Re: [coreboot] r1002 - in coreboot-v3/arch/x86: . intel/core2

[Carl-Daniel Hailfinger]

On 12.11.2008 15:12, [e-mail] wrote:
> Author: stepan
> Date: 2008-11-12 15:12:32 +0100 (Wed, 12 Nov 2008)
> New Revision: 1002
>
> Added:
>    coreboot-v3/arch/x86/intel/core2/stage0.S
> Modified:
>    coreboot-v3/arch/x86/Makefile
> Log:
> initial intel core car code.
>
> Signed-off-by: Stefan Reinauer 
> Acked-by: Stefan Reinauer

Hey, that's unfair! ;-) I was working on exactly the same piece of code.
Oh well. I'll prepare my cleanup patches for v3, then.

Regards,
Carl-Daniel

r1002 - in coreboot-v3/arch/x86: . intel/core2

[Stefan Reinauer]

Carl-Daniel Hailfinger wrote:
> On 12.11.2008 15:12, [e-mail] wrote:
> > Author: stepan
> > Date: 2008-11-12 15:12:32 +0100 (Wed, 12 Nov 2008)
> > New Revision: 1002
> >
> > Added:
> >    coreboot-v3/arch/x86/intel/core2/stage0.S
> > Modified:
> >    coreboot-v3/arch/x86/Makefile
> > Log:
> > initial intel core car code.
> >
> > Signed-off-by: Stefan Reinauer 
> > Acked-by: Stefan Reinauer
>
> Hey, that's unfair! ;-) I was working on exactly the same piece of code.
> Oh well. I'll prepare my cleanup patches for v3, then.

Sorry, I thought I mentioned that I'm working on this.

Do you have 945 hardware around for testing?

There's enough work to be done. Right now the board does not even compile.

Stefan

r1002 - in coreboot-v3/arch/x86: . intel/core2

[Carl-Daniel Hailfinger]

On 12.11.2008 16:15, Stefan Reinauer wrote:
> Carl-Daniel Hailfinger wrote:
> > On 12.11.2008 15:12, [e-mail] wrote:
> > > Author: stepan
> > > Date: 2008-11-12 15:12:32 +0100 (Wed, 12 Nov 2008)
> > > New Revision: 1002
> > >
> > > Added:
> > >    coreboot-v3/arch/x86/intel/core2/stage0.S
> > > Modified:
> > >    coreboot-v3/arch/x86/Makefile
> > > Log:
> > > initial intel core car code.
> > >
> > > Signed-off-by: Stefan Reinauer 
> > > Acked-by: Stefan Reinauer
> >
> > Hey, that's unfair! ;-) I was working on exactly the same piece of code.
> > Oh well. I'll prepare my cleanup patches for v3, then.
>
> Sorry, I thought I mentioned that I'm working on this.

Yes, but since it's been a while since you said that, I assumed the port
was preempted by higher priority work on v2 targets.
> Do you have 945 hardware around for testing?

No.
> There's enough work to be done. Right now the board does not even compile.

I'll tackle the Core2 CAR code in v3 and clean it up a bit (and port
cleanups from the Core2 code to other CPUs) and try to get it to compile.

Regards,
Carl-Daniel