"Cary Jardin" cary@xprime.com writes:
Eric,
I saw your threads on LinuxBIOS and I hope you don't mind me asking a question.
I am running into a problem with the E7500 remapping of PCI space above system space.
It only remaps memory not pci space.
Optimally, I would like it to map below for my specific application. Unfortunately I am using an AMI bios that I can't just crack open and look at.
From you experience, can this be done on the E7500?
It does not sound correct: The docs for this part of the chipset are available at developer.intel.com
Eric
Greetings,
To the best of my knowledge, the 7500 will always map RAM, then PCI, then APICs and flash, finally, any RAM that wouldn't fit below the PCI hardware maps will go above 4GB and be accessable through PAE mode only.
G'day, sjames
On 10 Mar 2003, Eric W. Biederman wrote:
"Cary Jardin" cary@xprime.com writes:
Eric,
I saw your threads on LinuxBIOS and I hope you don't mind me asking a question.
I am running into a problem with the E7500 remapping of PCI space above system space.
It only remaps memory not pci space.
Optimally, I would like it to map below for my specific application. Unfortunately I am using an AMI bios that I can't just crack open and look at.
From you experience, can this be done on the E7500?
It does not sound correct: The docs for this part of the chipset are available at developer.intel.com
Eric
Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios