I've done a bit of looking, and found the code in question. It looks like the code is trying to figure out what family10 proc it is. The only problem, it's running a bulldozer processor. cpuinfo lists it as a family 21. Are the fx family processors supported at all?
~Jonathan
That's pretty clear. I suggest to boot with factory BIOS, check the exact parameters of the CPU, look at the code which is being run, and look for relevant documentation for your CPU in the scope of that code.
If you are lucky you only need to add a few values from the documentation to tables in the code.
//Peter On Tue, Apr 3, 2012 at 5:24 PM, Jonathan Bennett jbscience87@gmail.com wrote:
On Tue, Mar 20, 2012 at 4:36 PM, Julian Shulika hercares@gmail.com wrote:
Could you please show log from serial,your board has com port.
Finally got a couple spare flash chips and a way to capture the serial output.
coreboot-4.0-2227-g4a2daf6 Tue Apr 3 15:29:40 CDT 2012 starting...
BSP Family_Model: 00600f12 *sysinfo range: [000cc000,000cf360] bsp_apicid = 00 cpu_init_detectedx = 00000000 microcode: rev id not foung, Skipping microcode patch! POST: 0x33 cpuSetAMDMSR FIXME! CPU Version unknown or not supported! FIXME! CPU Version unknown or not supported! FIXME! CPU Version unknown or not supported! done POST: 0x34 Enter amd_ht_init()
-
Jonathan Bennett