[LinuxBIOS] [PATCH] v3: switch pci_ops_mmconf from uint*_t to u*

[Carl-Daniel Hailfinger]

This switches the only remaining non-userspace code from uint*_t to u*.

Signed-off-by: Carl-Daniel Hailfinger

--- LinuxBIOSv3/arch/x86/pci_ops_mmconf.c	(Revision 485)
+++ LinuxBIOSv3/arch/x86/pci_ops_mmconf.c	(Arbeitskopie)
@@ -18,32 +18,32 @@

#include <mmio_conf.h>

-static uint8_t pci_mmconf_read_config8(struct bus *pbus, int bus, int devfn, int where)
+static u8 pci_mmconf_read_config8(struct bus *pbus, int bus, int devfn, int where)
 {
    	return (read8x(PCI_MMIO_ADDR(bus, devfn, where)));
 }

-static uint16_t pci_mmconf_read_config16(struct bus *pbus, int bus, int devfn, int where)
+static u16 pci_mmconf_read_config16(struct bus *pbus, int bus, int devfn, int where)
 {
                 return (read16x(PCI_MMIO_ADDR(bus, devfn, where)));
 }

-static uint32_t pci_mmconf_read_config32(struct bus *pbus, int bus, int devfn, int where)
+static u32 pci_mmconf_read_config32(struct bus *pbus, int bus, int devfn, int where)
 {
                 return (read32x(PCI_MMIO_ADDR(bus, devfn, where)));
 }

-static void  pci_mmconf_write_config8(struct bus *pbus, int bus, int devfn, int where, uint8_t value)
+static void  pci_mmconf_write_config8(struct bus *pbus, int bus, int devfn, int where, u8 value)
 {
                 write8x(PCI_MMIO_ADDR(bus, devfn, where), value);
 }

-static void pci_mmconf_write_config16(struct bus *pbus, int bus, int devfn, int where, uint16_t value)
+static void pci_mmconf_write_config16(struct bus *pbus, int bus, int devfn, int where, u16 value)
 {
                 write8x(PCI_MMIO_ADDR(bus, devfn, where), value);
 }

-static void pci_mmconf_write_config32(struct bus *pbus, int bus, int devfn, int where, uint32_t value)
+static void pci_mmconf_write_config32(struct bus *pbus, int bus, int devfn, int where, u32 value)
 {
                 write8x(PCI_MMIO_ADDR(bus, devfn, where), value);
 }

[LinuxBIOS] [PATCH] v3: switch pci_ops_mmconf from uint*_t to u*

[Uwe Hermann]

On Thu, Aug 30, 2007 at 02:16:21AM +0200, Carl-Daniel Hailfinger wrote:
> This switches the only remaining non-userspace code from uint*_t to u*.
>
> Signed-off-by: Carl-Daniel Hailfinger

Thanks, r486.

Uwe.