This patch added arm toolchain support for coreboot building system.
xcompile will find the different toolchain for X86 and ARM architectures and when we decided the target architecture using `make menuconfig` or so, makefile will choose the right toolchain.
Signed-off-by: Yang Bai hamo.by@gmail.com
Index: src/Kconfig =================================================================== --- src/Kconfig (revision 6567) +++ src/Kconfig (working copy) @@ -116,10 +116,19 @@ bool default n
+# This option is used to set the architecture of a mainboard to ARM. +config ARCH_ARM + bool + default n + if ARCH_X86 source src/arch/x86/Kconfig endif
+if ARCH_ARM +source src/arch/arm/Kconfig +endif + menu "Chipset"
comment "CPU" Index: src/arch/arm/Kconfig =================================================================== --- src/arch/arm/Kconfig (revision 0) +++ src/arch/arm/Kconfig (revision 0) @@ -0,0 +1,3 @@ +menu "Architecture (ARM)" + +endmenu Index: util/xcompile/xcompile =================================================================== --- util/xcompile/xcompile (revision 6567) +++ util/xcompile/xcompile (working copy) @@ -3,6 +3,7 @@ # This file is part of the coreboot project. # # Copyright (C) 2007-2010 coresystems GmbH +# Copyright (C) 2011 Yang Bai hamo.by@gmail.com # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -34,20 +35,27 @@ fi done
-GCCPREFIX=invalid -TMPFILE=`mktemp /tmp/temp.XXXX 2>/dev/null || echo /tmp/temp.78gOIUGz` -touch $TMPFILE +TWIDTH=32 +for TARCH in i386 littlearm; do
-# This should be a loop over all supported architectures -TARCH=i386 -TWIDTH=32 -for gccprefixes in `pwd`/util/crossgcc/xgcc/bin/${TARCH}-elf- ${TARCH}-elf- ""; do + GCCPREFIX=invalid + + if [ ${TARCH} == "i386" ]; then + CARCH=${TARCH}-elf + elif [ ${TARCH} == "littlearm" ]; then + CARCH=arm-none-eabi + fi + + TMPFILE=`mktemp /tmp/temp.XXXX 2>/dev/null || echo /tmp/temp.78gOIUGz` + touch $TMPFILE + + for gccprefixes in `pwd`/util/crossgcc/xgcc/bin/${CARCH}- ${CARCH}- ""; do if ! which ${gccprefixes}as 2>/dev/null >/dev/null; then - continue + continue fi rm -f ${TMPFILE}.o if ${gccprefixes}as -o ${TMPFILE}.o ${TMPFILE}; then - TYPE=`${gccprefixes}objdump -p ${TMPFILE}.o` + TYPE=`${gccprefixes}objdump -p ${TMPFILE}.o | grep "file format"` if [ ${TYPE##* } == "elf${TWIDTH}-${TARCH}" ]; then GCCPREFIX=$gccprefixes ASFLAGS= @@ -56,47 +64,44 @@ break fi fi - if ${gccprefixes}as --32 -o ${TMPFILE}.o ${TMPFILE}; then - TYPE=`${gccprefixes}objdump -p ${TMPFILE}.o` + if [ ${TARCH} == "i386" ]; then + if ${gccprefixes}as --32 -o ${TMPFILE}.o ${TMPFILE}; then + TYPE=`${gccprefixes}objdump -p ${TMPFILE}.o | grep "file format"` if [ ${TYPE##* } == "elf${TWIDTH}-${TARCH}" ]; then - GCCPREFIX=$gccprefixes - ASFLAGS=--32 - CFLAGS="-m32 " - LDFLAGS="-b elf32-i386" - break + GCCPREFIX=$gccprefixes + ASFLAGS=--32 + CFLAGS="-m32 " + LDFLAGS="-b elf32-i386" + break fi + fi fi -done -rm -f $TMPFILE ${TMPFILE}.o + done + rm -f $TMPFILE ${TMPFILE}.o
-if [ "$GCCPREFIX" = "invalid" ]; then - echo '$(error no suitable gcc found)' - exit 1 -fi - -CC="${GCCPREFIX}gcc" -testcc "$CC" "$CFLAGS-Wa,--divide " && CFLAGS="$CFLAGS-Wa,--divide " -testcc "$CC" "$CFLAGS-fno-stack-protector " && CFLAGS="$CFLAGS-fno-stack-protector " -testcc "$CC" "$CFLAGS-Wl,--build-id=none " && CFLAGS="$CFLAGS-Wl,--build-id=none " - -if which gcc 2>/dev/null >/dev/null; then - HOSTCC=gcc -else - HOSTCC=cc -fi - -cat << EOF + if [ "$GCCPREFIX" != "invalid" ]; then + CC="${GCCPREFIX}gcc" + testcc "$CC" "$CFLAGS-Wa,--divide " && CFLAGS="$CFLAGS-Wa,--divide " + testcc "$CC" "$CFLAGS-fno-stack-protector " && CFLAGS="$CFLAGS-fno-stack-protector " + testcc "$CC" "$CFLAGS-Wl,--build-id=none " && CFLAGS="$CFLAGS-Wl,--build-id=none " + cat << EOF # elf${TWIDTH}-${TARCH} toolchain -AS:=${GCCPREFIX}as ${ASFLAGS} -CC:=${GCCPREFIX}gcc ${CFLAGS} -AR:=${GCCPREFIX}ar -LD:=${GCCPREFIX}ld ${LDFLAGS} -STRIP:=${GCCPREFIX}strip -NM:=${GCCPREFIX}nm -OBJCOPY:=${GCCPREFIX}objcopy -OBJDUMP:=${GCCPREFIX}objdump - -# native toolchain -HOSTCC:=${HOSTCC} +AS_${TARCH}:=${GCCPREFIX}as ${ASFLAGS} +CC_${TARCH}:=${GCCPREFIX}gcc ${CFLAGS} +AR_${TARCH}:=${GCCPREFIX}ar +LD_${TARCH}:=${GCCPREFIX}ld ${LDFLAGS} +STRIP_${TARCH}:=${GCCPREFIX}strip +NM_${TARCH}:=${GCCPREFIX}nm +OBJCOPY_${TARCH}:=${GCCPREFIX}objcopy +OBJDUMP_${TARCH}:=${GCCPREFIX}objdump EOF + else + cat <<EOF +# elf${TWIDTH}-${TARCH} toolchain +NO_${TARCH}_TOOLCHAIN:=1 +EOF + fi
+unset AS CC AR LD STRIP NM OBJCOPY OBJDUMP GCCPREFIX ASFLAGS CFLAGS LDFLAGS CARCH + +done Index: Makefile =================================================================== --- Makefile (revision 6567) +++ Makefile (working copy) @@ -101,7 +101,42 @@
include $(HAVE_DOTCONFIG)
+# Set the toolchain variables +# FOR X86 +ifeq ($(CONFIG_ARCH_X86),y) +ifeq ($(NO_i386_TOOLCHAIN),1) +$(error No suitable gcc for X86 found) +else ifneq ($(INNER_SCANBUILD),y) +CC:=$(CC_i386) +endif +AS:=$(AS_i386) +AR:=$(AR_i386) +LD:=$(LD_i386) +STRIP:=$(STRIP_i386) +NM:=$(NM_i386) +OBJCOPY:=$(OBJCOPY_i386) +OBJDUMP:=$(OBJDUMP_i386) +endif +endif + +# FOR ARM +ifeq ($(CONFIG_ARCH_ARM),y) +ifeq ($(NO_littlearm_TOOLCHAIN),1) +$(error No suitable gcc for ARM found) +else +CC:=$(CC_littlearm) +AS:=$(AS_littlearm) +AR:=$(AR_littlearm) +LD:=$(LD_littlearm) +STRIP:=$(STRIP_littlearm) +NM:=$(NM_littlearm) +OBJCOPY:=$(OBJCOPY_littlearm) +OBJDUMP:=$(OBJDUMP_littlearm) +endif +endif + +ifneq ($(INNER_SCANBUILD),y) ifeq ($(CONFIG_COMPILER_LLVM_CLANG),y) CC:=clang -m32 HOSTCC:=clang
Hi Hamo,
Thanks for the patch. I know you need this for your ARM development, but we should wait for an ARM target before committing this.
This fundamentally changes how .xcompile is used and included by coreboot. I think that I would prefer that the xcompile script accept a flag for using the ARM toolchain over the x86 tools and still set the compiler variables.
Marc
On Mon, May 23, 2011 at 6:14 AM, Hamo hamo.by@gmail.com wrote:
This patch added arm toolchain support for coreboot building system.
xcompile will find the different toolchain for X86 and ARM architectures and when we decided the target architecture using `make menuconfig` or so, makefile will choose the right toolchain.
Signed-off-by: Yang Bai hamo.by@gmail.com
...
- if ${gccprefixes}as --32 -o ${TMPFILE}.o ${TMPFILE}; then
- TYPE=`${gccprefixes}objdump -p ${TMPFILE}.o`
- if [ ${TARCH} == "i386" ]; then
- if ${gccprefixes}as --32 -o ${TMPFILE}.o ${TMPFILE}; then
- TYPE=`${gccprefixes}objdump -p ${TMPFILE}.o | grep "file format"`
if [ ${TYPE##* } == "elf${TWIDTH}-${TARCH}" ]; then
- GCCPREFIX=$gccprefixes
- ASFLAGS=--32
- CFLAGS="-m32 "
- LDFLAGS="-b elf32-i386"
- break
- GCCPREFIX=$gccprefixes
- ASFLAGS=--32
- CFLAGS="-m32 "
- LDFLAGS="-b elf32-i386"
- break
fi
- fi
fi -done -rm -f $TMPFILE ${TMPFILE}.o
- done
- rm -f $TMPFILE ${TMPFILE}.o
Be careful with whitespace changes. Try not to put to many in with code changes.
-if [ "$GCCPREFIX" = "invalid" ]; then
- echo '$(error no suitable gcc found)'
- exit 1
-fi
-CC="${GCCPREFIX}gcc" -testcc "$CC" "$CFLAGS-Wa,--divide " && CFLAGS="$CFLAGS-Wa,--divide " -testcc "$CC" "$CFLAGS-fno-stack-protector " && CFLAGS="$CFLAGS-fno-stack-protector " -testcc "$CC" "$CFLAGS-Wl,--build-id=none " && CFLAGS="$CFLAGS-Wl,--build-id=none "
-if which gcc 2>/dev/null >/dev/null; then
- HOSTCC=gcc
-else
- HOSTCC=cc
-fi
-cat << EOF
- if [ "$GCCPREFIX" != "invalid" ]; then
- CC="${GCCPREFIX}gcc"
- testcc "$CC" "$CFLAGS-Wa,--divide " && CFLAGS="$CFLAGS-Wa,--divide "
- testcc "$CC" "$CFLAGS-fno-stack-protector " &&
CFLAGS="$CFLAGS-fno-stack-protector "
- testcc "$CC" "$CFLAGS-Wl,--build-id=none " &&
CFLAGS="$CFLAGS-Wl,--build-id=none "
- cat << EOF
# elf${TWIDTH}-${TARCH} toolchain -AS:=${GCCPREFIX}as ${ASFLAGS} -CC:=${GCCPREFIX}gcc ${CFLAGS} -AR:=${GCCPREFIX}ar -LD:=${GCCPREFIX}ld ${LDFLAGS} -STRIP:=${GCCPREFIX}strip -NM:=${GCCPREFIX}nm -OBJCOPY:=${GCCPREFIX}objcopy -OBJDUMP:=${GCCPREFIX}objdump
-# native toolchain -HOSTCC:=${HOSTCC} +AS_${TARCH}:=${GCCPREFIX}as ${ASFLAGS} +CC_${TARCH}:=${GCCPREFIX}gcc ${CFLAGS} +AR_${TARCH}:=${GCCPREFIX}ar +LD_${TARCH}:=${GCCPREFIX}ld ${LDFLAGS} +STRIP_${TARCH}:=${GCCPREFIX}strip +NM_${TARCH}:=${GCCPREFIX}nm +OBJCOPY_${TARCH}:=${GCCPREFIX}objcopy +OBJDUMP_${TARCH}:=${GCCPREFIX}objdump EOF
- else
- cat <<EOF
+# elf${TWIDTH}-${TARCH} toolchain +NO_${TARCH}_TOOLCHAIN:=1 +EOF
- fi
+unset AS CC AR LD STRIP NM OBJCOPY OBJDUMP GCCPREFIX ASFLAGS CFLAGS LDFLAGS CARCH
+done
Index: Makefile
--- Makefile (revision 6567) +++ Makefile (working copy) @@ -101,7 +101,42 @@
include $(HAVE_DOTCONFIG)
+# Set the toolchain variables +# FOR X86 +ifeq ($(CONFIG_ARCH_X86),y) +ifeq ($(NO_i386_TOOLCHAIN),1) +$(error No suitable gcc for X86 found) +else ifneq ($(INNER_SCANBUILD),y) +CC:=$(CC_i386) +endif +AS:=$(AS_i386) +AR:=$(AR_i386) +LD:=$(LD_i386) +STRIP:=$(STRIP_i386) +NM:=$(NM_i386) +OBJCOPY:=$(OBJCOPY_i386) +OBJDUMP:=$(OBJDUMP_i386) +endif +endif
+# FOR ARM +ifeq ($(CONFIG_ARCH_ARM),y) +ifeq ($(NO_littlearm_TOOLCHAIN),1) +$(error No suitable gcc for ARM found) +else +CC:=$(CC_littlearm) +AS:=$(AS_littlearm) +AR:=$(AR_littlearm) +LD:=$(LD_littlearm) +STRIP:=$(STRIP_littlearm) +NM:=$(NM_littlearm) +OBJCOPY:=$(OBJCOPY_littlearm) +OBJDUMP:=$(OBJDUMP_littlearm) +endif +endif
+ifneq ($(INNER_SCANBUILD),y) ifeq ($(CONFIG_COMPILER_LLVM_CLANG),y) CC:=clang -m32 HOSTCC:=clang
I think that these makefile changes shouldn't be needed as long as coreboot is including the correct settings from the .xcompile file.
Marc
Am 23.05.2011 21:54, schrieb Marc Jones:
This fundamentally changes how .xcompile is used and included by coreboot. I think that I would prefer that the xcompile script accept a flag for using the ARM toolchain over the x86 tools and still set the compiler variables.
We create .xcompile much earlier than the decision which toolchain is necessary for the current build.
In case full abuild runs (see buildbot) that could be a single invocation of util/xcompile/xcompile when configuring for the first board, after which .xcompile is reused for all others.
It would be much more intrusive to change the way we create .xcompile than what Hamo does here.
Patrick
On Wed, May 25, 2011 at 7:16 AM, Patrick Georgi patrick@georgi-clan.de wrote:
Am 23.05.2011 21:54, schrieb Marc Jones:
This fundamentally changes how .xcompile is used and included by coreboot. I think that I would prefer that the xcompile script accept a flag for using the ARM toolchain over the x86 tools and still set the compiler variables.
We create .xcompile much earlier than the decision which toolchain is necessary for the current build.
In case full abuild runs (see buildbot) that could be a single invocation of util/xcompile/xcompile when configuring for the first board, after which .xcompile is reused for all others.
It would be much more intrusive to change the way we create .xcompile than what Hamo does here.
I see. I didn't think about abuild.
Marc
Hi Marc, I am working on porting coreboot to qemu-arm (versatilepb) mainboard, and after I finish it, we can commit it together with this patch. But now, the most important thing is changing the CBFS structure.
On Tue, May 24, 2011 at 3:54 AM, Marc Jones marcj303@gmail.com wrote:
Hi Hamo,
Thanks for the patch. I know you need this for your ARM development, but we should wait for an ARM target before committing this.
This fundamentally changes how .xcompile is used and included by coreboot. I think that I would prefer that the xcompile script accept a flag for using the ARM toolchain over the x86 tools and still set the compiler variables.
Marc
Be careful with whitespace changes. Try not to put to many in with code changes.
Thanks. I will care about it next time.
I think that these makefile changes shouldn't be needed as long as coreboot is including the correct settings from the .xcompile file.
makefile uses CC(AS, LD and others) as the default compiler, but now, xcompile generated CC_ARCH. So we need to bind the right CC_ARCH variable(and others of cause) to CC.
Marc
Am 23.05.2011 14:14, schrieb Hamo:
+ifeq ($(CONFIG_ARCH_X86),y) +ifeq ($(NO_i386_TOOLCHAIN),1) +$(error No suitable gcc for X86 found) +else ifneq ($(INNER_SCANBUILD),y) +CC:=$(CC_i386) +endif +AS:=$(AS_i386) +AR:=$(AR_i386) +LD:=$(LD_i386)
That could be implemented somewhat more generic by using nested variable expansion:
CC:=$(CC_$(CONFIG_ARCH))
and have Kconfig select the right ARCH value depending on the other booleans:
config ARCH string default X86 if ARCH_X86 default ARM if ARCH_ARM
And the test for "suitable toolchain found" can be generalized by testing for _some_ value in $(CC) after the assignements happened:
ifeq ($(CC),) $(error no toolchain for architecture '$(CONFIG_ARCH)' found) endif
Patrick
-
Hamo -
Marc Jones -
Patrick Georgi