New patch to review for coreboot: e108b6d fix superiotool for NCT6776F

[Florian Zumbiehl]

Florian Zumbiehl just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/391

-gerrit

commit e108b6d924cffe8634faffb599f2309039dbcb28
Author: Florian Zumbiehl 
Date:   Wed Nov 2 09:46:34 2011 +0100

fix superiotool for NCT6776F

The current code exits config mode of the NCT6776F immediately after
    detection, so the register dump shows all 0xffs. This patch adds code to
    re-enter config mode for the register dump so that the register contents
    can be read.

Change-Id: I4ad0c108b6411a665e31f55dea4b91ca77d1a5f7
    Signed-off-by: Florian Zumbiehl 
---
 util/superiotool/nuvoton.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/util/superiotool/nuvoton.c b/util/superiotool/nuvoton.c
index 6a1a75c..ed2eabc 100644
--- a/util/superiotool/nuvoton.c
+++ b/util/superiotool/nuvoton.c
@@ -255,7 +255,9 @@ void probe_idregs_nuvoton(uint16_t port)
    	printf("Found Nuvoton %s (id=0x%02x) at 0x%x\n",
    	       get_superio_name(reg_table, chip_id), chip_id, port);
    	chip_found = 1;
+		enter_conf_mode_winbond_fintek_ite_8787(port);
    	dump_superio("Nuvoton", reg_table, port, chip_id, LDN_SEL);
+		exit_conf_mode_winbond_fintek_ite_8787(port);
    	return;
    }