Re: [LinuxBIOS] Tyan S2895 Mptable

[Ken Fuchs]

> On 6/9/05, [e-mail]  wrote:
> > The Tyan/s2895 mptable.c is missing two entries for SATA. If the 
> > Config.lb file turns the SATA devices on the second CK804, this
> > could be a problem.  Ethernet is the only device in the mptable
> > for the second CK804.

Yh Lu wrote:
> the sata in second CK804 is disabled in MB Config.lb, So don't need
> that.

I think that Stephen has already clearly indicated that there is no
problem when SATA for the second CK8-04 is disabled.

Does the Tyan S2885 hardware (with COTS BIOS) support SATA on the
second CK8-04?  If so, the mptable should have the entries required to
support SATA on the second CK8-04.

Sincerely,

Ken Fuchs

[LinuxBIOS] Tyan S2895 Mptable

[yhlu]

No connector for that.

YH

On 6/9/05, Ken Fuchs  wrote:
> > On 6/9/05, [e-mail]  wrote:
> > > The Tyan/s2895 mptable.c is missing two entries for SATA. If the
> > > Config.lb file turns the SATA devices on the second CK804, this
> > > could be a problem.  Ethernet is the only device in the mptable
> > > for the second CK804.
>
> Yh Lu wrote:
> > the sata in second CK804 is disabled in MB Config.lb, So don't need
> > that.
>
> I think that Stephen has already clearly indicated that there is no
> problem when SATA for the second CK8-04 is disabled.
>
> Does the Tyan S2885 hardware (with COTS BIOS) support SATA on the
> second CK8-04?  If so, the mptable should have the entries required to
> support SATA on the second CK8-04.
>
> Sincerely,
>
> Ken Fuchs
>
> LinuxBIOS mailing list
> [e-mail]
> http://www.openbios.org/mailman/listinfo/linuxbios