vx800 is not a pci bridge and has no resources of its own (other than + standard PC i/o addresses). however it does control the isa bus and so + we need to manually call enable childrens resources on that bus */ + /* TODO: do we even care about ISA? If so, for what? SuperIO on LPC bus */ + pci_dev_enable_resources(dev); + enable_childrens_resources(dev); +} + +static void southbridge_init(struct device *dev) +{ + printk_debug("vx800 sb init\n"); + vx800_sb_init(dev); + pci_routing_fixup(dev); + + setup_i8259(); // make sure interupt controller is configured before keyboard init + + /* turn on keyboard and RTC, no need to visit this reg twice */ + init_pc_keyboard(0x60, 0x64, 0); + printk_debug("ps2 usb lid, you set who can wakeup system from s3 sleep\n"); + S3_ps2_kb_ms_wakeup(dev); + S3_usb_wakeup(dev); + +/* enable acpi cpu c3 state. (c2 state need not do anything.) + #1 + fadt->pm2_cnt_blk = 0x22;//to support cpu-c3 + fadt->p_lvl2_lat = 0x50; //this is the coreboot source + fadt->p_lvl3_lat = 0x320;// + fadt->pm2_cnt_len = 1;//to support cpu-c3 + #2 + ssdt? ->every cpu has a P_BLK address. set it to 0x10 (so that "Read Processor Level3 register(PMIORx15<7:0>) to enter C3 state"---VIA vx800 P SPEC ) + #3 write 0x17 in to PMIO=VX800_ACPI_IO_BASE + 0x26, following the describtion in the P-spec. + 1 enable SLP# asserts in C3 state PMIORx26<1> =1 + 2 enable CPUSTP# asserts in C3 state; PMIORx26<2> =1 + 3 CLKRUN# is always asserted PMIORx26<3> =0 + 4 Disable PCISTP# When CLKRUN# is asserted + 1: PCISTP# will not assert When CLKRUN# is asserted + PMIORx26<4> =1 + 5 This bit controls whether the CPU voltage is lowered when in C3/S1 state. + VRDSLP will be active in either this bit set in C3 or LVL4 register read + PMIORx26<0> =0 + 6 Read Processor Level3 register(PMIORx15<7:0>) to enter C3 state PMIORx15 + */ + outb(0x17, VX800_ACPI_IO_BASE + 0x26); + +} + +static struct device_operations vx800_lpc_ops = { + .read_resources = vx800_read_resources, + .set_resources = vx800_set_resources, + .enable_resources = vx800_enable_resources, + .init = &southbridge_init, + .scan_bus = scan_static_bus, +}; + +static struct pci_driver lpc_driver __pci_driver = { + .ops = &vx800_lpc_ops, + .vendor = PCI_VENDOR_ID_VIA, + .device = PCI_DEVICE_ID_VIA_VX855_LPC, +};
-
svn＠coreboot.org