No. It seems there is one MB need to set..., I forget the model...
But amd chipset base MB should be ok to comment that out...
YH
-----Original Message----- From: Stefan Reinauer [mailto:stepan@coresystems.de] Sent: Thursday, May 11, 2006 10:01 AM To: Lu, Yinghai Cc: vincentetsou@nexcom.com.tw; linuxbios@linuxbios.org Subject: Re: [LinuxBIOS] New guy in LinuxBios
* Lu, Yinghai yinghai.lu@amd.com [060511 18:32]:
Comment out several lines about links in resourcemap.c.
Can we just comment this out? Or would we need to put the link number in the registers before writing?
Dear Lu and Stefan,
Thank you very much for your reply.
But I can't find the inherent_ht.c in my LinuxBios source tree. Should I download this one from somewhere? or you can send one to me.
Thanks.
2006/5/12, Lu, Yinghai yinghai.lu@amd.com:
No. It seems there is one MB need to set..., I forget the model...
But amd chipset base MB should be ok to comment that out...
YH
-----Original Message----- From: Stefan Reinauer [mailto:stepan@coresystems.de] Sent: Thursday, May 11, 2006 10:01 AM To: Lu, Yinghai Cc: vincentetsou@nexcom.com.tw; linuxbios@linuxbios.org Subject: Re: [LinuxBIOS] New guy in LinuxBios
- Lu, Yinghai yinghai.lu@amd.com [060511 18:32]:
Comment out several lines about links in resourcemap.c.
Can we just comment this out? Or would we need to put the link number in the registers before writing?
-- coresystems GmbH * Brahmsstr. 16 * D-79104 Freiburg i. Br. Tel.: +49 761 7668825 * Fax: +49 761 7664613 Email: info@coresystems.de * http://www.coresystems.de/
* Vincente Tsou vincentetsou@nexcom.com.tw [060512 06:22]:
Dear Lu and Stefan,
Thank you very much for your reply.
But I can't find the inherent_ht.c in my LinuxBios source tree.
Yinghai is talking about src/northbridge/amd/amdk8/incoherent_ht.c
You need to try commenting out the lines I sent in the last mail from src/northbridge/amd/amdk8/resourcemap.c
Stefan
Hello,
Finally my linuxbios bring up the target board.
capture5.txt is booting log.
But most of device on the target board are not work. Such as BCM5704 under PCI-X bridge.
If I try to load "tg3" module into the kernel, I got error message like this, [root@linuxbios ~]# modprobe tg3 PCI: No IRQ known for interrupt pin A of device 0000:03:04.0. Please try using pci=biosirq. PCI: No IRQ known for interrupt pin B of device 0000:03:04.1. Please try using pci=biosirq.
How to assign an IRQ for each device ??
2006/5/12, Stefan Reinauer stepan@coresystems.de:
- Vincente Tsou vincentetsou@nexcom.com.tw [060512 06:22]:
Dear Lu and Stefan,
Thank you very much for your reply.
But I can't find the inherent_ht.c in my LinuxBios source tree.
Yinghai is talking about src/northbridge/amd/amdk8/incoherent_ht.c
You need to try commenting out the lines I sent in the last mail from src/northbridge/amd/amdk8/resourcemap.c
Stefan
-- coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br. Tel.: +49 761 7668825 • Fax: +49 761 7664613 Email: info@coresystems.de • http://www.coresystems.de/