Thanks, Peter
I send you the full serial output . As you can see in rom_stream: 0xfffe0000 - 0xfffeffff there is only 0xFF ??
Best Regards Ing. Hanoi Santos Hung Instituto Central de Investigación Digital
On Mon, Nov 05, 2007 at 03:45:55PM -0500, Hanoi Santos Hung wrote:
Hi : I'm working with this hardware configuration : North : vt8605 South : vt82C686B RAM : 128 MB SODIMM
I begin modifying the code from vt8601 and LinuxBIOS V1.0 version of vt82c686
Wow, 1.0 is really old. Was there no board in 2.0 that was similar to your board? Perhaps one of the EPIA boards?
and I have my system working until it tries to load the payload (filo). I think the problem was the memory, but ram_check(0x00000000, 0xA0000); ram_check(0x00100000, 0x8000000);
works perfectly,
ram_check() is a _VERY_ simplistic memory test, RAM is not neccessarily working properly just because it does not fail.
Please try to use memtest86 as payload before FILO or anything else.
another symptom : when the board make a cold start it freeze at "Jumping to LinuxBIOS".
I'll apreciate any help
Please send the full serial output you get from the board.
//Peter