Author: stuge Date: Mon Feb 14 21:02:47 2011 New Revision: 6360 URL: https://tracker.coreboot.org/trac/coreboot/changeset/6360
Log: Lenovo ThinkPad X60 / X60s Support
Adds support for Lenovo X60 series ThinkPads. So far, only X60s (Model 1703) has been tested.
It's a basic patch without SMI and ACPI, as this makes it easier to review. SMI and ACPI patches will follow.
Signed-off-by: Sven Schnelle svens@stackframe.org Acked-by: Peter Stuge peter@stuge.se
Added: trunk/src/mainboard/lenovo/ trunk/src/mainboard/lenovo/Kconfig trunk/src/mainboard/lenovo/x60/ - copied from r6357, trunk/src/mainboard/roda/rk886ex/ Modified: trunk/src/mainboard/Kconfig trunk/src/mainboard/lenovo/x60/Kconfig trunk/src/mainboard/lenovo/x60/chip.h trunk/src/mainboard/lenovo/x60/devicetree.cb trunk/src/mainboard/lenovo/x60/irq_tables.c trunk/src/mainboard/lenovo/x60/mainboard.c trunk/src/mainboard/lenovo/x60/mptable.c trunk/src/mainboard/lenovo/x60/romstage.c
Modified: trunk/src/mainboard/Kconfig ============================================================================== --- trunk/src/mainboard/Kconfig Mon Feb 14 20:26:22 2011 (r6359) +++ trunk/src/mainboard/Kconfig Mon Feb 14 21:02:47 2011 (r6360) @@ -68,6 +68,8 @@ bool "Kontron" config VENDOR_LANNER bool "Lanner" +config VENDOR_LENOVO + bool "Lenovo" config VENDOR_LIPPERT bool "Lippert" config VENDOR_MITAC @@ -147,6 +149,7 @@ source "src/mainboard/jetway/Kconfig" source "src/mainboard/kontron/Kconfig" source "src/mainboard/lanner/Kconfig" +source "src/mainboard/lenovo/Kconfig" source "src/mainboard/lippert/Kconfig" source "src/mainboard/mitac/Kconfig" source "src/mainboard/msi/Kconfig"
Added: trunk/src/mainboard/lenovo/Kconfig ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/src/mainboard/lenovo/Kconfig Mon Feb 14 21:02:47 2011 (r6360) @@ -0,0 +1,22 @@ +if VENDOR_LENOVO + +choice + prompt "Mainboard model" + +config BOARD_LENOVO_X60 + bool "ThinkPad X60 / X60s" + help + The following X60 series ThinkPad machines have been verified to + work correctly: + + ThinkPad X60s (Model 1703) + +endchoice + +source "src/mainboard/lenovo/x60/Kconfig" + +config MAINBOARD_VENDOR + string + default "Lenovo" + +endif # VENDOR_LENOVO
Modified: trunk/src/mainboard/lenovo/x60/Kconfig ============================================================================== --- trunk/src/mainboard/roda/rk886ex/Kconfig Mon Feb 14 20:24:37 2011 (r6357) +++ trunk/src/mainboard/lenovo/x60/Kconfig Mon Feb 14 21:02:47 2011 (r6360) @@ -1,4 +1,4 @@ -if BOARD_RODA_RK886EX +if BOARD_LENOVO_X60
config BOARD_SPECIFIC_OPTIONS # dummy def_bool y @@ -7,28 +7,35 @@ select CPU_INTEL_SOCKET_MFCPGA478 select NORTHBRIDGE_INTEL_I945GM select SOUTHBRIDGE_INTEL_I82801GX - select SOUTHBRIDGE_TI_PCI7420 - select SUPERIO_SMSC_LPC47N227 - select SUPERIO_RENESAS_M3885X + select SOUTHBRIDGE_RICOH_RL5C476 + select SUPERIO_NSC_PC87382 + select SUPERIO_NSC_PC87392 + select EC_LENOVO_PMH7 select EC_ACPI select BOARD_HAS_FADT select HAVE_OPTION_TABLE select HAVE_PIRQ_TABLE select HAVE_MP_TABLE select MMCONF_SUPPORT - select HAVE_SMI_HANDLER - select HAVE_ACPI_TABLES - select HAVE_ACPI_RESUME - select BOARD_ROMSIZE_KB_1024 + select GFXUMA + select BOARD_ROMSIZE_KB_2048 select CHANNEL_XOR_RANDOMIZATION
config MAINBOARD_DIR string - default roda/rk886ex + default lenovo/x60 + +config DCACHE_RAM_BASE + hex + default 0xffdf8000 + +config DCACHE_RAM_SIZE + hex + default 0x8000
config MAINBOARD_PART_NUMBER string - default "RK886EX" + default "ThinkPad X60 / X60s"
config MMCONF_BASE_ADDRESS hex @@ -40,18 +47,10 @@
config MAX_CPUS int - default 4 - -config MAX_PHYSICAL_CPUS - int default 2
-config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID - hex - default 0x6886 - -config MAXIMUM_SUPPORTED_FREQUENCY +config MAX_PHYSICAL_CPUS int - default 400 + default 1
-endif # BOARD_RODA_RK886EX +endif
Modified: trunk/src/mainboard/lenovo/x60/chip.h ============================================================================== --- trunk/src/mainboard/roda/rk886ex/chip.h Mon Feb 14 20:24:37 2011 (r6357) +++ trunk/src/mainboard/lenovo/x60/chip.h Mon Feb 14 21:02:47 2011 (r6360) @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by
Modified: trunk/src/mainboard/lenovo/x60/devicetree.cb ============================================================================== --- trunk/src/mainboard/roda/rk886ex/devicetree.cb Mon Feb 14 20:24:37 2011 (r6357) +++ trunk/src/mainboard/lenovo/x60/devicetree.cb Mon Feb 14 21:02:47 2011 (r6360) @@ -2,6 +2,7 @@ ## This file is part of the coreboot project. ## ## Copyright (C) 2007-2009 coresystems GmbH +## Copyright (C) 2011 Sven Schnelle svens@stackframe.org ## ## This program is free software; you can redistribute it and/or ## modify it under the terms of the GNU General Public License as @@ -29,18 +30,15 @@
device pci_domain 0 on device pci 00.0 on end # host bridge - # auto detection: - #device pci 01.0 off end # i945 PCIe root port - #device pci 02.0 on end # vga controller - #device pci 02.1 on end # display controller - + device pci 02.0 on end # vga controller + device pci 02.1 on end # display controller chip southbridge/intel/i82801gx register "pirqa_routing" = "0x0b" register "pirqb_routing" = "0x0b" register "pirqc_routing" = "0x0b" register "pirqd_routing" = "0x0b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" + register "pirqe_routing" = "0x0b" + register "pirqf_routing" = "0x0b" register "pirqg_routing" = "0x0b" register "pirqh_routing" = "0x0b"
@@ -48,72 +46,85 @@ # 0 No effect (default) # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) # 2 SCI (if corresponding GPIO_EN bit is also set) - register "gpi13_routing" = "2" - register "gpi8_routing" = "1" - register "gpi7_routing" = "2" - register "gpe0_en" = "0x20800007" - - register "ide_legacy_combined" = "0x1" - register "ide_enable_primary" = "0x1" - register "ide_enable_secondary" = "0x0" + register "gpi13_routing" = "2" + register "gpi12_routing" = "2" + register "gpi8_routing" = "2" + register "sata_ahci" = "0x0"
- device pci 1b.0 on end # High Definition Audio - device pci 1c.0 on end # PCIe - device pci 1c.1 on end # PCIe - device pci 1c.2 on end # PCIe - #device pci 1c.3 off end # PCIe port 4 - #device pci 1c.4 off end # PCIe port 5 - #device pci 1c.5 off end # PCIe port 6 - device pci 1d.0 on end # USB UHCI - device pci 1d.1 on end # USB UHCI - device pci 1d.2 on end # USB UHCI - device pci 1d.3 on end # USB UHCI - device pci 1d.7 on end # USB2 EHCI - device pci 1e.0 on - chip southbridge/ti/pci7420 - register "smartcard_enabled" = "0x0" - device pci 3.0 on end - device pci 3.1 on end - device pci 3.2 on end - device pci 3.3 off end # smartcard - end - end # PCI bridge - #device pci 1e.2 off end # AC'97 Audio - #device pci 1e.3 off end # AC'97 Modem - device pci 1f.0 on # LPC bridge - chip superio/smsc/lpc47n227 - device pnp 2e.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 5 - end - device pnp 2e.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 off # Keyboard+Mouse - # io 0x60 = 0x60 - # io 0x62 = 0x64 - # irq 0x70 = 1 - # irq 0x72 = 12 - end - end - chip superio/renesas/m3885x - device pnp ff.1 on # dummy address + register "gpe0_en" = "0x11000006" + + device pci 1b.0 on end # Audio Controller + device pci 1c.0 on end # Ethernet + device pci 1c.1 on end # Atheros WLAN + device pci 1d.0 on end # USB UHCI + device pci 1d.1 on end # USB UHCI + device pci 1d.2 on end # USB UHCI + device pci 1d.3 on end # USB UHCI + device pci 1d.7 on end # USB2 EHCI + device pci 1f.0 on # PCI-LPC bridge + chip ec/lenovo/pmh7 + device pnp ff.1 on # dummy end end chip ec/acpi + device pnp ff.2 on # dummy + io 0x60 = 0x62 + io 0x62 = 0x66 + io 0x64 = 0x1600 + io 0x66 = 0x1604 + end + end + chip superio/nsc/pc87382 + device pnp 164e.2 on # IR + io 0x60 = 0x2f8 + end + + device pnp 164e.3 off # Serial Port + io 0x60 = 0x3f8 + end + + device pnp 164e.7 on # GPIO + io 0x60 = 0x1680 + end + + device pnp 164e.19 on # DLPC + io 0x60 = 0x164c + end end
- end - #device pci 1f.1 off end # IDE + chip superio/nsc/pc87392 + device pnp 2e.0 off #FDC + end + + device pnp 2e.1 on # Parallel Port + io 0x60 = 0x3bc + irq 0x70 = 7 + end + + device pnp 2e.2 off # Serial Port / IR + io 0x60 = 0x2f8 + irq 0x70 = 4 + end + + device pnp 2e.3 on # Serial Port + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + + device pnp 2e.7 on # GPIO + io 0x60 = 0x1620 + end + + device pnp 2e.a off # WDT + end + end + end + device pci 1f.1 off end # IDE device pci 1f.2 on end # SATA device pci 1f.3 on end # SMBus - #device pci 1f.4 off end # Realtek ID Codec - end - end + end + chip southbridge/ricoh/rl5c476 + end + end end
Modified: trunk/src/mainboard/lenovo/x60/irq_tables.c ============================================================================== --- trunk/src/mainboard/roda/rk886ex/irq_tables.c Mon Feb 14 20:24:37 2011 (r6357) +++ trunk/src/mainboard/lenovo/x60/irq_tables.c Mon Feb 14 21:02:47 2011 (r6360) @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2007-2008 coresystems GmbH + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -22,37 +22,36 @@ #include <arch/pirq_routing.h>
const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*18, /* There can be total 18 devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x1f<<3)|0x0, /* Where the interrupt router lies (dev) */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x27b0, /* Device */ - 0, /* miniport */ + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * 15, /* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x1f << 3) | 0x0, /* Interrupt router dev */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x122e, /* Device */ + 0, /* Miniport */ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0xf, /* u8 checksum. */ + 0xf5, /* Checksum (has to be set to some value that + * would give 0 after the sum of all bytes + * for this structure (including checksum). + */ { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x01<<3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x0, 0x0}, // PCIe? - {0x00,(0x02<<3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // VGA - {0x00,(0x1e<<3)|0x0, {{0x61, 0xdcf8}, {0x68, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // PCI bridge - {0x00,(0x1f<<3)|0x0, {{0x62, 0xdcf8}, {0x63, 0xdcd8}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // LPC - {0x00,(0x1d<<3)|0x0, {{0x6b, 0xdcf8}, {0x63, 0xdcd8}, {0x62, 0xdcf8}, {0x60, 0x0dcf8}}, 0x0, 0x0}, // USB#1 - {0x00,(0x1b<<3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // Audio device - {0x00,(0x1c<<3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x2, 0x0}, // PCIe bridge - {0x04,(0x00<<3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // Firewire - {0x04,(0x01<<3)|0x0, {{0x68, 0xdcf8}, {0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0x0dcf8}}, 0x1, 0x0}, // PCI Bridge - {0x04,(0x02<<3)|0x0, {{0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0x0dcf8}}, 0x2, 0x0}, - {0x04,(0x03<<3)|0x0, {{0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0xdcf8}, {0x69, 0x0dcf8}}, 0x3, 0x0}, - {0x04,(0x04<<3)|0x0, {{0x6b, 0xdcf8}, {0x68, 0xdcf8}, {0x69, 0xdcf8}, {0x6a, 0x0dcf8}}, 0x4, 0x0}, - {0x04,(0x05<<3)|0x0, {{0x63, 0xdcd8}, {0x62, 0xdcf8}, {0x61, 0xdcf8}, {0x60, 0x0dcf8}}, 0x5, 0x0}, - {0x04,(0x06<<3)|0x0, {{0x62, 0xdcf8}, {0x61, 0xdcf8}, {0x60, 0xdcf8}, {0x63, 0x0dcd8}}, 0x6, 0x0}, - {0x04,(0x09<<3)|0x0, {{0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0x0dcf8}}, 0x9, 0x0}, - {0x01,(0x00<<3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x0, 0x0}, // Ethernet 8168 - {0x02,(0x00<<3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x9, 0x0}, - {0x03,(0x00<<3)|0x0, {{0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0xdcd8}, {0x60, 0x0dcf8}}, 0xa, 0x0}, + /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, (0x02 << 3) | 0x0, {{0x00, 0xdef8}, {0x61, 0x1cf8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* VGA 0:02.0 */ + {0x00, (0x1b << 3) | 0x0, {{0x00, 0xdef8}, {0x61, 0x1cf8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* HD Audio 0:1b.0 */ + {0x00, (0x1c << 3) | 0x0, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.0 */ + {0x00, (0x1c << 3) | 0x1, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.1 */ + {0x00, (0x1c << 3) | 0x2, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.2 */ + {0x00, (0x1c << 3) | 0x3, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.3 */ + {0x00, (0x1d << 3) | 0x0, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.0 */ + {0x00, (0x1d << 3) | 0x1, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.1 */ + {0x00, (0x1d << 3) | 0x2, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.2 */ + {0x00, (0x1d << 3) | 0x3, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.3 */ + {0x00, (0x1e << 3) | 0x0, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* PCI 0:1e.0 */ + {0x00, (0x1f << 3) | 0x0, {{0x6b, 0x1cf8}, {0x60, 0x1cf8}, {0x60, 0x1cf8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* LPC 0:1f.0 */ + {0x00, (0x1f << 3) | 0x1, {{0x6b, 0x1cf8}, {0x60, 0x1cf8}, {0x60, 0x1cf8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* IDE 0:1f.1 */ + {0x00, (0x1f << 3) | 0x2, {{0x6b, 0x1cf8}, {0x60, 0x1cf8}, {0x60, 0x1cf8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* SATA 0:1f.2 */ } };
@@ -60,4 +59,3 @@ { return copy_pirq_routing_table(addr); } -
Modified: trunk/src/mainboard/lenovo/x60/mainboard.c ============================================================================== --- trunk/src/mainboard/roda/rk886ex/mainboard.c Mon Feb 14 20:24:37 2011 (r6357) +++ trunk/src/mainboard/lenovo/x60/mainboard.c Mon Feb 14 21:02:47 2011 (r6360) @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 Sven Schnelle svens@stackframe.org * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -24,118 +25,59 @@ #include <arch/io.h> #include <boot/tables.h> #include <delay.h> -#if CONFIG_PCI_OPTION_ROM_RUN_YABEL -#include <x86emu/x86emu.h> -#endif #include <arch/coreboot_tables.h> #include "chip.h" - +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <arch/io.h> +#include <ec/lenovo/pmh7/pmh7.h> #include <ec/acpi/ec.h> -#include "m3885.h" - -#define DUMP_RUNTIME_REGISTERS 0
static void backlight_enable(void) { -#if 0 -// Disabled, don't let the X9511 burn out - int i; - - /* P56 is Brightness Up, and it needs a Pulse instead of a - * Level - */ - for (i=0; i < 28; i++) { - //m3885_gpio(M3885_GPIO_PULSE|M3885_GPIO_SET|M3885_GPIO_P56); - m3885_gpio(M3885_GPIO_PULSE|M3885_GPIO_TOGGLE|M3885_GPIO_P56); - } -#endif - printk(BIOS_DEBUG, "Display I/O: 0x%02x\n", inb(0x60f)); + pmh7_register_set_bit(0x50, 5); }
-#if CONFIG_PCI_OPTION_ROM_RUN_YABEL -static int int15_handler(void) +static void trackpoint_enable(void) { - u8 display_id; -#define BOOT_DISPLAY_DEFAULT 0 -#define BOOT_DISPLAY_CRT (1 << 0) -#define BOOT_DISPLAY_TV (1 << 1) -#define BOOT_DISPLAY_EFP (1 << 2) -#define BOOT_DISPLAY_LCD (1 << 3) -#define BOOT_DISPLAY_CRT2 (1 << 4) -#define BOOT_DISPLAY_TV2 (1 << 5) -#define BOOT_DISPLAY_EFP2 (1 << 6) -#define BOOT_DISPLAY_LCD2 (1 << 7) - - printk(BIOS_DEBUG, "%s: AX=%04x BX=%04x CX=%04x DX=%04x\n", - __func__, M.x86.R_AX, M.x86.R_BX, M.x86.R_CX, M.x86.R_DX); - - switch (M.x86.R_AX) { - case 0x5f35: /* Boot Display */ - M.x86.R_AX = 0x005f; // Success - M.x86.R_CL = BOOT_DISPLAY_DEFAULT; - break; - case 0x5f40: /* Boot Panel Type */ - /* LCD panel type is SIO GPIO40-43 */ - // display_id = inb(0x60f) & 0x0f; - display_id = 3; - // M.x86.R_AX = 0x015f; // Supported but failed - M.x86.R_AX = 0x005f; // Success - M.x86.R_CL = display_id; - break; - default: - /* Interrupt was not handled */ - return 0; - } - - /* Interrupt handled */ - return 1; + ec_write(0x0b, 0x03); }
-static void int15_install(void) +static void wlan_enable(void) { - typedef int (* yabel_handleIntFunc)(void); - extern yabel_handleIntFunc yabel_intFuncArray[256]; - yabel_intFuncArray[0x15] = int15_handler; + ec_write(0x3a, 0x20); } -#endif - -#if DUMP_RUNTIME_REGISTERS -static void dump_runtime_registers(void) -{ - int i; - - printk(BIOS_DEBUG, "SuperIO runtime register block:\n"); - for (i=0; i<0x10; i++) - printk(BIOS_DEBUG, "%02x ", i); - printk(BIOS_DEBUG, "\n"); - for (i=0; i<0x10; i++) - printk(BIOS_DEBUG, "%02x ", inb(0x600 +i)); - printk(BIOS_DEBUG, "\n"); -} -#endif
static void mainboard_enable(device_t dev) { - /* Configure the MultiKey controller */ - // m3885_configure_multikey(); - - /* Enable LCD Backlight */ backlight_enable(); - - /* Disable Dummy DCC -> GP45 = 1 */ - outb(inb(0x60f) | (1 << 5), 0x60f); - -#if CONFIG_PCI_OPTION_ROM_RUN_YABEL - /* Install custom int15 handler for VGA OPROM */ - int15_install(); -#endif -#if DUMP_RUNTIME_REGISTERS - dump_runtime_registers(); -#endif + trackpoint_enable(); + /* FIXME: this should be ACPI's task + * but for now, enable it here */ + wlan_enable(); + + /* enable ACPI events */ + ec_write(0x00, 0xa6); + ec_write(0x01, 0x05); + + ec_write(0x02, 0xa0); + ec_write(0x03, 0x05); + + /* set mask of enabled beeps */ + ec_write(0x04, 0xfe); + ec_write(0x05, 0x96); + + /* Unknown, but required for hotkeys + Maybe a mask for enabled keys? */ + + ec_write(0x12, 0xff); + ec_write(0x13, 0xff); + ec_write(0x14, 0xf4); + ec_write(0x15, 0x3c); }
struct chip_operations mainboard_ops = { - CHIP_NAME("Roda Computer GmbH RK886EX Rugged Notebook (ROCKY3+)") + CHIP_NAME(CONFIG_MAINBOARD_VENDOR " " CONFIG_MAINBOARD_PART_NUMBER) .enable_dev = mainboard_enable, };
Modified: trunk/src/mainboard/lenovo/x60/mptable.c ============================================================================== --- trunk/src/mainboard/roda/rk886ex/mptable.c Mon Feb 14 20:24:37 2011 (r6357) +++ trunk/src/mainboard/lenovo/x60/mptable.c Mon Feb 14 21:02:47 2011 (r6360) @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2007-2008 coresystems GmbH + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -46,35 +46,29 @@ /* Legacy Interrupts */ mptable_add_isa_interrupts(mc, isa_bus, 0x2, 0);
- /* Builtin devices on Bus 0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x8, 0x2, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x7d, 0x2, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x74, 0x2, 0x17); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x75, 0x2, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x76, 0x2, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x77, 0x2, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x6c, 0x2, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x70, 0x2, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x71, 0x2, 0x11); - - /* Firewire 4:0.0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, 0x0, 0x2, 0x10); - - // riser slot top 5:8.0 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x20, 0x2, 0x14); - // riser slot middle 5:9.0 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x24, 0x2, 0x15); - // riser slot bottom 5:a.0 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x28, 0x2, 0x16); - - /* Onboard Ethernet */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x1, 0x0, 0x2, 0x10); - - /* Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, MP_APIC_ALL, 0x0); - smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, MP_APIC_ALL, 0x1); + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, isa_bus, 0x00, MP_APIC_ALL, 0x00); + smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x00, MP_APIC_ALL, 0x01); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x01 << 2), 0x02, 0x10); /* PCIe root 0.02.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x02 << 2), 0x02, 0x10); /* VGA 0.02.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1b << 2), 0x02, 0x11); /* HD Audio 0:1b.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2), 0x02, 0x14); /* PCIe 0:1c.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2) | 0x01, 0x02, 0x15); /* PCIe 0:1c.1 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2) | 0x02, 0x02, 0x16); /* PCIe 0:1c.2 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2) | 0x03, 0x02, 0x17); /* PCIe 0:1c.3 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) , 0x02, 0x10); /* USB 0:1d.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) | 0x01, 0x02, 0x11); /* USB 0:1d.1 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) | 0x02, 0x02, 0x12); /* USB 0:1d.2 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) | 0x03, 0x02, 0x13); /* USB 0:1d.3 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1f << 2) , 0x02, 0x17); /* LPC 0:1f.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1f << 2) | 0x01, 0x02, 0x10); /* IDE 0:1f.1 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1f << 2) | 0x02, 0x02, 0x10); /* SATA 0:1f.2 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x05, (0x00 << 2) | 0x00, 0x02, 0x10); /* Cardbus 5:00.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x05, (0x00 << 2) | 0x01, 0x02, 0x11); /* Firewire 5:00.1 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x05, (0x00 << 2) | 0x02, 0x02, 0x12); /* SDHC 5:00.2 */ + + smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_HIGH, isa_bus, 0, MP_APIC_ALL, 0); + smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_HIGH, isa_bus, 0, MP_APIC_ALL, 1);
- /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
Modified: trunk/src/mainboard/lenovo/x60/romstage.c ============================================================================== --- trunk/src/mainboard/roda/rk886ex/romstage.c Mon Feb 14 20:24:37 2011 (r6357) +++ trunk/src/mainboard/lenovo/x60/romstage.c Mon Feb 14 21:02:47 2011 (r6360) @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 Sven Schnelle svens@stackframe.org * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -36,80 +37,146 @@ #include "northbridge/intel/i945/i945.h" #include "northbridge/intel/i945/raminit.h" #include "southbridge/intel/i82801gx/i82801gx.h" -#include "option_table.h"
void setup_ich7_gpios(void) { printk(BIOS_DEBUG, " GPIOS..."); - /* General Registers */ - outl(0xbfc0f7c0, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ - outl(0x70a87d83, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ - // ------------------------------------------------------------ - // 0 - GPO6 - Enable power of SATA channel 0 - // 0 - GPO9 - Wireless LAN power on - // 0 - GPO15 - FAN on - // 1 - GPO22 - FWH WP - // 1 - GPO24 - GPS on - // 0 - GPO25 - External Antenna Mux on - // 0 - GPO26 - BT on - // 0 - GPO27 - GSM on - outl(0x01400000, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ - // ------------------------------------------------------------ + + /* X60 GPIO: + 1: HDD_PRESENCE# + 6: Unknown (Pulled high by R215 to VCC3B) + 7: BDC_PRESENCE# + 8: H8_WAKE# + 9: RTC_BAT_IN# + 10: Unknown (Pulled high by R700 to VCC3M + 12: H8SCI# + 13: SLICE_ON_3M# + 14: Unknown (Pulled high by R321 to VCC3) + 15: Unknown (Pulled high by R258 to VCC3) + 19: Unknown (Pulled low by R594) + 21: Unknown (Pulled high by R145 to VCC3) + 22: FWH_WP# + 25: MDC_KILL# + 33: HDD_PRESENCE_2# + 35: CLKREQ_SATA# + 36: PLANARID0 + 37: PLANARID1 + 38: PLANARID2 + 39: PLANARID3 + 48: FWH_TBL# + */ + + outl(0x1f40f7c2, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ + outl(0xe0e8ffc3, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ + outl(0xfbf6ddfd, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ /* Output Control Registers */ - outl(0x00000000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */ + outl(0x00040000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */ /* Input Control Registers */ - outl(0x00002180, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ - outl(0x000100e8, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ - outl(0x00000030, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */ - // ------------------------------------------------------------ - // 1 - GPO48 - FWH TBL# - outl(0x00010000, DEFAULT_GPIOBASE + 0x38); /* GP_LVL */ - // ------------------------------------------------------------ + outl(0x000039ff, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ + outl(0x000100f2, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ + outl(0x000000f0, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */ + outl(0x00030043, DEFAULT_GPIOBASE + 0x38); /* GP_LVL */ }
static void ich7_enable_lpc(void) { - int lpt_en = 0; - if (read_option(CMOS_VSTART_lpt, CMOS_VLEN_lpt, 0) != 0) { - lpt_en = 1<<2; // enable LPT - } // Enable Serial IRQ pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x64, 0xd0); // decode range - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0007); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0210); // decode range - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x3f0b | lpt_en); - // Enable 0x02e0 - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x84, 0x02e1); - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x86, 0x001c); - // COM3 decode - pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x88, 0x00fc0601); - // COM4 decode - pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x8c, 0x00040069); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x1f0d); + + /* range 0x1600 - 0x167f */ + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x84, 0x1601); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x86, 0x007c); + + /* range 0x15e0 - 0x10ef */ + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x88, 0x15e1); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8a, 0x000c); + + /* range 0x1680 - 0x169f */ + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8c, 0x1681); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8e, 0x001c); }
-/* This box has two superios, so enabling serial becomes slightly excessive. - * We disable a lot of stuff to make sure that there are no conflicts between - * the two. Also set up the GPIOs from the beginning. This is the "no schematic - * but safe anyways" method. - */ -static inline void pnp_enter_ext_func_mode(device_t dev) +static void pnp_write_register(device_t dev, int reg, int val) { unsigned int port = dev >> 8; - outb(0x55, port); + outb(reg, port); + outb(val, port+1); }
-static void pnp_exit_ext_func_mode(device_t dev) +static void dock_write_register(int reg, int value) { - unsigned int port = dev >> 8; - outb(0xaa, port); + outb(reg, 0x164e); + outb(value, 0x164f); + /* original software reads the chip id after every + I/O operation. Not sure if they are doing it for + some code switching depending on hardware or just + to have a delay after every operation. + + Do it the same way for now, we may remove it later + if it isn't needed + */ + outb(0x20, 0x164e); + inb(0x164f); }
-static void pnp_write_register(device_t dev, int reg, int val) +static void dock_dlpc_init(void) { - unsigned int port = dev >> 8; - outb(reg, port); - outb(val, port+1); + /* Select DLPC module */ + dock_write_register(0x07, 0x19); + /* DLPC Base Address 0x164c */ + dock_write_register(0x60, 0x16); + dock_write_register(0x61, 0x4c); + /* Activate DLPC */ + dock_write_register(0x30, 0x01); + outb(0x07, 0x164c); + + while(!(inb(0x164c) & 8)) + udelay(100 * 100); +} + +static void dock_gpio_set_mode(int port, int mode) +{ + dock_write_register(0xf0, port); + dock_write_register(0xf1, mode); + +} + +static void dock_gpio_init(void) +{ + /* Select GPIO module */ + dock_write_register(0x07, 0x07); + /* GPIO Base Address 0x1680 */ + dock_write_register(0x60, 0x16); + dock_write_register(0x61, 0x80); + + /* Activate GPIO */ + dock_write_register(0x30, 0x01); + + dock_gpio_set_mode(0x00, 3); + dock_gpio_set_mode(0x01, 3); + dock_gpio_set_mode(0x02, 0); + dock_gpio_set_mode(0x03, 3); + dock_gpio_set_mode(0x04, 4); + dock_gpio_set_mode(0x20, 4); + dock_gpio_set_mode(0x21, 4); + dock_gpio_set_mode(0x23, 4); +} + +static void connect_dock(void) +{ + /* Enable 14.318MHz CLK on CLKIN */ + dock_write_register(0x29, 0x00); + dock_write_register(0x29, 0xa0); + dock_gpio_init(); + /* Assert D_PLTRST# */ + outb(0xfe, 0x1680); + dock_dlpc_init(); + /* Deassert D_PLTRST# */ + outb(0xff, 0x1680); }
static void early_superio_config(void) @@ -117,53 +184,36 @@ device_t dev;
dev=PNP_DEV(0x2e, 0x00); + pnp_write_register(dev, 0x29, 0x06);
- pnp_enter_ext_func_mode(dev); - pnp_write_register(dev, 0x01, 0x94); // Extended Parport modes - pnp_write_register(dev, 0x02, 0x88); // UART power on - pnp_write_register(dev, 0x03, 0x72); // Floppy - pnp_write_register(dev, 0x04, 0x01); // EPP + SPP - pnp_write_register(dev, 0x14, 0x03); // Floppy - pnp_write_register(dev, 0x20, (0x3f0 >> 2)); // Floppy - pnp_write_register(dev, 0x23, (0x378 >> 2)); // PP base - pnp_write_register(dev, 0x24, (0x3f8 >> 2)); // UART1 base - pnp_write_register(dev, 0x25, (0x2f8 >> 2)); // UART2 base - pnp_write_register(dev, 0x26, (2 << 4) | 0); // FDC + PP DMA - pnp_write_register(dev, 0x27, (6 << 4) | 7); // FDC + PP DMA - pnp_write_register(dev, 0x28, (4 << 4) | 3); // UART1,2 IRQ - /* These are the SMI status registers in the SIO: */ - pnp_write_register(dev, 0x30, (0x600 >> 4)); // Runtime Register Block Base - - pnp_write_register(dev, 0x31, 0x00); // GPIO1 DIR - pnp_write_register(dev, 0x32, 0x00); // GPIO1 POL - pnp_write_register(dev, 0x33, 0x40); // GPIO2 DIR - pnp_write_register(dev, 0x34, 0x00); // GPIO2 POL - pnp_write_register(dev, 0x35, 0xff); // GPIO3 DIR - pnp_write_register(dev, 0x36, 0x00); // GPIO3 POL - pnp_write_register(dev, 0x37, 0xe0); // GPIO4 DIR - pnp_write_register(dev, 0x38, 0x00); // GPIO4 POL - pnp_write_register(dev, 0x39, 0x80); // GPIO4 POL - - pnp_exit_ext_func_mode(dev); + /* Enable COM1 */ + pnp_write_register(dev, 0x07, 0x03); + pnp_write_register(dev, 0x60, 0x03); + pnp_write_register(dev, 0x61, 0xf8); + pnp_write_register(dev, 0x30, 0x01); }
static void rcba_config(void) { /* Set up virtual channel 0 */ - //RCBA32(0x0014) = 0x80000001; - //RCBA32(0x001c) = 0x03128010; + RCBA32(0x0014) = 0x80000001; + RCBA32(0x001c) = 0x03128010;
/* Device 1f interrupt pin register */ - RCBA32(0x3100) = 0x00042220; - /* Device 1d interrupt pin register */ - RCBA32(0x310c) = 0x00214321; + RCBA32(0x3100) = 0x00001230; + RCBA32(0x3108) = 0x40004321; + + /* PCIe Interrupts */ + RCBA32(0x310c) = 0x00004321; + /* HD Audio Interrupt */ + RCBA32(0x3110) = 0x00000002;
/* dev irq route register */ - RCBA16(0x3140) = 0x0232; - RCBA16(0x3142) = 0x3246; - RCBA16(0x3144) = 0x0237; - RCBA16(0x3146) = 0x3201; - RCBA16(0x3148) = 0x3216; + RCBA16(0x3140) = 0x1007; + RCBA16(0x3142) = 0x0076; + RCBA16(0x3144) = 0x3210; + RCBA16(0x3146) = 0x7654; + RCBA16(0x3148) = 0x0010;
/* Enable IOAPIC */ RCBA8(0x31ff) = 0x03; @@ -172,22 +222,8 @@ RCBA32(0x3400) = (1 << 2);
/* Disable unused devices */ - RCBA32(0x3418) = FD_PCIE6 | FD_PCIE5 | FD_PCIE3 | FD_PCIE2 | - FD_INTLAN | FD_ACMOD | FD_HDAUD | FD_PATA; + RCBA32(0x3418) = FD_PCIE6 | FD_PCIE5 | FD_INTLAN | FD_ACMOD | FD_ACAUD; RCBA32(0x3418) |= (1 << 0); // Required. - - /* Enable PCIe Root Port Clock Gate */ - // RCBA32(0x341c) = 0x00000001; - - /* This should probably go into the ACPI OS Init trap */ - - /* Set up I/O Trap #0 for 0xfe00 (SMIC) */ - RCBA32(0x1e84) = 0x00020001; - RCBA32(0x1e80) = 0x0000fe01; - - /* Set up I/O Trap #3 for 0x800-0x80c (Trap) */ - RCBA32(0x1e9c) = 0x000200f0; - RCBA32(0x1e98) = 0x000c0801; }
static void early_ich7_init(void) @@ -244,13 +280,6 @@ RCBA32(0x2034) = reg32; }
-static void init_artec_dongle(void) -{ - // Enable 4MB decoding - outb(0xf1, 0x88); - outb(0xf4, 0x88); -} - #include <cbmem.h>
void main(unsigned long bist) @@ -267,6 +296,9 @@ pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, 0);
ich7_enable_lpc(); + + connect_dock(); + early_superio_config();
/* Set up the console */ @@ -293,9 +325,6 @@ */ i945_early_initialization();
- /* This has to happen after i945_early_initialization() */ - init_artec_dongle(); - /* Read PM1_CNT */ reg32 = inl(DEFAULT_PMBASE + 0x04); printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32); @@ -377,4 +406,6 @@ pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafed00d); } #endif + /* Set legacy Brightness control to full brightness */ + pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, 0xff); }
-
repository service