Re: [coreboot] coreboot debugging with qemu-x86

[Ajoy Das]

Try giving
-m 1g

Ajoy

On Fri, May 8, 2015 at 3:55 PM, Saket Sinha  wrote:
> Hi,
>
> I am trying to debug coreboot with qemu-x86 with the following command -
>
> qemu-system-x86  -L . -bios coreboot.rom -nographic
>
> I am getting output something like this - http://pastebin.com/Ae2X5sPe
>
> (Also pasted below)
> EAX=00000000 EBX=00000000 ECX=00000000 EDX=00000633
> ESI=00000000 EDI=00000000 EBP=00000000 ESP=00000000
> EIP=0000fff0 EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0
> ES =0000 00000000 0000ffff 00009300
> CS =f000 ffff0000 0000ffff 00009b00
> SS =0000 00000000 0000ffff 00009300
> DS =0000 00000000 0000ffff 00009300
> FS =0000 00000000 0000ffff 00009300
> GS =0000 00000000 0000ffff 00009300
> LDT=0000 00000000 0000ffff 00008200
> TR =0000 00000000 0000ffff 00008b00
> GDT=     00000000 0000ffff
> IDT=     00000000 0000ffff
> CR0=60000010 CR2=00000000 CR3=00000000 CR4=00000000
> DR0=00000000 DR1=00000000 DR2=00000000 DR3=00000000
> DR6=ffff0ff0 DR7=00000400
>
> I have build coreboot.rom with the following option in .config -
>
> Payload  ---> Add a payload ---> FILO ;
> Payload  ---> FILO version ---> HEAD
>
> Kindly let me know if I am missing something here.
>
> Regards,
> Saket Sinha