Dear LinuxBIOS readers!
This is the automated build check service of LinuxBIOS.
The developer "uwe" checked in revision 2958 to the LinuxBIOS source repository and caused the following changes:
Change Log: Fine-tune the V-link bus between K8T890 and VT8237R and set it to 8X transfer rate (up to 1066 MB/s) similar code placed here would be needed for VT8237A/S etc. Using VIA recommended values despite they are for K8T890CF, this is K8T890CE (still dont know what is exactly different).
This patch enables the parity error reporting on V-Link, so it enables NMI generation for the SERR# errors. The NMI may not be generated, maybe port 61h needs some tuning too.
Signed-off-by: Rudolf Marek r.marek@assembler.cz Acked-by: Uwe Hermann uwe@hermann-uwe.de
Build Log: Compilation of agami:aruma is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2958&device=aruma&... Compilation of amd:serengeti_cheetah is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2958&device=serengeti_... Compilation of asus:a8v-e_se is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2958&device=a8v-e_se&a... Compilation of iwill:dk8_htx is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2958&device=dk8_htx&am...
If something broke during this checkin please be a pain in uwe's neck until the issue is fixed.
If this issue is not fixed within 24h the revision should be backed out.
Best regards, LinuxBIOS automatic build system