[LinuxBIOS] Tyan S2865 is alive!

[Jeremy Jackson]

Well not unless you require RAM...

I just copied sunw/ultra40, adjusted superIO for serial output, and
whacked a bunch of stuff that looked like it was for 2nd CPU (it's a UP
board).  Sure wish I knew what I was doing!

LinuxBIOS-2.0.0_ultra40_Fallback Wed Apr 11 21:26:06 EDT 2007
starting...                                                                         
Enabling routing table for node 00
done.                                                                                                          
Enabling UP
settings                                                                                                                              
Disabling read/write/fill probes for UP...
done.                                                                                                  
coherent_ht_finalize                                                                                                                              
done                                                                                                                                              
core0
started:                                                                                                                                    
started ap
apicid:                                                                                                                                
SBLink=00                                                                                                                                         
NC node|
link=00                                                                                                                                   
ht reset
-

LinuxBIOS-2.0.0_ultra40_Fallback Wed Apr 11 21:26:06 EDT 2007
starting...                                                                         
Enabling routing table for node 00
done.                                                                                                          
Enabling UP
settings                                                                                                                              
Disabling read/write/fill probes for UP...
done.                                                                                                  
coherent_ht_finalize                                                                                                                              
done                                                                                                                                              
core0
started:                                                                                                                                    
started ap
apicid:                                                                                                                                
SBLink=00                                                                                                                                         
NC node|
link=00                                                                                                                                   
SMBus controller
enabled                                                                                                                          
Ram1.00                                                                                                                                           
setting up CPU00 northbridge
registers                                                                                                            
done.                                                                                                                                             
Ram2.00                                                                                                                                           
No memory for this
cpu                                                                                                                            
Ram3                                                                                                                                              
No
memory