Hi I have a board of P3 low power processor with 815E chipset. Can I port linuxbios to it - regards -samp
On Thu, 13 Mar 2003, samp wrote:
Hi I have a board of P3 low power processor with 815E chipset. Can I port linuxbios to it
sure. It's a bit of work but doable.
what's the board?
ron
I am deisnging a embedded board with p3 low power processor with 815E chipset. and winbond super I/O. First time I am going to port BIOS to it. Not a branded board. - regards - samp
Ronald G. Minnich wrote:
On Thu, 13 Mar 2003, samp wrote:
Hi I have a board of P3 low power processor with 815E chipset. Can I port linuxbios to it
sure. It's a bit of work but doable.
what's the board?
ron
Hello!
I have compiled the linuxbios for my pcchips 787cl+, it works fine but i have problems with the serial console. The output works, but input is broken. :( I can see the linux 'login: ' prompt, but I can't input anything. If I boot the same kernel with the same parameters but with the original motherboard's BIOS, I do not have any problems with the serial console. What should I do to fix my problem?
Another problem I have here is that 'reboot' doesn't work. It just hangs. I had to use acpi_reset instead, but I don't think that's a proper way to go.
Speaking of acpi_reset... there are some words in the source code about the ACPI watchdog timer. What's that? Can that thing be used as a system watchdog to reboot it when it hangs?
Best regards, Spirit mailto:spirit@reactor.ru