[LinuxBIOS] W83267HF Keyboard Setup

[Otávio Alcântara]

Hello to all,

I'm trying to port linuxbios to a AMD RDK UVC similar board, using
the norwich board code. I've just got to boot the board, but the keyboard
doesn't work. My board uses an extension I/O board based on WINBOND W83627HF
connected to LPC bus, I've already setup the superio serial.
         I've tried to include in cache_as_ram_auto.c the superio.c (from
w83627hf directory), and use the w83627_init() routine, but there are some
compilations problems.
         How can I set up the PC keyboard in linuxbios, using the W83267HF
chipset?

Regards,

Otávio Alcântara
"I'll never cross to the Dark Side."

[Marc Jones]

Otávio Alcântara wrote:
> Hello to all,
>      I'm trying to port linuxbios to a AMD RDK UVC similar board, 
>
> using the norwich board code. I've just got to boot the board, but the 
> keyboard doesn't work. My board uses an extension I/O board based on 
> WINBOND W83627HF connected to LPC bus, I've already setup the superio 
> serial.
>          I've tried to include in cache_as_ram_auto.c the superio.c 
> (from w83627hf directory), and use the w83627_init() routine, but there 
> are some compilations problems.
>          How can I set up the PC keyboard in linuxbios, using the 
> W83267HF chipset?
>
> Regards,
>
> Otávio Alcântara
> "I'll never cross to the Dark Side."

Otavio,

The amd\db800 is the platform you want to base your changes on. It does 
the W83627HF setup and the keyboard should just work.

Marc