jtd wrote:
On Thursday 10 April 2008 09:53 pm, Antoine Martin wrote: / Hi,
/>/ />/ I've got this board I would like to get coreboot flashed on: />/ *eBox-3850 />/ **http://www.icoptech.com/ebox-pc/* />/ />/ 1) CPU is a via C3 Nemehia />/ Northbridge is a VT8623 />/ Southbridge is a VT82xxxxx? />/ />/ 2) # lspci />/ 00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266] />/ 00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 />/ AGP] 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI />/ USB 1.1 Controller (rev 80) />/ 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) />/ 00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge />/ 00:11.1 IDE interface: VIA Technologies, Inc. />/ VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) />/ 00:11.5 Multimedia audio controller: VIA Technologies, Inc. />/ VT8233/A/8235/8237 AC97 Audio Controller (rev 50) />/ 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 />/ [Rhine-II] (rev 74) />/ 01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623 />/ [Apollo CLE266] integrated CastleRock graphics (rev 03) />/ />/ 3) Super I/O: via VT1211 / Almost the same as the idot mobo i am working on without much success :(. Only the network controller is different.
How far did you get? Does anything initialize at all?
00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266] 00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50) 01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock graphics (rev 03)
Does spd work on the epia / epia-m
Dunno. I've had some good results with coreboot + epia-m before (can't remember anything about spd).
Cheers Antoine
On Tuesday 22 April 2008 10:24 pm, Antoine Martin wrote:
jtd wrote:
On Thursday 10 April 2008 09:53 pm, Antoine Martin wrote: / Hi,
/>/ />/ I've got this board I would like to get coreboot flashed on: />/ *eBox-3850 />/ **http://www.icoptech.com/ebox-pc/* />/ />/ 1) CPU is a via C3 Nemehia />/ Northbridge is a VT8623 />/ Southbridge is a VT82xxxxx? />/ />/ 2) # lspci />/ 00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266] />/ 00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 />/ AGP] 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI />/ USB 1.1 Controller (rev 80) />/ 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) />/ 00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge />/ 00:11.1 IDE interface: VIA Technologies, Inc. />/ VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) />/ 00:11.5 Multimedia audio controller: VIA Technologies, Inc. />/ VT8233/A/8235/8237 AC97 Audio Controller (rev 50) />/ 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 />/ [Rhine-II] (rev 74) />/ 01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623 />/ [Apollo CLE266] integrated CastleRock graphics (rev 03) />/ />/ 3) Super I/O: via VT1211 / Almost the same as the idot mobo i am working on without much success
:(. Only the network controller is different.
How far did you get? Does anything initialize at all?
No. Absolutely nothing. If the it8705f 0637-gxs i/o controller were initialised i should have got something on the serial. But no luck whatsoever. Even flashrom does not work.
Does spd work on the epia / epia-m
Dunno. I've had some good results with coreboot + epia-m before (can't remember anything about spd).
Cheers Antoine
On Wed, Apr 23, 2008 at 04:22:10PM +0530, jtd wrote:
How far did you get? Does anything initialize at all?
No. Absolutely nothing. If the it8705f 0637-gxs i/o controller were
Which target do you use? Plain svn? Which svn revision? Do you modify the svn code or not? If yes, please post a patch so we can see what exactly you're executing..
Have you verified the serial port works fine with the vendor BIOS and a null-modem cable and another box, e.g. using minicom?
Even flashrom does not work.
That's a totally different and unrelated issue, though.
Uwe.
-
Antoine Martin -
jtd -
Uwe Hermann