IO conflict in 440bx V1

[Richard Smith]

I just remembered.. During my e-mail blackout I discovered that the
440bx code sets up the smbus base address at 0x1000.  Which is also
the IO address that the PCI code starts allocating from.

Causes all manner of subtle problems.

I changed my version to allocate smb at 0x500 but the right solution
may be to reserve a range for chipset IO that the PCI allocator will
not use.

[Ronald G. Minnich]

On Thu, 13 Jan 2005, Richard Smith wrote:
> I changed my version to allocate smb at 0x500 but the right solution
> may be to reserve a range for chipset IO that the PCI allocator will
> not use.

This is pretty much fixed for V2. I doubt we're going to go back to V1 and 
do much for it.

ron