Hello Stefan, As far as I know autoport only supports sandybridge and Ivybridge compatible boards. You are welcome to add support for ibexpeak. You are right it shouldn't segfault or lockup.
Kind Regards, Patrick Originalnachricht Von: Stefan Tauner Gesendet: Donnerstag, 5. Mai 2016 00:15 An: coreboot@coreboot.org Antwort an: coreboot@coreboot.org Betreff: [coreboot] autoport segfault on ibexpeak
Hi,
since the rebase of the existing t410s patch to current master was non-trivial (for me anyway) so I gave autoport a shot without knowing that it currently does not support ibexpeak (5 series). This became quite obvious from the output... but that's not the main reason why I am writing (although I'd be interested regrading support for earlier chipsets to autoport) but...
1) autoport segfaults on the t410s with vendor bios and that should definitely be fixed IMHO. 2) about a dozen or so seconds after running autoport my laptop completely locks up. Any ideas why this might happen?
Stdio/err is log attached. FWIW autoport also wrote the following log files:
-rw-r--r-- 1 root root 329204 May 3 23:24 acpidump.log -rw-r--r-- 1 root root 9464 May 3 23:24 codec#0 -rw-r--r-- 1 root root 3598 May 3 23:24 codec#3 -rw-r--r-- 1 root root 3444 May 3 23:24 cpuinfo.log -rw-r--r-- 1 root root 15925 May 3 23:24 dmidecode.log -rw-r--r-- 1 root root 0 May 3 23:24 ectool.log -rw-r--r-- 1 root root 75 May 3 23:24 input_bustypes.log -rw-r--r-- 1 root root 825285 May 3 23:24 inteltool.log -rw-r--r-- 1 root root 1136 May 3 23:24 ioports.log -rw-r--r-- 1 root root 150333 May 3 23:24 lspci.log -rw-r--r-- 1 root root 160 May 3 23:24 pin_hwC0D0 -rw-r--r-- 1 root root 48 May 3 23:24 pin_hwC0D3
-
siro＠das-labor.org