Re: [coreboot] Bring up Intel Camelback Mountain Board with coreboot+FSP failed

[Yang, York]

The CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_HEADER need to be set in order to find the microcode from cbfs.

Thanks,
York

From: coreboot [mailto:[e-mail]] On Behalf Of Zoran Stojsavljevic
Sent: Monday, July 04, 2016 2:33 PM
To: Zeh, Werner 
Cc: 詹皓鈞 ; [e-mail]
Subject: Re: [coreboot] Bring up Intel Camelback Mountain Board with coreboot+FSP failed

Hello Werner,

Could be that you are correct. I know that INTEL PED team themselves up-streamed the whole BDW-DE Coreboot code into Coreboot. Here is the pointer proving that: https://www.coreboot.org/pipermail/coreboot-gerrit/2016-April/042490.html

+config CPU_MICROCODE_HEADER_FILES

+       string

+       default "../intel/cpu/broadwell_de/microcode/M1050663_07000001.h ../intel/cpu/broadwell_de/microcode/M1050662_0000000A.h ../intel/cpu/broadwell_de/microcode/MFF50661_F1000008.h"

The same I found in Jim's Coreboot config files:

# CONFIG_BUILD_WITH_FAKE_IFD is not set

CONFIG_TTYS0_BASE=0x3f8

CONFIG_CPU_MICROCODE_HEADER_FILES="../intel/cpu/broadwell_de/microcode/M1050663_07000001.h

../intel/cpu/broadwell_de/microcode/M1050662_0000000A.h

../intel/cpu/broadwell_de/microcode/MFF50661_F1000008.h"

CONFIG_FSP_LOC=0xffeb0000

CONFIG_SOC_INTEL_FSP_BROADWELL_DE=y

York (Yang) is the one who can precisely answer on these questions. and maybe provide the latest MCUs, or at least these could be used for googlthe more recent BDX-DE MCUs.

Also, BDX-DE CPUID is important (I think for CPUIDs 0x50661, 0x50662, 0x50663 and assuming also 0x50664), so for different CPUIDs different MCU updates should be used (not 100% sure, thought).

Best Regards,

Zoran

On Mon, Jul 4, 2016 at 12:39 PM, Zeh, Werner <[e-mail]> wrote:
Hi Jim.

According to  the Postcode it seems like you have no valid microcode for the used CPU.
In src/drivers/intel/fsp1_0/cache_as_ram.inc is the code which ends up in the endless loop while this code is shown.

Check which CPU you really use on your mainboard and add the right microcode to you configuration.
This should solve your issue.

Werner

Von: coreboot [mailto:[e-mail]] Im Auftrag von ???
Gesendet: Freitag, 1. Juli 2016 05:46
An: [e-mail]
Betreff: [coreboot] Bring up Intel Camelback Mountain Board with coreboot+FSP failed

Dear Sir,

I just clone the latest coreboot source code from GIThttp://review.coreboot.org/p/coreboot and FSP from Intel FSP websitehttps://downloadcenter.intel.com/download/25701.
Using " make crossgcc-i386 CPU=4 " to setup the compilation environment.
But the Camelback Mountain board could not bring up successfully,
it always hang with POST CODE = 0xCE.
From the Intel FSP spec 1.0, it seems that system halt before loading FSP.
Attached is my .config file, is there anyone hit the fail symptoms same as me and any idea to solve it?

Thanks a lot,
Jim