-----Original Message----- From: mcqmcqmcq@fastmail.fm [mailto:mcqmcqmcq@fastmail.fm] Sent: Wednesday, December 13, 2006 3:54 PM
mptable.c has all this stuff about 8132s when the chip on the board is actually an 8131 (or so says lspci in Iwill bios as well as all
the
Iwill literature; I haven't pulled off the heatsink to verify). I assume this doesn't matter?
Just a symbol, the GSI for 8132 is 7, and 4 for 8131.
So what's the story on A/B naming? I thought that the A-bus was the one that everybody runs at 133 and the B was the one that had some problem that maxed it out at 100. The names appear to be used in the opposite sense in the mptable.c -- can somebody correct my misconception here?
If you have two pcix device on one, you need to downgrade the speed from 133 to 100 by jump, or...
YH
-
Lu, Yinghai