Re: [coreboot] CoffeeLake RVP11: Post code 0x7A "SELF Payload doesn't target RAM:

[Lance Zhao]

The "Invalid FSPM signature" at this stage, if FspUpd.h for coffeelake
already there. maybe "XIP mode" had not been selected in config file?

On Tue, Oct 30, 2018 at 10:42 PM Jose Trujillo 
wrote:
> Thank you Lance;
>
> I got back to 4.8.1 because on master of 2 weeks ago I was getting post
> code 0x34 "Invalid FSPM signature"; but I will try again.
> Coreboot engineers have been doing much work on integrating FSP to
> coreboot and may be the reason has been unstable.
>
> Jose.
>
> ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> On Wednesday, October 31, 2018 4:08 AM, Lance Zhao 
> wrote:
>
> Feels like CoffeeLake RVP11 still been actively uploaded with newer
> changes. But at least your coreboot code seems to be outdated, all of those
> coffeelake-h related ID(CPUID and MCH/PCHID) had been up-streamed recently.
> I will suggest you to sync up your code base and try again.
>
> Lance
>
> On Tue, Oct 30, 2018 at 7:10 AM Jose Trujillo via coreboot <
> [e-mail]> wrote:
> > Hello coreboot engineers:
> >
> > I am using the "coffeelake RVP11" to test the code on my "non RVP" system.
> > The payload doesn't load.
> >
> > I found several errors in the attached log:
> >
> > 1.- Device ID's of the system are still not existant in coreboot.
> > 2.- Misconfigured # of MAX CPU CORES.
> > 3.- Maybe memory is still not properly initialized because RVP platform
> > uses LPDDR4 and use SPD.bin VS my system that use DDR4 SO-UDIMM on SMB SPD
> > channel.
> >
> > Please help me to identify the root of the problem that causes RAM
> > "Failed Segment"....
> > Thank you in advance.
> > Jose Trujillo.
> > --
> > coreboot mailing list: [e-mail]
> > https://mail.coreboot.org/mailman/listinfo/coreboot