Re:Re: rtl8139 NIC IRQ is 0 on m758lmr+ mainboard

Hi,ron

This is my config file.

Thanks.

riskin

# Sample config file for PCCHIPS m758lmr+ with DoC Millennium (as root)

# This will make a target directory of m758lmr+
target /opt/cwlinux/buildrom/m758lmr+

# PCCHIPS m758lmr+
mainboard pcchips/m758lmr+

# Enable Serial Console for debugging
option SERIAL_CONSOLE=1

# enable debugging support
option DEBUG=1

# enable serial post for debugging
option SERIAL_POST=1

# set default consol loglevel
option DEFAULT_CONSOLE_LOGLEVEL=9

# enable floppy support
# option MUST_ENABLE_FLOPPY

# enable keyboard support
# option NO_KEYBOARD

# use ELF boot
# option USE_ELF_BOOT=1

# enable RAM test
# option RAMTEST

# PIRQ tables
option HAVE_PIRQ_TABLE=1
# I8259 INITITIAL
option I8259=1
# don't use old kernel hack
option OLD_KERNEL_HACK=1

# Enable MicroCode update and L2 Cache init for PII and PIII
option UPDATE_MICROCODE=1
option CONFIGURE_L2_CACHE=1
option ENABLE_FIXED_AND_VARIABLE_MTRRS=1

# Use the internal VGA frame buffer device
#option HAVE_FRAMEBUFFER=1

# Path to your kernel (vmlinux)
linux /opt/cwlinux/linux

option DISABLE_INTERNAL_DEVICES=0
option CONFIG_COMPRESS=0

#support  loading initrd 
option LOAD_INITRD_FROM_MIL=1

# Kernel command line parameters
# enable serial console
commandline auto BOOT_IMAGE=Image root=100 ramdisk=26000 console=ttyS0,115200 console=tty0  BOOTSTEP=0 BOOTDEVICE=fla1
#commandline root=/dev/ram0 ramdisk=14000 init=/linuxrc console=ttyS0,115200 console=tty0 
#commandline root=/dev/nftla1 console=ttyS0,115200 console=tty0 video=sisfb:640x480-8@60,font:VGA8x16
# disable serial console
#commandline root=/dev/nftla1 console=/dev/tty5 CONSOLE=/dev/tty5 video=sisfb:640x480-8@60,font:VGA8x16

docipl northsouthbridge/sis/630/ipl.S
#option USE_DOC_2000_TSOP=1
option USE_DOC_MIL=1