[LinuxBIOS] r2474 - trunk/LinuxBIOSv2/util/abuild

Author: stepan
Date: 2006-10-25 21:02:34 +0200 (Wed, 25 Oct 2006)
New Revision: 2474

Modified:
   trunk/LinuxBIOSv2/util/abuild/abuild
   trunk/LinuxBIOSv2/util/abuild/abuild.1
Log:
support submitting tests to the test system in abuild. initial support.
Signed-off-by: Stefan Reinauer 
Closes #3

Modified: trunk/LinuxBIOSv2/util/abuild/abuild
===================================================================
--- trunk/LinuxBIOSv2/util/abuild/abuild	2006-10-24 23:08:10 UTC (rev 2473)
+++ trunk/LinuxBIOSv2/util/abuild/abuild	2006-10-25 19:02:34 UTC (rev 2474)
@@ -14,6 +14,9 @@

#set -x # Turn echo on....

+ABUILD_DATE="October 24, 2006"
+ABUILD_VERSION="0.4"
+
 # Where shall we place all the build trees?
 TARGET=$( pwd )/linuxbios-builds
 XMLFILE=$( pwd )/abuild.xml
@@ -24,6 +27,8 @@
 # Lines of error context to be printed in FAILURE case
 CONTEXT=5

+TESTSUBMISSION="http://qa.linuxbios.org/deployment/send.php"
+
 # One might want to adjust these in case of cross compiling
 MAKE="make"
 PYTHON=python
@@ -35,19 +40,34 @@
    -e s/arm.*/arm/ -e s/sa110/arm/ -e s/x86_64/amd64/ \
    -e "s/Power Macintosh/ppc/"`

+trap interrupt INT
+
+function interrupt
+{
+	printf "\n$0: execution interrupted manually.\n"
+	if [ "$mode" == "xml" ]; then
+		printf "$0: deleting incomplete xml output file.\n"
+	fi
+	exit 1
+}
+
 function debug
 {
-	test "$verbose" == "true" && echo $*
+	test "$verbose" == "true" && printf "$*\n"
 }

function xml
 {
-	test "$mode" == "xml" && echo "$*" >> $XMLFILE
+	test "$mode" == "xml" && printf "$*\n" >> $XMLFILE
 }

function xmlfile
 {
-	test "$mode" == "xml" && { echo '<![CDATA['; cat $1; echo ']]>'; } >> $XMLFILE
+	test "$mode" == "xml" && { 
+		printf '<![CDATA[\n'
+		cat $1
+		printf ']]>\n' 
+	} >> $XMLFILE
 }

@@ -88,18 +108,18 @@

if [ -x $payloads/payload.sh ]; then
    	PAYLOAD=`$payloads/payload.sh $VENDOR $MAINBOARD`
-		echo "Using custom payload $PAYLOAD"
+		printf "Using custom payload $PAYLOAD\n"
    fi
    
    mkdir -p $TARGET

if [ -f $TARGCONFIG ]; then
         	cp $TARGCONFIG $TARGET/Config-${VENDOR}_${MAINBOARD}.lb
-		echo -n "Using existing test target $TARGCONFIG"
+		printf "Using existing test target $TARGCONFIG"
    	xml "  <config>$TARGCONFIG</config>"
    else

-		echo -n "  Creating config file..."
+		printf "  Creating config file..."
    	xml "  <config>autogenerated</config>"
    	( cat << EOF
 # This will make a target directory of ./VENDOR_MAINBOARD
@@ -149,7 +169,7 @@
    	-e s,CROSS_HOSTCC,"$HOSTCC",g \
    	$TARGET/Config-${VENDOR}_${MAINBOARD}.lb
    	
-	echo " ok"
+	printf " ok\n"
 }

function create_builddir
@@ -157,7 +177,7 @@
    VENDOR=$1
    MAINBOARD=$2
    
-	echo -n "  Creating builddir..."
+	printf "  Creating builddir..."

target_dir=$TARGET
    config_dir=$LBROOT/util/newconfig
@@ -182,12 +202,12 @@
    export PYTHONPATH=$config_dir
    $PYTHON $config_py $config_lb $LBROOT &> $build_dir/config.log
    if [ $? -eq 0 ]; then
-		echo "ok"
+		printf "ok\n"
    	xml "  <builddir>ok</builddir>"
    	xml ""
    	return 0
    else
-		echo "FAILED! Log excerpt:"
+		printf "FAILED! Log excerpt:\n"
    	xml "  <builddir>failed</builddir>"
    	xml "  <log>"
    	xmlfile $build_dir/config.log
@@ -211,7 +231,7 @@
    VENDOR=$1
    MAINBOARD=$2

-	echo -n "  Compiling image .."
+	printf "  Compiling image .."
    CURR=$( pwd )
    cd $TARGET/${VENDOR}_${MAINBOARD}
    stime=`date +%s`
@@ -222,8 +242,8 @@
    if [ $ret -eq 0 ]; then
    	xml "  <compile>ok</compile>"
    	xml "  <compiletime>${duration}s</compiletime>"
-		echo "ok" > compile.status
-		echo "ok. (took ${duration}s)"
+		printf "ok\n" > compile.status
+		printf "ok. (took ${duration}s)\n"
    	cd $CURR
    	return 0
    else
@@ -233,7 +253,7 @@
    	xmlfile make.log
    	xml "  </log>"

-		echo "FAILED after ${duration}s! Log excerpt:"
+		printf "FAILED after ${duration}s! Log excerpt:\n"
    	tail -n $CONTEXT make.log
    	cd $CURR
    	return 1
@@ -273,7 +293,7 @@
    HOSTCC='gcc'
    CROSS_COMPILE=''

-	echo -n "Processing mainboard/$VENDOR/$MAINBOARD"
+	printf "Processing mainboard/$VENDOR/$MAINBOARD"

xml "<mainboard>"
    xml ""
@@ -287,7 +307,7 @@
    	source $LBROOT/src/mainboard/${VENDOR}/${MAINBOARD}/abuild.info
    
    if [ "$ARCH" == "$TARCH" ]; then
-		echo " ($TARCH: ok)"
+		printf " ($TARCH: ok)\n"
    else
    	found_crosscompiler=false
    	if [ "$ARCH" == amd64 -a "$TARCH" == i386 ]; then
@@ -314,15 +334,14 @@
    	
    	# Check result:
    	if [ $found_crosscompiler == "false" ]; then
-			echo " ($TARCH: skipped, we're $ARCH)"
-			echo
+			printf " ($TARCH: skipped, we're $ARCH)\n\n"
    		xml "  <status>notbuilt</status>"
    		xml ""
    		xml "</mainboard>"
    	
    		return 0
    	else
-			echo " ($TARCH: ok, we're $ARCH)"
+			printf " ($TARCH: ok, we're $ARCH)\n"
    		xml "  <compiler>"
    		xml "    <path>`which ${CROSS_COMPILE}gcc`</path>"
    		xml "    <version>`${CROSS_COMPILE}gcc --version | head -1`</version>"
@@ -333,8 +352,7 @@

built_successfully $VENDOR $MAINBOARD && \
    {
-		echo " ( mainboard/$VENDOR/$MAINBOARD previously ok )"
-		echo
+		printf " ( mainboard/$VENDOR/$MAINBOARD previously ok )\n\n"
    	xml "  <status>previouslyok</status>"
    	xml ""
    	xml "</mainboard>"
@@ -343,8 +361,7 @@

build_broken $VENDOR $MAINBOARD || \
    {
-		echo " ( broken mainboard/$VENDOR/$MAINBOARD skipped )"
-		echo
+		printf " ( broken mainboard/$VENDOR/$MAINBOARD skipped )\n\n"
    	xml "  <status>knownbroken</status>"
    	xml ""
    	xml "</mainboard>"
@@ -354,51 +371,88 @@
    create_buildenv $VENDOR $MAINBOARD
    if [ $? -eq 0 ]; then
    	compile_target $VENDOR $MAINBOARD && 
-			xml "<status>ok</status>" ||
+			xml "  <status>ok</status>" ||
    		xml "<status>broken</status>"
    fi

xml ""
    xml "</mainboard>"

-	echo
+	printf "\n"
 }

+function test_target
+{
+	VENDOR=$1
+	MAINBOARD=$2
+
+	if [ "$hwtest" != "true" ]; then
+		return 0
+	fi
+
+	# image does not exist. we silently skip the patch.
+	if [ ! -r "$TARGET/${VENDOR}_${MAINBOARD}/linuxbios.rom" ]; then
+		return 0
+	fi
+
+	which curl &> /dev/null
+	if [ $? != 0 ]; then
+		printf "curl is not installed but required for test submission.  skipping test.\n\n"
+		return 0
+	fi
+
+	CURR=`pwd`
+	if [ -r "$TARGET/${VENDOR}_${MAINBOARD}/tested" ]; then
+		printf "Testing image for board $VENDOR $MAINBOARD skipped (previously submitted).\n\n"
+		return 0
+	fi
+	# touch $TARGET/${VENDOR}_${MAINBOARD}/tested
+
+	printf "Submitting image for board $VENDOR $MAINBOARD to test system...\n"
+
+	curl -f -F "romfile=@$TARGET/${VENDOR}_${MAINBOARD}/linuxbios.rom" \
+		-F "mode=abuild" -F "mainboard=${VENDOR}_${MAINBOARD}" -F "submit=Upload" \
+        	"http://qa.linuxbios.org/deployment/send.php"
+
+	printf "\n"
+	return 0
+}
+
 function myhelp
 {
-	echo "Usage: $0 [-v] [-a] [-b] [-t <vendor/board>] [-p <dir>] [lbroot]"
-	echo "       $0 [-V|--version]"
-	echo "       $0 [-h|--help]"
-	echo
-	echo "Options:"
-	echo "    [-v|--verbose]		  print more messages"
-	echo "    [-a|--all]			  build previously succeeded ports as well"
-	echo "    [-b|--broken]		  attempt to build ports that are known broken"
-	echo "    [-t|--target <vendor/board>]  attempt to build target vendor/board only"
-	echo "    [-p|--payloads <dir>]         use payloads in <dir> to build images"
-	echo "    [-V|--version]		  print version number and exit"
-	echo "    [-h|--help]			  print this help and exit"
-	echo "    [-x|--xml]			  write xml log file "
-	echo "                                  (defaults to $XMLFILE)"
-	echo "    [lbroot]			  absolute path to LinuxBIOS sources"
-	echo "				  (defaults to $LBROOT)"
-	echo
+	printf "Usage: $0 [-v] [-a] [-b] [-t <vendor/board>] [-p <dir>] [lbroot]\n"
+	printf "       $0 [-V|--version]\n"
+	printf "       $0 [-h|--help]\n"
+	printf
+	printf "Options:\n"
+	printf "    [-v|--verbose]		  print more messages\n"
+	printf "    [-a|--all]			  build previously succeeded ports as well\n"
+	printf "    [-b|--broken]		  attempt to build ports that are known broken\n"
+	printf "    [-t|--target <vendor/board>]  attempt to build target vendor/board only\n"
+	printf "    [-p|--payloads <dir>]         use payloads in <dir> to build images\n"
+	printf "    [-V|--version]		  print version number and exit\n"
+	printf "    [-h|--help]			  print this help and exit\n"
+	printf "    [-x|--xml]			  write xml log file \n"
+	printf "                                  (defaults to $XMLFILE)\n"
+	printf "    [-T|--test]			  submit image(s) to automated test system\n"
+	printf "    [lbroot]			  absolute path to LinuxBIOS sources\n"
+	printf "				  (defaults to $LBROOT)\n\n"
 }

function myversion 
 {
    cat << EOF

-LinuxBIOS autobuild: V0.3.
+LinuxBIOS autobuild v$ABUILD_VERSION ($ABUILD_DATE)

Copyright (C) 2004 by Stefan Reinauer 
 Copyright (C) 2006 by coresystems GmbH 
+
 This program is free software; you may redistribute it under the terms
 of the GNU General Public License. This program has absolutely no
 warranty.

EOF
-	myhelp
 }

# default options
@@ -408,7 +462,7 @@
 verbose=false

# parse parameters
-args=`getopt -l version,verbose,help,all,target:,broken,payloads: Vvhat:bp: -- "$@"`
+args=`getopt -l version,verbose,help,all,target:,broken,payloads:,test Vvhat:bp:T -- "$@"`

if [ $? != 0 ]; then
    myhelp
@@ -424,10 +478,11 @@
    	-b|--broken)	shift; buildbroken=true;;
    	-v|--verbose)	shift; verbose=true;;
    	-V|--version)	shift; myversion; exit 0;;
-		-h|--help)	shift; myhelp; exit 0;;
+		-h|--help)	shift; myversion; myhelp; exit 0;;
    	-p|--payloads)  shift; payloads="$1"; shift;;
+		-T|--test)      shift; hwtest=true;;
    	--)		shift; break;;
-		-*)		echo -e "Invalid option\n"; myhelp; exit 1;;
+		-*)		printf "Invalid option\n\n"; myhelp; exit 1;;
    	*)		break;;
    esac
 done
@@ -442,14 +497,16 @@

if [ "$target" != "" ]; then
    # build a single board
-	VENDOR=`echo $target|cut -f1 -d/`
-	MAINBOARD=`echo $target|cut -f2 -d/`
+	VENDOR=`printf $target|cut -f1 -d/`
+	MAINBOARD=`printf $target|cut -f2 -d/`
    build_target $VENDOR $MAINBOARD
+	test_target $VENDOR $MAINBOARD
 else
    # build all boards per default
    for VENDOR in $( vendors ); do
    	for MAINBOARD in $( mainboards $VENDOR ); do
    		build_target $VENDOR $MAINBOARD
+			test_target $VENDOR $MAINBOARD
    	done
    done
 fi

Modified: trunk/LinuxBIOSv2/util/abuild/abuild.1
===================================================================
--- trunk/LinuxBIOSv2/util/abuild/abuild.1	2006-10-24 23:08:10 UTC (rev 2473)
+++ trunk/LinuxBIOSv2/util/abuild/abuild.1	2006-10-25 19:02:34 UTC (rev 2474)
@@ -1,4 +1,4 @@
-.TH ABUILD 1 "September 19, 2006"
+.TH ABUILD 1 "October 24, 2006"
 .SH NAME
 abuild - build LinuxBIOS images for all available targets
 .SH SYNOPSIS
@@ -41,6 +41,11 @@
 .B abuild.xml
 and will be created in the current directory.
 .TP
+.B "-T, --test"
+Submit generated image(s) to the automated test system.
+The results of the tests will be made available at 
+.B http://qa.linuxbios.org/log_manual.php
+.TP
 .B "-v, --verbose"
 More verbose output.
 .TP
@@ -62,7 +67,7 @@
 .br
 2006 coresystems GmbH
 .SH AUTHORS
-Stefan Reinauer 
+Stefan Reinauer 
 .PP
 This manual page was written by Uwe Hermann .
 It is licensed under the terms of the GNU GPL (v2 or later).