Author: rminnich Date: 2006-09-21 22:55:58 +0200 (Thu, 21 Sep 2006) New Revision: 2432
Modified: trunk/LinuxBIOSv2/src/mainboard/olpc/rev_a/Config.lb Log: add irq for keyboard and mouse
Modified: trunk/LinuxBIOSv2/src/mainboard/olpc/rev_a/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/olpc/rev_a/Config.lb 2006-09-21 13:09:22 UTC (rev 2431) +++ trunk/LinuxBIOSv2/src/mainboard/olpc/rev_a/Config.lb 2006-09-21 20:55:58 UTC (rev 2432) @@ -135,7 +135,18 @@ device pci 1.0 on end device pci 1.1 on end chip southbridge/amd/cs5536 - register "enable_gpio0_inta" = "1" + # 0x51400025 (IRQ Mapper LPC Mask)= 0x00001002 + # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK + # 0x5140004E (LPC Serial IRQ Control) = 0xEFFD0080. + # Frame Pulse Width = 4clocks + # IRQ Data Frames = 17Frames + # SIRQ Mode = continous , It would be better if the EC could operate in + # Active(Quiet) mode. Save power.... + # SIRQ Enable = Enabled + # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK + register "lpc_irq" = "0x00001002" + register "lpc_serirq_enable" = "0xEFFD0080" + register "enable_gpio0_inta" = "1" register "enable_ide_nand_flash" = "1" register "enable_uarta" = "1" register "enable_USBP4_host" = "1"