Hi,
I havew some doubts on what you mentioned regarding the flow.
...It is added inline.
Regards,
Viswesh
On Wed, Mar 26, 2008 at 11:47:56PM -0700, Viswesh S wrote:
But why are you doing this anyway? Wouldn't it be easier to just look at the source code?
[Viswesh] The source code doesnt give you the functional flow.
It does, but the source code flow is not obvious in v2.
Taking one example, if we look at entry32.inc, we cant see that the next function is fpu_start.
No, but mainboard/*/*/Config.lb is also part of the source code. Think of it as a macro file that is processed to generate code.
Following mainboardinit entry32.inc there is mainboardinit cpu_reset.inc and then mainboardinit fpu_enable.inc.
Again, this design is in no way optimal and big improvements have been made in the new version 3 of coreboot. :)
[Viswesh] If we look at the disassembled code, the flow according to me is that,
from the reset_vector --> _start --> _protected_start --> _fpu_start.
And I dont understand the usage of the config.lb in the build.
Can somebody explain it.
//************** Config.lb for qemu-x86***********************
## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## ## Build our reset vector (This is where coreboot is entered) ## mainboardinit cpu/x86/16bit/reset16.inc ldscript /cpu/x86/16bit/reset16.lds ### Should this be in the northbridge code? mainboardinit arch/i386/lib/cpu_reset.inc ## ## Include an id string (For safe flashing) ## mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### ### O.k. We aren't just an intermediary anymore! ### ## ## Setup RAM ## mainboardinit cpu/x86/fpu/enable_fpu.inc mainboardinit ./auto.inc
***************************** ********************************* Also anybody has Top2005 Sw for linux ?
Regards,
Viswesh
If we dump the elf file we can actually see the next function which is being called, one of the reasons why I looked at the assembly code.
I like to understand the assembly code also, but right now the utmost priority is to understand the functional flow.
I understand. But look into Config.lb, or even ask on this list, I think you will get faster results. :)
Suppose you modify the linux bios, using linux how do u flash it to the chip ?
Do you have in system code for it (or) any tool which does it for you.
There is a tool called flashrom in util/flashrom/. Remember to erase before writing to flash when using it.
Is it better that I write code to write the coreboot to the bios chip.
The flashrom tool already supports a number of flash chips and chipsets, but if your hardware is unsupported or not working properly and you add code to make it work, please send a signed-off patch to the list. (See the Coding guidelines in the wiki.)
//Peter
------------------------------
_______________________________________________ coreboot mailing list coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
End of coreboot Digest, Vol 37, Issue 177 *****************************************
____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
-
Viswesh S